Diff: TARGET_KL05Z/TOOLCHAIN_IAR/PinNames.h

Revision:

171:3a7713b1edbc

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_KL05Z/TOOLCHAIN_IAR/PinNames.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,136 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT
+} PinDirection;
+
+/* PCR - 0x1000 */
+#define PORT_SHIFT  12
+
+typedef enum {
+    PTA0 = 0x0,
+    PTA1 = 0x4,
+    PTA2 = 0x8,
+    PTA3 = 0xc,
+    PTA4 = 0x10,
+    PTA5 = 0x14,
+    PTA6 = 0x18,
+    PTA7 = 0x1c,
+    PTA8 = 0x20,
+    PTA9 = 0x24,
+    PTA10 = 0x28,
+    PTA11 = 0x2c,
+    PTA12 = 0x30,
+    PTA13 = 0x34,
+    PTA14 = 0x38,
+    PTA15 = 0x3c,
+    PTA16 = 0x40,
+    PTA17 = 0x44,
+    PTA18 = 0x48,
+    PTA19 = 0x4c,
+    PTB0 = 0x1000,
+    PTB1 = 0x1004,
+    PTB2 = 0x1008,
+    PTB3 = 0x100c,
+    PTB4 = 0x1010,
+    PTB5 = 0x1014,
+    PTB6 = 0x1018,
+    PTB7 = 0x101c,
+    PTB8 = 0x1020,
+    PTB9 = 0x1024,
+    PTB10 = 0x1028,
+    PTB11 = 0x102c,
+    PTB12 = 0x1030,
+    PTB13 = 0x1034,
+    PTB14 = 0x1038,
+    PTB15 = 0x103c,
+    PTB16 = 0x1040,
+    PTB17 = 0x1044,
+    PTB18 = 0x1048,
+    PTB19 = 0x104c,
+    PTB20 = 0x1050,
+
+    LED_RED   = PTB8,
+    LED_GREEN = PTB9,
+    LED_BLUE  = PTB10,
+
+    // mbed original LED naming
+    LED1 = LED_RED,
+    LED2 = LED_GREEN,
+    LED3 = LED_BLUE,
+    LED4 = LED_BLUE,
+
+    // USB Pins
+    USBTX = PTB1,
+    USBRX = PTB2,
+
+    // Arduino Headers
+    D0 = PTB2,
+    D1 = PTB1,
+    D2 = PTA11,
+    D3 = PTB5,
+    D4 = PTA10,
+    D5 = PTA12,
+    D6 = PTB6,
+    D7 = PTB7,
+    D8 = PTB10,
+    D9 = PTB11,
+    D10 = PTA5,
+    D11 = PTA7,
+    D12 = PTA6,
+    D13 = PTB0,
+    D14 = PTB4,
+    D15 = PTB3,
+
+    A0 = PTB8,
+    A1 = PTB9,
+    A2 = PTA8,
+    A3 = PTA0,
+    A4 = PTA9,
+    A5 = PTB13,
+
+    I2C_SCL = D15,
+    I2C_SDA = D14,
+
+    TSI_ELEC0 = PTA13,
+    TSI_ELEC1 = PTB12,
+
+    // Not connected
+    NC = (int)0xFFFFFFFF
+} PinName;
+
+/* PullDown not available for KL05 */
+typedef enum {
+    PullNone = 0,
+    PullUp   = 2,
+    PullDefault = PullUp
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif