mbed official
The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
Diff: TARGET_KL82Z/TOOLCHAIN_IAR/fsl_dspi.h
- Revision:
- 171:3a7713b1edbc
- Parent:
- 145:64910690c574
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_KL82Z/TOOLCHAIN_IAR/fsl_dspi.h Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,1181 @@
+/*
+ * Copyright (c) 2015, Freescale Semiconductor, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * o Redistributions of source code must retain the above copyright notice, this list
+ * of conditions and the following disclaimer.
+ *
+ * o Redistributions in binary form must reproduce the above copyright notice, this
+ * list of conditions and the following disclaimer in the documentation and/or
+ * other materials provided with the distribution.
+ *
+ * o Neither the name of Freescale Semiconductor, Inc. nor the names of its
+ * contributors may be used to endorse or promote products derived from this
+ * software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _FSL_DSPI_H_
+#define _FSL_DSPI_H_
+
+#include "fsl_common.h"
+
+/*!
+ * @addtogroup dspi_driver
+ * @{
+ */
+
+
+/**********************************************************************************************************************
+ * Definitions
+ *********************************************************************************************************************/
+
+/*! @name Driver version */
+/*@{*/
+/*! @brief DSPI driver version 2.1.1. */
+#define FSL_DSPI_DRIVER_VERSION (MAKE_VERSION(2, 1, 1))
+/*@}*/
+
+/*! @brief DSPI dummy data if no Tx data.*/
+#define DSPI_DUMMY_DATA (0x00U) /*!< Dummy data used for tx if there is not txData. */
+
+/*! @brief Status for the DSPI driver.*/
+enum _dspi_status
+{
+ kStatus_DSPI_Busy = MAKE_STATUS(kStatusGroup_DSPI, 0), /*!< DSPI transfer is busy.*/
+ kStatus_DSPI_Error = MAKE_STATUS(kStatusGroup_DSPI, 1), /*!< DSPI driver error. */
+ kStatus_DSPI_Idle = MAKE_STATUS(kStatusGroup_DSPI, 2), /*!< DSPI is idle.*/
+ kStatus_DSPI_OutOfRange = MAKE_STATUS(kStatusGroup_DSPI, 3) /*!< DSPI transfer out Of range. */
+};
+
+/*! @brief DSPI status flags in SPIx_SR register.*/
+enum _dspi_flags
+{
+ kDSPI_TxCompleteFlag = SPI_SR_TCF_MASK, /*!< Transfer Complete Flag. */
+ kDSPI_EndOfQueueFlag = SPI_SR_EOQF_MASK, /*!< End of Queue Flag.*/
+ kDSPI_TxFifoUnderflowFlag = SPI_SR_TFUF_MASK, /*!< Transmit FIFO Underflow Flag.*/
+ kDSPI_TxFifoFillRequestFlag = SPI_SR_TFFF_MASK, /*!< Transmit FIFO Fill Flag.*/
+ kDSPI_RxFifoOverflowFlag = SPI_SR_RFOF_MASK, /*!< Receive FIFO Overflow Flag.*/
+ kDSPI_RxFifoDrainRequestFlag = SPI_SR_RFDF_MASK, /*!< Receive FIFO Drain Flag.*/
+ kDSPI_TxAndRxStatusFlag = SPI_SR_TXRXS_MASK, /*!< The module is in Stopped/Running state.*/
+ kDSPI_AllStatusFlag = SPI_SR_TCF_MASK | SPI_SR_EOQF_MASK | SPI_SR_TFUF_MASK | SPI_SR_TFFF_MASK | SPI_SR_RFOF_MASK |
+ SPI_SR_RFDF_MASK | SPI_SR_TXRXS_MASK /*!< All status above.*/
+};
+
+/*! @brief DSPI interrupt source.*/
+enum _dspi_interrupt_enable
+{
+ kDSPI_TxCompleteInterruptEnable = SPI_RSER_TCF_RE_MASK, /*!< TCF interrupt enable.*/
+ kDSPI_EndOfQueueInterruptEnable = SPI_RSER_EOQF_RE_MASK, /*!< EOQF interrupt enable.*/
+ kDSPI_TxFifoUnderflowInterruptEnable = SPI_RSER_TFUF_RE_MASK, /*!< TFUF interrupt enable.*/
+ kDSPI_TxFifoFillRequestInterruptEnable = SPI_RSER_TFFF_RE_MASK, /*!< TFFF interrupt enable, DMA disable.*/
+ kDSPI_RxFifoOverflowInterruptEnable = SPI_RSER_RFOF_RE_MASK, /*!< RFOF interrupt enable.*/
+ kDSPI_RxFifoDrainRequestInterruptEnable = SPI_RSER_RFDF_RE_MASK, /*!< RFDF interrupt enable, DMA disable.*/
+ kDSPI_AllInterruptEnable = SPI_RSER_TCF_RE_MASK | SPI_RSER_EOQF_RE_MASK | SPI_RSER_TFUF_RE_MASK |
+ SPI_RSER_TFFF_RE_MASK | SPI_RSER_RFOF_RE_MASK | SPI_RSER_RFDF_RE_MASK
+ /*!< All above interrupts enable.*/
+};
+
+/*! @brief DSPI DMA source.*/
+enum _dspi_dma_enable
+{
+ kDSPI_TxDmaEnable = (SPI_RSER_TFFF_RE_MASK | SPI_RSER_TFFF_DIRS_MASK), /*!< TFFF flag generates DMA requests.
+ No Tx interrupt request. */
+ kDSPI_RxDmaEnable = (SPI_RSER_RFDF_RE_MASK | SPI_RSER_RFDF_DIRS_MASK) /*!< RFDF flag generates DMA requests.
+ No Rx interrupt request. */
+};
+
+/*! @brief DSPI master or slave mode configuration.*/
+typedef enum _dspi_master_slave_mode
+{
+ kDSPI_Master = 1U, /*!< DSPI peripheral operates in master mode.*/
+ kDSPI_Slave = 0U /*!< DSPI peripheral operates in slave mode.*/
+} dspi_master_slave_mode_t;
+
+/*!
+ * @brief DSPI Sample Point: Controls when the DSPI master samples SIN in Modified Transfer Format. This field is valid
+ * only when CPHA bit in CTAR register is 0.
+ */
+typedef enum _dspi_master_sample_point
+{
+ kDSPI_SckToSin0Clock = 0U, /*!< 0 system clocks between SCK edge and SIN sample.*/
+ kDSPI_SckToSin1Clock = 1U, /*!< 1 system clock between SCK edge and SIN sample.*/
+ kDSPI_SckToSin2Clock = 2U /*!< 2 system clocks between SCK edge and SIN sample.*/
+} dspi_master_sample_point_t;
+
+/*! @brief DSPI Peripheral Chip Select (Pcs) configuration (which Pcs to configure).*/
+typedef enum _dspi_which_pcs_config
+{
+ kDSPI_Pcs0 = 1U << 0, /*!< Pcs[0] */
+ kDSPI_Pcs1 = 1U << 1, /*!< Pcs[1] */
+ kDSPI_Pcs2 = 1U << 2, /*!< Pcs[2] */
+ kDSPI_Pcs3 = 1U << 3, /*!< Pcs[3] */
+ kDSPI_Pcs4 = 1U << 4, /*!< Pcs[4] */
+ kDSPI_Pcs5 = 1U << 5 /*!< Pcs[5] */
+} dspi_which_pcs_t;
+
+/*! @brief DSPI Peripheral Chip Select (Pcs) Polarity configuration.*/
+typedef enum _dspi_pcs_polarity_config
+{
+ kDSPI_PcsActiveHigh = 0U, /*!< Pcs Active High (idles low). */
+ kDSPI_PcsActiveLow = 1U /*!< Pcs Active Low (idles high). */
+} dspi_pcs_polarity_config_t;
+
+/*! @brief DSPI Peripheral Chip Select (Pcs) Polarity.*/
+enum _dspi_pcs_polarity
+{
+ kDSPI_Pcs0ActiveLow = 1U << 0, /*!< Pcs0 Active Low (idles high). */
+ kDSPI_Pcs1ActiveLow = 1U << 1, /*!< Pcs1 Active Low (idles high). */
+ kDSPI_Pcs2ActiveLow = 1U << 2, /*!< Pcs2 Active Low (idles high). */
+ kDSPI_Pcs3ActiveLow = 1U << 3, /*!< Pcs3 Active Low (idles high). */
+ kDSPI_Pcs4ActiveLow = 1U << 4, /*!< Pcs4 Active Low (idles high). */
+ kDSPI_Pcs5ActiveLow = 1U << 5, /*!< Pcs5 Active Low (idles high). */
+ kDSPI_PcsAllActiveLow = 0xFFU /*!< Pcs0 to Pcs5 Active Low (idles high). */
+};
+
+/*! @brief DSPI clock polarity configuration for a given CTAR.*/
+typedef enum _dspi_clock_polarity
+{
+ kDSPI_ClockPolarityActiveHigh = 0U, /*!< CPOL=0. Active-high DSPI clock (idles low).*/
+ kDSPI_ClockPolarityActiveLow = 1U /*!< CPOL=1. Active-low DSPI clock (idles high).*/
+} dspi_clock_polarity_t;
+
+/*! @brief DSPI clock phase configuration for a given CTAR.*/
+typedef enum _dspi_clock_phase
+{
+ kDSPI_ClockPhaseFirstEdge = 0U, /*!< CPHA=0. Data is captured on the leading edge of the SCK and changed on the
+ following edge.*/
+ kDSPI_ClockPhaseSecondEdge = 1U /*!< CPHA=1. Data is changed on the leading edge of the SCK and captured on the
+ following edge.*/
+} dspi_clock_phase_t;
+
+/*! @brief DSPI data shifter direction options for a given CTAR.*/
+typedef enum _dspi_shift_direction
+{
+ kDSPI_MsbFirst = 0U, /*!< Data transfers start with most significant bit.*/
+ kDSPI_LsbFirst = 1U /*!< Data transfers start with least significant bit.*/
+} dspi_shift_direction_t;
+
+/*! @brief DSPI delay type selection.*/
+typedef enum _dspi_delay_type
+{
+ kDSPI_PcsToSck = 1U, /*!< Pcs-to-SCK delay. */
+ kDSPI_LastSckToPcs, /*!< Last SCK edge to Pcs delay. */
+ kDSPI_BetweenTransfer /*!< Delay between transfers. */
+} dspi_delay_type_t;
+
+/*! @brief DSPI Clock and Transfer Attributes Register (CTAR) selection.*/
+typedef enum _dspi_ctar_selection
+{
+ kDSPI_Ctar0 = 0U, /*!< CTAR0 selection option for master or slave mode, note that CTAR0 and CTAR0_SLAVE are the
+ same register address. */
+ kDSPI_Ctar1 = 1U, /*!< CTAR1 selection option for master mode only. */
+ kDSPI_Ctar2 = 2U, /*!< CTAR2 selection option for master mode only , note that some device do not support CTAR2. */
+ kDSPI_Ctar3 = 3U, /*!< CTAR3 selection option for master mode only , note that some device do not support CTAR3. */
+ kDSPI_Ctar4 = 4U, /*!< CTAR4 selection option for master mode only , note that some device do not support CTAR4. */
+ kDSPI_Ctar5 = 5U, /*!< CTAR5 selection option for master mode only , note that some device do not support CTAR5. */
+ kDSPI_Ctar6 = 6U, /*!< CTAR6 selection option for master mode only , note that some device do not support CTAR6. */
+ kDSPI_Ctar7 = 7U /*!< CTAR7 selection option for master mode only , note that some device do not support CTAR7. */
+} dspi_ctar_selection_t;
+
+#define DSPI_MASTER_CTAR_SHIFT (0U) /*!< DSPI master CTAR shift macro , internal used. */
+#define DSPI_MASTER_CTAR_MASK (0x0FU) /*!< DSPI master CTAR mask macro , internal used. */
+#define DSPI_MASTER_PCS_SHIFT (4U) /*!< DSPI master PCS shift macro , internal used. */
+#define DSPI_MASTER_PCS_MASK (0xF0U) /*!< DSPI master PCS mask macro , internal used. */
+/*! @brief Can use this enumeration for DSPI master transfer configFlags. */
+enum _dspi_transfer_config_flag_for_master
+{
+ kDSPI_MasterCtar0 = 0U << DSPI_MASTER_CTAR_SHIFT, /*!< DSPI master transfer use CTAR0 setting. */
+ kDSPI_MasterCtar1 = 1U << DSPI_MASTER_CTAR_SHIFT, /*!< DSPI master transfer use CTAR1 setting. */
+ kDSPI_MasterCtar2 = 2U << DSPI_MASTER_CTAR_SHIFT, /*!< DSPI master transfer use CTAR2 setting. */
+ kDSPI_MasterCtar3 = 3U << DSPI_MASTER_CTAR_SHIFT, /*!< DSPI master transfer use CTAR3 setting. */
+ kDSPI_MasterCtar4 = 4U << DSPI_MASTER_CTAR_SHIFT, /*!< DSPI master transfer use CTAR4 setting. */
+ kDSPI_MasterCtar5 = 5U << DSPI_MASTER_CTAR_SHIFT, /*!< DSPI master transfer use CTAR5 setting. */
+ kDSPI_MasterCtar6 = 6U << DSPI_MASTER_CTAR_SHIFT, /*!< DSPI master transfer use CTAR6 setting. */
+ kDSPI_MasterCtar7 = 7U << DSPI_MASTER_CTAR_SHIFT, /*!< DSPI master transfer use CTAR7 setting. */
+
+ kDSPI_MasterPcs0 = 0U << DSPI_MASTER_PCS_SHIFT, /*!< DSPI master transfer use PCS0 signal. */
+ kDSPI_MasterPcs1 = 1U << DSPI_MASTER_PCS_SHIFT, /*!< DSPI master transfer use PCS1 signal. */
+ kDSPI_MasterPcs2 = 2U << DSPI_MASTER_PCS_SHIFT, /*!< DSPI master transfer use PCS2 signal.*/
+ kDSPI_MasterPcs3 = 3U << DSPI_MASTER_PCS_SHIFT, /*!< DSPI master transfer use PCS3 signal. */
+ kDSPI_MasterPcs4 = 4U << DSPI_MASTER_PCS_SHIFT, /*!< DSPI master transfer use PCS4 signal. */
+ kDSPI_MasterPcs5 = 5U << DSPI_MASTER_PCS_SHIFT, /*!< DSPI master transfer use PCS5 signal. */
+
+ kDSPI_MasterPcsContinuous = 1U << 20, /*!< Is PCS signal continuous. */
