Diff: targets/TARGET_TOSHIBA/TARGET_TMPM3HQ/PinNames.h

Revision:

189:f392fc9709a3

diff -r bcfe06ba3d64 -r f392fc9709a3 targets/TARGET_TOSHIBA/TARGET_TMPM3HQ/PinNames.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_TOSHIBA/TARGET_TMPM3HQ/PinNames.h	Wed Feb 20 22:31:08 2019 +0000
@@ -0,0 +1,145 @@
+/* mbed Microcontroller Library
+ * (C)Copyright TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION 2018 All rights reserved
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT,
+    PIN_INOUT
+} PinDirection;
+
+typedef enum {
+    // TMPM3HQ Pin Names
+    PA0 = 0  << 3, PA1, PA2, PA3, PA4, PA5, PA6, PA7,
+    PB0 = 1  << 3, PB1, PB2, PB3, PB4, PB5, PB6, PB7,
+    PC0 = 2  << 3, PC1, PC2, PC3, PC4, PC5, PC6,
+    PD0 = 3  << 3, PD1, PD2, PD3, PD4, PD5,
+    PE0 = 4  << 3, PE1, PE2, PE3, PE4, PE5, PE6,
+    PF0 = 5  << 3, PF1, PF2, PF3, PF4, PF5, PF6, PF7,
+    PG0 = 6  << 3, PG1, PG2, PG3, PG4, PG5, PG6, PG7,
+    PH0 = 7  << 3, PH1, PH2, PH3, PH4, PH5, PH6, PH7,
+    PJ0 = 8  << 3, PJ1, PJ2, PJ3, PJ4, PJ5,
+    PK0 = 9  << 3, PK1, PK2, PK3, PK4, PK5, PK6, PK7,
+    PL0 = 10 << 3, PL1, PL2, PL3, PL4, PL5, PL6, PL7,
+    PM0 = 11 << 3, PM1, PM2, PM3, PM4, PM5, PM6, PM7,
+    PN0 = 12 << 3, PN1, PN2, PN3, PN4, PN5,
+    PP0 = 13 << 3, PP1, PP2, PP3, PP4, PP5, PP6, PP7,
+    PR0 = 14 << 3, PR1, PR2, PR3, PR4, PR5, PR6, PR7,
+    PT0 = 15 << 3, PT1, PT2, PT3, PT4, PT5, PT6, PT7,
+    PU0 = 16 << 3, PU1, PU2, PU3, PU4, PU5,
+    PV0 = 17 << 3, PV1, PV2, PV3, PV4, PV5, PV6, PV7,
+
+    // LED
+    LED1 = PK4,
+    LED2 = PK5,
+    LED3 = PK6,
+    LED4 = PK7,
+
+    // External data bus Pin Names
+    D0  = PV7,
+    D1  = PV6,
+    D2  = PC4,
+    D3  = PK2,
+    D4  = PC3,
+    D5  = PJ0,
+    D6  = PN0,
+    D7  = PM6,
+    D8  = PT0,
+    D9  = PG2,
+    D10 = PT1,
+    D11 = PT3,
+    D12 = PT4,
+    D13 = PT2,
+    D14 = PC1,
+    D15 = PC0,
+
+    // Analogue out pins
+    A0 = PF2,
+    A1 = PF3,
+    A2 = PF4,
+    A3 = PF5,
+    A4 = PF6,
+    A5 = PF7,
+
+    // DAC
+    DAC0 = PG0,
+    DAC1 = PG1,
+
+    // DAP_UART
+    USBTX      = PJ1,
+    USBRX      = PJ2,
+    MBEDIF_TXD = USBTX,
+    MBEDIF_RXD = USBRX,
+
+    // Push buttons
+    SW1 = PV0,
+    SW2 = PV1,
+    SW3 = PV2,
+    SW4 = PV3,
+
+    // Standardized button names
+    BUTTON1 = SW1,
+    BUTTON2 = SW2,
+    BUTTON3 = SW3,
+    BUTTON4 = SW4,
+
+    // TSPI2
+    MOSI = D11,
+    MISO = D12,
+    SCLK = D13,
+    CS   = D10,
+
+    // SD Shield TSPI2
+    SD_SEL  = CS,   // Chip select
+    SD_CLK  = SCLK, // SPI clock
+    SD_MISO = MISO, // Master in Salve out
+    SD_MOSI = MOSI, // Master out Salve in
+
+    // I2C pins
+    SDA     = D14,
+    SCL     = D15,
+    I2C_SDA = SDA,
+    I2C_SCL = SCL,
+
+    // Not connected
+    NC = (int)0xFFFFFFFF,
+} PinName;
+
+typedef enum {
+    PullUp = 0,
+    PullDown,
+    PullNone,
+    OpenDrain,
+    PullDefault
+} PinMode;
+
+typedef enum {
+    DISABLE = 0,
+    ENABLE
+} FunctionalState;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif