Diff: TARGET_KL82Z/TOOLCHAIN_IAR/qspi_device.h

Revision:

171:3a7713b1edbc

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_KL82Z/TOOLCHAIN_IAR/qspi_device.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,77 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2018, ARM Limited
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _FSL_MBED_QSPI_DEVICE_H_
+#define _FSL_MBED_QSPI_DEVICE_H_
+
+#include "fsl_qspi.h"
+
+#define FLASH_SIZE            0x01000000U
+#define FLASH_PAGE_SIZE       256U
+
+qspi_flash_config_t single_config = {
+    .flashA1Size = FLASH_SIZE, /* 16MB */
+    .flashA2Size = 0,
+#if defined(FSL_FEATURE_QSPI_SUPPORT_PARALLEL_MODE) && (FSL_FEATURE_QSPI_SUPPORT_PARALLEL_MODE)
+    .flashB1Size = FLASH_SIZE,
+    .flashB2Size = 0,
+#endif
+#if !defined(FSL_FEATURE_QSPI_HAS_NO_TDH) || (!FSL_FEATURE_QSPI_HAS_NO_TDH)
+    .dataHoldTime = 0,
+#endif
+    .CSHoldTime = 0,
+    .CSSetupTime = 0,
+    .cloumnspace = 0,
+    .dataLearnValue = 0,
+    .endian = kQSPI_64LittleEndian,
+    .enableWordAddress = false
+};
+
+/* Pre-defined LUT definitions */
+uint32_t lut[FSL_FEATURE_QSPI_LUT_DEPTH] =
+    {
+        /* Seq0 : Read */
+        /* CMD:   0x03 - Read, Single pad */
+        /* ADDR:  0x18 - 24bit address, Single pad */
+        /* READ:  0x80 - Read 128 bytes, Single pad */
+        /* JUMP_ON_CS: 0 */
+        [0] = QSPI_LUT_SEQ(QSPI_CMD, QSPI_PAD_1, 0x03, QSPI_ADDR, QSPI_PAD_1, 0x18),
+        [1] = QSPI_LUT_SEQ(QSPI_READ, QSPI_PAD_1, 0x80, QSPI_JMP_ON_CS, QSPI_PAD_1, 0x0),
+
+        /* Seq1: Page Program */
+        /* CMD:    0x02 - Page Program, Single pad */
+        /* ADDR:   0x18 - 24bit address, Single pad */
+        /* WRITE:  0x80 - Write 128 bytes at one pass, Single pad */
+        [4] = QSPI_LUT_SEQ(QSPI_CMD, QSPI_PAD_1, 0x02, QSPI_ADDR, QSPI_PAD_1, 0x18),
+        [5] = QSPI_LUT_SEQ(QSPI_WRITE, QSPI_PAD_1, 0x80, 0, 0, 0),
+
+        /* Match MISRA rule */
+        [63] = 0
+    };
+
+#endif /* _FSL_MBED_QSPI_DEVICE_H_*/