mbed official / mbed

The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.

Dependents:   hello SerialTestv11 SerialTestv12 Sierpinski ... more

mbed 2

This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.

TARGET_KL82Z/TOOLCHAIN_IAR/fsl_edma.h@171:3a7713b1edbc, 2018-11-08 (annotated)

Committer:
AnnaBridge
Date:
Thu Nov 08 11:45:42 2018 +0000
Revision:
171:3a7713b1edbc
Parent:
TARGET_USENSE/TARGET_Freescale/TARGET_MCUXpresso_MCUS/TARGET_KL82Z/drivers/fsl_edma.h@145:64910690c574 
mbed library. Release version 164

Who changed what in which revision?

UserRevisionLine numberNew contents of line
AnnaBridge 145:64910690c574 1 /*
AnnaBridge 145:64910690c574 2 * Copyright (c) 2015, Freescale Semiconductor, Inc.
AnnaBridge 145:64910690c574 3 * All rights reserved.
AnnaBridge 145:64910690c574 4 *
AnnaBridge 145:64910690c574 5 * Redistribution and use in source and binary forms, with or without modification,
AnnaBridge 145:64910690c574 6 * are permitted provided that the following conditions are met:
AnnaBridge 145:64910690c574 7 *
AnnaBridge 145:64910690c574 8 * o Redistributions of source code must retain the above copyright notice, this list
AnnaBridge 145:64910690c574 9 * of conditions and the following disclaimer.
AnnaBridge 145:64910690c574 10 *
AnnaBridge 145:64910690c574 11 * o Redistributions in binary form must reproduce the above copyright notice, this
AnnaBridge 145:64910690c574 12 * list of conditions and the following disclaimer in the documentation and/or
AnnaBridge 145:64910690c574 13 * other materials provided with the distribution.
AnnaBridge 145:64910690c574 14 *
AnnaBridge 145:64910690c574 15 * o Neither the name of Freescale Semiconductor, Inc. nor the names of its
AnnaBridge 145:64910690c574 16 * contributors may be used to endorse or promote products derived from this
AnnaBridge 145:64910690c574 17 * software without specific prior written permission.
AnnaBridge 145:64910690c574 18 *
AnnaBridge 145:64910690c574 19 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
AnnaBridge 145:64910690c574 20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
AnnaBridge 145:64910690c574 21 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
AnnaBridge 145:64910690c574 22 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
AnnaBridge 145:64910690c574 23 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
AnnaBridge 145:64910690c574 24 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
AnnaBridge 145:64910690c574 25 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
AnnaBridge 145:64910690c574 26 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
AnnaBridge 145:64910690c574 27 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
AnnaBridge 145:64910690c574 28 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
AnnaBridge 145:64910690c574 29 */
AnnaBridge 145:64910690c574 30
AnnaBridge 145:64910690c574 31 #ifndef _FSL_EDMA_H_
AnnaBridge 145:64910690c574 32 #define _FSL_EDMA_H_
AnnaBridge 145:64910690c574 33
AnnaBridge 145:64910690c574 34 #include "fsl_common.h"
AnnaBridge 145:64910690c574 35
AnnaBridge 145:64910690c574 36 /*!
AnnaBridge 145:64910690c574 37 * @addtogroup edma
AnnaBridge 145:64910690c574 38 * @{
AnnaBridge 145:64910690c574 39 */
AnnaBridge 145:64910690c574 40
AnnaBridge 145:64910690c574 41 /*******************************************************************************
AnnaBridge 145:64910690c574 42 * Definitions
AnnaBridge 145:64910690c574 43 ******************************************************************************/
AnnaBridge 145:64910690c574 44
AnnaBridge 145:64910690c574 45 /*! @name Driver version */
AnnaBridge 145:64910690c574 46 /*@{*/
AnnaBridge 145:64910690c574 47 /*! @brief eDMA driver version */
AnnaBridge 145:64910690c574 48 #define FSL_EDMA_DRIVER_VERSION (MAKE_VERSION(2, 0, 1)) /*!< Version 2.0.1. */
AnnaBridge 145:64910690c574 49 /*@}*/
AnnaBridge 145:64910690c574 50
AnnaBridge 145:64910690c574 51 /*! @brief Compute the offset unit from DCHPRI3 */
AnnaBridge 145:64910690c574 52 #define DMA_DCHPRI_INDEX(channel) (((channel) & ~0x03U) | (3 - ((channel)&0x03U)))
AnnaBridge 145:64910690c574 53
AnnaBridge 145:64910690c574 54 /*! @brief Get the pointer of DCHPRIn */
AnnaBridge 145:64910690c574 55 #define DMA_DCHPRIn(base, channel) ((volatile uint8_t *)&(base->DCHPRI3))[DMA_DCHPRI_INDEX(channel)]
AnnaBridge 145:64910690c574 56
AnnaBridge 145:64910690c574 57 /*! @brief eDMA transfer configuration */
AnnaBridge 145:64910690c574 58 typedef enum _edma_transfer_size
AnnaBridge 145:64910690c574 59 {
AnnaBridge 145:64910690c574 60 kEDMA_TransferSize1Bytes = 0x0U, /*!< Source/Destination data transfer size is 1 byte every time */
AnnaBridge 145:64910690c574 61 kEDMA_TransferSize2Bytes = 0x1U, /*!< Source/Destination data transfer size is 2 bytes every time */
AnnaBridge 145:64910690c574 62 kEDMA_TransferSize4Bytes = 0x2U, /*!< Source/Destination data transfer size is 4 bytes every time */
AnnaBridge 145:64910690c574 63 kEDMA_TransferSize16Bytes = 0x4U, /*!< Source/Destination data transfer size is 16 bytes every time */
AnnaBridge 145:64910690c574 64 kEDMA_TransferSize32Bytes = 0x5U, /*!< Source/Destination data transfer size is 32 bytes every time */
AnnaBridge 145:64910690c574 65 } edma_transfer_size_t;
AnnaBridge 145:64910690c574 66
AnnaBridge 145:64910690c574 67 /*! @brief eDMA modulo configuration */
AnnaBridge 145:64910690c574 68 typedef enum _edma_modulo
AnnaBridge 145:64910690c574 69 {
AnnaBridge 145:64910690c574 70 kEDMA_ModuloDisable = 0x0U, /*!< Disable modulo */
AnnaBridge 145:64910690c574 71 kEDMA_Modulo2bytes, /*!< Circular buffer size is 2 bytes. */
AnnaBridge 145:64910690c574 72 kEDMA_Modulo4bytes, /*!< Circular buffer size is 4 bytes. */
AnnaBridge 145:64910690c574 73 kEDMA_Modulo8bytes, /*!< Circular buffer size is 8 bytes. */
AnnaBridge 145:64910690c574 74 kEDMA_Modulo16bytes, /*!< Circular buffer size is 16 bytes. */
AnnaBridge 145:64910690c574 75 kEDMA_Modulo32bytes, /*!< Circular buffer size is 32 bytes. */
AnnaBridge 145:64910690c574 76 kEDMA_Modulo64bytes, /*!< Circular buffer size is 64 bytes. */
AnnaBridge 145:64910690c574 77 kEDMA_Modulo128bytes, /*!< Circular buffer size is 128 bytes. */
AnnaBridge 145:64910690c574 78 kEDMA_Modulo256bytes, /*!< Circular buffer size is 256 bytes. */
AnnaBridge 145:64910690c574 79 kEDMA_Modulo512bytes, /*!< Circular buffer size is 512 bytes. */
AnnaBridge 145:64910690c574 80 kEDMA_Modulo1Kbytes, /*!< Circular buffer size is 1K bytes. */
AnnaBridge 145:64910690c574 81 kEDMA_Modulo2Kbytes, /*!< Circular buffer size is 2K bytes. */
AnnaBridge 145:64910690c574 82 kEDMA_Modulo4Kbytes, /*!< Circular buffer size is 4K bytes. */
AnnaBridge 145:64910690c574 83 kEDMA_Modulo8Kbytes, /*!< Circular buffer size is 8K bytes. */
AnnaBridge 145:64910690c574 84 kEDMA_Modulo16Kbytes, /*!< Circular buffer size is 16K bytes. */
AnnaBridge 145:64910690c574 85 kEDMA_Modulo32Kbytes, /*!< Circular buffer size is 32K bytes. */
AnnaBridge 145:64910690c574 86 kEDMA_Modulo64Kbytes, /*!< Circular buffer size is 64K bytes. */
AnnaBridge 145:64910690c574 87 kEDMA_Modulo128Kbytes, /*!< Circular buffer size is 128K bytes. */
AnnaBridge 145:64910690c574 88 kEDMA_Modulo256Kbytes, /*!< Circular buffer size is 256K bytes. */
AnnaBridge 145:64910690c574 89 kEDMA_Modulo512Kbytes, /*!< Circular buffer size is 512K bytes. */
AnnaBridge 145:64910690c574 90 kEDMA_Modulo1Mbytes, /*!< Circular buffer size is 1M bytes. */
AnnaBridge 145:64910690c574 91 kEDMA_Modulo2Mbytes, /*!< Circular buffer size is 2M bytes. */
AnnaBridge 145:64910690c574 92 kEDMA_Modulo4Mbytes, /*!< Circular buffer size is 4M bytes. */
AnnaBridge 145:64910690c574 93 kEDMA_Modulo8Mbytes, /*!< Circular buffer size is 8M bytes. */
AnnaBridge 145:64910690c574 94 kEDMA_Modulo16Mbytes, /*!< Circular buffer size is 16M bytes. */
AnnaBridge 145:64910690c574 95 kEDMA_Modulo32Mbytes, /*!< Circular buffer size is 32M bytes. */
AnnaBridge 145:64910690c574 96 kEDMA_Modulo64Mbytes, /*!< Circular buffer size is 64M bytes. */
AnnaBridge 145:64910690c574 97 kEDMA_Modulo128Mbytes, /*!< Circular buffer size is 128M bytes. */
AnnaBridge 145:64910690c574 98 kEDMA_Modulo256Mbytes, /*!< Circular buffer size is 256M bytes. */
AnnaBridge 145:64910690c574 99 kEDMA_Modulo512Mbytes, /*!< Circular buffer size is 512M bytes. */
AnnaBridge 145:64910690c574 100 kEDMA_Modulo1Gbytes, /*!< Circular buffer size is 1G bytes. */
AnnaBridge 145:64910690c574 101 kEDMA_Modulo2Gbytes, /*!< Circular buffer size is 2G bytes. */
AnnaBridge 145:64910690c574 102 } edma_modulo_t;
AnnaBridge 145:64910690c574 103
AnnaBridge 145:64910690c574 104 /*! @brief Bandwidth control */
AnnaBridge 145:64910690c574 105 typedef enum _edma_bandwidth
AnnaBridge 145:64910690c574 106 {
AnnaBridge 145:64910690c574 107 kEDMA_BandwidthStallNone = 0x0U, /*!< No eDMA engine stalls. */
AnnaBridge 145:64910690c574 108 kEDMA_BandwidthStall4Cycle = 0x2U, /*!< eDMA engine stalls for 4 cycles after each read/write. */
AnnaBridge 145:64910690c574 109 kEDMA_BandwidthStall8Cycle = 0x3U, /*!< eDMA engine stalls for 8 cycles after each read/write. */
AnnaBridge 145:64910690c574 110 } edma_bandwidth_t;
AnnaBridge 145:64910690c574 111
AnnaBridge 145:64910690c574 112 /*! @brief Channel link type */
AnnaBridge 145:64910690c574 113 typedef enum _edma_channel_link_type
AnnaBridge 145:64910690c574 114 {
AnnaBridge 145:64910690c574 115 kEDMA_LinkNone = 0x0U, /*!< No channel link */
AnnaBridge 145:64910690c574 116 kEDMA_MinorLink, /*!< Channel link after each minor loop */
AnnaBridge 145:64910690c574 117 kEDMA_MajorLink, /*!< Channel link while major loop count exhausted */
AnnaBridge 145:64910690c574 118 } edma_channel_link_type_t;
AnnaBridge 145:64910690c574 119
AnnaBridge 145:64910690c574 120 /*!@brief eDMA channel status flags. */
AnnaBridge 145:64910690c574 121 enum _edma_channel_status_flags
AnnaBridge 145:64910690c574 122 {
AnnaBridge 145:64910690c574 123 kEDMA_DoneFlag = 0x1U, /*!< DONE flag, set while transfer finished, CITER value exhausted*/
AnnaBridge 145:64910690c574 124 kEDMA_ErrorFlag = 0x2U, /*!< eDMA error flag, an error occurred in a transfer */
AnnaBridge 145:64910690c574 125 kEDMA_InterruptFlag = 0x4U, /*!< eDMA interrupt flag, set while an interrupt occurred of this channel */
AnnaBridge 145:64910690c574 126 };
AnnaBridge 145:64910690c574 127
AnnaBridge 145:64910690c574 128 /*! @brief eDMA channel error status flags. */
AnnaBridge 145:64910690c574 129 enum _edma_error_status_flags
AnnaBridge 145:64910690c574 130 {
AnnaBridge 145:64910690c574 131 kEDMA_DestinationBusErrorFlag = DMA_ES_DBE_MASK, /*!< Bus error on destination address */
AnnaBridge 145:64910690c574 132 kEDMA_SourceBusErrorFlag = DMA_ES_SBE_MASK, /*!< Bus error on the source address */
AnnaBridge 145:64910690c574 133 kEDMA_ScatterGatherErrorFlag = DMA_ES_SGE_MASK, /*!< Error on the Scatter/Gather address, not 32byte aligned. */
AnnaBridge 145:64910690c574 134 kEDMA_NbytesErrorFlag = DMA_ES_NCE_MASK, /*!< NBYTES/CITER configuration error */
AnnaBridge 145:64910690c574 135 kEDMA_DestinationOffsetErrorFlag = DMA_ES_DOE_MASK, /*!< Destination offset not aligned with destination size */
AnnaBridge 145:64910690c574 136 kEDMA_DestinationAddressErrorFlag = DMA_ES_DAE_MASK, /*!< Destination address not aligned with destination size */
AnnaBridge 145:64910690c574 137 kEDMA_SourceOffsetErrorFlag = DMA_ES_SOE_MASK, /*!< Source offset not aligned with source size */
AnnaBridge 145:64910690c574 138 kEDMA_SourceAddressErrorFlag = DMA_ES_SAE_MASK, /*!< Source address not aligned with source size*/
AnnaBridge 145:64910690c574 139 kEDMA_ErrorChannelFlag = DMA_ES_ERRCHN_MASK, /*!< Error channel number of the cancelled channel number */
AnnaBridge 145:64910690c574 140 kEDMA_ChannelPriorityErrorFlag = DMA_ES_CPE_MASK, /*!< Channel priority is not unique. */
AnnaBridge 145:64910690c574 141 kEDMA_TransferCanceledFlag = DMA_ES_ECX_MASK, /*!< Transfer cancelled */
AnnaBridge 145:64910690c574 142 #if defined(FSL_FEATURE_EDMA_CHANNEL_GROUP_COUNT) && FSL_FEATURE_EDMA_CHANNEL_GROUP_COUNT > 1
AnnaBridge 145:64910690c574 143 kEDMA_GroupPriorityErrorFlag = DMA_ES_GPE_MASK, /*!< Group priority is not unique. */
AnnaBridge 145:64910690c574 144 #endif
AnnaBridge 145:64910690c574 145 kEDMA_ValidFlag = DMA_ES_VLD_MASK, /*!< No error occurred, this bit is 0. Otherwise, it is 1. */
AnnaBridge 145:64910690c574 146 };
AnnaBridge 145:64910690c574 147
AnnaBridge 145:64910690c574 148 /*! @brief eDMA interrupt source */
AnnaBridge 145:64910690c574 149 typedef enum _edma_interrupt_enable
AnnaBridge 145:64910690c574 150 {
AnnaBridge 145:64910690c574 151 kEDMA_ErrorInterruptEnable = 0x1U, /*!< Enable interrupt while channel error occurs. */
AnnaBridge 145:64910690c574 152 kEDMA_MajorInterruptEnable = DMA_CSR_INTMAJOR_MASK, /*!< Enable interrupt while major count exhausted. */
AnnaBridge 145:64910690c574 153 kEDMA_HalfInterruptEnable = DMA_CSR_INTHALF_MASK, /*!< Enable interrupt while major count to half value. */
AnnaBridge 145:64910690c574 154 } edma_interrupt_enable_t;
AnnaBridge 145:64910690c574 155
AnnaBridge 145:64910690c574 156 /*! @brief eDMA transfer type */
AnnaBridge 145:64910690c574 157 typedef enum _edma_transfer_type
AnnaBridge 145:64910690c574 158 {
AnnaBridge 145:64910690c574 159 kEDMA_MemoryToMemory = 0x0U, /*!< Transfer from memory to memory */
AnnaBridge 145:64910690c574 160 kEDMA_PeripheralToMemory, /*!< Transfer from peripheral to memory */
AnnaBridge 145:64910690c574 161 kEDMA_MemoryToPeripheral, /*!< Transfer from memory to peripheral */
AnnaBridge 145:64910690c574 162 } edma_transfer_type_t;
AnnaBridge 145:64910690c574 163
AnnaBridge 145:64910690c574 164 /*! @brief eDMA transfer status */
AnnaBridge 145:64910690c574 165 enum _edma_transfer_status
AnnaBridge 145:64910690c574 166 {
AnnaBridge 145:64910690c574 167 kStatus_EDMA_QueueFull = MAKE_STATUS(kStatusGroup_EDMA, 0), /*!< TCD queue is full. */
AnnaBridge 145:64910690c574 168 kStatus_EDMA_Busy = MAKE_STATUS(kStatusGroup_EDMA, 1), /*!< Channel is busy and can't handle the
AnnaBridge 145:64910690c574 169 transfer request. */
AnnaBridge 145:64910690c574 170 };
AnnaBridge 145:64910690c574 171
AnnaBridge 145:64910690c574 172 /*! @brief eDMA global configuration structure.*/
AnnaBridge 145:64910690c574 173 typedef struct _edma_config
AnnaBridge 145:64910690c574 174 {
AnnaBridge 145:64910690c574 175 bool enableContinuousLinkMode; /*!< Enable (true) continuous link mode. Upon minor loop completion, the channel
AnnaBridge 145:64910690c574 176 activates again if that channel has a minor loop channel link enabled and
AnnaBridge 145:64910690c574 177 the link channel is itself. */
AnnaBridge 145:64910690c574 178 bool enableHaltOnError; /*!< Enable (true) transfer halt on error. Any error causes the HALT bit to set.
AnnaBridge 145:64910690c574 179 Subsequently, all service requests are ignored until the HALT bit is cleared.*/
AnnaBridge 145:64910690c574 180 bool enableRoundRobinArbitration; /*!< Enable (true) round robin channel arbitration method, or fixed priority
AnnaBridge 145:64910690c574 181 arbitration is used for channel selection */
AnnaBridge 145:64910690c574 182 bool enableDebugMode; /*!< Enable(true) eDMA debug mode. When in debug mode, the eDMA stalls the start of
AnnaBridge 145:64910690c574 183 a new channel. Executing channels are allowed to complete. */
AnnaBridge 145:64910690c574 184 } edma_config_t;
AnnaBridge 145:64910690c574 185
AnnaBridge 145:64910690c574 186 /*!
AnnaBridge 145:64910690c574 187 * @brief eDMA transfer configuration
AnnaBridge 145:64910690c574 188 *
AnnaBridge 145:64910690c574 189 * This structure configures the source/destination transfer attribute.
AnnaBridge 145:64910690c574 190 * This figure shows the eDMA's transfer model:
AnnaBridge 145:64910690c574 191 * _________________________________________________
AnnaBridge 145:64910690c574 192 * | Transfer Size | |
AnnaBridge 145:64910690c574 193 * Minor Loop |_______________| Major loop Count 1 |
AnnaBridge 145:64910690c574 194 * Bytes | Transfer Size | |
AnnaBridge 145:64910690c574 195 * ____________|_______________|____________________|--> Minor loop complete
AnnaBridge 145:64910690c574 196 * ____________________________________
AnnaBridge 145:64910690c574 197 * | | |
AnnaBridge 145:64910690c574 198 * |_______________| Major Loop Count 2 |
AnnaBridge 145:64910690c574 199 * | | |
AnnaBridge 145:64910690c574 200 * |_______________|____________________|--> Minor loop Complete
AnnaBridge 145:64910690c574 201 *
AnnaBridge 145:64910690c574 202 * ---------------------------------------------------------> Transfer complete
AnnaBridge 145:64910690c574 203 */
AnnaBridge 145:64910690c574 204 typedef struct _edma_transfer_config
AnnaBridge 145:64910690c574 205 {
AnnaBridge 145:64910690c574 206 uint32_t srcAddr; /*!< Source data address. */
AnnaBridge 145:64910690c574 207 uint32_t destAddr; /*!< Destination data address. */
AnnaBridge 145:64910690c574 208 edma_transfer_size_t srcTransferSize; /*!< Source data transfer size. */
AnnaBridge 145:64910690c574 209 edma_transfer_size_t destTransferSize; /*!< Destination data transfer size. */
AnnaBridge 145:64910690c574 210 int16_t srcOffset; /*!< Sign-extended offset applied to the current source address to
AnnaBridge 145:64910690c574 211 form the next-state value as each source read is completed. */
AnnaBridge 145:64910690c574 212 int16_t destOffset; /*!< Sign-extended offset applied to the current destination address to
AnnaBridge 145:64910690c574 213 form the next-state value as each destination write is completed. */
AnnaBridge 145:64910690c574 214 uint16_t minorLoopBytes; /*!< Bytes to transfer in a minor loop*/
AnnaBridge 145:64910690c574 215 uint32_t majorLoopCounts; /*!< Major loop iteration count. */
AnnaBridge 145:64910690c574 216 } edma_transfer_config_t;
AnnaBridge 145:64910690c574 217
AnnaBridge 145:64910690c574 218 /*! @brief eDMA channel priority configuration */
AnnaBridge 145:64910690c574 219 typedef struct _edma_channel_Preemption_config
AnnaBridge 145:64910690c574 220 {
AnnaBridge 145:64910690c574 221 bool enableChannelPreemption; /*!< If true: channel can be suspended by other channel with higher priority */
AnnaBridge 145:64910690c574 222 bool enablePreemptAbility; /*!< If true: channel can suspend other channel with low priority */
AnnaBridge 145:64910690c574 223 uint8_t channelPriority; /*!< Channel priority */
AnnaBridge 145:64910690c574 224 } edma_channel_Preemption_config_t;
AnnaBridge 145:64910690c574 225
AnnaBridge 145:64910690c574 226 /*! @brief eDMA minor offset configuration */
AnnaBridge 145:64910690c574 227 typedef struct _edma_minor_offset_config
AnnaBridge 145:64910690c574 228 {
AnnaBridge 145:64910690c574 229 bool enableSrcMinorOffset; /*!< Enable(true) or Disable(false) source minor loop offset. */
AnnaBridge 145:64910690c574 230 bool enableDestMinorOffset; /*!< Enable(true) or Disable(false) destination minor loop offset. */
AnnaBridge 145:64910690c574 231 uint32_t minorOffset; /*!< Offset for minor loop mapping. */
AnnaBridge 145:64910690c574 232 } edma_minor_offset_config_t;
AnnaBridge 145:64910690c574 233
AnnaBridge 145:64910690c574 234 /*!
AnnaBridge 145:64910690c574 235 * @brief eDMA TCD.
AnnaBridge 145:64910690c574 236 *
AnnaBridge 145:64910690c574 237 * This structure is same as TCD register which is described in reference manual,
AnnaBridge 145:64910690c574 238 * and is used to configure the scatter/gather feature as a next hardware TCD.
AnnaBridge 145:64910690c574 239 */
AnnaBridge 145:64910690c574 240 typedef struct _edma_tcd
AnnaBridge 145:64910690c574 241 {
AnnaBridge 145:64910690c574 242 __IO uint32_t SADDR; /*!< SADDR register, used to save source address */
AnnaBridge 145:64910690c574 243 __IO uint16_t SOFF; /*!< SOFF register, save offset bytes every transfer */
AnnaBridge 145:64910690c574 244 __IO uint16_t ATTR; /*!< ATTR register, source/destination transfer size and modulo */
AnnaBridge 145:64910690c574 245 __IO uint32_t NBYTES; /*!< Nbytes register, minor loop length in bytes */
AnnaBridge 145:64910690c574 246 __IO uint32_t SLAST; /*!< SLAST register */
AnnaBridge 145:64910690c574 247 __IO uint32_t DADDR; /*!< DADDR register, used for destination address */
AnnaBridge 145:64910690c574 248 __IO uint16_t DOFF; /*!< DOFF register, used for destination offset */
AnnaBridge 145:64910690c574 249 __IO uint16_t CITER; /*!< CITER register, current minor loop numbers, for unfinished minor loop.*/
AnnaBridge 145:64910690c574 250 __IO uint32_t DLAST_SGA; /*!< DLASTSGA register, next stcd address used in scatter-gather mode */
AnnaBridge 145:64910690c574 251 __IO uint16_t CSR; /*!< CSR register, for TCD control status */
AnnaBridge 145:64910690c574 252 __IO uint16_t BITER; /*!< BITER register, begin minor loop count. */
AnnaBridge 145:64910690c574 253 } edma_tcd_t;
AnnaBridge 145:64910690c574 254
AnnaBridge 145:64910690c574 255 /*! @brief Callback for eDMA */
AnnaBridge 145:64910690c574 256 struct _edma_handle;
AnnaBridge 145:64910690c574 257
AnnaBridge 145:64910690c574 258 /*! @brief Define Callback function for eDMA. */
AnnaBridge 145:64910690c574 259 typedef void (*edma_callback)(struct _edma_handle *handle, void *userData, bool transferDone, uint32_t tcds);
AnnaBridge 145:64910690c574 260
AnnaBridge 145:64910690c574 261 /*! @brief eDMA transfer handle structure */
AnnaBridge 145:64910690c574 262 typedef struct _edma_handle
AnnaBridge 145:64910690c574 263 {
AnnaBridge 145:64910690c574 264 edma_callback callback; /*!< Callback function for major count exhausted. */
AnnaBridge 145:64910690c574 265 void *userData; /*!< Callback function parameter. */
AnnaBridge 145:64910690c574 266 DMA_Type *base; /*!< eDMA peripheral base address. */
AnnaBridge 145:64910690c574 267 edma_tcd_t *tcdPool; /*!< Pointer to memory stored TCDs. */
AnnaBridge 145:64910690c574 268 uint8_t channel; /*!< eDMA channel number. */
AnnaBridge 145:64910690c574 269 volatile int8_t header; /*!< The first TCD index. */
AnnaBridge 145:64910690c574 270 volatile int8_t tail; /*!< The last TCD index. */
AnnaBridge 145:64910690c574 271 volatile int8_t tcdUsed; /*!< The number of used TCD slots. */
AnnaBridge 145:64910690c574 272 volatile int8_t tcdSize; /*!< The total number of TCD slots in the queue. */
AnnaBridge 145:64910690c574 273 uint8_t flags; /*!< The status of the current channel. */
AnnaBridge 145:64910690c574 274 } edma_handle_t;
AnnaBridge 145:64910690c574 275
AnnaBridge 145:64910690c574 276 /*******************************************************************************
AnnaBridge 145:64910690c574 277 * APIs
AnnaBridge 145:64910690c574 278 ******************************************************************************/
AnnaBridge 145:64910690c574 279 #if defined(__cplusplus)
AnnaBridge 145:64910690c574 280 extern "C" {
AnnaBridge 145:64910690c574 281 #endif /* __cplusplus */
AnnaBridge 145:64910690c574 282
AnnaBridge 145:64910690c574 283 /*!
AnnaBridge 145:64910690c574 284 * @name eDMA initialization and De-initialization
AnnaBridge 145:64910690c574 285 * @{
AnnaBridge 145:64910690c574 286 */
AnnaBridge 145:64910690c574 287
AnnaBridge 145:64910690c574 288 /*!
AnnaBridge 145:64910690c574 289 * @brief Initializes eDMA peripheral.
AnnaBridge 145:64910690c574 290 *
AnnaBridge 145:64910690c574 291 * This function ungates the eDMA clock and configures the eDMA peripheral according
AnnaBridge 145:64910690c574 292 * to the configuration structure.
AnnaBridge 145:64910690c574 293 *
AnnaBridge 145:64910690c574 294 * @param base eDMA peripheral base address.
AnnaBridge 145:64910690c574 295 * @param config Pointer to configuration structure, see "edma_config_t".
AnnaBridge 145:64910690c574 296 * @note This function enable the minor loop map feature.
AnnaBridge 145:64910690c574 297 */
AnnaBridge 145:64910690c574 298 void EDMA_Init(DMA_Type *base, const edma_config_t *config);
AnnaBridge 145:64910690c574 299
AnnaBridge 145:64910690c574 300 /*!
AnnaBridge 145:64910690c574 301 * @brief Deinitializes eDMA peripheral.
AnnaBridge 145:64910690c574 302 *
AnnaBridge 145:64910690c574 303 * This function gates the eDMA clock.
AnnaBridge 145:64910690c574 304 *
AnnaBridge 145:64910690c574 305 * @param base eDMA peripheral base address.
AnnaBridge 145:64910690c574 306 */
AnnaBridge 145:64910690c574 307 void EDMA_Deinit(DMA_Type *base);
AnnaBridge 145:64910690c574 308
AnnaBridge 145:64910690c574 309 /*!
AnnaBridge 145:64910690c574 310 * @brief Gets the eDMA default configuration structure.
AnnaBridge 145:64910690c574 311 *
AnnaBridge 145:64910690c574 312 * This function sets the configuration structure to a default value.
AnnaBridge 145:64910690c574 313 * The default configuration is set to the following value:
AnnaBridge 145:64910690c574 314 * @code
AnnaBridge 145:64910690c574 315 * config.enableContinuousLinkMode = false;
AnnaBridge 145:64910690c574 316 * config.enableHaltOnError = true;
AnnaBridge 145:64910690c574 317 * config.enableRoundRobinArbitration = false;
AnnaBridge 145:64910690c574 318 * config.enableDebugMode = false;
AnnaBridge 145:64910690c574 319 * @endcode
AnnaBridge 145:64910690c574 320 *
AnnaBridge 145:64910690c574 321 * @param config Pointer to eDMA configuration structure.
AnnaBridge 145:64910690c574 322 */
AnnaBridge 145:64910690c574 323 void EDMA_GetDefaultConfig(edma_config_t *config);
AnnaBridge 145:64910690c574 324
AnnaBridge 145:64910690c574 325 /* @} */
AnnaBridge 145:64910690c574 326 /*!
AnnaBridge 145:64910690c574 327 * @name eDMA Channel Operation
AnnaBridge 145:64910690c574 328 * @{
AnnaBridge 145:64910690c574 329 */
AnnaBridge 145:64910690c574 330
AnnaBridge 145:64910690c574 331 /*!
AnnaBridge 145:64910690c574 332 * @brief Sets all TCD registers to a default value.
AnnaBridge 145:64910690c574 333 *
AnnaBridge 145:64910690c574 334 * This function sets TCD registers for this channel to default value.
AnnaBridge 145:64910690c574 335 *
AnnaBridge 145:64910690c574 336 * @param base eDMA peripheral base address.
AnnaBridge 145:64910690c574 337 * @param channel eDMA channel number.
AnnaBridge 145:64910690c574 338 * @note This function must not be called while the channel transfer is on-going,
AnnaBridge 145:64910690c574 339 * or it causes unpredictable results.
AnnaBridge 145:64910690c574 340 * @note This function enables the auto stop request feature.
AnnaBridge 145:64910690c574 341 */
AnnaBridge 145:64910690c574 342 void EDMA_ResetChannel(DMA_Type *base, uint32_t channel);
AnnaBridge 145:64910690c574 343
AnnaBridge 145:64910690c574 344 /*!
AnnaBridge 145:64910690c574 345 * @brief Configures the eDMA transfer attribute.
AnnaBridge 145:64910690c574 346 *
AnnaBridge 145:64910690c574 347 * This function configures the transfer attribute, including source address, destination address,
AnnaBridge 145:64910690c574 348 * transfer size, address offset, and so on. It also configures the scatter gather feature if the
AnnaBridge 145:64910690c574 349 * user supplies the TCD address.
AnnaBridge 145:64910690c574 350 * Example:
AnnaBridge 145:64910690c574 351 * @code
AnnaBridge 145:64910690c574 352 * edma_transfer_t config;
AnnaBridge 145:64910690c574 353 * edma_tcd_t tcd;
AnnaBridge 145:64910690c574 354 * config.srcAddr = ..;
AnnaBridge 145:64910690c574 355 * config.destAddr = ..;
AnnaBridge 145:64910690c574 356 * ...
AnnaBridge 145:64910690c574 357 * EDMA_SetTransferConfig(DMA0, channel, &config, &stcd);
AnnaBridge 145:64910690c574 358 * @endcode
AnnaBridge 145:64910690c574 359 *
AnnaBridge 145:64910690c574 360 * @param base eDMA peripheral base address.
AnnaBridge 145:64910690c574 361 * @param channel eDMA channel number.
AnnaBridge 145:64910690c574 362 * @param config Pointer to eDMA transfer configuration structure.
AnnaBridge 145:64910690c574 363 * @param nextTcd Point to TCD structure. It can be NULL if users
AnnaBridge 145:64910690c574 364 * do not want to enable scatter/gather feature.
AnnaBridge 145:64910690c574 365 * @note If nextTcd is not NULL, it means scatter gather feature is enabled
AnnaBridge 145:64910690c574 366 * and DREQ bit is cleared in the previous transfer configuration, which
AnnaBridge 145:64910690c574 367 * is set in eDMA_ResetChannel.
AnnaBridge 145:64910690c574 368 */
AnnaBridge 145:64910690c574 369 void EDMA_SetTransferConfig(DMA_Type *base,
AnnaBridge 145:64910690c574 370 uint32_t channel,
AnnaBridge 145:64910690c574 371 const edma_transfer_config_t *config,
AnnaBridge 145:64910690c574 372 edma_tcd_t *nextTcd);
AnnaBridge 145:64910690c574 373
AnnaBridge 145:64910690c574 374 /*!
AnnaBridge 145:64910690c574 375 * @brief Configures the eDMA minor offset feature.
AnnaBridge 145:64910690c574 376 *
AnnaBridge 145:64910690c574 377 * Minor offset means signed-extended value added to source address or destination
AnnaBridge 145:64910690c574 378 * address after each minor loop.
AnnaBridge 145:64910690c574 379 *
AnnaBridge 145:64910690c574 380 * @param base eDMA peripheral base address.
AnnaBridge 145:64910690c574 381 * @param channel eDMA channel number.
AnnaBridge 145:64910690c574 382 * @param config Pointer to Minor offset configuration structure.
AnnaBridge 145:64910690c574 383 */
AnnaBridge 145:64910690c574 384 void EDMA_SetMinorOffsetConfig(DMA_Type *base, uint32_t channel, const edma_minor_offset_config_t *config);
AnnaBridge 145:64910690c574 385
AnnaBridge 145:64910690c574 386 /*!
AnnaBridge 145:64910690c574 387 * @brief Configures the eDMA channel preemption feature.
AnnaBridge 145:64910690c574 388 *
AnnaBridge 145:64910690c574 389 * This function configures the channel preemption attribute and the priority of the channel.
AnnaBridge 145:64910690c574 390 *
AnnaBridge 145:64910690c574 391 * @param base eDMA peripheral base address.
AnnaBridge 145:64910690c574 392 * @param channel eDMA channel number
AnnaBridge 145:64910690c574 393 * @param config Pointer to channel preemption configuration structure.
AnnaBridge 145:64910690c574 394 */
AnnaBridge 145:64910690c574 395 static inline void EDMA_SetChannelPreemptionConfig(DMA_Type *base,
AnnaBridge 145:64910690c574 396 uint32_t channel,
AnnaBridge 145:64910690c574 397 const edma_channel_Preemption_config_t *config)
AnnaBridge 145:64910690c574 398 {
AnnaBridge 145:64910690c574 399 assert(channel < FSL_FEATURE_EDMA_MODULE_CHANNEL);
AnnaBridge 145:64910690c574 400 assert(config != NULL);
AnnaBridge 145:64910690c574 401
AnnaBridge 145:64910690c574 402 DMA_DCHPRIn(base, channel) =
AnnaBridge 145:64910690c574 403 (DMA_DCHPRI0_DPA(!config->enablePreemptAbility) | DMA_DCHPRI0_ECP(config->enableChannelPreemption) |
AnnaBridge 145:64910690c574 404 DMA_DCHPRI0_CHPRI(config->channelPriority));
AnnaBridge 145:64910690c574 405 }
AnnaBridge 145:64910690c574 406
AnnaBridge 145:64910690c574 407 /*!
AnnaBridge 145:64910690c574 408 * @brief Sets the channel link for the eDMA transfer.
AnnaBridge 145:64910690c574 409 *
AnnaBridge 145:64910690c574 410 * This function configures minor link or major link mode. The minor link means that the channel link is
AnnaBridge 145:64910690c574 411 * triggered every time CITER decreases by 1. The major link means that the channel link is triggered when the CITER is
AnnaBridge 145:64910690c574 412 * exhausted.
AnnaBridge 145:64910690c574 413 *
AnnaBridge 145:64910690c574 414 * @param base eDMA peripheral base address.
AnnaBridge 145:64910690c574 415 * @param channel eDMA channel number.
AnnaBridge 145:64910690c574 416 * @param type Channel link type, it can be one of:
AnnaBridge 145:64910690c574 417 * @arg kEDMA_LinkNone
AnnaBridge 145:64910690c574 418 * @arg kEDMA_MinorLink
AnnaBridge 145:64910690c574 419 * @arg kEDMA_MajorLink
AnnaBridge 145:64910690c574 420 * @param linkedChannel The linked channel number.
AnnaBridge 145:64910690c574 421 * @note Users should ensure that DONE flag is cleared before calling this interface, or the configuration is invalid.
AnnaBridge 145:64910690c574 422 */
AnnaBridge 145:64910690c574 423 void EDMA_SetChannelLink(DMA_Type *base, uint32_t channel, edma_channel_link_type_t type, uint32_t linkedChannel);
AnnaBridge 145:64910690c574 424
AnnaBridge 145:64910690c574 425 /*!
AnnaBridge 145:64910690c574 426 * @brief Sets the bandwidth for the eDMA transfer.
AnnaBridge 145:64910690c574 427 *
AnnaBridge 145:64910690c574 428 * In general, because the eDMA processes the minor loop, it continuously generates read/write sequences
AnnaBridge 145:64910690c574 429 * until the minor count is exhausted. The bandwidth forces the eDMA to stall after the completion of
AnnaBridge 145:64910690c574 430 * each read/write access to control the bus request bandwidth seen by the crossbar switch.
AnnaBridge 145:64910690c574 431 *
AnnaBridge 145:64910690c574 432 * @param base eDMA peripheral base address.
AnnaBridge 145:64910690c574 433 * @param channel eDMA channel number.
AnnaBridge 145:64910690c574 434 * @param bandWidth Bandwidth setting, it can be one of:
AnnaBridge 145:64910690c574 435 * @arg kEDMABandwidthStallNone
AnnaBridge 145:64910690c574 436 * @arg kEDMABandwidthStall4Cycle
AnnaBridge 145:64910690c574 437 * @arg kEDMABandwidthStall8Cycle
AnnaBridge 145:64910690c574 438 */
AnnaBridge 145:64910690c574 439 void EDMA_SetBandWidth(DMA_Type *base, uint32_t channel, edma_bandwidth_t bandWidth);
AnnaBridge 145:64910690c574 440
AnnaBridge 145:64910690c574 441 /*!
AnnaBridge 145:64910690c574 442 * @brief Sets the source modulo and destination modulo for eDMA transfer.
AnnaBridge 145:64910690c574 443 *
AnnaBridge 145:64910690c574 444 * This function defines a specific address range specified to be the value after (SADDR + SOFF)/(DADDR + DOFF)
AnnaBridge 145:64910690c574 445 * calculation is performed or the original register value. It provides the ability to implement a circular data
AnnaBridge 145:64910690c574 446 * queue easily.
AnnaBridge 145:64910690c574 447 *
AnnaBridge 145:64910690c574 448 * @param base eDMA peripheral base address.
AnnaBridge 145:64910690c574 449 * @param channel eDMA channel number.
AnnaBridge 145:64910690c574 450 * @param srcModulo Source modulo value.
AnnaBridge 145:64910690c574 451 * @param destModulo Destination modulo value.
AnnaBridge 145:64910690c574 452 */
AnnaBridge 145:64910690c574 453 void EDMA_SetModulo(DMA_Type *base, uint32_t channel, edma_modulo_t srcModulo, edma_modulo_t destModulo);
AnnaBridge 145:64910690c574 454
AnnaBridge 145:64910690c574 455 #if defined(FSL_FEATURE_EDMA_ASYNCHRO_REQUEST_CHANNEL_COUNT) && FSL_FEATURE_EDMA_ASYNCHRO_REQUEST_CHANNEL_COUNT
AnnaBridge 145:64910690c574 456 /*!
AnnaBridge 145:64910690c574 457 * @brief Enables an async request for the eDMA transfer.
AnnaBridge 145:64910690c574 458 *
AnnaBridge 145:64910690c574 459 * @param base eDMA peripheral base address.
AnnaBridge 145:64910690c574 460 * @param channel eDMA channel number.
AnnaBridge 145:64910690c574 461 * @param enable The command for enable(ture) or disable(false).
AnnaBridge 145:64910690c574 462 */
AnnaBridge 145:64910690c574 463 static inline void EDMA_EnableAsyncRequest(DMA_Type *base, uint32_t channel, bool enable)
AnnaBridge 145:64910690c574 464 {
AnnaBridge 145:64910690c574 465 assert(channel < FSL_FEATURE_DMAMUX_MODULE_CHANNEL);
AnnaBridge 145:64910690c574 466
AnnaBridge 145:64910690c574 467 base->EARS = (base->EARS & (~(1U << channel))) | ((uint32_t)enable << channel);
AnnaBridge 145:64910690c574 468 }
AnnaBridge 145:64910690c574 469 #endif /* FSL_FEATURE_EDMA_ASYNCHRO_REQUEST_CHANNEL_COUNT */
AnnaBridge 145:64910690c574 470
AnnaBridge 145:64910690c574 471 /*!
AnnaBridge 145:64910690c574 472 * @brief Enables an auto stop request for the eDMA transfer.
AnnaBridge 145:64910690c574 473 *
AnnaBridge 145:64910690c574 474 * If enabling the auto stop request, the eDMA hardware automatically disables the hardware channel request.
AnnaBridge 145:64910690c574 475 *
AnnaBridge 145:64910690c574 476 * @param base eDMA peripheral base address.
AnnaBridge 145:64910690c574 477 * @param channel eDMA channel number.
AnnaBridge 145:64910690c574 478 * @param enable The command for enable (true) or disable (false).
AnnaBridge 145:64910690c574 479 */
AnnaBridge 145:64910690c574 480 static inline void EDMA_EnableAutoStopRequest(DMA_Type *base, uint32_t channel, bool enable)
AnnaBridge 145:64910690c574 481 {
AnnaBridge 145:64910690c574 482 assert(channel < FSL_FEATURE_DMAMUX_MODULE_CHANNEL);
AnnaBridge 145:64910690c574 483
AnnaBridge 145:64910690c574 484 base->TCD[channel].CSR = (base->TCD[channel].CSR & (~DMA_CSR_DREQ_MASK)) | DMA_CSR_DREQ(enable);
AnnaBridge 145:64910690c574 485 }
AnnaBridge 145:64910690c574 486
AnnaBridge 145:64910690c574 487 /*!
AnnaBridge 145:64910690c574 488 * @brief Enables the interrupt source for the eDMA transfer.
AnnaBridge 145:64910690c574 489 *
AnnaBridge 145:64910690c574 490 * @param base eDMA peripheral base address.
AnnaBridge 145:64910690c574 491 * @param channel eDMA channel number.
AnnaBridge 145:64910690c574 492 * @param mask The mask of interrupt source to be set. Users need to use
AnnaBridge 145:64910690c574 493 * the defined edma_interrupt_enable_t type.
AnnaBridge 145:64910690c574 494 */
AnnaBridge 145:64910690c574 495 void EDMA_EnableChannelInterrupts(DMA_Type *base, uint32_t channel, uint32_t mask);
AnnaBridge 145:64910690c574 496
AnnaBridge 145:64910690c574 497 /*!
AnnaBridge 145:64910690c574 498 * @brief Disables the interrupt source for the eDMA transfer.
AnnaBridge 145:64910690c574 499 *
AnnaBridge 145:64910690c574 500 * @param base eDMA peripheral base address.
AnnaBridge 145:64910690c574 501 * @param channel eDMA channel number.
AnnaBridge 145:64910690c574 502 * @param mask The mask of interrupt source to be set. Use
AnnaBridge 145:64910690c574 503 * the defined edma_interrupt_enable_t type.
AnnaBridge 145:64910690c574 504 */
AnnaBridge 145:64910690c574 505 void EDMA_DisableChannelInterrupts(DMA_Type *base, uint32_t channel, uint32_t mask);
AnnaBridge 145:64910690c574 506
AnnaBridge 145:64910690c574 507 /* @} */
AnnaBridge 145:64910690c574 508 /*!
AnnaBridge 145:64910690c574 509 * @name eDMA TCD Operation
AnnaBridge 145:64910690c574 510 * @{
AnnaBridge 145:64910690c574 511 */
AnnaBridge 145:64910690c574 512
AnnaBridge 145:64910690c574 513 /*!
AnnaBridge 145:64910690c574 514 * @brief Sets all fields to default values for the TCD structure.
AnnaBridge 145:64910690c574 515 *
AnnaBridge 145:64910690c574 516 * This function sets all fields for this TCD structure to default value.
AnnaBridge 145:64910690c574 517 *
AnnaBridge 145:64910690c574 518 * @param tcd Pointer to the TCD structure.
AnnaBridge 145:64910690c574 519 * @note This function enables the auto stop request feature.
AnnaBridge 145:64910690c574 520 */
AnnaBridge 145:64910690c574 521 void EDMA_TcdReset(edma_tcd_t *tcd);
AnnaBridge 145:64910690c574 522
AnnaBridge 145:64910690c574 523 /*!
AnnaBridge 145:64910690c574 524 * @brief Configures the eDMA TCD transfer attribute.
AnnaBridge 145:64910690c574 525 *
AnnaBridge 145:64910690c574 526 * TCD is a transfer control descriptor. The content of the TCD is the same as hardware TCD registers.
AnnaBridge 145:64910690c574 527 * STCD is used in scatter-gather mode.
AnnaBridge 145:64910690c574 528 * This function configures the TCD transfer attribute, including source address, destination address,
AnnaBridge 145:64910690c574 529 * transfer size, address offset, and so on. It also configures the scatter gather feature if the
AnnaBridge 145:64910690c574 530 * user supplies the next TCD address.
AnnaBridge 145:64910690c574 531 * Example:
AnnaBridge 145:64910690c574 532 * @code
AnnaBridge 145:64910690c574 533 * edma_transfer_t config = {
AnnaBridge 145:64910690c574 534 * ...
AnnaBridge 145:64910690c574 535 * }
AnnaBridge 145:64910690c574 536 * edma_tcd_t tcd __aligned(32);
AnnaBridge 145:64910690c574 537 * edma_tcd_t nextTcd __aligned(32);
AnnaBridge 145:64910690c574 538 * EDMA_TcdSetTransferConfig(&tcd, &config, &nextTcd);
AnnaBridge 145:64910690c574 539 * @endcode
AnnaBridge 145:64910690c574 540 *
AnnaBridge 145:64910690c574 541 * @param tcd Pointer to the TCD structure.
AnnaBridge 145:64910690c574 542 * @param config Pointer to eDMA transfer configuration structure.
AnnaBridge 145:64910690c574 543 * @param nextTcd Pointer to the next TCD structure. It can be NULL if users
AnnaBridge 145:64910690c574 544 * do not want to enable scatter/gather feature.
AnnaBridge 145:64910690c574 545 * @note TCD address should be 32 bytes aligned, or it causes an eDMA error.
AnnaBridge 145:64910690c574 546 * @note If the nextTcd is not NULL, the scatter gather feature is enabled
AnnaBridge 145:64910690c574 547 * and DREQ bit is cleared in the previous transfer configuration, which
AnnaBridge 145:64910690c574 548 * is set in the EDMA_TcdReset.
AnnaBridge 145:64910690c574 549 */
AnnaBridge 145:64910690c574 550 void EDMA_TcdSetTransferConfig(edma_tcd_t *tcd, const edma_transfer_config_t *config, edma_tcd_t *nextTcd);
AnnaBridge 145:64910690c574 551
AnnaBridge 145:64910690c574 552 /*!
AnnaBridge 145:64910690c574 553 * @brief Configures the eDMA TCD minor offset feature.
AnnaBridge 145:64910690c574 554 *
AnnaBridge 145:64910690c574 555 * Minor offset is a signed-extended value added to the source address or destination
AnnaBridge 145:64910690c574 556 * address after each minor loop.
AnnaBridge 145:64910690c574 557 *
AnnaBridge 145:64910690c574 558 * @param tcd Point to the TCD structure.
AnnaBridge 145:64910690c574 559 * @param config Pointer to Minor offset configuration structure.
AnnaBridge 145:64910690c574 560 */
AnnaBridge 145:64910690c574 561 void EDMA_TcdSetMinorOffsetConfig(edma_tcd_t *tcd, const edma_minor_offset_config_t *config);
AnnaBridge 145:64910690c574 562
AnnaBridge 145:64910690c574 563 /*!
AnnaBridge 145:64910690c574 564 * @brief Sets the channel link for eDMA TCD.
AnnaBridge 145:64910690c574 565 *
AnnaBridge 145:64910690c574 566 * This function configures either a minor link or a major link. The minor link means the channel link is
AnnaBridge 145:64910690c574 567 * triggered every time CITER decreases by 1. The major link means that the channel link is triggered when the CITER is
AnnaBridge 145:64910690c574 568 * exhausted.
AnnaBridge 145:64910690c574 569 *
AnnaBridge 145:64910690c574 570 * @note Users should ensure that DONE flag is cleared before calling this interface, or the configuration is invalid.
AnnaBridge 145:64910690c574 571 * @param tcd Point to the TCD structure.
AnnaBridge 145:64910690c574 572 * @param type Channel link type, it can be one of:
AnnaBridge 145:64910690c574 573 * @arg kEDMA_LinkNone
AnnaBridge 145:64910690c574 574 * @arg kEDMA_MinorLink
AnnaBridge 145:64910690c574 575 * @arg kEDMA_MajorLink
AnnaBridge 145:64910690c574 576 * @param linkedChannel The linked channel number.
AnnaBridge 145:64910690c574 577 */
AnnaBridge 145:64910690c574 578 void EDMA_TcdSetChannelLink(edma_tcd_t *tcd, edma_channel_link_type_t type, uint32_t linkedChannel);
AnnaBridge 145:64910690c574 579
AnnaBridge 145:64910690c574 580 /*!
AnnaBridge 145:64910690c574 581 * @brief Sets the bandwidth for the eDMA TCD.
AnnaBridge 145:64910690c574 582 *
AnnaBridge 145:64910690c574 583 * In general, because the eDMA processes the minor loop, it continuously generates read/write sequences
AnnaBridge 145:64910690c574 584 * until the minor count is exhausted. Bandwidth forces the eDMA to stall after the completion of
AnnaBridge 145:64910690c574 585 * each read/write access to control the bus request bandwidth seen by the crossbar switch.
AnnaBridge 145:64910690c574 586 * @param tcd Point to the TCD structure.
AnnaBridge 145:64910690c574 587 * @param bandWidth Bandwidth setting, it can be one of:
AnnaBridge 145:64910690c574 588 * @arg kEDMABandwidthStallNone
AnnaBridge 145:64910690c574 589 * @arg kEDMABandwidthStall4Cycle
AnnaBridge 145:64910690c574 590 * @arg kEDMABandwidthStall8Cycle
AnnaBridge 145:64910690c574 591 */
AnnaBridge 145:64910690c574 592 static inline void EDMA_TcdSetBandWidth(edma_tcd_t *tcd, edma_bandwidth_t bandWidth)
AnnaBridge 145:64910690c574 593 {
AnnaBridge 145:64910690c574 594 assert(tcd != NULL);
AnnaBridge 145:64910690c574 595 assert(((uint32_t)tcd & 0x1FU) == 0);
AnnaBridge 145:64910690c574 596
AnnaBridge 145:64910690c574 597 tcd->CSR = (tcd->CSR & (~DMA_CSR_BWC_MASK)) | DMA_CSR_BWC(bandWidth);
AnnaBridge 145:64910690c574 598 }
AnnaBridge 145:64910690c574 599
AnnaBridge 145:64910690c574 600 /*!
AnnaBridge 145:64910690c574 601 * @brief Sets the source modulo and destination modulo for eDMA TCD.
AnnaBridge 145:64910690c574 602 *
AnnaBridge 145:64910690c574 603 * This function defines a specific address range specified to be the value after (SADDR + SOFF)/(DADDR + DOFF)
AnnaBridge 145:64910690c574 604 * calculation is performed or the original register value. It provides the ability to implement a circular data
AnnaBridge 145:64910690c574 605 * queue easily.
AnnaBridge 145:64910690c574 606 *
AnnaBridge 145:64910690c574 607 * @param tcd Point to the TCD structure.
AnnaBridge 145:64910690c574 608 * @param srcModulo Source modulo value.
AnnaBridge 145:64910690c574 609 * @param destModulo Destination modulo value.
AnnaBridge 145:64910690c574 610 */
AnnaBridge 145:64910690c574 611 void EDMA_TcdSetModulo(edma_tcd_t *tcd, edma_modulo_t srcModulo, edma_modulo_t destModulo);
AnnaBridge 145:64910690c574 612
AnnaBridge 145:64910690c574 613 /*!
AnnaBridge 145:64910690c574 614 * @brief Sets the auto stop request for the eDMA TCD.
AnnaBridge 145:64910690c574 615 *
AnnaBridge 145:64910690c574 616 * If enabling the auto stop request, the eDMA hardware automatically disables the hardware channel request.
AnnaBridge 145:64910690c574 617 *
AnnaBridge 145:64910690c574 618 * @param tcd Point to the TCD structure.
AnnaBridge 145:64910690c574 619 * @param enable The command for enable(ture) or disable(false).
AnnaBridge 145:64910690c574 620 */
AnnaBridge 145:64910690c574 621 static inline void EDMA_TcdEnableAutoStopRequest(edma_tcd_t *tcd, bool enable)
AnnaBridge 145:64910690c574 622 {
AnnaBridge 145:64910690c574 623 assert(tcd != NULL);
AnnaBridge 145:64910690c574 624 assert(((uint32_t)tcd & 0x1FU) == 0);
AnnaBridge 145:64910690c574 625
AnnaBridge 145:64910690c574 626 tcd->CSR = (tcd->CSR & (~DMA_CSR_DREQ_MASK)) | DMA_CSR_DREQ(enable);
AnnaBridge 145:64910690c574 627 }
AnnaBridge 145:64910690c574 628
AnnaBridge 145:64910690c574 629 /*!
AnnaBridge 145:64910690c574 630 * @brief Enables the interrupt source for the eDMA TCD.
AnnaBridge 145:64910690c574 631 *
AnnaBridge 145:64910690c574 632 * @param tcd Point to the TCD structure.
AnnaBridge 145:64910690c574 633 * @param mask The mask of interrupt source to be set. Users need to use
AnnaBridge 145:64910690c574 634 * the defined edma_interrupt_enable_t type.
AnnaBridge 145:64910690c574 635 */
AnnaBridge 145:64910690c574 636 void EDMA_TcdEnableInterrupts(edma_tcd_t *tcd, uint32_t mask);
AnnaBridge 145:64910690c574 637
AnnaBridge 145:64910690c574 638 /*!
AnnaBridge 145:64910690c574 639 * @brief Disables the interrupt source for the eDMA TCD.
AnnaBridge 145:64910690c574 640 *
AnnaBridge 145:64910690c574 641 * @param tcd Point to the TCD structure.
AnnaBridge 145:64910690c574 642 * @param mask The mask of interrupt source to be set. Users need to use
AnnaBridge 145:64910690c574 643 * the defined edma_interrupt_enable_t type.
AnnaBridge 145:64910690c574 644 */
AnnaBridge 145:64910690c574 645 void EDMA_TcdDisableInterrupts(edma_tcd_t *tcd, uint32_t mask);
AnnaBridge 145:64910690c574 646
AnnaBridge 145:64910690c574 647 /*! @} */
AnnaBridge 145:64910690c574 648 /*!
AnnaBridge 145:64910690c574 649 * @name eDMA Channel Transfer Operation
AnnaBridge 145:64910690c574 650 * @{
AnnaBridge 145:64910690c574 651 */
AnnaBridge 145:64910690c574 652
AnnaBridge 145:64910690c574 653 /*!
AnnaBridge 145:64910690c574 654 * @brief Enables the eDMA hardware channel request.
AnnaBridge 145:64910690c574 655 *
AnnaBridge 145:64910690c574 656 * This function enables the hardware channel request.
AnnaBridge 145:64910690c574 657 *
AnnaBridge 145:64910690c574 658 * @param base eDMA peripheral base address.
AnnaBridge 145:64910690c574 659 * @param channel eDMA channel number.
AnnaBridge 145:64910690c574 660 */
AnnaBridge 145:64910690c574 661 static inline void EDMA_EnableChannelRequest(DMA_Type *base, uint32_t channel)
AnnaBridge 145:64910690c574 662 {
AnnaBridge 145:64910690c574 663 assert(channel < FSL_FEATURE_DMAMUX_MODULE_CHANNEL);
AnnaBridge 145:64910690c574 664
AnnaBridge 145:64910690c574 665 base->SERQ = DMA_SERQ_SERQ(channel);
AnnaBridge 145:64910690c574 666 }
AnnaBridge 145:64910690c574 667
AnnaBridge 145:64910690c574 668 /*!
AnnaBridge 145:64910690c574 669 * @brief Disables the eDMA hardware channel request.
AnnaBridge 145:64910690c574 670 *
AnnaBridge 145:64910690c574 671 * This function disables the hardware channel request.
AnnaBridge 145:64910690c574 672 *
AnnaBridge 145:64910690c574 673 * @param base eDMA peripheral base address.
AnnaBridge 145:64910690c574 674 * @param channel eDMA channel number.
AnnaBridge 145:64910690c574 675 */
AnnaBridge 145:64910690c574 676 static inline void EDMA_DisableChannelRequest(DMA_Type *base, uint32_t channel)
AnnaBridge 145:64910690c574 677 {
AnnaBridge 145:64910690c574 678 assert(channel < FSL_FEATURE_DMAMUX_MODULE_CHANNEL);
AnnaBridge 145:64910690c574 679
AnnaBridge 145:64910690c574 680 base->CERQ = DMA_CERQ_CERQ(channel);
AnnaBridge 145:64910690c574 681 }
AnnaBridge 145:64910690c574 682
AnnaBridge 145:64910690c574 683 /*!
AnnaBridge 145:64910690c574 684 * @brief Starts the eDMA transfer by software trigger.
AnnaBridge 145:64910690c574 685 *
AnnaBridge 145:64910690c574 686 * This function starts a minor loop transfer.
AnnaBridge 145:64910690c574 687 *
AnnaBridge 145:64910690c574 688 * @param base eDMA peripheral base address.
AnnaBridge 145:64910690c574 689 * @param channel eDMA channel number.
AnnaBridge 145:64910690c574 690 */
AnnaBridge 145:64910690c574 691 static inline void EDMA_TriggerChannelStart(DMA_Type *base, uint32_t channel)
AnnaBridge 145:64910690c574 692 {
AnnaBridge 145:64910690c574 693 assert(channel < FSL_FEATURE_DMAMUX_MODULE_CHANNEL);
AnnaBridge 145:64910690c574 694
AnnaBridge 145:64910690c574 695 base->SSRT = DMA_SSRT_SSRT(channel);
AnnaBridge 145:64910690c574 696 }
AnnaBridge 145:64910690c574 697
AnnaBridge 145:64910690c574 698 /*! @} */
AnnaBridge 145:64910690c574 699 /*!
AnnaBridge 145:64910690c574 700 * @name eDMA Channel Status Operation
AnnaBridge 145:64910690c574 701 * @{
AnnaBridge 145:64910690c574 702 */
AnnaBridge 145:64910690c574 703
AnnaBridge 145:64910690c574 704 /*!
AnnaBridge 145:64910690c574 705 * @brief Gets the Remaining bytes from the eDMA current channel TCD.
AnnaBridge 145:64910690c574 706 *
AnnaBridge 145:64910690c574 707 * This function checks the TCD (Task Control Descriptor) status for a specified
AnnaBridge 145:64910690c574 708 * eDMA channel and returns the the number of bytes that have not finished.
AnnaBridge 145:64910690c574 709 *
AnnaBridge 145:64910690c574 710 * @param base eDMA peripheral base address.
AnnaBridge 145:64910690c574 711 * @param channel eDMA channel number.
AnnaBridge 145:64910690c574 712 * @return Bytes have not been transferred yet for the current TCD.
AnnaBridge 145:64910690c574 713 * @note This function can only be used to get unfinished bytes of transfer without
AnnaBridge 145:64910690c574 714 * the next TCD, or it might be inaccuracy.
AnnaBridge 145:64910690c574 715 */
AnnaBridge 145:64910690c574 716 uint32_t EDMA_GetRemainingBytes(DMA_Type *base, uint32_t channel);
AnnaBridge 145:64910690c574 717
AnnaBridge 145:64910690c574 718 /*!
AnnaBridge 145:64910690c574 719 * @brief Gets the eDMA channel error status flags.
AnnaBridge 145:64910690c574 720 *
AnnaBridge 145:64910690c574 721 * @param base eDMA peripheral base address.
AnnaBridge 145:64910690c574 722 * @return The mask of error status flags. Users need to use the
AnnaBridge 145:64910690c574 723 * _edma_error_status_flags type to decode the return variables.
AnnaBridge 145:64910690c574 724 */
AnnaBridge 145:64910690c574 725 static inline uint32_t EDMA_GetErrorStatusFlags(DMA_Type *base)
AnnaBridge 145:64910690c574 726 {
AnnaBridge 145:64910690c574 727 return base->ES;
AnnaBridge 145:64910690c574 728 }
AnnaBridge 145:64910690c574 729
AnnaBridge 145:64910690c574 730 /*!
AnnaBridge 145:64910690c574 731 * @brief Gets the eDMA channel status flags.
AnnaBridge 145:64910690c574 732 *
AnnaBridge 145:64910690c574 733 * @param base eDMA peripheral base address.
AnnaBridge 145:64910690c574 734 * @param channel eDMA channel number.
AnnaBridge 145:64910690c574 735 * @return The mask of channel status flags. Users need to use the
AnnaBridge 145:64910690c574 736 * _edma_channel_status_flags type to decode the return variables.
AnnaBridge 145:64910690c574 737 */
AnnaBridge 145:64910690c574 738 uint32_t EDMA_GetChannelStatusFlags(DMA_Type *base, uint32_t channel);
AnnaBridge 145:64910690c574 739
AnnaBridge 145:64910690c574 740 /*!
AnnaBridge 145:64910690c574 741 * @brief Clears the eDMA channel status flags.
AnnaBridge 145:64910690c574 742 *
AnnaBridge 145:64910690c574 743 * @param base eDMA peripheral base address.
AnnaBridge 145:64910690c574 744 * @param channel eDMA channel number.
AnnaBridge 145:64910690c574 745 * @param mask The mask of channel status to be cleared. Users need to use
AnnaBridge 145:64910690c574 746 * the defined _edma_channel_status_flags type.
AnnaBridge 145:64910690c574 747 */
AnnaBridge 145:64910690c574 748 void EDMA_ClearChannelStatusFlags(DMA_Type *base, uint32_t channel, uint32_t mask);
AnnaBridge 145:64910690c574 749
AnnaBridge 145:64910690c574 750 /*! @} */
AnnaBridge 145:64910690c574 751 /*!
AnnaBridge 145:64910690c574 752 * @name eDMA Transactional Operation
AnnaBridge 145:64910690c574 753 */
AnnaBridge 145:64910690c574 754
AnnaBridge 145:64910690c574 755 /*!
AnnaBridge 145:64910690c574 756 * @brief Creates the eDMA handle.
AnnaBridge 145:64910690c574 757 *
AnnaBridge 145:64910690c574 758 * This function is called if using transaction API for eDMA. This function
AnnaBridge 145:64910690c574 759 * initializes the internal state of eDMA handle.
AnnaBridge 145:64910690c574 760 *
AnnaBridge 145:64910690c574 761 * @param handle eDMA handle pointer. The eDMA handle stores callback function and
AnnaBridge 145:64910690c574 762 * parameters.
AnnaBridge 145:64910690c574 763 * @param base eDMA peripheral base address.
AnnaBridge 145:64910690c574 764 * @param channel eDMA channel number.
AnnaBridge 145:64910690c574 765 */
AnnaBridge 145:64910690c574 766 void EDMA_CreateHandle(edma_handle_t *handle, DMA_Type *base, uint32_t channel);
AnnaBridge 145:64910690c574 767
AnnaBridge 145:64910690c574 768 /*!
AnnaBridge 145:64910690c574 769 * @brief Installs the TCDs memory pool into eDMA handle.
AnnaBridge 145:64910690c574 770 *
AnnaBridge 145:64910690c574 771 * This function is called after the EDMA_CreateHandle to use scatter/gather feature.
AnnaBridge 145:64910690c574 772 *
AnnaBridge 145:64910690c574 773 * @param handle eDMA handle pointer.
AnnaBridge 145:64910690c574 774 * @param tcdPool Memory pool to store TCDs. It must be 32 bytes aligned.
AnnaBridge 145:64910690c574 775 * @param tcdSize The number of TCD slots.
AnnaBridge 145:64910690c574 776 */
AnnaBridge 145:64910690c574 777 void EDMA_InstallTCDMemory(edma_handle_t *handle, edma_tcd_t *tcdPool, uint32_t tcdSize);
AnnaBridge 145:64910690c574 778
AnnaBridge 145:64910690c574 779 /*!
AnnaBridge 145:64910690c574 780 * @brief Installs a callback function for the eDMA transfer.
AnnaBridge 145:64910690c574 781 *
AnnaBridge 145:64910690c574 782 * This callback is called in eDMA IRQ handler. Use the callback to do something after
AnnaBridge 145:64910690c574 783 * the current major loop transfer completes.
AnnaBridge 145:64910690c574 784 *
AnnaBridge 145:64910690c574 785 * @param handle eDMA handle pointer.
AnnaBridge 145:64910690c574 786 * @param callback eDMA callback function pointer.
AnnaBridge 145:64910690c574 787 * @param userData Parameter for callback function.
AnnaBridge 145:64910690c574 788 */
AnnaBridge 145:64910690c574 789 void EDMA_SetCallback(edma_handle_t *handle, edma_callback callback, void *userData);
AnnaBridge 145:64910690c574 790
AnnaBridge 145:64910690c574 791 /*!
AnnaBridge 145:64910690c574 792 * @brief Prepares the eDMA transfer structure.
AnnaBridge 145:64910690c574 793 *
AnnaBridge 145:64910690c574 794 * This function prepares the transfer configuration structure according to the user input.
AnnaBridge 145:64910690c574 795 *
AnnaBridge 145:64910690c574 796 * @param config The user configuration structure of type edma_transfer_t.
AnnaBridge 145:64910690c574 797 * @param srcAddr eDMA transfer source address.
AnnaBridge 145:64910690c574 798 * @param srcWidth eDMA transfer source address width(bytes).
AnnaBridge 145:64910690c574 799 * @param destAddr eDMA transfer destination address.
AnnaBridge 145:64910690c574 800 * @param destWidth eDMA transfer destination address width(bytes).
AnnaBridge 145:64910690c574 801 * @param bytesEachRequest eDMA transfer bytes per channel request.
AnnaBridge 145:64910690c574 802 * @param transferBytes eDMA transfer bytes to be transferred.
AnnaBridge 145:64910690c574 803 * @param type eDMA transfer type.
AnnaBridge 145:64910690c574 804 * @note The data address and the data width must be consistent. For example, if the SRC
AnnaBridge 145:64910690c574 805 * is 4 bytes, so the source address must be 4 bytes aligned, or it shall result in
AnnaBridge 145:64910690c574 806 * source address error(SAE).
AnnaBridge 145:64910690c574 807 */
AnnaBridge 145:64910690c574 808 void EDMA_PrepareTransfer(edma_transfer_config_t *config,
AnnaBridge 145:64910690c574 809 void *srcAddr,
AnnaBridge 145:64910690c574 810 uint32_t srcWidth,
AnnaBridge 145:64910690c574 811 void *destAddr,
AnnaBridge 145:64910690c574 812 uint32_t destWidth,
AnnaBridge 145:64910690c574 813 uint32_t bytesEachRequest,
AnnaBridge 145:64910690c574 814 uint32_t transferBytes,
AnnaBridge 145:64910690c574 815 edma_transfer_type_t type);
AnnaBridge 145:64910690c574 816
AnnaBridge 145:64910690c574 817 /*!
AnnaBridge 145:64910690c574 818 * @brief Submits the eDMA transfer request.
AnnaBridge 145:64910690c574 819 *
AnnaBridge 145:64910690c574 820 * This function submits the eDMA transfer request according to the transfer configuration structure.
AnnaBridge 145:64910690c574 821 * If the user submits the transfer request repeatedly, this function packs an unprocessed request as
AnnaBridge 145:64910690c574 822 * a TCD and enables scatter/gather feature to process it in the next time.
AnnaBridge 145:64910690c574 823 *
AnnaBridge 145:64910690c574 824 * @param handle eDMA handle pointer.
AnnaBridge 145:64910690c574 825 * @param config Pointer to eDMA transfer configuration structure.
AnnaBridge 145:64910690c574 826 * @retval kStatus_EDMA_Success It means submit transfer request succeed.
AnnaBridge 145:64910690c574 827 * @retval kStatus_EDMA_QueueFull It means TCD queue is full. Submit transfer request is not allowed.
AnnaBridge 145:64910690c574 828 * @retval kStatus_EDMA_Busy It means the given channel is busy, need to submit request later.
AnnaBridge 145:64910690c574 829 */
AnnaBridge 145:64910690c574 830 status_t EDMA_SubmitTransfer(edma_handle_t *handle, const edma_transfer_config_t *config);
AnnaBridge 145:64910690c574 831
AnnaBridge 145:64910690c574 832 /*!
AnnaBridge 145:64910690c574 833 * @brief eDMA start transfer.
AnnaBridge 145:64910690c574 834 *
AnnaBridge 145:64910690c574 835 * This function enables the channel request. Users can call this function after submitting the transfer request
AnnaBridge 145:64910690c574 836 * or before submitting the transfer request.
AnnaBridge 145:64910690c574 837 *
AnnaBridge 145:64910690c574 838 * @param handle eDMA handle pointer.
AnnaBridge 145:64910690c574 839 */
AnnaBridge 145:64910690c574 840 void EDMA_StartTransfer(edma_handle_t *handle);
AnnaBridge 145:64910690c574 841
AnnaBridge 145:64910690c574 842 /*!
AnnaBridge 145:64910690c574 843 * @brief eDMA stop transfer.
AnnaBridge 145:64910690c574 844 *
AnnaBridge 145:64910690c574 845 * This function disables the channel request to pause the transfer. Users can call EDMA_StartTransfer()
AnnaBridge 145:64910690c574 846 * again to resume the transfer.
AnnaBridge 145:64910690c574 847 *
AnnaBridge 145:64910690c574 848 * @param handle eDMA handle pointer.
AnnaBridge 145:64910690c574 849 */
AnnaBridge 145:64910690c574 850 void EDMA_StopTransfer(edma_handle_t *handle);
AnnaBridge 145:64910690c574 851
AnnaBridge 145:64910690c574 852 /*!
AnnaBridge 145:64910690c574 853 * @brief eDMA abort transfer.
AnnaBridge 145:64910690c574 854 *
AnnaBridge 145:64910690c574 855 * This function disables the channel request and clear transfer status bits.
AnnaBridge 145:64910690c574 856 * Users can submit another transfer after calling this API.
AnnaBridge 145:64910690c574 857 *
AnnaBridge 145:64910690c574 858 * @param handle DMA handle pointer.
AnnaBridge 145:64910690c574 859 */
AnnaBridge 145:64910690c574 860 void EDMA_AbortTransfer(edma_handle_t *handle);
AnnaBridge 145:64910690c574 861
AnnaBridge 145:64910690c574 862 /*!
AnnaBridge 145:64910690c574 863 * @brief eDMA IRQ handler for current major loop transfer complete.
AnnaBridge 145:64910690c574 864 *
AnnaBridge 145:64910690c574 865 * This function clears the channel major interrupt flag and call
AnnaBridge 145:64910690c574 866 * the callback function if it is not NULL.
AnnaBridge 145:64910690c574 867 *
AnnaBridge 145:64910690c574 868 * @param handle eDMA handle pointer.
AnnaBridge 145:64910690c574 869 */
AnnaBridge 145:64910690c574 870 void EDMA_HandleIRQ(edma_handle_t *handle);
AnnaBridge 145:64910690c574 871
AnnaBridge 145:64910690c574 872 /* @} */
AnnaBridge 145:64910690c574 873
AnnaBridge 145:64910690c574 874 #if defined(__cplusplus)
AnnaBridge 145:64910690c574 875 }
AnnaBridge 145:64910690c574 876 #endif /* __cplusplus */
AnnaBridge 145:64910690c574 877
AnnaBridge 145:64910690c574 878 /* @} */
AnnaBridge 145:64910690c574 879
AnnaBridge 145:64910690c574 880 #endif /*_FSL_EDMA_H_*/