The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
Diff: TARGET_EFM32PG_STK3401/TOOLCHAIN_IAR/objects.h
- Revision:
- 171:3a7713b1edbc
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_EFM32PG_STK3401/TOOLCHAIN_IAR/objects.h Thu Nov 08 11:45:42 2018 +0000 @@ -0,0 +1,173 @@ +/***************************************************************************//** + * @file objects.h + ******************************************************************************* + * @section License + * <b>(C) Copyright 2015 Silicon Labs, http://www.silabs.com</b> + ******************************************************************************* + * + * SPDX-License-Identifier: Apache-2.0 + * + * Licensed under the Apache License, Version 2.0 (the "License"); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + * + ******************************************************************************/ + +#ifndef MBED_OBJECTS_H +#define MBED_OBJECTS_H + +#include "PinNames.h" +#include "PeripheralNames.h" +#include "PortNames.h" +#include "em_i2c.h" +#include "em_dma.h" +#include "em_cmu.h" +#include "dma_api_HAL.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef struct { + PinName pin; + PinMode mode; + PinDirection dir; +} gpio_t; + +#if DEVICE_ANALOGIN +struct analogin_s { + ADC_TypeDef *adc; + uint32_t channel; +}; +#endif + +#if DEVICE_ANALOGOUT +struct dac_s { + DAC_TypeDef *dac; + uint32_t channel; +}; +#endif + +#if DEVICE_I2C +struct i2c_s { + I2C_TypeDef *i2c; + uint32_t location; +#if DEVICE_I2C_ASYNCH + uint32_t events; + I2C_TransferSeq_TypeDef xfer; +#endif +}; +#endif + +#if DEVICE_PORTOUT +struct port_s { + PortName port; + uint32_t mask; + PinDirection dir; +}; +#endif + +#if DEVICE_PWMOUT +struct pwmout_s { + //Channel on TIMER + uint32_t channel; + PinName pin; +}; +#endif + +#if DEVICE_INTERRUPTIN +struct gpio_irq_s { + PinName pin; + uint8_t risingEdge; + uint8_t fallingEdge; +}; +#endif + +#if DEVICE_SERIAL +struct serial_s { + union { + USART_TypeDef *uart; + LEUART_TypeDef *leuart; + } periph; +#ifndef _SILICON_LABS_32B_PLATFORM_2 + uint32_t location; +#else + uint32_t location_tx; + uint32_t location_rx; +#endif + PinName rx_pin; + PinName tx_pin; +#if DEVICE_SERIAL_ASYNCH + uint32_t events; + DMA_OPTIONS_t dmaOptionsTX; + DMA_OPTIONS_t dmaOptionsRX; +#endif + uint32_t sleep_blocked; +}; +#endif + +#if DEVICE_SPI +struct spi_s { + USART_TypeDef *spi; + uint32_t location; + uint32_t route; + uint8_t bits; + uint8_t master; +#if DEVICE_SPI_ASYNCH + uint32_t event; + DMA_OPTIONS_t dmaOptionsTX; + DMA_OPTIONS_t dmaOptionsRX; +#endif +}; +#endif + +#if DEVICE_RTC +struct lp_timer_s { + uint32_t start; + uint32_t stop; +}; +#endif + +#if DEVICE_FLASH +struct flash_s { + MSC_TypeDef *msc; +}; +#endif + +#if DEVICE_TRNG +struct trng_s { + TRNG_TypeDef *instance; +}; +#endif + +#if DEVICE_CAN +struct can_s { + CAN_TypeDef *instance; +}; +#endif + +#if DEVICE_QSPI +struct qspi_s { + QSPI_TypeDef *instance; + PinName io0; + PinName io1; + PinName io2; + PinName io3; + PinName sclk; + PinName ssel; +}; +#endif + +#ifdef __cplusplus +} +#endif + +#endif