Diff: TARGET_K66F/TOOLCHAIN_IAR/PinNames.h

Revision:

171:3a7713b1edbc

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_K66F/TOOLCHAIN_IAR/PinNames.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,261 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT
+} PinDirection;
+
+#define GPIO_PORT_SHIFT 12
+
+typedef enum {
+    PTA0  = (0 << GPIO_PORT_SHIFT | 0 ),
+    PTA1  = (0 << GPIO_PORT_SHIFT | 1 ),
+    PTA2  = (0 << GPIO_PORT_SHIFT | 2 ),
+    PTA3  = (0 << GPIO_PORT_SHIFT | 3 ),
+    PTA4  = (0 << GPIO_PORT_SHIFT | 4 ),
+    PTA5  = (0 << GPIO_PORT_SHIFT | 5 ),
+    PTA6  = (0 << GPIO_PORT_SHIFT | 6 ),
+    PTA7  = (0 << GPIO_PORT_SHIFT | 7 ),
+    PTA8  = (0 << GPIO_PORT_SHIFT | 8 ),
+    PTA9  = (0 << GPIO_PORT_SHIFT | 9 ),
+    PTA10 = (0 << GPIO_PORT_SHIFT | 10),
+    PTA11 = (0 << GPIO_PORT_SHIFT | 11),
+    PTA12 = (0 << GPIO_PORT_SHIFT | 12),
+    PTA13 = (0 << GPIO_PORT_SHIFT | 13),
+    PTA14 = (0 << GPIO_PORT_SHIFT | 14),
+    PTA15 = (0 << GPIO_PORT_SHIFT | 15),
+    PTA16 = (0 << GPIO_PORT_SHIFT | 16),
+    PTA17 = (0 << GPIO_PORT_SHIFT | 17),
+    PTA18 = (0 << GPIO_PORT_SHIFT | 18),
+    PTA19 = (0 << GPIO_PORT_SHIFT | 19),
+    PTA20 = (0 << GPIO_PORT_SHIFT | 20),
+    PTA21 = (0 << GPIO_PORT_SHIFT | 21),
+    PTA22 = (0 << GPIO_PORT_SHIFT | 22),
+    PTA23 = (0 << GPIO_PORT_SHIFT | 23),
+    PTA24 = (0 << GPIO_PORT_SHIFT | 24),
+    PTA25 = (0 << GPIO_PORT_SHIFT | 25),
+    PTA26 = (0 << GPIO_PORT_SHIFT | 26),
+    PTA27 = (0 << GPIO_PORT_SHIFT | 27),
+    PTA28 = (0 << GPIO_PORT_SHIFT | 28),
+    PTA29 = (0 << GPIO_PORT_SHIFT | 29),
+    PTA30 = (0 << GPIO_PORT_SHIFT | 30),
+    PTA31 = (0 << GPIO_PORT_SHIFT | 31),
+    PTB0  = (1 << GPIO_PORT_SHIFT | 0 ),
+    PTB1  = (1 << GPIO_PORT_SHIFT | 1 ),
+    PTB2  = (1 << GPIO_PORT_SHIFT | 2 ),
+    PTB3  = (1 << GPIO_PORT_SHIFT | 3 ),
+    PTB4  = (1 << GPIO_PORT_SHIFT | 4 ),
+    PTB5  = (1 << GPIO_PORT_SHIFT | 5 ),
+    PTB6  = (1 << GPIO_PORT_SHIFT | 6 ),
+    PTB7  = (1 << GPIO_PORT_SHIFT | 7 ),
+    PTB8  = (1 << GPIO_PORT_SHIFT | 8 ),
+    PTB9  = (1 << GPIO_PORT_SHIFT | 9 ),
+    PTB10 = (1 << GPIO_PORT_SHIFT | 10),
+    PTB11 = (1 << GPIO_PORT_SHIFT | 11),
+    PTB12 = (1 << GPIO_PORT_SHIFT | 12),
+    PTB13 = (1 << GPIO_PORT_SHIFT | 13),
+    PTB14 = (1 << GPIO_PORT_SHIFT | 14),
+    PTB15 = (1 << GPIO_PORT_SHIFT | 15),
+    PTB16 = (1 << GPIO_PORT_SHIFT | 16),
+    PTB17 = (1 << GPIO_PORT_SHIFT | 17),
+    PTB18 = (1 << GPIO_PORT_SHIFT | 18),
+    PTB19 = (1 << GPIO_PORT_SHIFT | 19),
+    PTB20 = (1 << GPIO_PORT_SHIFT | 20),
+    PTB21 = (1 << GPIO_PORT_SHIFT | 21),
+    PTB22 = (1 << GPIO_PORT_SHIFT | 22),
+    PTB23 = (1 << GPIO_PORT_SHIFT | 23),
+    PTB24 = (1 << GPIO_PORT_SHIFT | 24),
