File content as of revision 2:65228c367483:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#include "port_api.h"

namespace mbed {

PinName parse_pins(const char *str) {
#if defined(TARGET_LPC1768) || defined(TARGET_LPC11U24) || defined(TARGET_LPC2368)
    static const PinName pin_names[] = {p5, p6, p7, p8, p9, p10, p11, p12, p13, p14
                                , p15, p16, p17, p18, p19, p20, p21, p22, p23
                                , p24, p25, p26, p27, p28, p29, p30};
#endif

#if defined(TARGET_LPC1768) || defined(TARGET_LPC11U24) || defined(TARGET_LPC2368) || defined(TARGET_LPC812)
    if (str[0] == 'P') {              // Pn_n
        uint32_t port = str[1] - '0';
        uint32_t pin  = str[3] - '0'; // Pn_n
        uint32_t pin2 = str[4] - '0'; // Pn_nn
        if (pin2 <= 9) {
            pin = pin * 10 + pin2;
        }
        return port_pin((PortName)port, pin);

#elif defined(TARGET_KL25Z)
        if (str[0] == 'P' && str[1] == 'T') {   // PTx_n
            uint32_t port = str[2] - 'A';
            uint32_t pin  = str[3] - '0'; // PTxn
            uint32_t pin2 = str[4] - '0'; // PTxnn

            if (pin2 <= 9) {
                pin = pin * 10 + pin2;
            }
            return port_pin((PortName)port, pin);
#endif

#if defined(TARGET_LPC1768) || defined(TARGET_LPC11U24) || defined(TARGET_LPC2368)
    } else if (str[0] == 'p') {       // pn
        uint32_t pin  = str[1] - '0'; // pn
        uint32_t pin2 = str[2] - '0'; // pnn
        if (pin2 <= 9) {
            pin = pin * 10 + pin2;
        }
        if (pin < 5 || pin > 30) {
            return NC;
        }
        return pin_names[pin - 5];
#endif

    } else if (str[0] == 'L') {  // LEDn
        switch (str[3]) {
            case '1' : return LED1;
            case '2' : return LED2;
            case '3' : return LED3;
            case '4' : return LED4;
        }

    } else if (str[0] == 'U') {  // USB?X
        switch (str[3]) {
            case 'T' : return USBTX;
            case 'R' : return USBRX;
        }
    }

    return NC;
}

}