The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.

Dependents:   hello SerialTestv11 SerialTestv12 Sierpinski ... more

mbed 2

This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.

Revision:
86:04dd9b1680ae
Child:
92:4fc01daae5a5
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_smartcard.h	Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,782 @@
+/**
+  ******************************************************************************
+  * @file    stm32f3xx_hal_smartcard.h
+  * @author  MCD Application Team
+  * @version V1.0.1
+  * @date    18-June-2014
+  * @brief   Header file of SMARTCARD HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************  
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_SMARTCARD_H
+#define __STM32F3xx_HAL_SMARTCARD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup SMARTCARD
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+/** 
+  * @brief SMARTCARD Init Structure definition  
+  */ 
+typedef struct
+{
+  uint32_t BaudRate;                  /*!< Configures the SmartCard communication baud rate.
+                                           The baud rate register is computed using the following formula:
+                                              Baud Rate Register = ((PCLKx) / ((hsmartcard->Init.BaudRate))) */
+                                              
+  uint32_t WordLength;                /*!< Specifies the number of data bits transmitted or received in a frame.
+                                           This parameter @ref SMARTCARD_Word_Length can only be set to 9 (8 data + 1 parity bits). */
+
+  uint32_t StopBits;                  /*!< Specifies the number of stop bits @ref SMARTCARD_Stop_Bits. 
+                                           Only 1.5 stop bits are authorized in SmartCard mode. */
+
+  uint16_t Parity;                    /*!< Specifies the parity mode.
+                                           This parameter can be a value of @ref SMARTCARD_Parity
+                                           @note The parity is enabled by default (PCE is forced to 1).
+                                                 Since the WordLength is forced to 8 bits + parity, M is
+                                                 forced to 1 and the parity bit is the 9th bit. */
+ 
+  uint16_t Mode;                      /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+                                           This parameter can be a value of @ref SMARTCARD_Mode */
+
+  uint16_t CLKPolarity;               /*!< Specifies the steady state of the serial clock.
+                                           This parameter can be a value of @ref SMARTCARD_Clock_Polarity */
+
+  uint16_t CLKPhase;                  /*!< Specifies the clock transition on which the bit capture is made.
+                                           This parameter can be a value of @ref SMARTCARD_Clock_Phase */
+
+  uint16_t CLKLastBit;                /*!< Specifies whether the clock pulse corresponding to the last transmitted
+                                           data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+                                           This parameter can be a value of @ref SMARTCARD_Last_Bit */
+                                             
+  uint16_t OneBitSampling;            /*!< Specifies wether a single sample or three samples' majority vote is selected.
+                                           Selecting the single sample method increases the receiver tolerance to clock
+                                           deviations. This parameter can be a value of @ref SMARTCARD_OneBit_Sampling. */
+
+  uint8_t  Prescaler;                 /*!< Specifies the SmartCard Prescaler */
+  
+  uint8_t  GuardTime;                 /*!< Specifies the SmartCard Guard Time */
+  
+  uint16_t NACKEnable;                /*!< Specifies whether the SmartCard NACK transmission is enabled
+                                           in case of parity error.
+                                           This parameter can be a value of @ref SMARTCARD_NACK_Enable */ 
+                                           
+  uint32_t TimeOutEnable;             /*!< Specifies whether the receiver timeout is enabled. 
+                                            This parameter can be a value of @ref SMARTCARD_Timeout_Enable*/
+  
+  uint32_t TimeOutValue;              /*!< Specifies the receiver time out value in number of baud blocks: 
+                                           it is used to implement the Character Wait Time (CWT) and 
+                                           Block Wait Time (BWT). It is coded over 24 bits. */ 
+                                           
+  uint8_t BlockLength;                /*!< Specifies the SmartCard Block Length in T=1 Reception mode.
+                                           This parameter can be any value from 0x0 to 0xFF */ 
+                                           
+  uint8_t AutoRetryCount;             /*!< Specifies the SmartCard auto-retry count (number of retries in
+                                            receive and transmit mode). When set to 0, retransmission is 
+                                            disabled. Otherwise, its maximum value is 7 (before signalling
+                                            an error) */  
+                                                                                       
+}SMARTCARD_InitTypeDef;
+
+/** 
+  * @brief  SMARTCARD advanced features initalization structure definition  
+  */
+typedef struct                                      
+{
+  uint32_t AdvFeatureInit;            /*!< Specifies which advanced SMARTCARD features is initialized. Several
+                                           advanced features may be initialized at the same time. This parameter 
+                                           can be a value of @ref SMARTCARD_Advanced_Features_Initialization_Type */                                         
+
+  uint32_t TxPinLevelInvert;          /*!< Specifies whether the TX pin active level is inverted.