+    PTB25 = (1 << GPIO_PORT_SHIFT | 25),
+    PTB26 = (1 << GPIO_PORT_SHIFT | 26),
+    PTB27 = (1 << GPIO_PORT_SHIFT | 27),
+    PTB28 = (1 << GPIO_PORT_SHIFT | 28),
+    PTB29 = (1 << GPIO_PORT_SHIFT | 29),
+    PTB30 = (1 << GPIO_PORT_SHIFT | 30),
+    PTB31 = (1 << GPIO_PORT_SHIFT | 31),
+    PTC0  = (2 << GPIO_PORT_SHIFT | 0 ),
+    PTC1  = (2 << GPIO_PORT_SHIFT | 1 ),
+    PTC2  = (2 << GPIO_PORT_SHIFT | 2 ),
+    PTC3  = (2 << GPIO_PORT_SHIFT | 3 ),
+    PTC4  = (2 << GPIO_PORT_SHIFT | 4 ),
+    PTC5  = (2 << GPIO_PORT_SHIFT | 5 ),
+    PTC6  = (2 << GPIO_PORT_SHIFT | 6 ),
+    PTC7  = (2 << GPIO_PORT_SHIFT | 7 ),
+    PTC8  = (2 << GPIO_PORT_SHIFT | 8 ),
+    PTC9  = (2 << GPIO_PORT_SHIFT | 9 ),
+    PTC10 = (2 << GPIO_PORT_SHIFT | 10),
+    PTC11 = (2 << GPIO_PORT_SHIFT | 11),
+    PTC12 = (2 << GPIO_PORT_SHIFT | 12),
+    PTC13 = (2 << GPIO_PORT_SHIFT | 13),
+    PTC14 = (2 << GPIO_PORT_SHIFT | 14),
+    PTC15 = (2 << GPIO_PORT_SHIFT | 15),
+    PTC16 = (2 << GPIO_PORT_SHIFT | 16),
+    PTC17 = (2 << GPIO_PORT_SHIFT | 17),
+    PTC18 = (2 << GPIO_PORT_SHIFT | 18),
+    PTC19 = (2 << GPIO_PORT_SHIFT | 19),
+    PTC20 = (2 << GPIO_PORT_SHIFT | 20),
+    PTC21 = (2 << GPIO_PORT_SHIFT | 21),
+    PTC22 = (2 << GPIO_PORT_SHIFT | 22),
+    PTC23 = (2 << GPIO_PORT_SHIFT | 23),
+    PTC24 = (2 << GPIO_PORT_SHIFT | 24),
+    PTC25 = (2 << GPIO_PORT_SHIFT | 25),
+    PTC26 = (2 << GPIO_PORT_SHIFT | 26),
+    PTC27 = (2 << GPIO_PORT_SHIFT | 27),
+    PTC28 = (2 << GPIO_PORT_SHIFT | 28),
+    PTC29 = (2 << GPIO_PORT_SHIFT | 29),
+    PTC30 = (2 << GPIO_PORT_SHIFT | 30),
+    PTC31 = (2 << GPIO_PORT_SHIFT | 31),
+    PTD0  = (3 << GPIO_PORT_SHIFT | 0 ),
+    PTD1  = (3 << GPIO_PORT_SHIFT | 1 ),
+    PTD2  = (3 << GPIO_PORT_SHIFT | 2 ),
+    PTD3  = (3 << GPIO_PORT_SHIFT | 3 ),
+    PTD4  = (3 << GPIO_PORT_SHIFT | 4 ),
+    PTD5  = (3 << GPIO_PORT_SHIFT | 5 ),
+    PTD6  = (3 << GPIO_PORT_SHIFT | 6 ),
+    PTD7  = (3 << GPIO_PORT_SHIFT | 7 ),
+    PTD8  = (3 << GPIO_PORT_SHIFT | 8 ),
+    PTD9  = (3 << GPIO_PORT_SHIFT | 9 ),
+    PTD10 = (3 << GPIO_PORT_SHIFT | 10),
+    PTD11 = (3 << GPIO_PORT_SHIFT | 11),
+    PTD12 = (3 << GPIO_PORT_SHIFT | 12),
+    PTD13 = (3 << GPIO_PORT_SHIFT | 13),
+    PTD14 = (3 << GPIO_PORT_SHIFT | 14),
+    PTD15 = (3 << GPIO_PORT_SHIFT | 15),
+    PTD16 = (3 << GPIO_PORT_SHIFT | 16),
+    PTD17 = (3 << GPIO_PORT_SHIFT | 17),
+    PTD18 = (3 << GPIO_PORT_SHIFT | 18),
+    PTD19 = (3 << GPIO_PORT_SHIFT | 19),
+    PTD20 = (3 << GPIO_PORT_SHIFT | 20),
+    PTD21 = (3 << GPIO_PORT_SHIFT | 21),
+    PTD22 = (3 << GPIO_PORT_SHIFT | 22),
+    PTD23 = (3 << GPIO_PORT_SHIFT | 23),
+    PTD24 = (3 << GPIO_PORT_SHIFT | 24),
+    PTD25 = (3 << GPIO_PORT_SHIFT | 25),
