Diff: cmsis/BUILD/mbed/drivers/RawSerial.h

Revision:

189:f392fc9709a3

diff -r bcfe06ba3d64 -r f392fc9709a3 cmsis/BUILD/mbed/drivers/RawSerial.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/cmsis/BUILD/mbed/drivers/RawSerial.h	Wed Feb 20 22:31:08 2019 +0000
@@ -0,0 +1,110 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_RAW_SERIAL_H
+#define MBED_RAW_SERIAL_H
+
+#include "platform/platform.h"
+
+#if DEVICE_SERIAL || defined(DOXYGEN_ONLY)
+
+#include "mbed_toolchain.h"
+#include "drivers/SerialBase.h"
+#include "hal/serial_api.h"
+#include "platform/NonCopyable.h"
+
+namespace mbed {
+/** \addtogroup drivers */
+
+/** A serial port (UART) for communication with other serial devices
+ * This is a variation of the Serial class that doesn't use streams,
+ * thus making it safe to use in interrupt handlers with the RTOS.
+ *
+ * Can be used for Full Duplex communication, or Simplex by specifying
+ * one pin as NC (Not Connected)
+ *
+ * @note Synchronization level: Not protected
+ *
+ * Example:
+ * @code
+ * // Send a char to the PC
+ *
+ * #include "mbed.h"
+ *
+ * RawSerial pc(USBTX, USBRX);
+ *
+ * int main() {
+ *     pc.putc('A');
+ * }
+ * @endcode
+ * @ingroup drivers
+ */
+class RawSerial: public SerialBase, private NonCopyable<RawSerial> {
+
+public:
+    /** Create a RawSerial port, connected to the specified transmit and receive pins, with the specified baud.
+     *
+     *  @param tx Transmit pin
+     *  @param rx Receive pin
+     *  @param baud The baud rate of the serial port (optional, defaults to MBED_CONF_PLATFORM_DEFAULT_SERIAL_BAUD_RATE)
+     *
+     *  @note
+     *    Either tx or rx may be specified as NC if unused
+     */
+    RawSerial(PinName tx, PinName rx, int baud = MBED_CONF_PLATFORM_DEFAULT_SERIAL_BAUD_RATE);
+
+    /** Write a char to the serial port
+     *
+     * @param c The char to write
+     *
+     * @returns The written char or -1 if an error occurred
+     */
+    int putc(int c);
+
+    /** Read a char from the serial port
+     *
+     * @returns The char read from the serial port
+     */
+    int getc();
+
+    /** Write a string to the serial port
+     *
+     * @param str The string to write
+     *
+     * @returns 0 if the write succeeds, EOF for error
+     */
+    int puts(const char *str);
+
+    int printf(const char *format, ...) MBED_PRINTF_METHOD(1, 2);
+
+#if !(DOXYGEN_ONLY)
+protected:
+
+    /* Acquire exclusive access to this serial port
+     */
+    virtual void lock(void);
+
+    /* Release exclusive access to this serial port
+     */
+    virtual void unlock(void);
+#endif
+};
+
+} // namespace mbed
+
+#endif
+
+#endif