Diff: targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L476xG/TARGET_NUCLEO_L476RG/system_clock.c

Revision:

188:bcfe06ba3d64

Parent:

187:0387e8f68319

diff -r 0387e8f68319 -r bcfe06ba3d64 targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L476xG/TARGET_NUCLEO_L476RG/system_clock.c
--- a/targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L476xG/TARGET_NUCLEO_L476RG/system_clock.c	Thu Sep 06 13:40:20 2018 +0100
+++ b/targets/TARGET_STM/TARGET_STM32L4/TARGET_STM32L476xG/TARGET_NUCLEO_L476RG/system_clock.c	Thu Nov 08 11:46:34 2018 +0000
@@ -309,15 +309,19 @@
     RCC_OscInitTypeDef RCC_OscInitStruct = {0};
     RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {0};
 
+#if MBED_CONF_TARGET_LSE_AVAILABLE
     // Enable LSE Oscillator to automatically calibrate the MSI clock
     RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
     RCC_OscInitStruct.PLL.PLLState   = RCC_PLL_NONE; // No PLL update
     RCC_OscInitStruct.LSEState       = RCC_LSE_ON; // External 32.768 kHz clock on OSC_IN/OSC_OUT
-    if (HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) {
-        RCC->CR |= RCC_CR_MSIPLLEN; // Enable MSI PLL-mode
+    if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
+        return 0; // FAIL
     }
 
+    /* Enable the CSS interrupt in case LSE signal is corrupted or not present */
     HAL_RCCEx_DisableLSECSS();
+#endif /* MBED_CONF_TARGET_LSE_AVAILABLE */
+
     /* Enable MSI Oscillator and activate PLL with MSI as source */
     RCC_OscInitStruct.OscillatorType      = RCC_OSCILLATORTYPE_MSI | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_HSE;
     RCC_OscInitStruct.MSIState             = RCC_MSI_ON;
@@ -336,8 +340,12 @@
     if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
         return 0; // FAIL
     }
+
+#if MBED_CONF_TARGET_LSE_AVAILABLE
     /* Enable MSI Auto-calibration through LSE */
     HAL_RCCEx_EnableMSIPLLMode();
+#endif /* MBED_CONF_TARGET_LSE_AVAILABLE */
+
     /* Select MSI output as USB clock source */
     PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USB;
     PeriphClkInitStruct.UsbClockSelection = RCC_USBCLKSOURCE_MSI; /* 48 MHz */