+                                           This parameter can be a value of @ref SMARTCARD_Tx_Inv  */
+                                           
+  uint32_t RxPinLevelInvert;          /*!< Specifies whether the RX pin active level is inverted.
+                                           This parameter can be a value of @ref SMARTCARD_Rx_Inv  */
+
+  uint32_t DataInvert;                /*!< Specifies whether data are inverted (positive/direct logic
+                                           vs negative/inverted logic).
+                                           This parameter can be a value of @ref SMARTCARD_Data_Inv */
+                                       
+  uint32_t Swap;                      /*!< Specifies whether TX and RX pins are swapped.   
+                                           This parameter can be a value of @ref SMARTCARD_Rx_Tx_Swap */
+                                       
+  uint32_t OverrunDisable;            /*!< Specifies whether the reception overrun detection is disabled.   
+                                           This parameter can be a value of @ref SMARTCARD_Overrun_Disable */
+                                       
+  uint32_t DMADisableonRxError;       /*!< Specifies whether the DMA is disabled in case of reception error.     
+                                           This parameter can be a value of @ref SMARTCARD_DMA_Disable_on_Rx_Error */
+                                    
+  uint32_t MSBFirst;                  /*!< Specifies whether MSB is sent first on UART line.      
+                                           This parameter can be a value of @ref SMARTCARD_MSB_First */
+}SMARTCARD_AdvFeatureInitTypeDef;
+
+/** 
+  * @brief HAL State structures definition  
+  */ 
+typedef enum
+{
+  HAL_SMARTCARD_STATE_RESET             = 0x00,    /*!< Peripheral is not initialized                      */
+  HAL_SMARTCARD_STATE_READY             = 0x01,    /*!< Peripheral Initialized and ready for use           */
+  HAL_SMARTCARD_STATE_BUSY              = 0x02,    /*!< an internal process is ongoing                     */   
+  HAL_SMARTCARD_STATE_BUSY_TX           = 0x12,    /*!< Data Transmission process is ongoing               */
+  HAL_SMARTCARD_STATE_BUSY_RX           = 0x22,    /*!< Data Reception process is ongoing                  */
+  HAL_SMARTCARD_STATE_BUSY_TX_RX        = 0x32,    /*!< Data Transmission and Reception process is ongoing */  
+  HAL_SMARTCARD_STATE_TIMEOUT           = 0x03,    /*!< Timeout state                                      */
+  HAL_SMARTCARD_STATE_ERROR             = 0x04     /*!< Error                                              */
+}HAL_SMARTCARD_StateTypeDef;
+
+/** 
+  * @brief  HAL SMARTCARD Error Code structure definition  
+  */ 
+typedef enum
+{
+  HAL_SMARTCARD_ERROR_NONE      = 0x00,    /*!< No error                */
+  HAL_SMARTCARD_ERROR_PE        = 0x01,    /*!< Parity error            */
+  HAL_SMARTCARD_ERROR_NE        = 0x02,    /*!< Noise error             */
+  HAL_SMARTCARD_ERROR_FE        = 0x04,    /*!< frame error             */
+  HAL_SMARTCARD_ERROR_ORE       = 0x08,    /*!< Overrun error           */
+  HAL_SMARTCARD_ERROR_DMA       = 0x10,    /*!< DMA transfer error      */
+  HAL_SMARTCARD_ERROR_RTO       = 0x20     /*!< Receiver TimeOut error  */  
+}HAL_SMARTCARD_ErrorTypeDef;
+
+/** 
+  * @brief  SMARTCARD handle Structure definition  
+  */  
+typedef struct
+{
+  USART_TypeDef                   *Instance;        /* USART registers base address                          */
+  
+  SMARTCARD_InitTypeDef           Init;             /* SmartCard communication parameters                    */
+  
+  SMARTCARD_AdvFeatureInitTypeDef AdvancedInit;     /* SmartCard advanced features initialization parameters */
+  
+  uint8_t                         *pTxBuffPtr;      /* Pointer to SmartCard Tx transfer Buffer               */
+  
+  uint16_t                        TxXferSize;       /* SmartCard Tx Transfer size                            */
+  
+  uint16_t                        TxXferCount;      /* SmartCard Tx Transfer Counter                         */
+  
+  uint8_t                         *pRxBuffPtr;      /* Pointer to SmartCard Rx transfer Buffer               */
+  
+  uint16_t                        RxXferSize;       /* SmartCard Rx Transfer size                            */
+  
+  uint16_t                        RxXferCount;      /* SmartCard Rx Transfer Counter                         */
+  
+  DMA_HandleTypeDef               *hdmatx;          /* SmartCard Tx DMA Handle parameters                    */
+    
+  DMA_HandleTypeDef               *hdmarx;          /* SmartCard Rx DMA Handle parameters                    */
+  
+  HAL_LockTypeDef                 Lock;             /* Locking object                                        */
+  
+  HAL_SMARTCARD_StateTypeDef      State;            /* SmartCard communication state                         */
+  
+  HAL_SMARTCARD_ErrorTypeDef      ErrorCode;        /* SmartCard Error code                                  */
+  
+}SMARTCARD_HandleTypeDef;
+
+/** 
+  * @brief  SMARTCARD clock sources  
+  */  
+typedef enum
+{
+  SMARTCARD_CLOCKSOURCE_PCLK1  = 0x00, /*!< PCLK1 clock source  */
+  SMARTCARD_CLOCKSOURCE_PCLK2  = 0x01, /*!< PCLK2 clock source  */
+  SMARTCARD_CLOCKSOURCE_HSI    = 0x02, /*!< HSI clock source    */
+  SMARTCARD_CLOCKSOURCE_SYSCLK = 0x04, /*!< SYSCLK clock source */
+  SMARTCARD_CLOCKSOURCE_LSE       = 0x08, /*!< LSE clock source       */
+  SMARTCARD_CLOCKSOURCE_UNDEFINED = 0x10  /*!< undefined clock source */  
+}SMARTCARD_ClockSourceTypeDef;
+
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Constants
+  * @{
+  */
+
+/** @defgroup SMARTCARD_Word_Length   SMARTCARD Word Length 
+  * @{
+  */
+#define SMARTCARD_WORDLENGTH_9B                  ((uint32_t)USART_CR1_M0)
+#define IS_SMARTCARD_WORD_LENGTH(LENGTH) ((LENGTH) == SMARTCARD_WORDLENGTH_9B) 
+/**
+  * @}
+  */
+  
+/** @defgroup SMARTCARD_Stop_Bits    SMARTCARD Stop Bits 
+  * @{
+  */
+#define SMARTCARD_STOPBITS_1_5                   ((uint32_t)(USART_CR2_STOP))
+#define IS_SMARTCARD_STOPBITS(STOPBITS) ((STOPBITS) == SMARTCARD_STOPBITS_1_5)
+/**
+  * @}
+  */   
+
+/** @defgroup SMARTCARD_Parity SMARTCARD Parity 
+  * @{
+  */ 
+#define SMARTCARD_PARITY_EVEN                    ((uint16_t)USART_CR1_PCE)
+#define SMARTCARD_PARITY_ODD                     ((uint16_t)(USART_CR1_PCE | USART_CR1_PS)) 
+#define IS_SMARTCARD_PARITY(PARITY) (((PARITY) == SMARTCARD_PARITY_EVEN) || \
+                                     ((PARITY) == SMARTCARD_PARITY_ODD))
+/**
+  * @}
+  */ 
+
+/** @defgroup SMARTCARD_Mode SMARTCARD Transfer Mode
+  * @{
+  */ 
+#define SMARTCARD_MODE_RX                        ((uint16_t)USART_CR1_RE)
+#define SMARTCARD_MODE_TX                        ((uint16_t)USART_CR1_TE)
+#define SMARTCARD_MODE_TX_RX                     ((uint16_t)(USART_CR1_TE |USART_CR1_RE))
+#define IS_SMARTCARD_MODE(MODE) ((((MODE) & (uint16_t)0xFFF3) == 0x00) && ((MODE) != (uint16_t)0x00))
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Clock_Polarity  SMARTCARD Clock Polarity
+  * @{
+  */
+#define SMARTCARD_POLARITY_LOW                   ((uint16_t)0x0000)
+#define SMARTCARD_POLARITY_HIGH                  ((uint16_t)USART_CR2_CPOL)
+#define IS_SMARTCARD_POLARITY(CPOL) (((CPOL) == SMARTCARD_POLARITY_LOW) || ((CPOL) == SMARTCARD_POLARITY_HIGH))
+/**
+  * @}
+  */ 
+
+/** @defgroup SMARTCARD_Clock_Phase SMARTCARD Clock Phase
+  * @{
+  */
+#define SMARTCARD_PHASE_1EDGE                    ((uint16_t)0x0000)
+#define SMARTCARD_PHASE_2EDGE                    ((uint16_t)USART_CR2_CPHA)
+#define IS_SMARTCARD_PHASE(CPHA) (((CPHA) == SMARTCARD_PHASE_1EDGE) || ((CPHA) == SMARTCARD_PHASE_2EDGE))
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Last_Bit  SMARTCARD Last Bit
+  * @{
+  */
+#define SMARTCARD_LASTBIT_DISABLED                ((uint16_t)0x0000)
+#define SMARTCARD_LASTBIT_ENABLED                 ((uint16_t)USART_CR2_LBCL)
+#define IS_SMARTCARD_LASTBIT(LASTBIT) (((LASTBIT) == SMARTCARD_LASTBIT_DISABLED) || \
+                                       ((LASTBIT) == SMARTCARD_LASTBIT_ENABLED))
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_OneBit_Sampling SMARTCARD One Bit Sampling Method
+  * @{
+  */
+#define SMARTCARD_ONEBIT_SAMPLING_DISABLED   ((uint16_t)0x0000)
+#define SMARTCARD_ONEBIT_SAMPLING_ENABLED    ((uint16_t)USART_CR3_ONEBIT)
+#define IS_SMARTCARD_ONEBIT_SAMPLING(ONEBIT) (((ONEBIT) == SMARTCARD_ONEBIT_SAMPLING_DISABLED) || \
+                                              ((ONEBIT) == SMARTCARD_ONEBIT_SAMPLING_ENABLED))
+/**
+  * @}
+  */  
+
+
+/** @defgroup SMARTCARD_NACK_Enable   SMARTCARD NACK Enable
+  * @{
+  */
+#define SMARTCARD_NACK_ENABLED          ((uint16_t)USART_CR3_NACK)
+#define SMARTCARD_NACK_DISABLED         ((uint16_t)0x0000)
+#define IS_SMARTCARD_NACK(NACK) (((NACK) == SMARTCARD_NACK_ENABLED) || \
+                                       ((NACK) == SMARTCARD_NACK_DISABLED))
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Timeout_Enable  SMARTCARD Timeout Enable
+  * @{
+  */
+#define SMARTCARD_TIMEOUT_DISABLED      ((uint32_t)0x00000000)
+#define SMARTCARD_TIMEOUT_ENABLED       ((uint32_t)USART_CR2_RTOEN)
+#define IS_SMARTCARD_TIMEOUT(TIMEOUT) (((TIMEOUT) == SMARTCARD_TIMEOUT_DISABLED) || \
+                                       ((TIMEOUT) == SMARTCARD_TIMEOUT_ENABLED))
+/**
+  * @}
+  */
+  
+/** @defgroup SMARTCARD_Advanced_Features_Initialization_Type  SMARTCARD advanced feature initialization type
+  * @{
+  */
+#define SMARTCARD_ADVFEATURE_NO_INIT                 ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_TXINVERT_INIT           ((uint32_t)0x00000001)
+#define SMARTCARD_ADVFEATURE_RXINVERT_INIT           ((uint32_t)0x00000002)
+#define SMARTCARD_ADVFEATURE_DATAINVERT_INIT         ((uint32_t)0x00000004)
+#define SMARTCARD_ADVFEATURE_SWAP_INIT               ((uint32_t)0x00000008)
+#define SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT   ((uint32_t)0x00000010)
+#define SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT  ((uint32_t)0x00000020)
+#define SMARTCARD_ADVFEATURE_MSBFIRST_INIT           ((uint32_t)0x00000080)
+#define IS_SMARTCARD_ADVFEATURE_INIT(INIT)           ((INIT) <= (SMARTCARD_ADVFEATURE_NO_INIT | \
+                                                            SMARTCARD_ADVFEATURE_TXINVERT_INIT | \
+                                                            SMARTCARD_ADVFEATURE_RXINVERT_INIT | \
+                                                            SMARTCARD_ADVFEATURE_DATAINVERT_INIT | \
+                                                            SMARTCARD_ADVFEATURE_SWAP_INIT | \
+                                                            SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT | \
+                                                            SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT   | \
+                                                            SMARTCARD_ADVFEATURE_MSBFIRST_INIT))  
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Tx_Inv SMARTCARD advanced feature TX pin active level inversion
+  * @{
+  */
+#define SMARTCARD_ADVFEATURE_TXINV_DISABLE   ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_TXINV_ENABLE    ((uint32_t)USART_CR2_TXINV)
+#define IS_SMARTCARD_ADVFEATURE_TXINV(TXINV) (((TXINV) == SMARTCARD_ADVFEATURE_TXINV_DISABLE) || \
+                                         ((TXINV) == SMARTCARD_ADVFEATURE_TXINV_ENABLE))
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Rx_Inv SMARTCARD advanced feature RX pin active level inversion
+  * @{
+  */
+#define SMARTCARD_ADVFEATURE_RXINV_DISABLE   ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_RXINV_ENABLE    ((uint32_t)USART_CR2_RXINV)
+#define IS_SMARTCARD_ADVFEATURE_RXINV(RXINV) (((RXINV) == SMARTCARD_ADVFEATURE_RXINV_DISABLE) || \
+                                         ((RXINV) == SMARTCARD_ADVFEATURE_RXINV_ENABLE))
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Data_Inv  SMARTCARD advanced feature Binary Data inversion
+  * @{
+  */
+#define SMARTCARD_ADVFEATURE_DATAINV_DISABLE     ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_DATAINV_ENABLE      ((uint32_t)USART_CR2_DATAINV)
+#define IS_SMARTCARD_ADVFEATURE_DATAINV(DATAINV) (((DATAINV) == SMARTCARD_ADVFEATURE_DATAINV_DISABLE) || \
+                                             ((DATAINV) == SMARTCARD_ADVFEATURE_DATAINV_ENABLE))
+/**
+  * @}
+  */ 
+  
+/** @defgroup SMARTCARD_Rx_Tx_Swap SMARTCARD advanced feature RX TX pins swap
+  * @{
+  */
+#define SMARTCARD_ADVFEATURE_SWAP_DISABLE   ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_SWAP_ENABLE    ((uint32_t)USART_CR2_SWAP)
+#define IS_SMARTCARD_ADVFEATURE_SWAP(SWAP) (((SWAP) == SMARTCARD_ADVFEATURE_SWAP_DISABLE) || \
+                                       ((SWAP) == SMARTCARD_ADVFEATURE_SWAP_ENABLE))
+/**
+  * @}
+  */ 
+
+/** @defgroup SMARTCARD_Overrun_Disable  SMARTCARD advanced feature Overrun Disable
+  * @{
+  */
+#define SMARTCARD_ADVFEATURE_OVERRUN_ENABLE   ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_OVERRUN_DISABLE  ((uint32_t)USART_CR3_OVRDIS)
+#define IS_SMARTCARD_OVERRUN(OVERRUN)         (((OVERRUN) == SMARTCARD_ADVFEATURE_OVERRUN_ENABLE) || \
+                                          ((OVERRUN) == SMARTCARD_ADVFEATURE_OVERRUN_DISABLE))
+/**
+  * @}
+  */  
+
+/** @defgroup SMARTCARD_DMA_Disable_on_Rx_Error   SMARTCARD advanced feature DMA Disable on Rx Error
+  * @{
+  */
+#define SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR       ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR      ((uint32_t)USART_CR3_DDRE)
+#define IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(DMA)      (((DMA) == SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR) || \
+                                                   ((DMA) == SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR))
+/**
+  * @}
+  */  
+
+/** @defgroup SMARTCARD_MSB_First   SMARTCARD advanced feature MSB first
+  * @{
+  */
+#define SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE      ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE       ((uint32_t)USART_CR2_MSBFIRST)
+#define IS_SMARTCARD_ADVFEATURE_MSBFIRST(MSBFIRST) (((MSBFIRST) == SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE) || \
+                                               ((MSBFIRST) == SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE))
+/**
+  * @}
+  */  
+
+/** @defgroup SmartCard_Flags    SMARTCARD Flags
+  *        Elements values convention: 0xXXXX
+  *           - 0xXXXX  : Flag mask in the ISR register
+  * @{
+  */
+#define SMARTCARD_FLAG_REACK                     ((uint32_t)0x00400000)
+#define SMARTCARD_FLAG_TEACK                     ((uint32_t)0x00200000)  
+#define SMARTCARD_FLAG_BUSY                      ((uint32_t)0x00010000)
+#define SMARTCARD_FLAG_EOBF                      ((uint32_t)0x00001000)
+#define SMARTCARD_FLAG_RTOF                      ((uint32_t)0x00000800)
+#define SMARTCARD_FLAG_TXE                       ((uint32_t)0x00000080)
+#define SMARTCARD_FLAG_TC                        ((uint32_t)0x00000040)
+#define SMARTCARD_FLAG_RXNE                      ((uint32_t)0x00000020)
+#define SMARTCARD_FLAG_ORE                       ((uint32_t)0x00000008)
+#define SMARTCARD_FLAG_NE                        ((uint32_t)0x00000004)
+#define SMARTCARD_FLAG_FE                        ((uint32_t)0x00000002)
+#define SMARTCARD_FLAG_PE                        ((uint32_t)0x00000001)
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Interrupt_definition     SMARTCARD Interrupts Definition
+  *        Elements values convention: 0000ZZZZ0XXYYYYYb
+  *           - YYYYY  : Interrupt source position in the XX register (5bits)
+  *           - XX  : Interrupt source register (2bits)
+  *                 - 01: CR1 register
+  *                 - 10: CR2 register
+  *                 - 11: CR3 register
+  *           - ZZZZ  : Flag position in the ISR register(4bits)
+  * @{
+  */
+  
+#define SMARTCARD_IT_PE                          ((uint16_t)0x0028)
+#define SMARTCARD_IT_TXE                         ((uint16_t)0x0727)
+#define SMARTCARD_IT_TC                          ((uint16_t)0x0626)
+#define SMARTCARD_IT_RXNE                        ((uint16_t)0x0525)
+                                
+#define SMARTCARD_IT_ERR                         ((uint16_t)0x0060)
+#define SMARTCARD_IT_ORE                         ((uint16_t)0x0300)
+#define SMARTCARD_IT_NE                          ((uint16_t)0x0200)
+#define SMARTCARD_IT_FE                          ((uint16_t)0x0100)
+
+#define SMARTCARD_IT_EOB                         ((uint16_t)0x0C3B)
+#define SMARTCARD_IT_RTO                         ((uint16_t)0x0B3A)
+/**
+  * @}
+  */ 
+
+
+/** @defgroup SMARTCARD_IT_CLEAR_Flags   SMARTCARD Interruption Clear Flags
+  * @{
+  */
+#define SMARTCARD_CLEAR_PEF                       USART_ICR_PECF            /*!< Parity Error Clear Flag */          
+#define SMARTCARD_CLEAR_FEF                       USART_ICR_FECF            /*!< Framing Error Clear Flag */         
+#define SMARTCARD_CLEAR_NEF                       USART_ICR_NCF             /*!< Noise detected Clear Flag */        
+#define SMARTCARD_CLEAR_OREF                      USART_ICR_ORECF           /*!< OverRun Error Clear Flag */         
+#define SMARTCARD_CLEAR_TCF                       USART_ICR_TCCF            /*!< Transmission Complete Clear Flag */ 
+#define SMARTCARD_CLEAR_RTOF                      USART_ICR_RTOCF           /*!< Receiver Time Out Clear Flag */     
+#define SMARTCARD_CLEAR_EOBF                      USART_ICR_EOBCF           /*!< End Of Block Clear Flag */          
+/**
+  * @}
+  */
+
+/** @defgroup SMARTCARD_Request_Parameters  SMARTCARD Request Parameters
+  * @{
+  */        
+#define SMARTCARD_RXDATA_FLUSH_REQUEST        ((uint16_t)USART_RQR_RXFRQ)        /*!< Receive Data flush Request */ 
+#define SMARTCARD_TXDATA_FLUSH_REQUEST        ((uint16_t)USART_RQR_TXFRQ)        /*!< Transmit data flush Request */
+#define IS_SMARTCARD_REQUEST_PARAMETER(PARAM) (((PARAM) == SMARTCARD_RXDATA_FLUSH_REQUEST) || \
+                                               ((PARAM) == SMARTCARD_TXDATA_FLUSH_REQUEST))   
+/**
+  * @}
+  */
+  
+  
+/** @defgroup SMARTCARD_CR3_SCARCNT_LSB_POS    SMARTCARD auto retry counter LSB position in CR3 register
+  * @{
+  */
+#define SMARTCARD_CR3_SCARCNT_LSB_POS            ((uint32_t) 17)
+/**
+  * @}
+  */
+  
+/** @defgroup SMARTCARD_GTPR_GT_LSB_POS    SMARTCARD guard time value LSB position in GTPR register
+  * @{
+  */
+#define SMARTCARD_GTPR_GT_LSB_POS            ((uint32_t) 8)
+/**
+  * @}
+  */ 
+  
+/** @defgroup SMARTCARD_RTOR_BLEN_LSB_POS    SMARTCARD block length LSB position in RTOR register
+  * @{
+  */
+#define SMARTCARD_RTOR_BLEN_LSB_POS          ((uint32_t) 24)
+/**
+  * @}
+  */    
+ 
+/** @defgroup SMARTCARD_Interruption_Mask    SMARTCARD interruptions flag mask
+  * @{
+  */ 
+#define SMARTCARD_IT_MASK  ((uint16_t)0x001F)  
+/**
+  * @}
+  */
+    
+/**
+  * @}
+  */    
+    
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Macros
+  * @{
+  */
+
+/** @brief  Reset SMARTCARD handle state
+  * @param  __HANDLE__: SMARTCARD handle.
+  * @retval None
+  */
+#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMARTCARD_STATE_RESET)
+
+/** @brief  Checks whether the specified Smartcard flag is set or not.
+  * @param  __HANDLE__: specifies the SMARTCARD Handle.
+  *         The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+  * @param  __FLAG__: specifies the flag to check.
