Diff: cmsis/BUILD/mbed/hal/flash_api.h

Revision:

189:f392fc9709a3

diff -r bcfe06ba3d64 -r f392fc9709a3 cmsis/BUILD/mbed/hal/flash_api.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/cmsis/BUILD/mbed/hal/flash_api.h	Wed Feb 20 22:31:08 2019 +0000
@@ -0,0 +1,138 @@
+/** \addtogroup hal */
+/** @{*/
+
+/* mbed Microcontroller Library
+ * Copyright (c) 2017 ARM Limited
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_FLASH_API_H
+#define MBED_FLASH_API_H
+
+#include "device.h"
+#include <stdint.h>
+
+#if DEVICE_FLASH
+
+#define MBED_FLASH_INVALID_SIZE     0xFFFFFFFF
+
+typedef struct flash_s flash_t;
+
+#if TARGET_FLASH_CMSIS_ALGO
+#include "flash_data.h"
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \defgroup flash_hal Flash HAL API
+ * @{
+ */
+
+/** Initialize the flash peripheral and the flash_t object
+ *
+ * @param obj The flash object
+ * @return 0 for success, -1 for error
+ */
+int32_t flash_init(flash_t *obj);
+
+/** Uninitialize the flash peripheral and the flash_t object
+ *
+ * @param obj The flash object
+ * @return 0 for success, -1 for error
+ */
+int32_t flash_free(flash_t *obj);
+
+/** Erase one sector starting at defined address
+ *
+ * The address should be at sector boundary. This function does not do any check for address alignments
+ * @param obj The flash object
+ * @param address The sector starting address
+ * @return 0 for success, -1 for error
+ */
+int32_t flash_erase_sector(flash_t *obj, uint32_t address);
+
+/** Read data starting at defined address
+ *
+ * This function has a WEAK implementation using memcpy for backwards compatibility.
+ * @param obj The flash object
+ * @param address Address to begin reading from
+ * @param data The buffer to read data into
+ * @param size The number of bytes to read
+ * @return 0 for success, -1 for error
+ */
+int32_t flash_read(flash_t *obj, uint32_t address, uint8_t *data, uint32_t size);
+
+/** Program pages starting at defined address
+ *
+ * The pages should not cross multiple sectors.
+ * This function does not do any check for address alignments or if size is aligned to a page size.
+ * @param obj The flash object
+ * @param address The sector starting address
+ * @param data The data buffer to be programmed
+ * @param size The number of bytes to program
+ * @return 0 for success, -1 for error
+ */
+int32_t flash_program_page(flash_t *obj, uint32_t address, const uint8_t *data, uint32_t size);
+
+/** Get sector size
+ *
+ * @param obj The flash object
+ * @param address The sector starting address
+ * @return The size of a sector
+ */
+uint32_t flash_get_sector_size(const flash_t *obj, uint32_t address);
+
+/** Get page size
+ *
+ * The page size defines the writable page size
+ * @param obj The flash object
+ * @return The size of a page
+ */
+uint32_t flash_get_page_size(const flash_t *obj);
+
+/** Get start address for the flash region
+ *
+ * @param obj The flash object
+ * @return The start address for the flash region
+ */
+uint32_t flash_get_start_address(const flash_t *obj);
+
+/** Get the flash region size
+ *
+ * @param obj The flash object
+ * @return The flash region size
+ */
+uint32_t flash_get_size(const flash_t *obj);
+
+/** Get the flash erase value
+ *
+ * @param obj The flash object
+ * @return The flash erase value
+ */
+uint8_t flash_get_erase_value(const flash_t *obj);
+
+/**@}*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif
+
+/** @}*/