Diff: TARGET_K64F/TOOLCHAIN_IAR/fsl_cmp.h

Revision:

171:3a7713b1edbc

Parent:

145:64910690c574

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_K64F/TOOLCHAIN_IAR/fsl_cmp.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,343 @@
+/*
+ * Copyright (c) 2015, Freescale Semiconductor, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * o Redistributions of source code must retain the above copyright notice, this list
+ *   of conditions and the following disclaimer.
+ *
+ * o Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ *
+ * o Neither the name of Freescale Semiconductor, Inc. nor the names of its
+ *   contributors may be used to endorse or promote products derived from this
+ *   software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _FSL_CMP_H_
+#define _FSL_CMP_H_
+
+#include "fsl_common.h"
+
+/*!
+ * @addtogroup cmp
+ * @{
+ */
+
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*! @name Driver version */
+/*@{*/
+/*! @brief CMP driver version 2.0.0. */
+#define FSL_CMP_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
+/*@}*/
+
+/*!
+* @brief Interrupt enable/disable mask.
+*/
+enum _cmp_interrupt_enable
+{
+    kCMP_OutputRisingInterruptEnable = CMP_SCR_IER_MASK,  /*!< Comparator interrupt enable rising. */
+    kCMP_OutputFallingInterruptEnable = CMP_SCR_IEF_MASK, /*!< Comparator interrupt enable falling. */
+};
+
+/*!
+ * @brief Status flags' mask.
+ */
+enum _cmp_status_flags
+{
+    kCMP_OutputRisingEventFlag = CMP_SCR_CFR_MASK,  /*!< Rising-edge on the comparison output has occurred. */
+    kCMP_OutputFallingEventFlag = CMP_SCR_CFF_MASK, /*!< Falling-edge on the comparison output has occurred. */
+    kCMP_OutputAssertEventFlag = CMP_SCR_COUT_MASK, /*!< Return the current value of the analog comparator output. */
+};
+
+/*!
+ * @brief CMP Hysteresis mode.
+ */
+typedef enum _cmp_hysteresis_mode
+{
+    kCMP_HysteresisLevel0 = 0U, /*!< Hysteresis level 0. */
+    kCMP_HysteresisLevel1 = 1U, /*!< Hysteresis level 1. */
+    kCMP_HysteresisLevel2 = 2U, /*!< Hysteresis level 2. */
+    kCMP_HysteresisLevel3 = 3U, /*!< Hysteresis level 3. */
+} cmp_hysteresis_mode_t;
+
+/*!
+ * @brief CMP Voltage Reference source.
+ */
+typedef enum _cmp_reference_voltage_source
+{
+    kCMP_VrefSourceVin1 = 0U, /*!< Vin1 is selected as a resistor ladder network supply reference Vin. */
+    kCMP_VrefSourceVin2 = 1U, /*!< Vin2 is selected as a resistor ladder network supply reference Vin. */
+} cmp_reference_voltage_source_t;
+
+/*!
+ * @brief Configures the comparator.
+ */
+typedef struct _cmp_config
+{
+    bool enableCmp;                       /*!< Enable the CMP module. */
+    cmp_hysteresis_mode_t hysteresisMode; /*!< CMP Hysteresis mode. */
+    bool enableHighSpeed;                 /*!< Enable High-speed (HS) comparison mode. */
+    bool enableInvertOutput;              /*!< Enable the inverted comparator output. */
+    bool useUnfilteredOutput;             /*!< Set the compare output(COUT) to equal COUTA(true) or COUT(false). */
+    bool enablePinOut;                    /*!< The comparator output is available on the associated pin. */
+#if defined(FSL_FEATURE_CMP_HAS_TRIGGER_MODE) && FSL_FEATURE_CMP_HAS_TRIGGER_MODE
+    bool enableTriggerMode; /*!< Enable the trigger mode. */
+#endif                      /* FSL_FEATURE_CMP_HAS_TRIGGER_MODE */
+} cmp_config_t;
+
+/*!
+ * @brief Configures the filter.
+ */
+typedef struct _cmp_filter_config
+{
+#if defined(FSL_FEATURE_CMP_HAS_EXTERNAL_SAMPLE_SUPPORT) && FSL_FEATURE_CMP_HAS_EXTERNAL_SAMPLE_SUPPORT