+ kDSPI_MasterActiveAfterTransfer = 1U << 21, /*!< Is PCS signal active after last frame transfer.*/
+};
+
+#define DSPI_SLAVE_CTAR_SHIFT (0U) /*!< DSPI slave CTAR shift macro , internal used. */
+#define DSPI_SLAVE_CTAR_MASK (0x07U) /*!< DSPI slave CTAR mask macro , internal used. */
+/*! @brief Can use this enum for DSPI slave transfer configFlags. */
+enum _dspi_transfer_config_flag_for_slave
+{
+ kDSPI_SlaveCtar0 = 0U << DSPI_SLAVE_CTAR_SHIFT, /*!< DSPI slave transfer use CTAR0 setting. */
+ /*!< DSPI slave can only use PCS0. */
+};
+
+/*! @brief DSPI transfer state, which is used for DSPI transactional API state machine. */
+enum _dspi_transfer_state
+{
+ kDSPI_Idle = 0x0U, /*!< Nothing in the transmitter/receiver. */
+ kDSPI_Busy, /*!< Transfer queue is not finished. */
+ kDSPI_Error /*!< Transfer error. */
+};
+
+/*! @brief DSPI master command date configuration used for SPIx_PUSHR.*/
+typedef struct _dspi_command_data_config
+{
+ bool isPcsContinuous; /*!< Option to enable the continuous assertion of chip select between transfers.*/
+ dspi_ctar_selection_t whichCtar; /*!< The desired Clock and Transfer Attributes
+ Register (CTAR) to use for CTAS.*/
+ dspi_which_pcs_t whichPcs; /*!< The desired PCS signal to use for the data transfer.*/
+ bool isEndOfQueue; /*!< Signals that the current transfer is the last in the queue.*/
+ bool clearTransferCount; /*!< Clears SPI Transfer Counter (SPI_TCNT) before transmission starts.*/
+} dspi_command_data_config_t;
+
+/*! @brief DSPI master ctar configuration structure.*/
+typedef struct _dspi_master_ctar_config
+{
+ uint32_t baudRate; /*!< Baud Rate for DSPI. */
+ uint32_t bitsPerFrame; /*!< Bits per frame, minimum 4, maximum 16.*/
+ dspi_clock_polarity_t cpol; /*!< Clock polarity. */
+ dspi_clock_phase_t cpha; /*!< Clock phase. */
+ dspi_shift_direction_t direction; /*!< MSB or LSB data shift direction. */
+
+ uint32_t pcsToSckDelayInNanoSec; /*!< PCS to SCK delay time with nanosecond , set to 0 sets the minimum
+ delay. It sets the boundary value if out of range that can be set.*/
+ uint32_t lastSckToPcsDelayInNanoSec; /*!< Last SCK to PCS delay time with nanosecond , set to 0 sets the
+ minimum delay.It sets the boundary value if out of range that can be
+ set.*/
+ uint32_t betweenTransferDelayInNanoSec; /*!< After SCK delay time with nanosecond , set to 0 sets the minimum
+ delay.It sets the boundary value if out of range that can be set.*/
+} dspi_master_ctar_config_t;
+
+/*! @brief DSPI master configuration structure.*/
+typedef struct _dspi_master_config
+{
+ dspi_ctar_selection_t whichCtar; /*!< Desired CTAR to use. */
+ dspi_master_ctar_config_t ctarConfig; /*!< Set the ctarConfig to the desired CTAR. */
+
+ dspi_which_pcs_t whichPcs; /*!< Desired Peripheral Chip Select (pcs). */
+ dspi_pcs_polarity_config_t pcsActiveHighOrLow; /*!< Desired PCS active high or low. */
+
+ bool enableContinuousSCK; /*!< CONT_SCKE, continuous SCK enable . Note that continuous SCK is only
+ supported for CPHA = 1.*/
+ bool enableRxFifoOverWrite; /*!< ROOE, Receive FIFO overflow overwrite enable. ROOE = 0, the incoming
+ data is ignored, the data from the transfer that generated the overflow
+ is either ignored. ROOE = 1, the incoming data is shifted in to the
+ shift to the shift register. */
+
+ bool enableModifiedTimingFormat; /*!< Enables a modified transfer format to be used if it's true.*/
+ dspi_master_sample_point_t samplePoint; /*!< Controls when the module master samples SIN in Modified Transfer
+ Format. It's valid only when CPHA=0. */
+} dspi_master_config_t;
+
+/*! @brief DSPI slave ctar configuration structure.*/
+typedef struct _dspi_slave_ctar_config
+{
+ uint32_t bitsPerFrame; /*!< Bits per frame, minimum 4, maximum 16.*/
+ dspi_clock_polarity_t cpol; /*!< Clock polarity. */
+ dspi_clock_phase_t cpha; /*!< Clock phase. */
+ /*!< Slave only supports MSB , does not support LSB.*/
+} dspi_slave_ctar_config_t;
+
+/*! @brief DSPI slave configuration structure.*/
+typedef struct _dspi_slave_config
+{
+ dspi_ctar_selection_t whichCtar; /*!< Desired CTAR to use. */
+ dspi_slave_ctar_config_t ctarConfig; /*!< Set the ctarConfig to the desired CTAR. */
+
+ bool enableContinuousSCK; /*!< CONT_SCKE, continuous SCK enable. Note that continuous SCK is only
+ supported for CPHA = 1.*/
+ bool enableRxFifoOverWrite; /*!< ROOE, Receive FIFO overflow overwrite enable. ROOE = 0, the incoming
+ data is ignored, the data from the transfer that generated the overflow
+ is either ignored. ROOE = 1, the incoming data is shifted in to the
+ shift to the shift register. */
+ bool enableModifiedTimingFormat; /*!< Enables a modified transfer format to be used if it's true.*/
+ dspi_master_sample_point_t samplePoint; /*!< Controls when the module master samples SIN in Modified Transfer
+ Format. It's valid only when CPHA=0. */
+} dspi_slave_config_t;
+
+/*!
+* @brief Forward declaration of the _dspi_master_handle typedefs.
+*/
+typedef struct _dspi_master_handle dspi_master_handle_t;
+
+/*!
+* @brief Forward declaration of the _dspi_slave_handle typedefs.
+*/
+typedef struct _dspi_slave_handle dspi_slave_handle_t;
+
+/*!
+ * @brief Completion callback function pointer type.
+ *
+ * @param base DSPI peripheral address.
+ * @param handle Pointer to the handle for the DSPI master.
+ * @param status Success or error code describing whether the transfer completed.
+ * @param userData Arbitrary pointer-dataSized value passed from the application.
+ */
+typedef void (*dspi_master_transfer_callback_t)(SPI_Type *base,
+ dspi_master_handle_t *handle,
+ status_t status,
+ void *userData);
+/*!
+ * @brief Completion callback function pointer type.
+ *
+ * @param base DSPI peripheral address.
+ * @param handle Pointer to the handle for the DSPI slave.
+ * @param status Success or error code describing whether the transfer completed.
+ * @param userData Arbitrary pointer-dataSized value passed from the application.
+ */
+typedef void (*dspi_slave_transfer_callback_t)(SPI_Type *base,
+ dspi_slave_handle_t *handle,
+ status_t status,
+ void *userData);
+
+/*! @brief DSPI master/slave transfer structure.*/
+typedef struct _dspi_transfer
+{
+ uint8_t *txData; /*!< Send buffer. */
+ uint8_t *rxData; /*!< Receive buffer. */
+ volatile size_t dataSize; /*!< Transfer bytes. */
+
+ uint32_t
+ configFlags; /*!< Transfer transfer configuration flags , set from _dspi_transfer_config_flag_for_master if the
+ transfer is used for master or _dspi_transfer_config_flag_for_slave enumeration if the transfer
+ is used for slave.*/
+} dspi_transfer_t;
+
+/*! @brief DSPI master transfer handle structure used for transactional API. */
+struct _dspi_master_handle
+{
+ uint32_t bitsPerFrame; /*!< Desired number of bits per frame. */
+ volatile uint32_t command; /*!< Desired data command. */
+ volatile uint32_t lastCommand; /*!< Desired last data command. */
+
+ uint8_t fifoSize; /*!< FIFO dataSize. */
+
+ volatile bool isPcsActiveAfterTransfer; /*!< Is PCS signal keep active after the last frame transfer.*/
+ volatile bool isThereExtraByte; /*!< Is there extra byte.*/
+
+ uint8_t *volatile txData; /*!< Send buffer. */
+ uint8_t *volatile rxData; /*!< Receive buffer. */
+ volatile size_t remainingSendByteCount; /*!< Number of bytes remaining to send.*/
+ volatile size_t remainingReceiveByteCount; /*!< Number of bytes remaining to receive.*/
+ size_t totalByteCount; /*!< Number of transfer bytes*/
+
+ volatile uint8_t state; /*!< DSPI transfer state , _dspi_transfer_state.*/
+
+ dspi_master_transfer_callback_t callback; /*!< Completion callback. */
+ void *userData; /*!< Callback user data. */
+};
+
+/*! @brief DSPI slave transfer handle structure used for transactional API. */
+struct _dspi_slave_handle
+{
+ uint32_t bitsPerFrame; /*!< Desired number of bits per frame. */
+ volatile bool isThereExtraByte; /*!< Is there extra byte.*/
+
+ uint8_t *volatile txData; /*!< Send buffer. */
+ uint8_t *volatile rxData; /*!< Receive buffer. */
+ volatile size_t remainingSendByteCount; /*!< Number of bytes remaining to send.*/
+ volatile size_t remainingReceiveByteCount; /*!< Number of bytes remaining to receive.*/
+ size_t totalByteCount; /*!< Number of transfer bytes*/
+
+ volatile uint8_t state; /*!< DSPI transfer state.*/
+
+ volatile uint32_t errorCount; /*!< Error count for slave transfer.*/
+
+ dspi_slave_transfer_callback_t callback; /*!< Completion callback. */
+ void *userData; /*!< Callback user data. */
+};
+
+/**********************************************************************************************************************
+ * API
+ *********************************************************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /*_cplusplus*/
+
+/*!
+ * @name Initialization and deinitialization
+ * @{
+ */
+
+/*!
+ * @brief Initializes the DSPI master.
+ *
+ * This function initializes the DSPI master configuration. An example use case is as follows:
+ * @code
+ * dspi_master_config_t masterConfig;
+ * masterConfig.whichCtar = kDSPI_Ctar0;
+ * masterConfig.ctarConfig.baudRate = 500000000;
+ * masterConfig.ctarConfig.bitsPerFrame = 8;
+ * masterConfig.ctarConfig.cpol = kDSPI_ClockPolarityActiveHigh;
+ * masterConfig.ctarConfig.cpha = kDSPI_ClockPhaseFirstEdge;
+ * masterConfig.ctarConfig.direction = kDSPI_MsbFirst;
+ * masterConfig.ctarConfig.pcsToSckDelayInNanoSec = 1000000000 / masterConfig.ctarConfig.baudRate ;
+ * masterConfig.ctarConfig.lastSckToPcsDelayInNanoSec = 1000000000 / masterConfig.ctarConfig.baudRate ;
+ * masterConfig.ctarConfig.betweenTransferDelayInNanoSec = 1000000000 / masterConfig.ctarConfig.baudRate ;
+ * masterConfig.whichPcs = kDSPI_Pcs0;
+ * masterConfig.pcsActiveHighOrLow = kDSPI_PcsActiveLow;
+ * masterConfig.enableContinuousSCK = false;
+ * masterConfig.enableRxFifoOverWrite = false;
+ * masterConfig.enableModifiedTimingFormat = false;
+ * masterConfig.samplePoint = kDSPI_SckToSin0Clock;
+ * DSPI_MasterInit(base, &masterConfig, srcClock_Hz);
+ * @endcode
+ *
+ * @param base DSPI peripheral address.
+ * @param masterConfig Pointer to structure dspi_master_config_t.
+ * @param srcClock_Hz Module source input clock in Hertz
+ */
+void DSPI_MasterInit(SPI_Type *base, const dspi_master_config_t *masterConfig, uint32_t srcClock_Hz);
+
+/*!
+ * @brief Sets the dspi_master_config_t structure to default values.
+ *
+ * The purpose of this API is to get the configuration structure initialized for the DSPI_MasterInit().
+ * User may use the initialized structure unchanged in DSPI_MasterInit() or modify the structure
+ * before calling DSPI_MasterInit().
+ * Example:
+ * @code
+ * dspi_master_config_t masterConfig;
+ * DSPI_MasterGetDefaultConfig(&masterConfig);
+ * @endcode
+ * @param masterConfig pointer to dspi_master_config_t structure
+ */
+void DSPI_MasterGetDefaultConfig(dspi_master_config_t *masterConfig);
+
+/*!
+ * @brief DSPI slave configuration.
+ *
+ * This function initializes the DSPI slave configuration. An example use case is as follows:
+ * @code
+ * dspi_slave_config_t slaveConfig;
+ * slaveConfig->whichCtar = kDSPI_Ctar0;
+ * slaveConfig->ctarConfig.bitsPerFrame = 8;
+ * slaveConfig->ctarConfig.cpol = kDSPI_ClockPolarityActiveHigh;
+ * slaveConfig->ctarConfig.cpha = kDSPI_ClockPhaseFirstEdge;
+ * slaveConfig->enableContinuousSCK = false;
+ * slaveConfig->enableRxFifoOverWrite = false;
+ * slaveConfig->enableModifiedTimingFormat = false;
+ * slaveConfig->samplePoint = kDSPI_SckToSin0Clock;
+ * DSPI_SlaveInit(base, &slaveConfig);
+ * @endcode
+ *
+ * @param base DSPI peripheral address.
+ * @param slaveConfig Pointer to structure dspi_master_config_t.
+ */
+void DSPI_SlaveInit(SPI_Type *base, const dspi_slave_config_t *slaveConfig);
+
+/*!
+ * @brief Sets the dspi_slave_config_t structure to default values.
+ *
+ * The purpose of this API is to get the configuration structure initialized for the DSPI_SlaveInit().
+ * User may use the initialized structure unchanged in DSPI_SlaveInit(), or modify the structure
+ * before calling DSPI_SlaveInit().
