Diff: TARGET_K64F/TOOLCHAIN_IAR/fsl_cmt.h

Revision:

171:3a7713b1edbc

Parent:

145:64910690c574

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_K64F/TOOLCHAIN_IAR/fsl_cmt.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,401 @@
+/*
+ * Copyright (c) 2015, Freescale Semiconductor, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * o Redistributions of source code must retain the above copyright notice, this list
+ *   of conditions and the following disclaimer.
+ *
+ * o Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ *
+ * o Neither the name of Freescale Semiconductor, Inc. nor the names of its
+ *   contributors may be used to endorse or promote products derived from this
+ *   software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _FSL_CMT_H_
+#define _FSL_CMT_H_
+
+#include "fsl_common.h"
+
+/*!
+ * @addtogroup cmt
+ * @{
+ */
+
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*! @name Driver version */
+/*@{*/
+/*! @brief CMT driver version 2.0.1. */
+#define FSL_CMT_DRIVER_VERSION (MAKE_VERSION(2, 0, 1))
+/*@}*/
+
+/*!
+ * @brief The modes of CMT.
+ */
+typedef enum _cmt_mode
+{
+    kCMT_DirectIROCtl = 0x00U, /*!< Carrier modulator is disabled and the IRO signal is directly in software control */
+    kCMT_TimeMode = 0x01U,     /*!< Carrier modulator is enabled in time mode. */
+    kCMT_FSKMode = 0x05U,      /*!< Carrier modulator is enabled in FSK mode. */
+    kCMT_BasebandMode = 0x09U  /*!< Carrier modulator is enabled in baseband mode. */
+} cmt_mode_t;
+
+/*!
+ * @brief The CMT clock divide primary prescaler.
+ * The primary clock divider is used to divider the bus clock to
+ * get the intermediate frequency to approximately equal to 8 MHZ.
+ * When the bus clock is 8 MHZ, set primary prescaler to "kCMT_PrimaryClkDiv1".
+ */
+typedef enum _cmt_primary_clkdiv
+{
+    kCMT_PrimaryClkDiv1 = 0U,   /*!< The intermediate frequency is the bus clock divided by 1. */
+    kCMT_PrimaryClkDiv2 = 1U,   /*!< The intermediate frequency is the bus clock divided by 2. */
+    kCMT_PrimaryClkDiv3 = 2U,   /*!< The intermediate frequency is the bus clock divided by 3. */
+    kCMT_PrimaryClkDiv4 = 3U,   /*!< The intermediate frequency is the bus clock divided by 4. */
+    kCMT_PrimaryClkDiv5 = 4U,   /*!< The intermediate frequency is the bus clock divided by 5. */
+    kCMT_PrimaryClkDiv6 = 5U,   /*!< The intermediate frequency is the bus clock divided by 6. */
+    kCMT_PrimaryClkDiv7 = 6U,   /*!< The intermediate frequency is the bus clock divided by 7. */
+    kCMT_PrimaryClkDiv8 = 7U,   /*!< The intermediate frequency is the bus clock divided by 8. */
+    kCMT_PrimaryClkDiv9 = 8U,   /*!< The intermediate frequency is the bus clock divided by 9. */
+    kCMT_PrimaryClkDiv10 = 9U,  /*!< The intermediate frequency is the bus clock divided by 10. */
+    kCMT_PrimaryClkDiv11 = 10U, /*!< The intermediate frequency is the bus clock divided by 11. */
+    kCMT_PrimaryClkDiv12 = 11U, /*!< The intermediate frequency is the bus clock divided by 12. */
+    kCMT_PrimaryClkDiv13 = 12U, /*!< The intermediate frequency is the bus clock divided by 13. */
+    kCMT_PrimaryClkDiv14 = 13U, /*!< The intermediate frequency is the bus clock divided by 14. */
+    kCMT_PrimaryClkDiv15 = 14U, /*!< The intermediate frequency is the bus clock divided by 15. */
+    kCMT_PrimaryClkDiv16 = 15U  /*!< The intermediate frequency is the bus clock divided by 16. */
+} cmt_primary_clkdiv_t;
+
+/*!
+ * @brief The CMT clock divide secondary prescaler.
+ * The second prescaler can be used to divide the 8 MHZ CMT clock
+ * by 1, 2, 4, or 8 according to the specification.
+ */
+typedef enum _cmt_second_clkdiv
+{
+    kCMT_SecondClkDiv1 = 0U, /*!< The CMT clock is the intermediate frequency frequency divided by 1. */
+    kCMT_SecondClkDiv2 = 1U, /*!< The CMT clock is the intermediate frequency frequency divided by 2. */
+    kCMT_SecondClkDiv4 = 2U, /*!< The CMT clock is the intermediate frequency frequency divided by 4. */
+    kCMT_SecondClkDiv8 = 3U  /*!< The CMT clock is the intermediate frequency frequency divided by 8. */
+} cmt_second_clkdiv_t;
+
+/*!
+ * @brief The CMT infrared output polarity.
+ */
+typedef enum _cmt_infrared_output_polarity
+{
+    kCMT_IROActiveLow = 0U, /*!< The CMT infrared output signal polarity is active-low. */
+    kCMT_IROActiveHigh = 1U /*!< The CMT infrared output signal polarity is active-high. */
+} cmt_infrared_output_polarity_t;
+
+/*!
+ * @brief The CMT infrared output signal state control.
+ */
+typedef enum _cmt_infrared_output_state
+{
+    kCMT_IROCtlLow = 0U, /*!< The CMT Infrared output signal state is controlled to low. */
+    kCMT_IROCtlHigh = 1U /*!< The CMT Infrared output signal state is controlled to high. */
+} cmt_infrared_output_state_t;
+
+/*!
+ * @brief CMT interrupt configuration structure, default settings all disabled.
+ *
+ * This structure contains the settings for all of the CMT interrupt configurations.
+ */
+enum _cmt_interrupt_enable
+{
+    kCMT_EndOfCycleInterruptEnable = CMT_MSC_EOCIE_MASK, /*!< CMT end of cycle interrupt. */
+};
+
+/*!
+ * @brief CMT carrier generator and modulator configuration structure
+ *
+ */
+typedef struct _cmt_modulate_config
+{
+    uint8_t highCount1;  /*!< The high-time for carrier generator first register. */
+    uint8_t lowCount1;   /*!< The low-time for carrier generator first register. */
+    uint8_t highCount2;  /*!< The high-time for carrier generator second register for FSK mode. */
+    uint8_t lowCount2;   /*!< The low-time for carrier generator second register for FSK mode. */
+    uint16_t markCount;  /*!< The mark time for the modulator gate. */
+    uint16_t spaceCount; /*!< The space time for the modulator gate. */
+} cmt_modulate_config_t;
+
+/*! @brief CMT basic configuration structure. */
+typedef struct _cmt_config
+{
+    bool isInterruptEnabled;                    /*!< Timer interrupt 0-disable, 1-enable. */
+    bool isIroEnabled;                          /*!< The IRO output 0-disabled, 1-enabled. */
+    cmt_infrared_output_polarity_t iroPolarity; /*!< The IRO polarity. */
+    cmt_second_clkdiv_t divider;                /*!< The CMT clock divide prescaler. */
+} cmt_config_t;
+
+/*******************************************************************************
+ * API
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*!
+ * @name Initialization and deinitialization
+ * @{
+ */
+
+/*!
+ * @brief Gets the CMT default configuration structure. This API
+ * gets the default configuration structure for the CMT_Init().
+ * Use the initialized structure unchanged in CMT_Init() or modify
+ * fields of the structure before calling the CMT_Init().
+ *
+ * @param config The CMT configuration structure pointer.
+ */
+void CMT_GetDefaultConfig(cmt_config_t *config);
+
+/*!
+ * @brief Initializes the CMT module.
+ *
+ * This function ungates the module clock and sets the CMT internal clock,
+ * interrupt, and infrared output signal for the CMT module.
+ *
+ * @param base            CMT peripheral base address.
+ * @param config          The CMT basic configuration structure.
+ * @param busClock_Hz     The CMT module input clock - bus clock frequency.
+ */
+void CMT_Init(CMT_Type *base, const cmt_config_t *config, uint32_t busClock_Hz);
+
+/*!
+ * @brief Disables the CMT module and gate control.
+ *
+ * This function disables CMT modulator, interrupts, and gates the
+ * CMT clock control. CMT_Init must be called  to use the CMT again.
+ *
+ * @param base   CMT peripheral base address.