+  *        This parameter can be one of the following values:
+  *            @arg SMARTCARD_FLAG_REACK: Receive enable ackowledge flag
+  *            @arg SMARTCARD_FLAG_TEACK: Transmit enable ackowledge flag
+  *            @arg SMARTCARD_FLAG_BUSY:  Busy flag
+  *            @arg SMARTCARD_FLAG_EOBF:  End of block flag   
+  *            @arg SMARTCARD_FLAG_RTOF:  Receiver timeout flag                           
+  *            @arg SMARTCARD_FLAG_TXE:   Transmit data register empty flag
+  *            @arg SMARTCARD_FLAG_TC:    Transmission Complete flag
+  *            @arg SMARTCARD_FLAG_RXNE:  Receive data register not empty flag
+  *            @arg SMARTCARD_FLAG_ORE:   OverRun Error flag
+  *            @arg SMARTCARD_FLAG_NE:    Noise Error flag
+  *            @arg SMARTCARD_FLAG_FE:    Framing Error flag
+  *            @arg SMARTCARD_FLAG_PE:    Parity Error flag
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
+
+
+/** @brief  Enables the specified SmartCard interrupt.
+  * @param  __HANDLE__: specifies the SMARTCARD Handle.
+  *         The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+  * @param  __INTERRUPT__: specifies the SMARTCARD interrupt to enable.
+  *          This parameter can be one of the following values:
+  *            @arg SMARTCARD_IT_EOBF: End Of Block interrupt
+  *            @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt             
+  *            @arg SMARTCARD_IT_TXE:  Transmit Data Register empty interrupt
+  *            @arg SMARTCARD_IT_TC:   Transmission complete interrupt
+  *            @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg SMARTCARD_IT_PE:   Parity Error interrupt
+  *            @arg SMARTCARD_IT_ERR:  Error interrupt(Frame error, noise error, overrun error)
+  * @retval None
+  */
+#define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__)   (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+                                                                ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+                                                                ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))))
+
+/** @brief  Disables the specified SmartCard interrupt.
+  * @param  __HANDLE__: specifies the SMARTCARD Handle.
+  *         The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+  * @param  __INTERRUPT__: specifies the SMARTCARD interrupt to disable.
+  *          This parameter can be one of the following values:
+  *            @arg SMARTCARD_IT_EOBF: End Of Block interrupt
+  *            @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt             
+  *            @arg SMARTCARD_IT_TXE:  Transmit Data Register empty interrupt
+  *            @arg SMARTCARD_IT_TC:   Transmission complete interrupt
+  *            @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg SMARTCARD_IT_PE:   Parity Error interrupt
+  *            @arg SMARTCARD_IT_ERR:  Error interrupt(Frame error, noise error, overrun error)
+  * @retval None
+  */
+#define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__)  (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+                                                                ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+                                                                ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))))
+
+    
+/** @brief  Checks whether the specified SmartCard interrupt has occurred or not.
+  * @param  __HANDLE__: specifies the SMARTCARD Handle.
+  *         The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+  * @param  __IT__: specifies the SMARTCARD interrupt to check.
+  *          This parameter can be one of the following values:
+  *            @arg SMARTCARD_IT_EOBF: End Of Block interrupt
+  *            @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt  
+  *            @arg SMARTCARD_IT_TXE:  Transmit Data Register empty interrupt
+  *            @arg SMARTCARD_IT_TC:   Transmission complete interrupt
+  *            @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg SMARTCARD_IT_ORE:  OverRun Error interrupt
+  *            @arg SMARTCARD_IT_NE:   Noise Error interrupt
+  *            @arg SMARTCARD_IT_FE:   Framing Error interrupt
+  *            @arg SMARTCARD_IT_PE:   Parity Error interrupt
+  * @retval The new state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_SMARTCARD_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08))) 
+
+/** @brief  Checks whether the specified SmartCard interrupt interrupt source is enabled.
+  * @param  __HANDLE__: specifies the SMARTCARD Handle.
+  *         The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+  * @param  __IT__: specifies the SMARTCARD interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg SMARTCARD_IT_EOBF: End Of Block interrupt
+  *            @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt  
+  *            @arg SMARTCARD_IT_TXE:  Transmit Data Register empty interrupt
+  *            @arg SMARTCARD_IT_TC:   Transmission complete interrupt
+  *            @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+  *            @arg SMARTCARD_IT_ORE:  OverRun Error interrupt
+  *            @arg SMARTCARD_IT_NE:   Noise Error interrupt
+  *            @arg SMARTCARD_IT_FE:   Framing Error interrupt
+  *            @arg SMARTCARD_IT_PE:   Parity Error interrupt
+  * @retval The new state of __IT__ (TRUE or FALSE).
+  */
+#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5U) == 1)? (__HANDLE__)->Instance->CR1 : \
+                                                           (((((uint8_t)(__IT__)) >> 5U) == 2)? (__HANDLE__)->Instance->CR2 : \
+                                                           (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << (((uint16_t)(__IT__)) & SMARTCARD_IT_MASK)))
+
+
+/** @brief  Clears the specified SMARTCARD ISR flag, in setting the proper ICR register flag.
+  * @param  __HANDLE__: specifies the SMARTCARD Handle.
+  *         The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+  * @param  __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
+  *                       to clear the corresponding interrupt
+  *          This parameter can be one of the following values:
+  *            @arg USART_CLEAR_PEF: Parity Error Clear Flag          
+  *            @arg USART_CLEAR_FEF: Framing Error Clear Flag         
+  *            @arg USART_CLEAR_NEF: Noise detected Clear Flag        
+  *            @arg USART_CLEAR_OREF: OverRun Error Clear Flag         
+  *            @arg USART_CLEAR_TCF: Transmission Complete Clear Flag    
+  *            @arg USART_CLEAR_RTOF: Receiver Time Out Clear Flag     
+  *            @arg USART_CLEAR_EOBF: End Of Block Clear Flag 
+  * @retval None
+  */
+#define __HAL_SMARTCARD_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) 
+
+/** @brief  Set a specific SMARTCARD request flag.
+  * @param  __HANDLE__: specifies the SMARTCARD Handle.
+  *         The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+  * @param  __REQ__: specifies the request flag to set
+  *          This parameter can be one of the following values:  
+  *            @arg SMARTCARD_RXDATA_FLUSH_REQUEST: Receive Data flush Request 
+  *            @arg SMARTCARD_TXDATA_FLUSH_REQUEST: Transmit data flush Request 
+  *
+  * @retval None
+  */ 
+#define __HAL_SMARTCARD_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) 
+
+/** @brief  Enable the USART associated to the SMARTCARD Handle
+  * @param  __HANDLE__: specifies the SMARTCARD Handle.
+  *         The Handle Instance can be UARTx where x: 1, 2, 3 to select the USART peripheral
+  * @retval None
+  */ 
+#define __HAL_SMARTCARD_ENABLE(__HANDLE__)               ((__HANDLE__)->Instance->CR1 |=  USART_CR1_UE)
+
+/** @brief  Disable the USART associated to the SMARTCARD Handle
+  * @param  __HANDLE__: specifies the SMARTCARD Handle.
+  *         The Handle Instance can be UARTx where x: 1, 2, 3 to select the USART peripheral
+  * @retval None
+  */ 
+#define __HAL_SMARTCARD_DISABLE(__HANDLE__)              ((__HANDLE__)->Instance->CR1 &=  ~USART_CR1_UE)
+
+/** @brief  Check the Baud rate range. The maximum Baud Rate is derived from the 
+  *         maximum clock on F3 (i.e. 72 MHz) divided by the oversampling used 
+  *         on the SMARTCARD (i.e. 16) 
+  * @param  __BAUDRATE__: Baud rate set by the configuration function.
+  * @retval Test result (TRUE or FALSE) 
+  */ 
+#define IS_SMARTCARD_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 4500001)
+
+/** @brief  Check the block length range. The maximum SMARTCARD block length is 0xFF.
+  * @param  __LENGTH__: block length.
+  * @retval Test result (TRUE or FALSE) 
+  */
+#define IS_SMARTCARD_BLOCKLENGTH(__LENGTH__) ((__LENGTH__) <= 0xFF)
+
+/** @brief  Check the receiver timeout value. The maximum SMARTCARD receiver timeout 
+  *         value is 0xFFFFFF.
+  * @param  __TIMEOUTVALUE__: receiver timeout value.
+  * @retval Test result (TRUE or FALSE) 
+  */
+#define IS_SMARTCARD_TIMEOUT_VALUE(__TIMEOUTVALUE__)    ((__TIMEOUTVALUE__) <= 0xFFFFFF)
+
+/** @brief  Check the SMARTCARD autoretry counter value. The maximum number of 
+  *         retransmissions is 0x7.
+  * @param  __COUNT__: number of retransmissions
+  * @retval Test result (TRUE or FALSE) 
+  */
+#define IS_SMARTCARD_AUTORETRY_COUNT(__COUNT__)         ((__COUNT__) <= 0x7) 
+  
+
+
+/**
+  * @}
+  */ 
+
+/* Include SMARTCARD HAL Extension module */
+#include "stm32f3xx_hal_smartcard_ex.h"  
+
+                                 
+/* Exported functions --------------------------------------------------------*/
+/* Initialization and de-initialization functions  ****************************/
+HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsmartcard);
+HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsmartcard);
+
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
+void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsmartcard);
+
+/* Peripheral Control functions ***********************************************/
+void SMARTCARD_AdvFeatureConfig(SMARTCARD_HandleTypeDef *hsmartcard);
+
+/* Peripheral State and Error functions ***************************************/
+HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsmartcard);
+uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsmartcard);
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+  
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_SMARTCARD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/