+ * Example:
+ * @code
+ * dspi_slave_config_t slaveConfig;
+ * DSPI_SlaveGetDefaultConfig(&slaveConfig);
+ * @endcode
+ * @param slaveConfig pointer to dspi_slave_config_t structure.
+ */
+void DSPI_SlaveGetDefaultConfig(dspi_slave_config_t *slaveConfig);
+
+/*!
+ * @brief De-initializes the DSPI peripheral. Call this API to disable the DSPI clock.
+ * @param base DSPI peripheral address.
+ */
+void DSPI_Deinit(SPI_Type *base);
+
+/*!
+ * @brief Enables the DSPI peripheral and sets the MCR MDIS to 0.
+ *
+ * @param base DSPI peripheral address.
+ * @param enable pass true to enable module, false to disable module.
+ */
+static inline void DSPI_Enable(SPI_Type *base, bool enable)
+{
+ if (enable)
+ {
+ base->MCR &= ~SPI_MCR_MDIS_MASK;
+ }
+ else
+ {
+ base->MCR |= SPI_MCR_MDIS_MASK;
+ }
+}
+
+/*!
+ *@}
+*/
+
+/*!
+ * @name Status
+ * @{
+ */
+
+/*!
+ * @brief Gets the DSPI status flag state.
+ * @param base DSPI peripheral address.
+ * @return The DSPI status(in SR register).
+ */
+static inline uint32_t DSPI_GetStatusFlags(SPI_Type *base)
+{
+ return (base->SR);
+}
+
+/*!
+ * @brief Clears the DSPI status flag.
+ *
+ * This function clears the desired status bit by using a write-1-to-clear. The user passes in the base and the
+ * desired status bit to clear. The list of status bits is defined in the dspi_status_and_interrupt_request_t. The
+ * function uses these bit positions in its algorithm to clear the desired flag state.
+ * Example usage:
+ * @code
+ * DSPI_ClearStatusFlags(base, kDSPI_TxCompleteFlag|kDSPI_EndOfQueueFlag);
+ * @endcode
+ *
+ * @param base DSPI peripheral address.
+ * @param statusFlags The status flag , used from type dspi_flags.
+ */
+static inline void DSPI_ClearStatusFlags(SPI_Type *base, uint32_t statusFlags)
+{
+ base->SR = statusFlags; /*!< The status flags are cleared by writing 1 (w1c).*/
+}
+
+/*!
+ *@}
+*/
+
+/*!
+ * @name Interrupts
+ * @{
+ */
+
+/*!
+ * @brief Enables the DSPI interrupts.
+ *
+ * This function configures the various interrupt masks of the DSPI. The parameters are base and an interrupt mask.
+ * Note, for Tx Fill and Rx FIFO drain requests, enable the interrupt request and disable the DMA request.
+ *
+ * @code
+ * DSPI_EnableInterrupts(base, kDSPI_TxCompleteInterruptEnable | kDSPI_EndOfQueueInterruptEnable );
+ * @endcode
+ *
+ * @param base DSPI peripheral address.
+ * @param mask The interrupt mask, can use the enum _dspi_interrupt_enable.
+ */
+void DSPI_EnableInterrupts(SPI_Type *base, uint32_t mask);
+
+/*!
+ * @brief Disables the DSPI interrupts.
+ *
+ * @code
+ * DSPI_DisableInterrupts(base, kDSPI_TxCompleteInterruptEnable | kDSPI_EndOfQueueInterruptEnable );
+ * @endcode
+ *
+ * @param base DSPI peripheral address.
+ * @param mask The interrupt mask, can use the enum _dspi_interrupt_enable.
+ */
+static inline void DSPI_DisableInterrupts(SPI_Type *base, uint32_t mask)
+{
+ base->RSER &= ~mask;
+}
+
+/*!
+ *@}
+*/
+
+/*!
+ * @name DMA Control
+ * @{
+ */
+
+/*!
+ * @brief Enables the DSPI DMA request.
+ *
+ * This function configures the Rx and Tx DMA mask of the DSPI. The parameters are base and a DMA mask.
+ * @code
+ * DSPI_EnableDMA(base, kDSPI_TxDmaEnable | kDSPI_RxDmaEnable);
+ * @endcode
+ *
+ * @param base DSPI peripheral address.
+ * @param mask The interrupt mask can use the enum dspi_dma_enable.
+ */
+static inline void DSPI_EnableDMA(SPI_Type *base, uint32_t mask)
+{
+ base->RSER |= mask;
+}
+
+/*!
+ * @brief Disables the DSPI DMA request.
+ *
+ * This function configures the Rx and Tx DMA mask of the DSPI. The parameters are base and a DMA mask.
+ * @code
+ * SPI_DisableDMA(base, kDSPI_TxDmaEnable | kDSPI_RxDmaEnable);
+ * @endcode
+ *
+ * @param base DSPI peripheral address.
+ * @param mask The interrupt mask can use the enum dspi_dma_enable.
+ */
+static inline void DSPI_DisableDMA(SPI_Type *base, uint32_t mask)
+{
+ base->RSER &= ~mask;
+}
+
+/*!
+ * @brief Gets the DSPI master PUSHR data register address for the DMA operation.
+ *
+ * This function gets the DSPI master PUSHR data register address because this value is needed for the DMA operation.
+ *
+ * @param base DSPI peripheral address.
+ * @return The DSPI master PUSHR data register address.
+ */
+static inline uint32_t DSPI_MasterGetTxRegisterAddress(SPI_Type *base)
+{
+ return (uint32_t) & (base->PUSHR);
+}
+
+/*!
+ * @brief Gets the DSPI slave PUSHR data register address for the DMA operation.
+ *
+ * This function gets the DSPI slave PUSHR data register address as this value is needed for the DMA operation.
+ *
+ * @param base DSPI peripheral address.
+ * @return The DSPI slave PUSHR data register address.
+ */
+static inline uint32_t DSPI_SlaveGetTxRegisterAddress(SPI_Type *base)
+{
+ return (uint32_t) & (base->PUSHR_SLAVE);
+}
+
+/*!
+ * @brief Gets the DSPI POPR data register address for the DMA operation.
+ *
+ * This function gets the DSPI POPR data register address as this value is needed for the DMA operation.
+ *
+ * @param base DSPI peripheral address.
+ * @return The DSPI POPR data register address.
+ */
+static inline uint32_t DSPI_GetRxRegisterAddress(SPI_Type *base)
+{
+ return (uint32_t) & (base->POPR);
+}
+
+/*!
+ *@}
+*/
+
+/*!
+ * @name Bus Operations
+ * @{
+ */
+
+/*!
+ * @brief Configures the DSPI for master or slave.
+ *
+ * @param base DSPI peripheral address.
+ * @param mode Mode setting (master or slave) of type dspi_master_slave_mode_t.
+ */
+static inline void DSPI_SetMasterSlaveMode(SPI_Type *base, dspi_master_slave_mode_t mode)
+{
+ base->MCR = (base->MCR & (~SPI_MCR_MSTR_MASK)) | SPI_MCR_MSTR(mode);
+}
+
+/*!
+ * @brief Returns whether the DSPI module is in master mode.
+ *
+ * @param base DSPI peripheral address.
+ * @return Returns true if the module is in master mode or false if the module is in slave mode.
+ */
+static inline bool DSPI_IsMaster(SPI_Type *base)
+{
+ return (bool)((base->MCR) & SPI_MCR_MSTR_MASK);
+}
+/*!
+ * @brief Starts the DSPI transfers and clears HALT bit in MCR.
+ *
+ * This function sets the module to begin data transfer in either master or slave mode.
+ *
+ * @param base DSPI peripheral address.
+ */
+static inline void DSPI_StartTransfer(SPI_Type *base)
+{
+ base->MCR &= ~SPI_MCR_HALT_MASK;
+}
+/*!
+ * @brief Stops (halts) DSPI transfers and sets HALT bit in MCR.
+ *
+ * This function stops data transfers in either master or slave mode.
+ *
+ * @param base DSPI peripheral address.
+ */
+static inline void DSPI_StopTransfer(SPI_Type *base)
+{
+ base->MCR |= SPI_MCR_HALT_MASK;
+}
+
+/*!
+ * @brief Enables (or disables) the DSPI FIFOs.
+ *
+ * This function allows the caller to disable/enable the Tx and Rx FIFOs (independently).
+ * Note that to disable, the caller must pass in a logic 0 (false) for the particular FIFO configuration. To enable,
+ * the caller must pass in a logic 1 (true).
+ *
+ * @param base DSPI peripheral address.
+ * @param enableTxFifo Disables (false) the TX FIFO, else enables (true) the TX FIFO
+ * @param enableRxFifo Disables (false) the RX FIFO, else enables (true) the RX FIFO
+ */
+static inline void DSPI_SetFifoEnable(SPI_Type *base, bool enableTxFifo, bool enableRxFifo)
+{
+ base->MCR = (base->MCR & (~(SPI_MCR_DIS_RXF_MASK | SPI_MCR_DIS_TXF_MASK))) | SPI_MCR_DIS_TXF(!enableTxFifo) |
+ SPI_MCR_DIS_RXF(!enableRxFifo);
+}
+
+/*!
+ * @brief Flushes the DSPI FIFOs.
+ *
+ * @param base DSPI peripheral address.
+ * @param flushTxFifo Flushes (true) the Tx FIFO, else do not flush (false) the Tx FIFO
+ * @param flushRxFifo Flushes (true) the Rx FIFO, else do not flush (false) the Rx FIFO
+ */
+static inline void DSPI_FlushFifo(SPI_Type *base, bool flushTxFifo, bool flushRxFifo)
+{
+ base->MCR = (base->MCR & (~(SPI_MCR_CLR_TXF_MASK | SPI_MCR_CLR_RXF_MASK))) | SPI_MCR_CLR_TXF(flushTxFifo) |
+ SPI_MCR_CLR_RXF(flushRxFifo);
+}
+
+/*!
+ * @brief Configures the DSPI peripheral chip select polarity simultaneously.
+ * For example, PCS0 and PCS1 set to active low and other PCS set to active high. Note that the number of
+ * PCSs is specific to the device.
+ * @code
+ * DSPI_SetAllPcsPolarity(base, kDSPI_Pcs0ActiveLow | kDSPI_Pcs1ActiveLow);
+ @endcode
+ * @param base DSPI peripheral address.
+ * @param mask The PCS polarity mask , can use the enum _dspi_pcs_polarity.
+ */
+static inline void DSPI_SetAllPcsPolarity(SPI_Type *base, uint32_t mask)
+{
+ base->MCR = (base->MCR & ~SPI_MCR_PCSIS_MASK) | SPI_MCR_PCSIS(mask);
+}
+
+/*!
+ * @brief Sets the DSPI baud rate in bits per second.
+ *
+ * This function takes in the desired baudRate_Bps (baud rate) and calculates the nearest possible baud rate without
+ * exceeding the desired baud rate, and returns the calculated baud rate in bits-per-second. It requires that the
+ * caller also provide the frequency of the module source clock (in Hertz).
+ *
+ * @param base DSPI peripheral address.
+ * @param whichCtar The desired Clock and Transfer Attributes Register (CTAR) of the type dspi_ctar_selection_t
+ * @param baudRate_Bps The desired baud rate in bits per second
+ * @param srcClock_Hz Module source input clock in Hertz
+ * @return The actual calculated baud rate
+ */
+uint32_t DSPI_MasterSetBaudRate(SPI_Type *base,
+ dspi_ctar_selection_t whichCtar,
+ uint32_t baudRate_Bps,
+ uint32_t srcClock_Hz);
+
+/*!
+ * @brief Manually configures the delay prescaler and scaler for a particular CTAR.
+ *
+ * This function configures the PCS to SCK delay pre-scalar (PcsSCK) and scalar (CSSCK), after SCK delay pre-scalar
+ * (PASC) and scalar (ASC), and the delay after transfer pre-scalar (PDT)and scalar (DT).
+ *
+ * These delay names are available in type dspi_delay_type_t.
+ *
+ * The user passes the delay to configure along with the prescaler and scaler value.
+ * This allows the user to directly set the prescaler/scaler values if they have pre-calculated them or if they simply
+ * wish to manually increment either value.
+ *
+ * @param base DSPI peripheral address.
+ * @param whichCtar The desired Clock and Transfer Attributes Register (CTAR) of type dspi_ctar_selection_t.
+ * @param prescaler The prescaler delay value (can be an integer 0, 1, 2, or 3).
+ * @param scaler The scaler delay value (can be any integer between 0 to 15).
+ * @param whichDelay The desired delay to configure, must be of type dspi_delay_type_t
+ */
+void DSPI_MasterSetDelayScaler(
+ SPI_Type *base, dspi_ctar_selection_t whichCtar, uint32_t prescaler, uint32_t scaler, dspi_delay_type_t whichDelay);
+
+/*!
+ * @brief Calculates the delay prescaler and scaler based on the desired delay input in nanoseconds.
+ *
+ * This function calculates the values for:
+ * PCS to SCK delay pre-scalar (PCSSCK) and scalar (CSSCK), or
+ * After SCK delay pre-scalar (PASC) and scalar (ASC), or
+ * Delay after transfer pre-scalar (PDT)and scalar (DT).
+ *
+ * These delay names are available in type dspi_delay_type_t.
+ *
+ * The user passes which delay they want to configure along with the desired delay value in nanoseconds. The function
+ * calculates the values needed for the prescaler and scaler and returning the actual calculated delay as an exact
+ * delay match may not be possible. In this case, the closest match is calculated without going below the desired
+ * delay value input.
+ * It is possible to input a very large delay value that exceeds the capability of the part, in which case the maximum
+ * supported delay is returned. The higher-level peripheral driver alerts the user of an out of range delay
+ * input.
+ *
+ * @param base DSPI peripheral address.
+ * @param whichCtar The desired Clock and Transfer Attributes Register (CTAR) of type dspi_ctar_selection_t.
+ * @param whichDelay The desired delay to configure, must be of type dspi_delay_type_t
+ * @param srcClock_Hz Module source input clock in Hertz
+ * @param delayTimeInNanoSec The desired delay value in nanoseconds.
+ * @return The actual calculated delay value.
+ */
+uint32_t DSPI_MasterSetDelayTimes(SPI_Type *base,
+ dspi_ctar_selection_t whichCtar,
+ dspi_delay_type_t whichDelay,
+ uint32_t srcClock_Hz,
+ uint32_t delayTimeInNanoSec);
+
+/*!
+ * @brief Writes data into the data buffer for master mode.
+ *
+ * In master mode, the 16-bit data is appended to the 16-bit command info. The command portion
+ * provides characteristics of the data such as the optional continuous chip select
+ * operation between transfers, the desired Clock and Transfer Attributes register to use for the
+ * associated SPI frame, the desired PCS signal to use for the data transfer, whether the current
+ * transfer is the last in the queue, and whether to clear the transfer count (normally needed when
+ * sending the first frame of a data packet). This is an example:
+ * @code
+ * dspi_command_data_config_t commandConfig;
+ * commandConfig.isPcsContinuous = true;
+ * commandConfig.whichCtar = kDSPICtar0;
+ * commandConfig.whichPcs = kDSPIPcs0;
+ * commandConfig.clearTransferCount = false;
+ * commandConfig.isEndOfQueue = false;
+ * DSPI_MasterWriteData(base, &commandConfig, dataWord);
+ @endcode
+ *
+ * @param base DSPI peripheral address.
+ * @param command Pointer to command structure.
+ * @param data The data word to be sent.
+ */
+static inline void DSPI_MasterWriteData(SPI_Type *base, dspi_command_data_config_t *command, uint16_t data)
+{
+ base->PUSHR = SPI_PUSHR_CONT(command->isPcsContinuous) | SPI_PUSHR_CTAS(command->whichCtar) |
+ SPI_PUSHR_PCS(command->whichPcs) | SPI_PUSHR_EOQ(command->isEndOfQueue) |
+ SPI_PUSHR_CTCNT(command->clearTransferCount) | SPI_PUSHR_TXDATA(data);
+}
+
+/*!
+ * @brief Sets the dspi_command_data_config_t structure to default values.
+ *
+ * The purpose of this API is to get the configuration structure initialized for use in the DSPI_MasterWrite_xx().
+ * User may use the initialized structure unchanged in DSPI_MasterWrite_xx() or modify the structure
+ * before calling DSPI_MasterWrite_xx().
+ * Example:
+ * @code
+ * dspi_command_data_config_t command;
+ * DSPI_GetDefaultDataCommandConfig(&command);
+ * @endcode
+ * @param command pointer to dspi_command_data_config_t structure.
+ */
+void DSPI_GetDefaultDataCommandConfig(dspi_command_data_config_t *command);
+
+/*!
+ * @brief Writes data into the data buffer master mode and waits till complete to return.
+ *
+ * In master mode, the 16-bit data is appended to the 16-bit command info. The command portion
+ * provides characteristics of the data such as the optional continuous chip select
+ * operation between transfers, the desired Clock and Transfer Attributes register to use for the
+ * associated SPI frame, the desired PCS signal to use for the data transfer, whether the current
+ * transfer is the last in the queue, and whether to clear the transfer count (normally needed when
+ * sending the first frame of a data packet). This is an example:
+ * @code
+ * dspi_command_config_t commandConfig;
+ * commandConfig.isPcsContinuous = true;
+ * commandConfig.whichCtar = kDSPICtar0;
+ * commandConfig.whichPcs = kDSPIPcs1;
+ * commandConfig.clearTransferCount = false;
+ * commandConfig.isEndOfQueue = false;
+ * DSPI_MasterWriteDataBlocking(base, &commandConfig, dataWord);
+ * @endcode
+ *
+ * Note that this function does not return until after the transmit is complete. Also note that the DSPI must be
+ * enabled and running to transmit data (MCR[MDIS] & [HALT] = 0). Because the SPI is a synchronous protocol,
+ * receive data is available when transmit completes.
+ *
+ * @param base DSPI peripheral address.
+ * @param command Pointer to command structure.
+ * @param data The data word to be sent.
+ */
+void DSPI_MasterWriteDataBlocking(SPI_Type *base, dspi_command_data_config_t *command, uint16_t data);
+
+/*!
+ * @brief Returns the DSPI command word formatted to the PUSHR data register bit field.
+ *
+ * This function allows the caller to pass in the data command structure and returns the command word formatted
+ * according to the DSPI PUSHR register bit field placement. The user can then "OR" the returned command word with the
+ * desired data to send and use the function DSPI_HAL_WriteCommandDataMastermode or
+ * DSPI_HAL_WriteCommandDataMastermodeBlocking to write the entire 32-bit command data word to the PUSHR. This helps
+ * improve performance in cases where the command structure is constant. For example, the user calls this function
+ * before starting a transfer to generate the command word. When they are ready to transmit the data, they OR
+ * this formatted command word with the desired data to transmit. This process increases transmit performance when
+ * compared to calling send functions such as DSPI_HAL_WriteDataMastermode which format the command word each time a
+ * data word is to be sent.
+ *
+ * @param command Pointer to command structure.
+ * @return The command word formatted to the PUSHR data register bit field.
+ */
+static inline uint32_t DSPI_MasterGetFormattedCommand(dspi_command_data_config_t *command)
+{
+ /* Format the 16-bit command word according to the PUSHR data register bit field*/
+ return (uint32_t)(SPI_PUSHR_CONT(command->isPcsContinuous) | SPI_PUSHR_CTAS(command->whichCtar) |
+ SPI_PUSHR_PCS(command->whichPcs) | SPI_PUSHR_EOQ(command->isEndOfQueue) |
+ SPI_PUSHR_CTCNT(command->clearTransferCount));
+}
+
+/*!
+ * @brief Writes a 32-bit data word (16-bit command appended with 16-bit data) into the data
+ * buffer, master mode and waits till complete to return.
+ *
+ * In this function, the user must append the 16-bit data to the 16-bit command info then provide the total 32-bit word
+ * as the data to send.
+ * The command portion provides characteristics of the data such as the optional continuous chip select operation
+* between
+ * transfers, the desired Clock and Transfer Attributes register to use for the associated SPI frame, the desired PCS
+ * signal to use for the data transfer, whether the current transfer is the last in the queue, and whether to clear the
+ * transfer count (normally needed when sending the first frame of a data packet). The user is responsible for
+ * appending this command with the data to send. This is an example:
+ * @code
+ * dataWord = <16-bit command> | <16-bit data>;
+ * DSPI_HAL_WriteCommandDataMastermodeBlocking(base, dataWord);
+ * @endcode
+ *
+ * Note that this function does not return until after the transmit is complete. Also note that the DSPI must be
+ * enabled and running to transmit data (MCR[MDIS] & [HALT] = 0).
+ * Because the SPI is a synchronous protocol, the receive data is available when transmit completes.
+ *
+ * For a blocking polling transfer, see methods below.
+ * Option 1:
+* uint32_t command_to_send = DSPI_MasterGetFormattedCommand(&command);
+* uint32_t data0 = command_to_send | data_need_to_send_0;
+* uint32_t data1 = command_to_send | data_need_to_send_1;
+* uint32_t data2 = command_to_send | data_need_to_send_2;
+*
+* DSPI_MasterWriteCommandDataBlocking(base,data0);
+* DSPI_MasterWriteCommandDataBlocking(base,data1);
+* DSPI_MasterWriteCommandDataBlocking(base,data2);
+*
+* Option 2:
+* DSPI_MasterWriteDataBlocking(base,&command,data_need_to_send_0);
+* DSPI_MasterWriteDataBlocking(base,&command,data_need_to_send_1);
+* DSPI_MasterWriteDataBlocking(base,&command,data_need_to_send_2);
+*
+ * @param base DSPI peripheral address.
