Diff: TARGET_KL82Z/TOOLCHAIN_IAR/fsl_qspi.h

Revision:

171:3a7713b1edbc

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_KL82Z/TOOLCHAIN_IAR/fsl_qspi.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,722 @@
+/*
+ * The Clear BSD License
+ * Copyright (c) 2015, Freescale Semiconductor, Inc.
+ * Copyright 2016-2017 NXP
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted (subject to the limitations in the disclaimer below) provided
+ *  that the following conditions are met:
+ *
+ * o Redistributions of source code must retain the above copyright notice, this list
+ *   of conditions and the following disclaimer.
+ *
+ * o Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ *
+ * o Neither the name of the copyright holder nor the names of its
+ *   contributors may be used to endorse or promote products derived from this
+ *   software without specific prior written permission.
+ *
+ * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS LICENSE.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _FSL_QSPI_H_
+#define _FSL_QSPI_H_
+
+#include "fsl_common.h"
+
+/*!
+ * @addtogroup qspi
+ * @{
+ */
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*! @name Driver version */
+/*@{*/
+/*! @brief QSPI driver version 2.0.2. */
+#define FSL_QSPI_DRIVER_VERSION (MAKE_VERSION(2, 0, 2))
+/*@}*/
+
+/*! @brief Macro functions for LUT table */
+#define QSPI_LUT_SEQ(cmd0, pad0, op0, cmd1, pad1, op1)                                                        \
+    (QuadSPI_LUT_INSTR0(cmd0) | QuadSPI_LUT_PAD0(pad0) | QuadSPI_LUT_OPRND0(op0) | QuadSPI_LUT_INSTR1(cmd1) | \
+     QuadSPI_LUT_PAD1(pad1) | QuadSPI_LUT_OPRND1(op1))
+
+/*! @brief Macro for QSPI LUT command */
+#define QSPI_CMD (0x1U)
+#define QSPI_ADDR (0x2U)
+#define QSPI_DUMMY (0x3U)
+#define QSPI_MODE (0x4U)
+#define QSPI_MODE2 (0x5U)
+#define QSPI_MODE4 (0x6U)
+#define QSPI_READ (0x7U)
+#define QSPI_WRITE (0x8U)
+#define QSPI_JMP_ON_CS (0x9U)
+#define QSPI_ADDR_DDR (0xAU)
+#define QSPI_MODE_DDR (0xBU)
+#define QSPI_MODE2_DDR (0xCU)
+#define QSPI_MODE4_DDR (0xDU)
+#define QSPI_READ_DDR (0xEU)
+#define QSPI_WRITE_DDR (0xFU)
+#define QSPI_DATA_LEARN (0x10U)
+#define QSPI_CMD_DDR (0x11U)
+#define QSPI_CADDR (0x12U)
+#define QSPI_CADDR_DDR (0x13U)
+#define QSPI_STOP (0x0U)
+
+/*! @brief Macro for QSPI PAD */
+#define QSPI_PAD_1 (0x0U)
+#define QSPI_PAD_2 (0x1U)
+#define QSPI_PAD_4 (0x2U)
+#define QSPI_PAD_8 (0x3U)
+
+/*! @brief Status structure of QSPI.*/
+enum _status_t
+{
+    kStatus_QSPI_Idle = MAKE_STATUS(kStatusGroup_QSPI, 0),  /*!< QSPI is in idle state  */
+    kStatus_QSPI_Busy = MAKE_STATUS(kStatusGroup_QSPI, 1),  /*!< QSPI is busy */
+    kStatus_QSPI_Error = MAKE_STATUS(kStatusGroup_QSPI, 2), /*!< Error occurred during QSPI transfer */
+};
+
+/*! @brief QSPI read data area, from IP FIFO or AHB buffer.*/
+typedef enum _qspi_read_area
+{
+    kQSPI_ReadAHB = 0x0U, /*!< QSPI read from AHB buffer. */
+    kQSPI_ReadIP          /*!< QSPI read from IP FIFO. */
+} qspi_read_area_t;
+
+/*! @brief QSPI command sequence type */
+typedef enum _qspi_command_seq
+{
+    kQSPI_IPSeq = QuadSPI_SPTRCLR_IPPTRC_MASK,                               /*!< IP command sequence */
+    kQSPI_BufferSeq = QuadSPI_SPTRCLR_BFPTRC_MASK,                           /*!< Buffer command sequence */
+    kQSPI_AllSeq = QuadSPI_SPTRCLR_IPPTRC_MASK | QuadSPI_SPTRCLR_BFPTRC_MASK /* All command sequence */
+} qspi_command_seq_t;
+
+/*! @brief QSPI buffer type */
+typedef enum _qspi_fifo
+{
+    kQSPI_TxFifo = QuadSPI_MCR_CLR_TXF_MASK,                            /*!< QSPI Tx FIFO */
+    kQSPI_RxFifo = QuadSPI_MCR_CLR_RXF_MASK,                            /*!< QSPI Rx FIFO */
+    kQSPI_AllFifo = QuadSPI_MCR_CLR_TXF_MASK | QuadSPI_MCR_CLR_RXF_MASK /*!< QSPI all FIFO, including Tx and Rx */
+} qspi_fifo_t;
+
+/*! @brief QSPI transfer endianess*/
+typedef enum _qspi_endianness
+{
+    kQSPI_64BigEndian = 0x0U, /*!< 64 bits big endian */
+    kQSPI_32LittleEndian,     /*!< 32 bit little endian */
+    kQSPI_32BigEndian,        /*!< 32 bit big endian */
+    kQSPI_64LittleEndian      /*!< 64 bit little endian */
+} qspi_endianness_t;
+
+/*! @brief QSPI error flags */
+enum _qspi_error_flags
+{
+    kQSPI_DataLearningFail = (int)QuadSPI_FR_DLPFF_MASK, /*!< Data learning pattern failure flag */
+    kQSPI_TxBufferFill = QuadSPI_FR_TBFF_MASK,           /*!< Tx buffer fill flag */
+    kQSPI_TxBufferUnderrun = QuadSPI_FR_TBUF_MASK,       /*!< Tx buffer underrun flag */
+    kQSPI_IllegalInstruction = QuadSPI_FR_ILLINE_MASK,   /*!< Illegal instruction error flag */
+    kQSPI_RxBufferOverflow = QuadSPI_FR_RBOF_MASK,       /*!< Rx buffer overflow flag */
+    kQSPI_RxBufferDrain = QuadSPI_FR_RBDF_MASK,          /*!< Rx buffer drain flag */
+    kQSPI_AHBSequenceError = QuadSPI_FR_ABSEF_MASK,      /*!< AHB sequence error flag */
+#if !defined(FSL_FEATURE_QSPI_HAS_NO_AITEF) || (!FSL_FEATURE_QSPI_HAS_NO_AITEF)
+    kQSPI_AHBIllegalTransaction = QuadSPI_FR_AITEF_MASK, /*!< AHB illegal transaction error flag */
+#endif                                                   /* FSL_FEATURE_QSPI_HAS_NO_AITEF */
+#if !defined(FSL_FEATURE_QSPI_HAS_NO_AIBSEF) || (!FSL_FEATURE_QSPI_HAS_NO_AIBSEF)
+    kQSPI_AHBIllegalBurstSize = QuadSPI_FR_AIBSEF_MASK,  /*!< AHB illegal burst error flag */
+#endif                                                  /* FSL_FEATURE_QSPI_HAS_NO_AIBSEF */
+    kQSPI_AHBBufferOverflow = QuadSPI_FR_ABOF_MASK,      /*!< AHB buffer overflow flag */
+#if defined(FSL_FEATURE_QSPI_HAS_IP_COMMAND_USAGE_ERROR) && (FSL_FEATURE_QSPI_HAS_IP_COMMAND_USAGE_ERROR)
+    kQSPI_IPCommandUsageError = QuadSPI_FR_IUEF_MASK,              /*!< IP command usage error flag */
+#endif                                                             /* FSL_FEATURE_QSPI_HAS_IP_COMMAND_USAGE_ERROR */
+    kQSPI_IPCommandTriggerDuringAHBAccess = QuadSPI_FR_IPAEF_MASK, /*!< IP command trigger during AHB access error */
+    kQSPI_IPCommandTriggerDuringIPAccess = QuadSPI_FR_IPIEF_MASK,  /*!< IP command trigger cannot be executed */
+    kQSPI_IPCommandTriggerDuringAHBGrant = QuadSPI_FR_IPGEF_MASK,  /*!< IP command trigger during AHB grant error */
+    kQSPI_IPCommandTransactionFinished = QuadSPI_FR_TFF_MASK,      /*!< IP command transaction finished flag */
+    kQSPI_FlagAll = (int)0x8C83F8D1U                               /*!< All error flag */
+};
+
+/*! @brief QSPI state bit */
+enum _qspi_flags
+{
+    kQSPI_DataLearningSamplePoint = (int)QuadSPI_SR_DLPSMP_MASK, /*!< Data learning sample point */
+    kQSPI_TxBufferFull = QuadSPI_SR_TXFULL_MASK,              /*!< Tx buffer full flag */
+#if !defined(FSL_FEATURE_QSPI_HAS_NO_TXDMA) || (!FSL_FEATURE_QSPI_HAS_NO_TXDMA)
+    kQSPI_TxDMA = QuadSPI_SR_TXDMA_MASK,                      /*!< Tx DMA is requested or running */
+    kQSPI_TxWatermark = QuadSPI_SR_TXWA_MASK,                 /*!< Tx buffer watermark available */
+#endif                                                        /* FSL_FEATURE_QSPI_HAS_NO_TXDMA */
+    kQSPI_TxBufferEnoughData = QuadSPI_SR_TXEDA_MASK,         /*!< Tx buffer enough data available */
+    kQSPI_RxDMA = QuadSPI_SR_RXDMA_MASK,                      /*!< Rx DMA is requesting or running */
+    kQSPI_RxBufferFull = QuadSPI_SR_RXFULL_MASK,              /*!< Rx buffer full */
+    kQSPI_RxWatermark = QuadSPI_SR_RXWE_MASK,                 /*!< Rx buffer watermark exceeded */
+    kQSPI_AHB3BufferFull = QuadSPI_SR_AHB3FUL_MASK,           /*!< AHB buffer 3 full*/
+    kQSPI_AHB2BufferFull = QuadSPI_SR_AHB2FUL_MASK,           /*!< AHB buffer 2 full */
+    kQSPI_AHB1BufferFull = QuadSPI_SR_AHB1FUL_MASK,           /*!< AHB buffer 1 full */
+    kQSPI_AHB0BufferFull = QuadSPI_SR_AHB0FUL_MASK,           /*!< AHB buffer 0 full */
+    kQSPI_AHB3BufferNotEmpty = QuadSPI_SR_AHB3NE_MASK,        /*!< AHB buffer 3 not empty */
+    kQSPI_AHB2BufferNotEmpty = QuadSPI_SR_AHB2NE_MASK,        /*!< AHB buffer 2 not empty */
+    kQSPI_AHB1BufferNotEmpty = QuadSPI_SR_AHB1NE_MASK,        /*!< AHB buffer 1 not empty */
+    kQSPI_AHB0BufferNotEmpty = QuadSPI_SR_AHB0NE_MASK,        /*!< AHB buffer 0 not empty */
+    kQSPI_AHBTransactionPending = QuadSPI_SR_AHBTRN_MASK,     /*!< AHB access transaction pending */
+    kQSPI_AHBCommandPriorityGranted = QuadSPI_SR_AHBGNT_MASK, /*!< AHB command priority granted */
+    kQSPI_AHBAccess = QuadSPI_SR_AHB_ACC_MASK,                /*!< AHB access */
+    kQSPI_IPAccess = QuadSPI_SR_IP_ACC_MASK,                  /*!< IP access */
+    kQSPI_Busy = QuadSPI_SR_BUSY_MASK,                        /*!< Module busy */
+    kQSPI_StateAll = (int)0xEF897FE7U                         /*!< All flags */
+};
+
+/*! @brief QSPI interrupt enable */
+enum _qspi_interrupt_enable
+{
+    kQSPI_DataLearningFailInterruptEnable =
+        (int)QuadSPI_RSER_DLPFIE_MASK,                           /*!< Data learning pattern failure interrupt enable */
+    kQSPI_TxBufferFillInterruptEnable = QuadSPI_RSER_TBFIE_MASK, /*!< Tx buffer fill interrupt enable */
+    kQSPI_TxBufferUnderrunInterruptEnable = QuadSPI_RSER_TBUIE_MASK, /*!< Tx buffer underrun interrupt enable */
+    kQSPI_IllegalInstructionInterruptEnable =
+        QuadSPI_RSER_ILLINIE_MASK,                                    /*!< Illegal instruction error interrupt enable */
+    kQSPI_RxBufferOverflowInterruptEnable = QuadSPI_RSER_RBOIE_MASK,  /*!< Rx buffer overflow interrupt enable */
+    kQSPI_RxBufferDrainInterruptEnable = QuadSPI_RSER_RBDIE_MASK,     /*!< Rx buffer drain interrupt enable */
+    kQSPI_AHBSequenceErrorInterruptEnable = QuadSPI_RSER_ABSEIE_MASK, /*!< AHB sequence error interrupt enable */
+#if !defined(FSL_FEATURE_QSPI_HAS_NO_AITEF) || (!FSL_FEATURE_QSPI_HAS_NO_AITEF)
+    kQSPI_AHBIllegalTransactionInterruptEnable =
+        QuadSPI_RSER_AITIE_MASK, /*!< AHB illegal transaction error interrupt enable */
+#endif                           /* FSL_FEATURE_QSPI_HAS_NO_AITEF */
+#if !defined(FSL_FEATURE_QSPI_HAS_NO_AIBSEF) || (!FSL_FEATURE_QSPI_HAS_NO_AIBSEF)
+    kQSPI_AHBIllegalBurstSizeInterruptEnable =
+        QuadSPI_RSER_AIBSIE_MASK,                                     /*!< AHB illegal burst error interrupt enable */
+#endif                                                                /* FSL_FEATURE_QSPI_HAS_NO_AIBSEF */
+    kQSPI_AHBBufferOverflowInterruptEnable = QuadSPI_RSER_ABOIE_MASK, /*!< AHB buffer overflow interrupt enable */
+#if defined(FSL_FEATURE_QSPI_HAS_IP_COMMAND_USAGE_ERROR) && (FSL_FEATURE_QSPI_HAS_IP_COMMAND_USAGE_ERROR)
+    kQSPI_IPCommandUsageErrorInterruptEnable = QuadSPI_RSER_IUEIE_MASK, /*!< IP command usage error interrupt enable */
+#endif /* FSL_FEATURE_QSPI_HAS_IP_COMMAND_USAGE_ERROR */
+    kQSPI_IPCommandTriggerDuringAHBAccessInterruptEnable =
+        QuadSPI_RSER_IPAEIE_MASK, /*!< IP command trigger during AHB access error */
+    kQSPI_IPCommandTriggerDuringIPAccessInterruptEnable =
+        QuadSPI_RSER_IPIEIE_MASK, /*!< IP command trigger cannot be executed */
+    kQSPI_IPCommandTriggerDuringAHBGrantInterruptEnable =
+        QuadSPI_RSER_IPGEIE_MASK, /*!< IP command trigger during AHB grant error */
+    kQSPI_IPCommandTransactionFinishedInterruptEnable =
+        QuadSPI_RSER_TFIE_MASK,            /*!< IP command transaction finished interrupt enable */
+    kQSPI_AllInterruptEnable = (int)0x8C83F8D1U /*!< All error interrupt enable */
+};
+
+/*! @brief QSPI DMA request flag */
+enum _qspi_dma_enable
+{
+#if !defined(FSL_FEATURE_QSPI_HAS_NO_TXDMA) || (!FSL_FEATURE_QSPI_HAS_NO_TXDMA)
+    kQSPI_TxBufferFillDMAEnable = QuadSPI_RSER_TBFDE_MASK,                  /*!< Tx buffer fill DMA */
+#endif                                                      /* FSL_FEATURE_QSPI_HAS_NO_TXDMA */
+    kQSPI_RxBufferDrainDMAEnable = QuadSPI_RSER_RBDDE_MASK,                 /*!< Rx buffer drain DMA */
+#if !defined(FSL_FEATURE_QSPI_HAS_NO_TXDMA) || (!FSL_FEATURE_QSPI_HAS_NO_TXDMA)
+    kQSPI_AllDDMAEnable = QuadSPI_RSER_TBFDE_MASK | QuadSPI_RSER_RBDDE_MASK /*!< All DMA source */
+#else
+    kQSPI_AllDDMAEnable = QuadSPI_RSER_RBDDE_MASK /* All DMA source */
+#endif /* FSL_FEATURE_QSPI_HAS_NO_TXDMA */
+};
+
+/*! @brief Phrase shift number for DQS mode. */
+typedef enum _qspi_dqs_phrase_shift
+{
+    kQSPI_DQSNoPhraseShift = 0x0U, /*!< No phase shift */
+    kQSPI_DQSPhraseShift45Degree,  /*!< Select 45 degree phase shift*/
+    kQSPI_DQSPhraseShift90Degree,  /*!< Select 90 degree phase shift */
+    kQSPI_DQSPhraseShift135Degree  /*!< Select 135 degree phase shift */
+} qspi_dqs_phrase_shift_t;
+
+/*! @brief DQS configure features*/
+typedef struct QspiDQSConfig
+{
+    uint32_t portADelayTapNum;     /*!< Delay chain tap number selection for QSPI port A DQS */
+    uint32_t portBDelayTapNum;     /*!< Delay chain tap number selection for QSPI port B DQS*/
+    qspi_dqs_phrase_shift_t shift; /*!< Phase shift for internal DQS generation */
+    bool enableDQSClkInverse;      /*!< Enable inverse clock for internal DQS generation */
+    bool enableDQSPadLoopback;     /*!< Enable DQS loop back from DQS pad */
+    bool enableDQSLoopback;        /*!< Enable DQS loop back */
+} qspi_dqs_config_t;
+
+/*! @brief Flash timing configuration. */
+typedef struct QspiFlashTiming
+{
+    uint32_t dataHoldTime; /*!< Serial flash data in hold time */
+    uint32_t CSHoldTime;   /*!< Serial flash CS hold time in terms of serial flash clock cycles */
+    uint32_t CSSetupTime;  /*!< Serial flash CS setup time in terms of serial flash clock cycles */
+} qspi_flash_timing_t;
+
+/*! @brief QSPI configuration structure*/
+typedef struct QspiConfig
+{
+    uint32_t clockSource;                                       /*!< Clock source for QSPI module */
+    uint32_t baudRate;                                          /*!< Serial flash clock baud rate */
+    uint8_t txWatermark;                                        /*!< QSPI transmit watermark value */
+    uint8_t rxWatermark;                                        /*!< QSPI receive watermark value. */
+    uint32_t AHBbufferSize[FSL_FEATURE_QSPI_AHB_BUFFER_COUNT];  /*!< AHB buffer size. */
+    uint8_t AHBbufferMaster[FSL_FEATURE_QSPI_AHB_BUFFER_COUNT]; /*!< AHB buffer master.  */
+    bool enableAHBbuffer3AllMaster;                             /*!< Is AHB buffer3 for all master.*/
+    qspi_read_area_t area;                                      /*!< Which area Rx data readout */
+    bool enableQspi;                                            /*!< Enable QSPI after initialization */
+} qspi_config_t;
+
+/*! @brief External flash configuration items*/
+typedef struct _qspi_flash_config
+{
+    uint32_t flashA1Size; /*!< Flash A1 size */
+    uint32_t flashA2Size; /*!< Flash A2 size */
+#if defined(FSL_FEATURE_QSPI_SUPPORT_PARALLEL_MODE) && (FSL_FEATURE_QSPI_SUPPORT_PARALLEL_MODE)
+    uint32_t flashB1Size;                             /*!< Flash B1 size */
+    uint32_t flashB2Size;                             /*!< Flash B2 size */
+#endif                                                /* FSL_FEATURE_QSPI_SUPPORT_PARALLEL_MODE */
+    uint32_t lookuptable[FSL_FEATURE_QSPI_LUT_DEPTH]; /*!< Flash command in LUT */
+#if !defined(FSL_FEATURE_QSPI_HAS_NO_TDH) || (!FSL_FEATURE_QSPI_HAS_NO_TDH)
+    uint32_t dataHoldTime;                            /*!< Data line hold time. */
+#endif                        /* FSL_FEATURE_QSPI_HAS_NO_TDH */
+    uint32_t CSHoldTime;                              /*!< CS line hold time */
+    uint32_t CSSetupTime;                             /*!< CS line setup time*/
+    uint32_t cloumnspace;                             /*!< Column space size */
+    uint32_t dataLearnValue;                          /*!< Data Learn value if enable data learn */
+    qspi_endianness_t endian;                         /*!< Flash data endianess. */
+    bool enableWordAddress;                           /*!< If enable word address.*/
+} qspi_flash_config_t;
+
+/*! @brief Transfer structure for QSPI */
+typedef struct _qspi_transfer
+{
+    uint32_t *data;  /*!< Pointer to data to transmit */
+    size_t dataSize; /*!< Bytes to be transmit */
+} qspi_transfer_t;
+
+/******************************************************************************
+ * API
+ *****************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*!
+ * @name Initialization and deinitialization
+ * @{
+ */
+
+/*!
+* @brief Get the instance number for QSPI.
+*
+* @param base QSPI base pointer.
+*/
+uint32_t QSPI_GetInstance(QuadSPI_Type *base);
+
+/*!
+ * @brief Initializes the QSPI module and internal state.
+ *
+ * This function enables the clock for QSPI and also configures the QSPI with the
+ * input configure parameters. Users should call this function before any QSPI operations.
+ *
+ * @param base Pointer to QuadSPI Type.
+ * @param config QSPI configure structure.
+ * @param srcClock_Hz QSPI source clock frequency in Hz.
+ */
+void QSPI_Init(QuadSPI_Type *base, qspi_config_t *config, uint32_t srcClock_Hz);
+
+/*!
+ * @brief Gets default settings for QSPI.
+ *
+ * @param config QSPI configuration structure.
+ */
+void QSPI_GetDefaultQspiConfig(qspi_config_t *config);
+
+/*!
+ * @brief Deinitializes the QSPI module.
+ *
+ * Clears the QSPI state and  QSPI module registers.
+ * @param base Pointer to QuadSPI Type.
+ */
+void QSPI_Deinit(QuadSPI_Type *base);
+
+/*!
+ * @brief Configures the serial flash parameter.
+ *
+ * This function configures the serial flash relevant parameters, such as the size, command, and so on.
+ * The flash configuration value cannot have a default value. The user needs to configure it according to the
+ * QSPI features.
+ *
+ * @param base Pointer to QuadSPI Type.
+ * @param config Flash configuration parameters.
+ */
+void QSPI_SetFlashConfig(QuadSPI_Type *base, qspi_flash_config_t *config);
+
+/*!
+ * @brief Software reset for the QSPI logic.
+ *
+ * This function sets the software reset flags for both AHB and buffer domain and
+ * resets both AHB buffer and also IP FIFOs.
+ *
+ * @param base Pointer to QuadSPI Type.
+ */
+void QSPI_SoftwareReset(QuadSPI_Type *base);
+
+/*!
+ * @brief Enables or disables the QSPI module.
+ *
+ * @param base Pointer to QuadSPI Type.
+ * @param enable True means enable QSPI, false means disable.
+ */
+static inline void QSPI_Enable(QuadSPI_Type *base, bool enable)
+{
+    if (enable)
+    {
+        base->MCR &= ~QuadSPI_MCR_MDIS_MASK;
+    }
+    else
+    {
+        base->MCR |= QuadSPI_MCR_MDIS_MASK;
+    }
+}
+
+/*! @} */
+
+/*!
+ * @name Status
+ * @{
+ */
+
+/*!
+ * @brief Gets the state value of QSPI.
+ *
+ * @param base Pointer to QuadSPI Type.
+ * @return status flag, use status flag to AND #_qspi_flags could get the related status.
+ */
+static inline uint32_t QSPI_GetStatusFlags(QuadSPI_Type *base)
+{
+    return base->SR;
+}
+
+/*!
+ * @brief Gets QSPI error status flags.
+ *
+ * @param base Pointer to QuadSPI Type.
+ * @return status flag, use status flag to AND #_qspi_error_flags could get the related status.
+ */
+static inline uint32_t QSPI_GetErrorStatusFlags(QuadSPI_Type *base)
+{
+    return base->FR;
+}
+
+/*! @brief Clears the QSPI error flags.
+ *
+ * @param base Pointer to QuadSPI Type.
+ * @param mask Which kind of QSPI flags to be cleared, a combination of _qspi_error_flags.
+ */
+static inline void QSPI_ClearErrorFlag(QuadSPI_Type *base, uint32_t mask)
+{
+    base->FR = mask;
+}
+
+/*! @} */
+
+/*!
+ * @name Interrupts
+ * @{
+ */
+
+/*!
+ * @brief Enables the QSPI interrupts.
+ *
+ * @param base Pointer to QuadSPI Type.
+ * @param mask QSPI interrupt source.
+ */
+static inline void QSPI_EnableInterrupts(QuadSPI_Type *base, uint32_t mask)
+{
+    base->RSER |= mask;
+}
+
+/*!
+ * @brief Disables the QSPI interrupts.
+ *
+ * @param base Pointer to QuadSPI Type.
+ * @param mask QSPI interrupt source.
+ */
+static inline void QSPI_DisableInterrupts(QuadSPI_Type *base, uint32_t mask)
+{
+    base->RSER &= ~mask;
+}
+
+/*! @} */
+
+/*!
+ * @name DMA Control
+ * @{
+ */
+
+/*!
+ * @brief Enables the QSPI DMA source.
+ *
+ * @param base Pointer to QuadSPI Type.
+ * @param mask QSPI DMA source.
+ * @param enable True means enable DMA, false means disable.
+ */
+static inline void QSPI_EnableDMA(QuadSPI_Type *base, uint32_t mask, bool enable)
+{
+    if (enable)
+    {
+        base->RSER |= mask;
+    }
+    else
+    {
+        base->RSER &= ~mask;
+    }
+}
+
+/*!
+ * @brief Gets the Tx data register address. It is used for DMA operation.
+ *
+ * @param base Pointer to QuadSPI Type.
+ * @return QSPI Tx data register address.
+ */
+static inline uint32_t QSPI_GetTxDataRegisterAddress(QuadSPI_Type *base)
+{
+    return (uint32_t)(&base->TBDR);
+}
+
+/*!
+ * @brief Gets the Rx data register address used for DMA operation.
+ *
+ * This function returns the Rx data register address or Rx buffer address
+ * according to the Rx read area settings.
+ *
+ * @param base Pointer to QuadSPI Type.
+ * @return QSPI Rx data register address.
+ */
+uint32_t QSPI_GetRxDataRegisterAddress(QuadSPI_Type *base);
+
+/* @} */
+
+/*!
+ * @name Bus Operations
+ * @{
+ */
+
+/*! @brief Sets the IP command address.
+ *
+ * @param base Pointer to QuadSPI Type.
+ * @param addr IP command address.
+ */
+static inline void QSPI_SetIPCommandAddress(QuadSPI_Type *base, uint32_t addr)
+{
+    base->SFAR = addr;
+}
+
+/*! @brief Sets the IP command size.
+ *
+ * @param base Pointer to QuadSPI Type.
+ * @param size IP command size.
+ */
+static inline void QSPI_SetIPCommandSize(QuadSPI_Type *base, uint16_t size)
+{
+    base->IPCR_ACCESSBIT.IDATZ = size;
+}
+
+/*! @brief Executes IP commands located in LUT table.
+ *
+ * @param base Pointer to QuadSPI Type.
+ * @param index IP command located in which LUT table index.
+ */
+void QSPI_ExecuteIPCommand(QuadSPI_Type *base, uint32_t index);
+
+/*! @brief Executes AHB commands located in LUT table.
+ *
+ * @param base Pointer to QuadSPI Type.
+ * @param index AHB command located in which LUT table index.
+ */
+void QSPI_ExecuteAHBCommand(QuadSPI_Type *base, uint32_t index);
+
+#if defined(FSL_FEATURE_QSPI_SUPPORT_PARALLEL_MODE) && (FSL_FEATURE_QSPI_SUPPORT_PARALLEL_MODE)
+/*! @brief Enables/disables the QSPI IP command parallel mode.
+ *
+ * @param base Pointer to QuadSPI Type.
+ * @param enable True means enable parallel mode, false means disable parallel mode.
+ */
+static inline void QSPI_EnableIPParallelMode(QuadSPI_Type *base, bool enable)
+{
+    if (enable)
+    {
+        base->IPCR |= QuadSPI_IPCR_PAR_EN_MASK;
+    }
+    else
+    {
+        base->IPCR &= ~QuadSPI_IPCR_PAR_EN_MASK;
+    }
+}
+
+/*! @brief Enables/disables the QSPI AHB command parallel mode.
+ *
+ * @param base Pointer to QuadSPI Type.
+ * @param enable True means enable parallel mode, false means disable parallel mode.
+ */
+static inline void QSPI_EnableAHBParallelMode(QuadSPI_Type *base, bool enable)
+{
+    if (enable)
+    {
+        base->BFGENCR |= QuadSPI_BFGENCR_PAR_EN_MASK;
+    }
+    else
+    {
+        base->BFGENCR &= ~QuadSPI_BFGENCR_PAR_EN_MASK;
+    }
+}
+#endif /* FSL_FEATURE_QSPI_SUPPORT_PARALLEL_MODE */
+
+/*! @brief Updates the LUT table.
+*
+* @param base Pointer to QuadSPI Type.
+* @param index Which LUT index needs to be located. It should be an integer divided by 4.
+* @param cmd Command sequence array.
+*/
+void QSPI_UpdateLUT(QuadSPI_Type *base, uint32_t index, uint32_t *cmd);
+
+/*! @brief Clears the QSPI FIFO logic.
+ *
+ * @param base Pointer to QuadSPI Type.
+ * @param mask Which kind of QSPI FIFO to be cleared.
+ */
+static inline void QSPI_ClearFifo(QuadSPI_Type *base, uint32_t mask)
+{
+    base->MCR |= mask;
+}
+
+/*!@ brief Clears the command sequence for the IP/buffer command.
+ *
+ * This function can reset the command sequence.
+ * @param base QSPI base address.
+ * @param seq Which command sequence need to reset, IP command, buffer command or both.
+ */
+static inline void QSPI_ClearCommandSequence(QuadSPI_Type *base, qspi_command_seq_t seq)
+{
+    base->SPTRCLR = seq;
+}
+
+/*!
+ * @brief Enable or disable DDR mode.
+ *
+ * @param base QSPI base pointer
+ * @param eanble True means enable DDR mode, false means disable DDR mode.
+ */
+static inline void QSPI_EnableDDRMode(QuadSPI_Type *base, bool enable)
+{
+    if (enable)
+    {
+        base->MCR |= QuadSPI_MCR_DDR_EN_MASK;
+    }
+    else
+    {
+        base->MCR &= ~QuadSPI_MCR_DDR_EN_MASK;
+    }
+}
+
+/*!@ brief Set the RX buffer readout area.
+ *
+ * This function can set the RX buffer readout, from AHB bus or IP Bus.
+ * @param base QSPI base address.
+ * @param area QSPI Rx buffer readout area. AHB bus buffer or IP bus buffer.
+ */
+void QSPI_SetReadDataArea(QuadSPI_Type *base, qspi_read_area_t area);
+
+/*!
+ * @brief Sends a buffer of data bytes using a  blocking method.
+ * @note This function blocks via polling until all bytes have been sent.
+ * @param base QSPI base pointer
+ * @param buffer The data bytes to send
+ * @param size The number of data bytes to send
+ */
+void QSPI_WriteBlocking(QuadSPI_Type *base, uint32_t *buffer, size_t size);
+
+/*!
+ * @brief Writes data into FIFO.
+ *
+ * @param base QSPI base pointer
+ * @param data The data bytes to send
+ */
+static inline void QSPI_WriteData(QuadSPI_Type *base, uint32_t data)
+{
+    base->TBDR = data;
+}
+
+/*!
+ * @brief Receives a buffer of data bytes using a blocking method.
+ * @note This function blocks via polling until all bytes have been sent. Users shall notice that
+ * this receive size shall not bigger than 64 bytes. As this interface is used to read flash status registers.
+ * For flash contents read, please use AHB bus read, this is much more efficiency.
+ *
+ * @param base QSPI base pointer
+ * @param buffer The data bytes to send
+ * @param size The number of data bytes to receive
+ */
+void QSPI_ReadBlocking(QuadSPI_Type *base, uint32_t *buffer, size_t size);
+
+/*!
+ * @brief Receives data from data FIFO.
+ *
+ * @param base QSPI base pointer
+ * @return The data in the FIFO.
+ */
+uint32_t QSPI_ReadData(QuadSPI_Type *base);
+
+/*! @} */
+
+/*!
+ * @name Transactional
+ * @{
+ */
+
+/*!
+ * @brief Writes data to the QSPI transmit buffer.
+ *
+ * This function writes a continuous data to the QSPI transmit FIFO. This function is a block function
+ * and can return only when finished. This function uses polling methods.
+ *
+ * @param base Pointer to QuadSPI Type.
+ * @param xfer QSPI transfer structure.
+ */
+static inline void QSPI_TransferSendBlocking(QuadSPI_Type *base, qspi_transfer_t *xfer)
+{
+    QSPI_WriteBlocking(base, xfer->data, xfer->dataSize);
+}
+
+/*!
+ * @brief Reads data from the QSPI receive buffer in polling way.
+ *
+ * This function reads continuous data from the QSPI receive buffer/FIFO. This function is a blocking
+ * function and can return only when finished. This function uses polling methods. Users shall notice that
+ * this receive size shall not bigger than 64 bytes. As this interface is used to read flash status registers.
+ * For flash contents read, please use AHB bus read, this is much more efficiency.
+ *
+ * @param base Pointer to QuadSPI Type.
+ * @param xfer QSPI transfer structure.
+ */
+static inline void QSPI_TransferReceiveBlocking(QuadSPI_Type *base, qspi_transfer_t *xfer)
+{
+    QSPI_ReadBlocking(base, xfer->data, xfer->dataSize);
+}
+
+/*! @} */
+
+#if defined(__cplusplus)
+}
+#endif
+
+/* @}*/
+
+#endif /* _FSL_QSPI_H_*/