Diff: TARGET_KL82Z/TOOLCHAIN_IAR/fsl_smc.h

Revision:

171:3a7713b1edbc

Parent:

145:64910690c574

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_KL82Z/TOOLCHAIN_IAR/fsl_smc.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,418 @@
+/*
+ * Copyright (c) 2015, Freescale Semiconductor, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * o Redistributions of source code must retain the above copyright notice, this list
+ *   of conditions and the following disclaimer.
+ *
+ * o Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ *
+ * o Neither the name of Freescale Semiconductor, Inc. nor the names of its
+ *   contributors may be used to endorse or promote products derived from this
+ *   software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _FSL_SMC_H_
+#define _FSL_SMC_H_
+
+#include "fsl_common.h"
+
+/*! @addtogroup smc */
+/*! @{ */
+
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*! @name Driver version */
+/*@{*/
+/*! @brief SMC driver version 2.0.2. */
+#define FSL_SMC_DRIVER_VERSION (MAKE_VERSION(2, 0, 2))
+/*@}*/
+
+/*!
+ * @brief Power Modes Protection
+ */
+typedef enum _smc_power_mode_protection
+{
+#if (defined(FSL_FEATURE_SMC_HAS_VERY_LOW_LEAKAGE_STOP_MODE) && FSL_FEATURE_SMC_HAS_VERY_LOW_LEAKAGE_STOP_MODE)
+    kSMC_AllowPowerModeVlls = SMC_PMPROT_AVLLS_MASK, /*!< Allow Very-Low-Leakage Stop Mode. */
+#endif
+#if (defined(FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE) && FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE)
+    kSMC_AllowPowerModeLls = SMC_PMPROT_ALLS_MASK, /*!< Allow Low-Leakage Stop Mode.      */
+#endif                                             /* FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE */
+    kSMC_AllowPowerModeVlp = SMC_PMPROT_AVLP_MASK, /*!< Allow Very-Low-Power Mode.        */
+#if (defined(FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE) && FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE)
+    kSMC_AllowPowerModeHsrun = SMC_PMPROT_AHSRUN_MASK, /*!< Allow High Speed Run mode.        */
+#endif                                                 /* FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE */
+    kSMC_AllowPowerModeAll = (0U
+#if (defined(FSL_FEATURE_SMC_HAS_VERY_LOW_LEAKAGE_STOP_MODE) && FSL_FEATURE_SMC_HAS_VERY_LOW_LEAKAGE_STOP_MODE)
+                              |
+                              SMC_PMPROT_AVLLS_MASK
+#endif
+#if (defined(FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE) && FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE)
+                              |
+                              SMC_PMPROT_ALLS_MASK
+#endif /* FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE */
+                              |
+                              SMC_PMPROT_AVLP_MASK
+#if (defined(FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE) && FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE)
+                              |
+                              kSMC_AllowPowerModeHsrun
+#endif                          /* FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE */
+                              ) /*!< Allow all power mode.              */
+} smc_power_mode_protection_t;
+
+/*!
+ * @brief Power Modes in PMSTAT
+ */
+typedef enum _smc_power_state
+{
+    kSMC_PowerStateRun = 0x01U << 0U,  /*!< 0000_0001 - Current power mode is RUN   */
+    kSMC_PowerStateStop = 0x01U << 1U, /*!< 0000_0010 - Current power mode is STOP  */
+    kSMC_PowerStateVlpr = 0x01U << 2U, /*!< 0000_0100 - Current power mode is VLPR  */
+    kSMC_PowerStateVlpw = 0x01U << 3U, /*!< 0000_1000 - Current power mode is VLPW  */
+    kSMC_PowerStateVlps = 0x01U << 4U, /*!< 0001_0000 - Current power mode is VLPS  */
+#if (defined(FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE) && FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE)
+    kSMC_PowerStateLls = 0x01U << 5U, /*!< 0010_0000 - Current power mode is LLS   */
+#endif                                /* FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE */
+#if (defined(FSL_FEATURE_SMC_HAS_VERY_LOW_LEAKAGE_STOP_MODE) && FSL_FEATURE_SMC_HAS_VERY_LOW_LEAKAGE_STOP_MODE)
+    kSMC_PowerStateVlls = 0x01U << 6U, /*!< 0100_0000 - Current power mode is VLLS  */
+#endif
+#if (defined(FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE) && FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE)
+    kSMC_PowerStateHsrun = 0x01U << 7U /*!< 1000_0000 - Current power mode is HSRUN */
+#endif                                 /* FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE */
+} smc_power_state_t;
+
+/*!
+ * @brief Run mode definition
+ */
+typedef enum _smc_run_mode
+{
+    kSMC_RunNormal = 0U, /*!< normal RUN mode.             */
+    kSMC_RunVlpr = 2U,   /*!< Very-Low-Power RUN mode.     */
+#if (defined(FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE) && FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE)
+    kSMC_Hsrun = 3U /*!< High Speed Run mode (HSRUN). */
+#endif              /* FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE */
+} smc_run_mode_t;
+
+/*!
+ * @brief Stop mode definition
+ */
+typedef enum _smc_stop_mode
+{
+    kSMC_StopNormal = 0U, /*!< Normal STOP mode.           */
+    kSMC_StopVlps = 2U,   /*!< Very-Low-Power STOP mode.   */
+#if (defined(FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE) && FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE)
+    kSMC_StopLls = 3U, /*!< Low-Leakage Stop mode.      */
+#endif                 /* FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE */
+#if (defined(FSL_FEATURE_SMC_HAS_VERY_LOW_LEAKAGE_STOP_MODE) && FSL_FEATURE_SMC_HAS_VERY_LOW_LEAKAGE_STOP_MODE)
+    kSMC_StopVlls = 4U /*!< Very-Low-Leakage Stop mode. */
+#endif
+} smc_stop_mode_t;
+
+#if (defined(FSL_FEATURE_SMC_USE_VLLSCTRL_REG) && FSL_FEATURE_SMC_USE_VLLSCTRL_REG) ||     \
+    (defined(FSL_FEATURE_SMC_USE_STOPCTRL_VLLSM) && FSL_FEATURE_SMC_USE_STOPCTRL_VLLSM) || \
+    (defined(FSL_FEATURE_SMC_HAS_LLS_SUBMODE) && FSL_FEATURE_SMC_HAS_LLS_SUBMODE)
+/*!
+ * @brief VLLS/LLS stop sub mode definition
+ */
+typedef enum _smc_stop_submode
+{
+    kSMC_StopSub0 = 0U, /*!< Stop submode 0, for VLLS0/LLS0. */
+    kSMC_StopSub1 = 1U, /*!< Stop submode 1, for VLLS1/LLS1. */
+    kSMC_StopSub2 = 2U, /*!< Stop submode 2, for VLLS2/LLS2. */
+    kSMC_StopSub3 = 3U  /*!< Stop submode 3, for VLLS3/LLS3. */
+} smc_stop_submode_t;
+#endif
+
+/*!
+ * @brief Partial STOP option
+ */
+typedef enum _smc_partial_stop_mode
+{
+    kSMC_PartialStop = 0U,  /*!< STOP - Normal Stop mode*/
+    kSMC_PartialStop1 = 1U, /*!< Partial Stop with both system and bus clocks disabled*/
+    kSMC_PartialStop2 = 2U, /*!< Partial Stop with system clock disabled and bus clock enabled*/
+} smc_partial_stop_option_t;
+
+/*!
+ * @brief SMC configuration status
+ */
+enum _smc_status
+{
+    kStatus_SMC_StopAbort = MAKE_STATUS(kStatusGroup_POWER, 0) /*!< Entering Stop mode is abort*/
+};
+
+#if (defined(FSL_FEATURE_SMC_HAS_VERID) && FSL_FEATURE_SMC_HAS_VERID)
+/*!
+ * @brief IP version ID definition.
+ */
+typedef struct _smc_version_id
+{
+    uint16_t feature; /*!< Feature Specification Number. */
+    uint8_t minor;    /*!< Minor version number.         */
+    uint8_t major;    /*!< Major version number.         */
+} smc_version_id_t;
+#endif /* FSL_FEATURE_SMC_HAS_VERID */
+
+#if (defined(FSL_FEATURE_SMC_HAS_PARAM) && FSL_FEATURE_SMC_HAS_PARAM)
+/*!
+ * @brief IP parameter definition.
+ */
+typedef struct _smc_param
+{
+    bool hsrunEnable; /*!< HSRUN mode enable. */
+    bool llsEnable;   /*!< LLS mode enable.   */
+    bool lls2Enable;  /*!< LLS2 mode enable.  */
+    bool vlls0Enable; /*!< VLLS0 mode enable. */
+} smc_param_t;
+#endif /* FSL_FEATURE_SMC_HAS_PARAM */
+
+#if (defined(FSL_FEATURE_SMC_HAS_LLS_SUBMODE) && FSL_FEATURE_SMC_HAS_LLS_SUBMODE) || \
+    (defined(FSL_FEATURE_SMC_HAS_LPOPO) && FSL_FEATURE_SMC_HAS_LPOPO)
+/*!
+ * @brief SMC Low-Leakage Stop power mode config
+ */
+typedef struct _smc_power_mode_lls_config
+{
+#if (defined(FSL_FEATURE_SMC_HAS_LLS_SUBMODE) && FSL_FEATURE_SMC_HAS_LLS_SUBMODE)
+    smc_stop_submode_t subMode; /*!< Low-leakage Stop sub-mode */
+#endif
+#if (defined(FSL_FEATURE_SMC_HAS_LPOPO) && FSL_FEATURE_SMC_HAS_LPOPO)
+    bool enableLpoClock; /*!< Enable LPO clock in LLS mode */
+#endif
+} smc_power_mode_lls_config_t;
+#endif /* (FSL_FEATURE_SMC_HAS_LLS_SUBMODE || FSL_FEATURE_SMC_HAS_LPOPO) */
+
+#if (defined(FSL_FEATURE_SMC_HAS_VERY_LOW_LEAKAGE_STOP_MODE) && FSL_FEATURE_SMC_HAS_VERY_LOW_LEAKAGE_STOP_MODE)
+/*!
+ * @brief SMC Very Low-Leakage Stop power mode config
+ */
+typedef struct _smc_power_mode_vlls_config
+{
+#if (defined(FSL_FEATURE_SMC_USE_VLLSCTRL_REG) && FSL_FEATURE_SMC_USE_VLLSCTRL_REG) ||     \
+    (defined(FSL_FEATURE_SMC_USE_STOPCTRL_VLLSM) && FSL_FEATURE_SMC_USE_STOPCTRL_VLLSM) || \
+    (defined(FSL_FEATURE_SMC_HAS_LLS_SUBMODE) && FSL_FEATURE_SMC_HAS_LLS_SUBMODE)
+    smc_stop_submode_t subMode; /*!< Very Low-leakage Stop sub-mode */
+#endif
+#if (defined(FSL_FEATURE_SMC_HAS_PORPO) && FSL_FEATURE_SMC_HAS_PORPO)
+    bool enablePorDetectInVlls0; /*!< Enable Power on reset detect in VLLS mode */
+#endif
+#if (defined(FSL_FEATURE_SMC_HAS_RAM2_POWER_OPTION) && FSL_FEATURE_SMC_HAS_RAM2_POWER_OPTION)
+    bool enableRam2InVlls2; /*!< Enable RAM2 power in VLLS2 */
+#endif
+#if (defined(FSL_FEATURE_SMC_HAS_LPOPO) && FSL_FEATURE_SMC_HAS_LPOPO)
+    bool enableLpoClock; /*!< Enable LPO clock in VLLS mode */
+#endif
+} smc_power_mode_vlls_config_t;
+#endif
+
+/*******************************************************************************
+ * API
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus */
+
+/*! @name System mode controller APIs*/
+/*@{*/
+
+#if (defined(FSL_FEATURE_SMC_HAS_VERID) && FSL_FEATURE_SMC_HAS_VERID)
+/*!
+ * @brief Gets the SMC version ID.
+ *
+ * This function gets the SMC version ID, including major version number,
+ * minor version number and feature specification number.
+ *
+ * @param base SMC peripheral base address.
+ * @param versionId     Pointer to version ID structure.
+ */
+static inline void SMC_GetVersionId(SMC_Type *base, smc_version_id_t *versionId)
+{
+    *((uint32_t *)versionId) = base->VERID;
+}
+#endif /* FSL_FEATURE_SMC_HAS_VERID */
+
+#if (defined(FSL_FEATURE_SMC_HAS_PARAM) && FSL_FEATURE_SMC_HAS_PARAM)
+/*!
+ * @brief Gets the SMC parameter.
+ *
+ * This function gets the SMC parameter, including the enabled power mdoes.
+ *
+ * @param base SMC peripheral base address.
+ * @param param         Pointer to SMC param structure.
+ */
+void SMC_GetParam(SMC_Type *base, smc_param_t *param);
+#endif
+
+/*!
+ * @brief Configures all power mode protection settings.
+ *
+ * This function  configures the power mode protection settings for
+ * supported power modes in the specified chip family. The available power modes
+ * are defined in the smc_power_mode_protection_t. This should be done at an early
+ * system level initialization stage. See the reference manual for details.
+ * This register can only write once after the power reset.
+ *
+ * The allowed modes are passed as bit map, for example, to allow LLS and VLLS,
+ * use SMC_SetPowerModeProtection(kSMC_AllowPowerModeVlls | kSMC_AllowPowerModeVlps).
+ * To allow all modes, use SMC_SetPowerModeProtection(kSMC_AllowPowerModeAll).
+ *
+ * @param base SMC peripheral base address.
+ * @param allowedModes Bitmap of the allowed power modes.
+ */
+static inline void SMC_SetPowerModeProtection(SMC_Type *base, uint8_t allowedModes)
+{
+    base->PMPROT = allowedModes;
+}
+
+/*!
+ * @brief Gets the current power mode status.