+ * @param data The data word (command and data combined) to be sent
+ */
+void DSPI_MasterWriteCommandDataBlocking(SPI_Type *base, uint32_t data);
+
+/*!
+ * @brief Writes data into the data buffer in slave mode.
+ *
+ * In slave mode, up to 16-bit words may be written.
+ *
+ * @param base DSPI peripheral address.
+ * @param data The data to send.
+ */
+static inline void DSPI_SlaveWriteData(SPI_Type *base, uint32_t data)
+{
+ base->PUSHR_SLAVE = data;
+}
+
+/*!
+ * @brief Writes data into the data buffer in slave mode, waits till data was transmitted, and returns.
+ *
+ * In slave mode, up to 16-bit words may be written. The function first clears the transmit complete flag, writes data
+ * into data register, and finally waits until the data is transmitted.
+ *
+ * @param base DSPI peripheral address.
+ * @param data The data to send.
+ */
+void DSPI_SlaveWriteDataBlocking(SPI_Type *base, uint32_t data);
+
+/*!
+ * @brief Reads data from the data buffer.
+ *
+ * @param base DSPI peripheral address.
+ * @return The data from the read data buffer.
+ */
+static inline uint32_t DSPI_ReadData(SPI_Type *base)
+{
+ return (base->POPR);
+}
+
+/*!
+ *@}
+*/
+
+/*!
+ * @name Transactional
+ * @{
+ */
+/*Transactional APIs*/
+
+/*!
+ * @brief Initializes the DSPI master handle.
+ *
+ * This function initializes the DSPI handle which can be used for other DSPI transactional APIs. Usually, for a
+ * specified DSPI instance, call this API once to get the initialized handle.
+ *
+ * @param base DSPI peripheral base address.
+ * @param handle DSPI handle pointer to dspi_master_handle_t.
+ * @param callback dspi callback.
+ * @param userData callback function parameter.
+ */
+void DSPI_MasterTransferCreateHandle(SPI_Type *base,
+ dspi_master_handle_t *handle,
+ dspi_master_transfer_callback_t callback,
+ void *userData);
+
+/*!
+ * @brief DSPI master transfer data using polling.
+ *
+ * This function transfers data with polling. This is a blocking function, which does not return until all transfers
+ * have been
+ * completed.
+ *
+ * @param base DSPI peripheral base address.
+ * @param transfer pointer to dspi_transfer_t structure.
+ * @return status of status_t.
+ */
+status_t DSPI_MasterTransferBlocking(SPI_Type *base, dspi_transfer_t *transfer);
+
+/*!
+ * @brief DSPI master transfer data using interrupts.
+ *
+ * This function transfers data using interrupts. This is a non-blocking function, which returns right away. When all
+ data
+ * have been transferred, the callback function is called.
+
+ * @param base DSPI peripheral base address.
+ * @param handle pointer to dspi_master_handle_t structure which stores the transfer state.
+ * @param transfer pointer to dspi_transfer_t structure.
+ * @return status of status_t.
+ */
+status_t DSPI_MasterTransferNonBlocking(SPI_Type *base, dspi_master_handle_t *handle, dspi_transfer_t *transfer);
+
+/*!
+ * @brief Gets the master transfer count.
+ *
+ * This function gets the master transfer count.
+ *
+ * @param base DSPI peripheral base address.
+ * @param handle pointer to dspi_master_handle_t structure which stores the transfer state.
+ * @param count Number of bytes transferred so far by the non-blocking transaction.
+ * @return status of status_t.
+ */
+status_t DSPI_MasterTransferGetCount(SPI_Type *base, dspi_master_handle_t *handle, size_t *count);
+
+/*!
+ * @brief DSPI master aborts transfer using an interrupt.
+ *
+ * This function aborts a transfer using an interrupt.
+ *
+ * @param base DSPI peripheral base address.
+ * @param handle pointer to dspi_master_handle_t structure which stores the transfer state.
+ */
+void DSPI_MasterTransferAbort(SPI_Type *base, dspi_master_handle_t *handle);
+
+/*!
+ * @brief DSPI Master IRQ handler function.
+ *
+ * This function processes the DSPI transmit and receive IRQ.
+
+ * @param base DSPI peripheral base address.
+ * @param handle pointer to dspi_master_handle_t structure which stores the transfer state.
+ */
+void DSPI_MasterTransferHandleIRQ(SPI_Type *base, dspi_master_handle_t *handle);
+
+/*!
+ * @brief Initializes the DSPI slave handle.
+ *
+ * This function initializes the DSPI handle, which can be used for other DSPI transactional APIs. Usually, for a
+ * specified DSPI instance, call this API once to get the initialized handle.
+ *
+ * @param handle DSPI handle pointer to dspi_slave_handle_t.
+ * @param base DSPI peripheral base address.
+ * @param callback DSPI callback.
+ * @param userData callback function parameter.
+ */
+void DSPI_SlaveTransferCreateHandle(SPI_Type *base,
+ dspi_slave_handle_t *handle,
+ dspi_slave_transfer_callback_t callback,
+ void *userData);
+
+/*!
+ * @brief DSPI slave transfers data using an interrupt.
+ *
+ * This function transfers data using an interrupt. This is a non-blocking function, which returns right away. When all
+ * data
+ * have been transferred, the callback function is called.
+ *
+ * @param base DSPI peripheral base address.
+ * @param handle pointer to dspi_slave_handle_t structure which stores the transfer state.
+ * @param transfer pointer to dspi_transfer_t structure.
+ * @return status of status_t.
+ */
+status_t DSPI_SlaveTransferNonBlocking(SPI_Type *base, dspi_slave_handle_t *handle, dspi_transfer_t *transfer);
+
+/*!
+ * @brief Gets the slave transfer count.
+ *
+ * This function gets the slave transfer count.
+ *
+ * @param base DSPI peripheral base address.
+ * @param handle pointer to dspi_master_handle_t structure which stores the transfer state.
+ * @param count Number of bytes transferred so far by the non-blocking transaction.
+ * @return status of status_t.
+ */
+status_t DSPI_SlaveTransferGetCount(SPI_Type *base, dspi_slave_handle_t *handle, size_t *count);
+
+/*!
+ * @brief DSPI slave aborts a transfer using an interrupt.
+ *
+ * This function aborts transfer using an interrupt.
+ *
+ * @param base DSPI peripheral base address.
+ * @param handle pointer to dspi_slave_handle_t structure which stores the transfer state.
+ */
+void DSPI_SlaveTransferAbort(SPI_Type *base, dspi_slave_handle_t *handle);
+
+/*!
+ * @brief DSPI Master IRQ handler function.
+ *
+ * This function processes the DSPI transmit and receive IRQ.
+ *
+ * @param base DSPI peripheral base address.
+ * @param handle pointer to dspi_slave_handle_t structure which stores the transfer state.
+ */
+void DSPI_SlaveTransferHandleIRQ(SPI_Type *base, dspi_slave_handle_t *handle);
+
+/*!
+ *@}
+*/
+
+#if defined(__cplusplus)
+}
+#endif /*_cplusplus*/
+ /*!
+ *@}
+ */
+
+#endif /*_FSL_DSPI_H_*/