+ */
+void CMT_Deinit(CMT_Type *base);
+
+/*! @}*/
+
+/*!
+ * @name Basic Control Operations
+ * @{
+ */
+
+/*!
+ * @brief Selects the mode for CMT.
+ *
+ * @param base   CMT peripheral base address.
+ * @param mode   The CMT feature mode enumeration. See "cmt_mode_t".
+ * @param modulateConfig  The carrier generation and modulator configuration.
+ */
+void CMT_SetMode(CMT_Type *base, cmt_mode_t mode, cmt_modulate_config_t *modulateConfig);
+
+/*!
+ * @brief Gets the mode of the CMT module.
+ *
+ * @param base   CMT peripheral base address.
+ * @return The CMT mode.
+ *     kCMT_DirectIROCtl     Carrier modulator is disabled; the IRO signal is directly in software control.
+ *     kCMT_TimeMode         Carrier modulator is enabled in time mode.
+ *     kCMT_FSKMode          Carrier modulator is enabled in FSK mode.
+ *     kCMT_BasebandMode     Carrier modulator is enabled in baseband mode.
+ */
+cmt_mode_t CMT_GetMode(CMT_Type *base);
+
+/*!
+ * @brief Gets the actual CMT clock frequency.
+ *
+ * @param base        CMT peripheral base address.
+ * @param busClock_Hz CMT module input clock - bus clock frequency.
+ * @return The CMT clock frequency.
+ */
+uint32_t CMT_GetCMTFrequency(CMT_Type *base, uint32_t busClock_Hz);
+
+/*!
+ * @brief Sets the primary data set for the CMT carrier generator counter.
+ *
+ * This function sets the high-time and low-time of the primary data set for the
+ * CMT carrier generator counter to control the period and the duty cycle of the
+ * output carrier signal.
+ * If the CMT clock period is Tcmt, the period of the carrier generator signal equals
+ * (highCount + lowCount) * Tcmt. The duty cycle equals to highCount / (highCount + lowCount).
+ *
+ * @param base      CMT peripheral base address.
+ * @param highCount The number of CMT clocks for carrier generator signal high time,
+ *                  integer in the range of 1 ~ 0xFF.
+ * @param lowCount  The number of CMT clocks for carrier generator signal low time,
+ *                  integer in the range of 1 ~ 0xFF.
+ */
+static inline void CMT_SetCarrirGenerateCountOne(CMT_Type *base, uint32_t highCount, uint32_t lowCount)
+{
+    assert(highCount <= CMT_CGH1_PH_MASK);
+    assert(highCount);
+    assert(lowCount <= CMT_CGL1_PL_MASK);
+    assert(lowCount);
+
+    base->CGH1 = highCount;
+    base->CGL1 = lowCount;
+}
+
+/*!
+ * @brief Sets the secondary data set for the CMT carrier generator counter.
+ *
+ * This function is used for FSK mode setting the high-time and low-time of the secondary
+ * data set CMT carrier generator counter to control the period and the duty cycle
+ * of the output carrier signal.
+ * If the CMT clock period is Tcmt, the period of the carrier generator signal equals
+ * (highCount + lowCount) * Tcmt. The duty cycle equals  highCount / (highCount + lowCount).
+ *
+ * @param base      CMT peripheral base address.
+ * @param highCount The number of CMT clocks for carrier generator signal high time,
+ *                  integer in the range of 1 ~ 0xFF.
+ * @param lowCount  The number of CMT clocks for carrier generator signal low time,
+ *                  integer in the range of 1 ~ 0xFF.
+ */
+static inline void CMT_SetCarrirGenerateCountTwo(CMT_Type *base, uint32_t highCount, uint32_t lowCount)
+{
+    assert(highCount <= CMT_CGH2_SH_MASK);
+    assert(highCount);
+    assert(lowCount <= CMT_CGL2_SL_MASK);
+    assert(lowCount);
+
+    base->CGH2 = highCount;
+    base->CGL2 = lowCount;
+}
+
+/*!
+ * @brief Sets the modulation mark and space time period for the CMT modulator.
+ *
+ * This function sets the mark time period of the CMT modulator counter
+ * to control the mark time of the output modulated signal from the carrier generator output signal.
+ * If the CMT clock frequency is Fcmt and the carrier out signal frequency is fcg:
+ *      - In Time and Baseband mode: The mark period of the generated signal equals (markCount + 1) / (Fcmt/8).
+ *                                   The space period of the generated signal equals spaceCount / (Fcmt/8).
+ *      - In FSK mode: The mark period of the generated signal equals (markCount + 1)/fcg.
+ *                     The space period of the generated signal equals spaceCount / fcg.
+ *
+ * @param base Base address for current CMT instance.
+ * @param markCount The number of clock period for CMT modulator signal mark period,
+ *                   in the range of 0 ~ 0xFFFF.
+ * @param spaceCount The number of clock period for CMT modulator signal space period,
+ *                   in the range of the 0 ~ 0xFFFF.
+ */
+void CMT_SetModulateMarkSpace(CMT_Type *base, uint32_t markCount, uint32_t spaceCount);
+
+/*!
+ * @brief Enables or disables the extended space operation.
+ *
+ * This function is used to make the space period longer
+ * for time, baseband, and FSK modes.
+ *
+ * @param base   CMT peripheral base address.
+ * @param enable True enable the extended space, false disable the extended space.
+ */
+static inline void CMT_EnableExtendedSpace(CMT_Type *base, bool enable)
+{
+    if (enable)
+    {
+        base->MSC |= CMT_MSC_EXSPC_MASK;
+    }
+    else
+    {
+        base->MSC &= ~CMT_MSC_EXSPC_MASK;
+    }
+}
+
+/*!
+ * @brief Sets the IRO (infrared output) signal state.
+ *
+ * Changes the states of the IRO signal when the kCMT_DirectIROMode mode is set
+ * and the IRO signal is enabled.
+ *
+ * @param base   CMT peripheral base address.
+ * @param state  The control of the IRO signal. See "cmt_infrared_output_state_t"
+ */
+void CMT_SetIroState(CMT_Type *base, cmt_infrared_output_state_t state);
+
+/*!
+ * @brief Enables the CMT interrupt.
+ *
+ * This function enables the CMT interrupts according to the provided mask if enabled.
+ * The CMT only has the end of the cycle interrupt - an interrupt occurs at the end
+ * of the modulator cycle. This interrupt provides a means for the user
+ * to reload the new mark/space values into the CMT modulator data registers
+ * and verify the modulator mark and space.
+ * For example, to enable the end of cycle, do the following.
+ * @code
+ *     CMT_EnableInterrupts(CMT, kCMT_EndOfCycleInterruptEnable);
+ * @endcode
+ * @param base   CMT peripheral base address.
+ * @param mask The interrupts to enable. Logical OR of @ref _cmt_interrupt_enable.
+ */
+static inline void CMT_EnableInterrupts(CMT_Type *base, uint32_t mask)
+{
+    base->MSC |= mask;
+}
+
+/*!
+ * @brief Disables the CMT interrupt.
+ *
+ * This function disables the CMT interrupts according to the provided maskIf enabled.
+ * The CMT only has the end of the cycle interrupt.
+ * For example, to disable the end of cycle, do the following.
+ * @code
+ *     CMT_DisableInterrupts(CMT, kCMT_EndOfCycleInterruptEnable);
+ * @endcode
+ *
+ * @param base   CMT peripheral base address.
+ * @param mask The interrupts to enable. Logical OR of @ref _cmt_interrupt_enable.
+ */
+static inline void CMT_DisableInterrupts(CMT_Type *base, uint32_t mask)
+{
+    base->MSC &= ~mask;
+}
+
+/*!
+ * @brief Gets the end of the cycle status flag.
+ *
+ * The flag is set:
+ *           - When the modulator is not currently active and carrier and modulator
+ *             are set to start the initial CMT transmission.
+ *           - At the end of each modulation cycle when the counter is reloaded and
+ *             the carrier and modulator are enabled.
+ * @param base   CMT peripheral base address.
+ * @return Current status of the end of cycle status flag
+ *         @arg non-zero:  End-of-cycle has occurred.
+ *         @arg zero: End-of-cycle has not yet occurred since the flag last cleared.
+ */
+static inline uint32_t CMT_GetStatusFlags(CMT_Type *base)
+{
+    return base->MSC & CMT_MSC_EOCF_MASK;
+}
+
+/*! @}*/
+
+#if defined(__cplusplus)
+}
+#endif
+
+/*! @}*/
+
+#endif /* _FSL_CMT_H_*/