+ *
+ * This function  returns the current power mode stat. Once application
+ * switches the power mode, it should always check the stat to check whether it
+ * runs into the specified mode or not. An application  should  check
+ * this mode before switching to a different mode. The system  requires that
+ * only certain modes can switch to other specific modes. See the
+ * reference manual for details and the smc_power_state_t for information about
+ * the power stat.
+ *
+ * @param base SMC peripheral base address.
+ * @return Current power mode status.
+ */
+static inline smc_power_state_t SMC_GetPowerModeState(SMC_Type *base)
+{
+    return (smc_power_state_t)base->PMSTAT;
+}
+
+/*!
+ * @brief Configure the system to RUN power mode.
+ *
+ * @param base SMC peripheral base address.
+ * @return SMC configuration error code.
+ */
+status_t SMC_SetPowerModeRun(SMC_Type *base);
+
+#if (defined(FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE) && FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE)
+/*!
+ * @brief Configure the system to HSRUN power mode.
+ *
+ * @param base SMC peripheral base address.
+ * @return SMC configuration error code.
+ */
+status_t SMC_SetPowerModeHsrun(SMC_Type *base);
+#endif /* FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE */
+
+/*!
+ * @brief Configure the system to WAIT power mode.
+ *
+ * @param base SMC peripheral base address.
+ * @return SMC configuration error code.
+ */
+status_t SMC_SetPowerModeWait(SMC_Type *base);
+
+/*!
+ * @brief Configure the system to Stop power mode.
+ *
+ * @param base SMC peripheral base address.
+ * @param  option Partial Stop mode option.
+ * @return SMC configuration error code.
+ */
+status_t SMC_SetPowerModeStop(SMC_Type *base, smc_partial_stop_option_t option);
+
+#if (defined(FSL_FEATURE_SMC_HAS_LPWUI) && FSL_FEATURE_SMC_HAS_LPWUI)
+/*!
+ * @brief Configure the system to VLPR power mode.
+ *
+ * @param base SMC peripheral base address.
+ * @param  wakeupMode Enter Normal Run mode if true, else stay in VLPR mode.
+ * @return SMC configuration error code.
+ */
+status_t SMC_SetPowerModeVlpr(SMC_Type *base, bool wakeupMode);
+#else
+/*!
+ * @brief Configure the system to VLPR power mode.
+ *
+ * @param base SMC peripheral base address.
+ * @return SMC configuration error code.
+ */
+status_t SMC_SetPowerModeVlpr(SMC_Type *base);
+#endif /* FSL_FEATURE_SMC_HAS_LPWUI */
+
+/*!
+ * @brief Configure the system to VLPW power mode.
+ *
+ * @param base SMC peripheral base address.
+ * @return SMC configuration error code.
+ */
+status_t SMC_SetPowerModeVlpw(SMC_Type *base);
+
+/*!
+ * @brief Configure the system to VLPS power mode.
+ *
+ * @param base SMC peripheral base address.
+ * @return SMC configuration error code.
+ */
+status_t SMC_SetPowerModeVlps(SMC_Type *base);
+
+#if (defined(FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE) && FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE)
+#if ((defined(FSL_FEATURE_SMC_HAS_LLS_SUBMODE) && FSL_FEATURE_SMC_HAS_LLS_SUBMODE) || \
+     (defined(FSL_FEATURE_SMC_HAS_LPOPO) && FSL_FEATURE_SMC_HAS_LPOPO))
+/*!
+ * @brief Configure the system to LLS power mode.
+ *
+ * @param base SMC peripheral base address.
+ * @param  config The LLS power mode configuration structure
+ * @return SMC configuration error code.
+ */
+status_t SMC_SetPowerModeLls(SMC_Type *base, const smc_power_mode_lls_config_t *config);
+#else
+/*!
+ * @brief Configure the system to LLS power mode.
+ *
+ * @param base SMC peripheral base address.
+ * @return SMC configuration error code.
+ */
+status_t SMC_SetPowerModeLls(SMC_Type *base);
+#endif
+#endif /* FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE */
+
+#if (defined(FSL_FEATURE_SMC_HAS_VERY_LOW_LEAKAGE_STOP_MODE) && FSL_FEATURE_SMC_HAS_VERY_LOW_LEAKAGE_STOP_MODE)
+/*!
+ * @brief Configure the system to VLLS power mode.
+ *
+ * @param base SMC peripheral base address.
+ * @param  config The VLLS power mode configuration structure.
+ * @return SMC configuration error code.
+ */
+status_t SMC_SetPowerModeVlls(SMC_Type *base, const smc_power_mode_vlls_config_t *config);
+#endif /* FSL_FEATURE_SMC_HAS_VERY_LOW_LEAKAGE_STOP_MODE */
+
+/*@}*/
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus */
+
+/*! @}*/
+
+#endif /* _FSL_SMC_H_ */