Diff: TARGET_B96B_F446VE/TOOLCHAIN_IAR/PinNames.h

Revision:

171:3a7713b1edbc

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_B96B_F446VE/TOOLCHAIN_IAR/PinNames.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,222 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2014, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+#include "PinNamesTypes.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PA_0  = 0x00,
+    PA_1  = 0x01,
+    PA_2  = 0x02,
+    PA_3  = 0x03,
+    PA_4  = 0x04,
+    PA_5  = 0x05,
+    PA_6  = 0x06,
+    PA_7  = 0x07,
+    PA_8  = 0x08,
+    PA_9  = 0x09,
+    PA_10 = 0x0A,
+    PA_11 = 0x0B,
+    PA_12 = 0x0C,
+    PA_13 = 0x0D,
+    PA_14 = 0x0E,
+    PA_15 = 0x0F,
+
+    PB_0  = 0x10,
+    PB_1  = 0x11,
+    PB_2  = 0x12,
+    PB_3  = 0x13,
+    PB_4  = 0x14,
+    PB_5  = 0x15,
+    PB_6  = 0x16,
+    PB_7  = 0x17,
+    PB_8  = 0x18,
+    PB_9  = 0x19,
+    PB_10 = 0x1A,
+    PB_12 = 0x1C,
+    PB_13 = 0x1D,
+    PB_14 = 0x1E,
+    PB_15 = 0x1F,
+
+    PC_0  = 0x20,
+    PC_1  = 0x21,
+    PC_2  = 0x22,
+    PC_3  = 0x23,
+    PC_4  = 0x24,
+    PC_5  = 0x25,
+    PC_6  = 0x26,
+    PC_7  = 0x27,
+    PC_8  = 0x28,
+    PC_9  = 0x29,
+    PC_10 = 0x2A,
+    PC_11 = 0x2B,
+    PC_12 = 0x2C,
+    PC_13 = 0x2D,
+    PC_14 = 0x2E,
+    PC_15 = 0x2F,
+
+    PD_0  = 0x30,
+    PD_1  = 0x31,
+    PD_2  = 0x32,
+    PD_3  = 0x33,
+    PD_4  = 0x34,
+    PD_5  = 0x35,
+    PD_6  = 0x36,
+    PD_7  = 0x37,
+    PD_8  = 0x38,
+    PD_9  = 0x39,
+    PD_10 = 0x3A,
+    PD_11 = 0x3B,
+    PD_12 = 0x3C,
+    PD_13 = 0x3D,
+    PD_14 = 0x3E,
+    PD_15 = 0x3F,
+
+    PE_0  = 0x40,
+    PE_1  = 0x41,
+    PE_2  = 0x42,
+    PE_3  = 0x43,
+    PE_4  = 0x44,
+    PE_5  = 0x45,
+    PE_6  = 0x46,
+    PE_7  = 0x47,
+    PE_8  = 0x48,
+    PE_9  = 0x49,
+    PE_10 = 0x4A,
+    PE_11 = 0x4B,
+    PE_12 = 0x4C,
+    PE_13 = 0x4D,
+    PE_14 = 0x4E,
+    PE_15 = 0x4F,
+
+    PH_0  = 0x70,
+    PH_1  = 0x71,
+
+    // ADC internal channels
+    ADC_TEMP = 0xF0,
+    ADC_VREF = 0xF1,
+    ADC_VBAT = 0xF2,
+
+    // Arduino connector namings
+    A0          = PA_1,
+    A1          = PA_2,
+    A2          = PC_3,
+    A3          = PC_2,
+    A4          = PB_1,
+    A5          = PC_0,
+    D0          = PD_6,
+    D1          = PD_5,
+    D2          = PD_4,
+    D3          = PC_8,
+    D4          = PD_2,
+    D5          = PD_15,
+    D6          = PD_14,
+    D7          = PE_15,
+    D8          = PE_3,
+    D9          = PB_4,
+    D10         = PE_4,
+    D11         = PE_6,
+    D12         = PE_5,
+    D13         = PE_2,
+    D14         = PC_12,
+    D15         = PB_10,
+
+    // STDIO for console print
+#ifdef MBED_CONF_TARGET_STDIO_UART_TX
+    STDIO_UART_TX = MBED_CONF_TARGET_STDIO_UART_TX,
+#else
+    STDIO_UART_TX = PC_10,
+#endif
+#ifdef MBED_CONF_TARGET_STDIO_UART_RX
+    STDIO_UART_RX = MBED_CONF_TARGET_STDIO_UART_RX,
+#else
+    STDIO_UART_RX = PC_11,
+#endif
+
+    // Generic signals namings
+    LED1        = PD_10,
+    LED2        = LED1,
+    LED3        = PD_11,
+    LED4        = PD_12,
+    LED_RED     = LED1,
+    USER_BUTTON = PD_13,
+    // Standardized button names
+    BUTTON1 = USER_BUTTON,
+    SERIAL_TX   = STDIO_UART_TX,
+    SERIAL_RX   = STDIO_UART_RX,
+    USBTX       = STDIO_UART_TX,
+    USBRX       = STDIO_UART_RX,
+    I2C_SCL     = D15,
+    I2C_SDA     = D14,
+    SPI_MOSI    = D11,
+    SPI_MISO    = D12,
+    SPI_SCK     = D13,
+    SPI_CS      = D10,
+    PWM_OUT     = D3,
+
+    //USB pins
+    USB_OTG_HS_ULPI_D0 = PA_3,
+    USB_OTG_HS_SOF = PA_4,
+    USB_OTG_HS_ULPI_CK = PA_5,
+    USB_OTG_FS_SOF = PA_8,
+    USB_OTG_FS_VBUS = PA_9,
+    USB_OTG_FS_ID = PA_10,
+    USB_OTG_FS_DM = PA_11,
+    USB_OTG_FS_DP = PA_12,
+    USB_OTG_HS_ULPI_D1 = PB_0,
+    USB_OTG_HS_ULPI_D2 = PB_1,
+    USB_OTG_HS_ULPI_D4 = PB_2,
+    USB_OTG_HS_ULPI_D7 = PB_5,
+    USB_OTG_HS_ULPI_D3 = PB_10,
+    USB_OTG_HS_ID = PB_12,
+    USB_OTG_HS_ULPI_D5 = PB_12,
+    USB_OTG_HS_ULPI_D6 = PB_13,
+    USB_OTG_HS_VBUS = PB_13,
+    USB_OTG_HS_DM = PB_14,
+    USB_OTG_HS_DP = PB_15,
+    USB_OTG_HS_ULPI_STP = PC_0,
+    USB_OTG_HS_ULPI_DIR = PC_2,
+    USB_OTG_HS_ULPI_NXT = PC_3,
+
+    // Not connected
+    NC = (int)0xFFFFFFFF
+} PinName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif