Diff: cmsis/BUILD/mbed/hal/itm_api.h

Revision:

189:f392fc9709a3

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/cmsis/BUILD/mbed/hal/itm_api.h	Wed Feb 20 22:31:08 2019 +0000
@@ -0,0 +1,103 @@
+/** \addtogroup hal */
+/** @{*/
+/* mbed Microcontroller Library
+ * Copyright (c) 2017 ARM Limited
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef MBED_ITM_API_H
+#define MBED_ITM_API_H
+
+#if DEVICE_ITM
+
+#include <stdint.h>
+#include <stddef.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \defgroup itm_hal Instrumented Trace Macrocell HAL API
+ * @{
+ */
+
+enum {
+    ITM_PORT_SWO = 0
+};
+
+/**
+ * @brief      Target specific initialization function.
+ *             This function is responsible for initializing and configuring
+ *             the debug clock for the ITM and setting up the SWO pin for
+ *             debug output.
+ *
+ *             The only Cortex-M register that should be modified is the clock
+ *             prescaler in TPI->ACPR.
+ *
+ *             The generic mbed_itm_init initialization function will setup:
+ *
+ *                  ITM->LAR
+ *                  ITM->TPR
+ *                  ITM->TCR
+ *                  ITM->TER
+ *                  TPI->SPPR
+ *                  TPI->FFCR
+ *                  DWT->CTRL
+ *
+ *             for SWO output on stimulus port 0.
+ */
+void itm_init(void);
+
+/**
+ * @brief      Initialization function for both generic registers and target specific clock and pin.
+ */
+void mbed_itm_init(void);
+
+/**
+ * @brief      Send data over ITM stimulus port.
+ *
+ * @param[in]  port  The stimulus port to send data over.
+ * @param[in]  data  The 32-bit data to send.
+ *
+ * The data is written as a single 32-bit write to the port.
+ *
+ * @return     value of data sent.
+ */
+uint32_t mbed_itm_send(uint32_t port, uint32_t data);
+
+/**
+ * @brief      Send a block of data over ITM stimulus port.
+ *
+ * @param[in]  port  The stimulus port to send data over.
+ * @param[in]  data  The block of data to send.
+ * @param[in]  len   The number of bytes of data to send.
+ *
+ * The data is written using multiple appropriately-sized port accesses for
+ * efficient transfer.
+ */
+void mbed_itm_send_block(uint32_t port, const void *data, size_t len);
+
+/**@}*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+
+#endif /* MBED_ITM_API_H */
+
+/**@}*/