mbed library sources. Supersedes mbed-src.
Dependents: Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more
targets/TARGET_STM/TARGET_STM32L4/TARGET_DISCO_L476VG/PinNames.h
- Committer:
- <>
- Date:
- 2016-10-28
- Revision:
- 149:156823d33999
- Child:
- 157:ff67d9f36b67
File content as of revision 149:156823d33999:
/* mbed Microcontroller Library ******************************************************************************* * Copyright (c) 2016, STMicroelectronics * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************* */ #ifndef MBED_PINNAMES_H #define MBED_PINNAMES_H #include "cmsis.h" #ifdef __cplusplus extern "C" { #endif #define STM_PIN_DATA(MODE, PUPD, AFNUM) ((int)(((MODE & 0x0F) << 0) |\ ((PUPD & 0x07) << 4) |\ ((AFNUM & 0x0F) << 7))) #define STM_PIN_DATA_EXT(MODE, PUPD, AFNUM, CHANNEL, INVERTED) ((int)(((MODE & 0x0F) << 0) |\ ((PUPD & 0x07) << 4) |\ ((AFNUM & 0x0F) << 7) |\ ((CHANNEL & 0x1F) << 11) |\ ((INVERTED & 0x01) << 16))) #define STM_PIN_MODE(X) (((X) >> 0) & 0x0F) #define STM_PIN_PUPD(X) (((X) >> 4) & 0x07) #define STM_PIN_AFNUM(X) (((X) >> 7) & 0x0F) #define STM_PIN_CHANNEL(X) (((X) >> 11) & 0x1F) #define STM_PIN_INVERTED(X) (((X) >> 16) & 0x01) #define STM_MODE_INPUT (0) #define STM_MODE_OUTPUT_PP (1) #define STM_MODE_OUTPUT_OD (2) #define STM_MODE_AF_PP (3) #define STM_MODE_AF_OD (4) #define STM_MODE_ANALOG (5) #define STM_MODE_ANALOG_ADC_CONTROL (6) #define STM_MODE_IT_RISING (7) #define STM_MODE_IT_FALLING (8) #define STM_MODE_IT_RISING_FALLING (9) #define STM_MODE_EVT_RISING (10) #define STM_MODE_EVT_FALLING (11) #define STM_MODE_EVT_RISING_FALLING (12) #define STM_MODE_IT_EVT_RESET (13) // High nibble = port number (0=A, 1=B, 2=C, 3=D, 4=E, 5=F, 6=G, 7=H) // Low nibble = pin number #define STM_PORT(X) (((uint32_t)(X) >> 4) & 0xF) #define STM_PIN(X) ((uint32_t)(X) & 0xF) typedef enum { PIN_INPUT, PIN_OUTPUT } PinDirection; typedef enum { PA_0 = 0x00, // On P1/P2 connectors PA_1 = 0x01, // On P1/P2 connectors PA_2 = 0x02, // On P1/P2 connectors PA_3 = 0x03, // On P1/P2 connectors PA_4 = 0x04, PA_5 = 0x05, // On P1/P2 connectors PA_6 = 0x06, PA_7 = 0x07, PA_8 = 0x08, PA_9 = 0x09, PA_10 = 0x0A, PA_11 = 0x0B, PA_12 = 0x0C, PA_13 = 0x0D, PA_14 = 0x0E, PA_15 = 0x0F, PB_0 = 0x10, PB_1 = 0x11, PB_2 = 0x12, // On P1/P2 connectors PB_3 = 0x13, // On P1/P2 connectors PB_4 = 0x14, PB_5 = 0x15, PB_6 = 0x16, PB_7 = 0x17, PB_8 = 0x18, // On P1/P2 connectors PB_9 = 0x19, // On P1/P2 connectors PB_10 = 0x1A, PB_11 = 0x1B, PB_12 = 0x1C, PB_13 = 0x1D, PB_14 = 0x1E, PB_15 = 0x1F, PC_0 = 0x20, PC_1 = 0x21, PC_2 = 0x22, PC_3 = 0x23, PC_4 = 0x24, PC_5 = 0x25, PC_6 = 0x26, PC_7 = 0x27, PC_8 = 0x28, PC_9 = 0x29, PC_10 = 0x2A, PC_11 = 0x2B, PC_12 = 0x2C, PC_13 = 0x2D, PC_14 = 0x2E, // On P1/P2 connectors PC_15 = 0x2F, // On P1/P2 connectors PD_0 = 0x30, // On P1/P2 connectors PD_1 = 0x31, PD_2 = 0x32, PD_3 = 0x33, PD_4 = 0x34, PD_5 = 0x35, PD_6 = 0x36, PD_7 = 0x37, PD_8 = 0x38, PD_9 = 0x39, PD_10 = 0x3A, PD_11 = 0x3B, PD_12 = 0x3C, PD_13 = 0x3D, PD_14 = 0x3E, PD_15 = 0x3F, PE_0 = 0x40, PE_1 = 0x41, PE_2 = 0x42, PE_3 = 0x43, PE_4 = 0x44, PE_5 = 0x45, PE_6 = 0x46, PE_7 = 0x47, PE_8 = 0x48, // On P1/P2 connectors PE_9 = 0x49, PE_10 = 0x4A, // On P1/P2 connectors PE_11 = 0x4B, // On P1/P2 connectors PE_12 = 0x4C, // On P1/P2 connectors PE_13 = 0x4D, // On P1/P2 connectors PE_14 = 0x4E, // On P1/P2 connectors PE_15 = 0x4F, // On P1/P2 connectors PH_0 = 0x70, // On P1/P2 connectors PH_1 = 0x71, // On P1/P2 connectors // ADC internal channels ADC_TEMP = 0xF0, ADC_VREF = 0xF1, ADC_VBAT = 0xF2, // Generic signals namings LED1 = PE_8, // LD5 Green LED2 = PB_2, // LD4 Red LED3 = LED1, LED4 = LED2, JOYSTICK_CENTER = PA_0, JOYSTICK_LEFT = PA_1, JOYSTICK_RIGHT = PA_2, JOYSTICK_UP = PA_3, JOYSTICK_DOWN = PA_5, USER_BUTTON = JOYSTICK_CENTER, SERIAL_TX = PD_5, SERIAL_RX = PD_6, USBTX = PD_5, USBRX = PD_6, I2C_SCL = PB_8, I2C_SDA = PB_9, SPI_MOSI = PA_7, SPI_MISO = PA_6, SPI_SCK = PA_5, SPI_CS = PA_4, PWM_OUT = PB_3, // Not connected NC = (int)0xFFFFFFFF } PinName; typedef enum { PullNone = 0, PullUp = 1, PullDown = 2, OpenDrain = 3, PullDefault = PullNone } PinMode; #ifdef __cplusplus } #endif #endif