+    bool enableSample;    /*!< Using the external SAMPLE as a sampling clock input or using a divided bus clock. */
+#endif                    /* FSL_FEATURE_CMP_HAS_EXTERNAL_SAMPLE_SUPPORT */
+    uint8_t filterCount;  /*!< Filter Sample Count. Available range is 1-7; 0 disables the filter.*/
+    uint8_t filterPeriod; /*!< Filter Sample Period. The divider to the bus clock. Available range is 0-255. */
+} cmp_filter_config_t;
+
+/*!
+ * @brief Configures the internal DAC.
+ */
+typedef struct _cmp_dac_config
+{
+    cmp_reference_voltage_source_t referenceVoltageSource; /*!< Supply voltage reference source. */
+    uint8_t DACValue;                                      /*!< Value for the DAC Output Voltage. Available range is 0-63.*/
+} cmp_dac_config_t;
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*******************************************************************************
+ * API
+ ******************************************************************************/
+
+/*!
+ * @name Initialization
+ * @{
+ */
+
+/*!
+ * @brief Initializes the CMP.
+ *
+ * This function initializes the CMP module. The operations included are as follows.
+ * - Enabling the clock for CMP module.
+ * - Configuring the comparator.
+ * - Enabling the CMP module.
+ * Note that for some devices, multiple CMP instances share the same clock gate. In this case, to enable the clock for
+ * any instance enables all CMPs. See the appropriate MCU reference manual for the clock assignment of the CMP.
+ *
+ * @param base   CMP peripheral base address.
+ * @param config Pointer to the configuration structure.
+ */
+void CMP_Init(CMP_Type *base, const cmp_config_t *config);
+
+/*!
+ * @brief De-initializes the CMP module.
+ *
+ * This function de-initializes the CMP module. The operations included are as follows.
+ * - Disabling the CMP module.
+ * - Disabling the clock for CMP module.
+ *
+ * This function disables the clock for the CMP.
+ * Note that for some devices, multiple CMP instances share the same clock gate. In this case, before disabling the
+ * clock for the CMP, ensure that all the CMP instances are not used.
+ *
+ * @param base CMP peripheral base address.
+ */
+void CMP_Deinit(CMP_Type *base);
+
+/*!
+ * @brief Enables/disables the CMP module.
+ *
+ * @param base CMP peripheral base address.
+ * @param enable Enables or disables the module.
+ */
+static inline void CMP_Enable(CMP_Type *base, bool enable)
+{
+    if (enable)
+    {
+        base->CR1 |= CMP_CR1_EN_MASK;
+    }
+    else
+    {
+        base->CR1 &= ~CMP_CR1_EN_MASK;
+    }
+}
+
+/*!
+* @brief Initializes the CMP user configuration structure.
+*
+* This function initializes the user configuration structure to these default values.
+* @code
+*   config->enableCmp           = true;
+*   config->hysteresisMode      = kCMP_HysteresisLevel0;
+*   config->enableHighSpeed     = false;
+*   config->enableInvertOutput  = false;
+*   config->useUnfilteredOutput = false;
+*   config->enablePinOut        = false;
+*   config->enableTriggerMode   = false;
+* @endcode
+* @param config Pointer to the configuration structure.
+*/
+void CMP_GetDefaultConfig(cmp_config_t *config);
+
+/*!
+ * @brief  Sets the input channels for the comparator.
+ *
+ * This function sets the input channels for the comparator.
+ * Note that two input channels cannot be set the same way in the application. When the user selects the same input
+ * from the analog mux to the positive and negative port, the comparator is disabled automatically.
+ *
+ * @param  base            CMP peripheral base address.
+ * @param  positiveChannel Positive side input channel number. Available range is 0-7.
+ * @param  negativeChannel Negative side input channel number. Available range is 0-7.
+ */
+void CMP_SetInputChannels(CMP_Type *base, uint8_t positiveChannel, uint8_t negativeChannel);
+
+/* @} */
+
+/*!
+ * @name Advanced Features
+ * @{
+ */
+
+#if defined(FSL_FEATURE_CMP_HAS_DMA) && FSL_FEATURE_CMP_HAS_DMA
+/*!
+ * @brief Enables/disables the DMA request for rising/falling events.
+ *
+ * This function enables/disables the DMA request for rising/falling events. Either event triggers the generation of
+ * the DMA request from CMP if the DMA feature is enabled. Both events are ignored for generating the DMA request from the CMP
+ * if the DMA is disabled.
+ *
+ * @param base CMP peripheral base address.
+ * @param enable Enables or disables the feature.
+ */
+void CMP_EnableDMA(CMP_Type *base, bool enable);
+#endif /* FSL_FEATURE_CMP_HAS_DMA */
+
+#if defined(FSL_FEATURE_CMP_HAS_WINDOW_MODE) && FSL_FEATURE_CMP_HAS_WINDOW_MODE
+/*!
+ * @brief Enables/disables the window mode.
+ *
+ * @param base CMP peripheral base address.
+ * @param enable Enables or disables the feature.
+ */
+static inline void CMP_EnableWindowMode(CMP_Type *base, bool enable)
+{
+    if (enable)
+    {
+        base->CR1 |= CMP_CR1_WE_MASK;
+    }
+    else
+    {
+        base->CR1 &= ~CMP_CR1_WE_MASK;
+    }
+}
+#endif /* FSL_FEATURE_CMP_HAS_WINDOW_MODE */
+
+#if defined(FSL_FEATURE_CMP_HAS_PASS_THROUGH_MODE) && FSL_FEATURE_CMP_HAS_PASS_THROUGH_MODE
+/*!
+ * @brief Enables/disables the pass through mode.
+ *
+ * @param base CMP peripheral base address.
+ * @param enable Enables or disables the feature.
+ */
+static inline void CMP_EnablePassThroughMode(CMP_Type *base, bool enable)
+{
+    if (enable)
+    {
+        base->MUXCR |= CMP_MUXCR_PSTM_MASK;
+    }
+    else
+    {
+        base->MUXCR &= ~CMP_MUXCR_PSTM_MASK;
+    }
+}
+#endif /* FSL_FEATURE_CMP_HAS_PASS_THROUGH_MODE */
+
+/*!
+ * @brief  Configures the filter.
+ *
+ * @param  base   CMP peripheral base address.
+ * @param  config Pointer to the configuration structure.
+ */
+void CMP_SetFilterConfig(CMP_Type *base, const cmp_filter_config_t *config);
+
+/*!
+ * @brief Configures the internal DAC.
+ *
+ * @param base   CMP peripheral base address.
+ * @param config Pointer to the configuration structure. "NULL" disables the feature.
+ */
+void CMP_SetDACConfig(CMP_Type *base, const cmp_dac_config_t *config);
+
+/*!
+ * @brief Enables the interrupts.
+ *
+ * @param base    CMP peripheral base address.
+ * @param mask    Mask value for interrupts. See "_cmp_interrupt_enable".
+ */
+void CMP_EnableInterrupts(CMP_Type *base, uint32_t mask);
+
+/*!
+ * @brief Disables the interrupts.
+ *
+ * @param base    CMP peripheral base address.
+ * @param mask    Mask value for interrupts. See "_cmp_interrupt_enable".
+ */
+void CMP_DisableInterrupts(CMP_Type *base, uint32_t mask);
+
+/* @} */
+
+/*!
+ * @name Results
+ * @{
+ */
+
+/*!
+ * @brief  Gets the status flags.
+ *
+ * @param  base     CMP peripheral base address.
+ *
+ * @return          Mask value for the asserted flags. See "_cmp_status_flags".
+ */
+uint32_t CMP_GetStatusFlags(CMP_Type *base);
+
+/*!
+ * @brief Clears the status flags.
+ *
+ * @param base     CMP peripheral base address.
+ * @param mask     Mask value for the flags. See "_cmp_status_flags".
+ */
+void CMP_ClearStatusFlags(CMP_Type *base, uint32_t mask);
+
+/* @} */
+#if defined(__cplusplus)
+}
+#endif
+/*!
+ * @}
+ */
+#endif /* _FSL_CMP_H_ */