+    PTD26 = (3 << GPIO_PORT_SHIFT | 26),
+    PTD27 = (3 << GPIO_PORT_SHIFT | 27),
+    PTD28 = (3 << GPIO_PORT_SHIFT | 28),
+    PTD29 = (3 << GPIO_PORT_SHIFT | 29),
+    PTD30 = (3 << GPIO_PORT_SHIFT | 30),
+    PTD31 = (3 << GPIO_PORT_SHIFT | 31),
+    PTE0  = (4 << GPIO_PORT_SHIFT | 0 ),
+    PTE1  = (4 << GPIO_PORT_SHIFT | 1 ),
+    PTE2  = (4 << GPIO_PORT_SHIFT | 2 ),
+    PTE3  = (4 << GPIO_PORT_SHIFT | 3 ),
+    PTE4  = (4 << GPIO_PORT_SHIFT | 4 ),
+    PTE5  = (4 << GPIO_PORT_SHIFT | 5 ),
+    PTE6  = (4 << GPIO_PORT_SHIFT | 6 ),
+    PTE7  = (4 << GPIO_PORT_SHIFT | 7 ),
+    PTE8  = (4 << GPIO_PORT_SHIFT | 8 ),
+    PTE9  = (4 << GPIO_PORT_SHIFT | 9 ),
+    PTE10 = (4 << GPIO_PORT_SHIFT | 10),
+    PTE11 = (4 << GPIO_PORT_SHIFT | 11),
+    PTE12 = (4 << GPIO_PORT_SHIFT | 12),
+    PTE13 = (4 << GPIO_PORT_SHIFT | 13),
+    PTE14 = (4 << GPIO_PORT_SHIFT | 14),
+    PTE15 = (4 << GPIO_PORT_SHIFT | 15),
+    PTE16 = (4 << GPIO_PORT_SHIFT | 16),
+    PTE17 = (4 << GPIO_PORT_SHIFT | 17),
+    PTE18 = (4 << GPIO_PORT_SHIFT | 18),
+    PTE19 = (4 << GPIO_PORT_SHIFT | 19),
+    PTE20 = (4 << GPIO_PORT_SHIFT | 20),
+    PTE21 = (4 << GPIO_PORT_SHIFT | 21),
+    PTE22 = (4 << GPIO_PORT_SHIFT | 22),
+    PTE23 = (4 << GPIO_PORT_SHIFT | 23),
+    PTE24 = (4 << GPIO_PORT_SHIFT | 24),
+    PTE25 = (4 << GPIO_PORT_SHIFT | 25),
+    PTE26 = (4 << GPIO_PORT_SHIFT | 26),
+    PTE27 = (4 << GPIO_PORT_SHIFT | 27),
+    PTE28 = (4 << GPIO_PORT_SHIFT | 28),
+    PTE29 = (4 << GPIO_PORT_SHIFT | 29),
+    PTE30 = (4 << GPIO_PORT_SHIFT | 30),
+    PTE31 = (4 << GPIO_PORT_SHIFT | 31),
+
+    LED_RED   = PTC9,
+    LED_GREEN = PTE6,
+    LED_BLUE  = PTA11,
+
+    // mbed original LED naming
+    LED1 = LED_RED,
+    LED2 = LED_GREEN,
+    LED3 = LED_BLUE,
+    LED4 = LED_RED,
+
+    //Push buttons
+    SW2 = PTD11,
+    SW3 = PTA10,
+    // Standardized button names
+    BUTTON1 = SW2,
+    BUTTON2 = SW3,
+
+    // USB Pins
+    USBTX = PTB17,
+    USBRX = PTB16,
+
+    // Arduino Headers
+    D0 = PTC3,
+    D1 = PTC4,
+    D2 = PTC16,
+    D3 = PTC8,
+    D4 = PTC12,
+    D5 = PTC5,
+    D6 = PTC2,
+    D7 = PTA25,
+    D8 = PTB18,
+    D9 = PTB19,
+    D10 = PTD0,
+    D11 = PTD2,
+    D12 = PTD3,
+    D13 = PTD1,
+    D14 = PTC11,
+    D15 = PTC10,
+
+    I2C_SCL = D15,
+    I2C_SDA = D14,
+
+    A0 = PTB7,
+    A1 = PTB6,
+    A2 = PTB5,
+    A3 = PTB4,
+    A4 = PTB3,
+    A5 = PTB2,
+
+    DAC0_OUT = 0xFEFE, /* DAC does not have Pin Name in RM */
+
+    // Not connected
+    NC = (int)0xFFFFFFFF
+} PinName;
+
+
+typedef enum {
+    PullNone = 0,
+    PullDown = 1,
+    PullUp   = 2,
+    PullDefault = PullUp
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif