Diff: cmsis/BUILD/mbed/drivers/InterruptIn.h

Revision:

189:f392fc9709a3

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/cmsis/BUILD/mbed/drivers/InterruptIn.h	Wed Feb 20 22:31:08 2019 +0000
@@ -0,0 +1,182 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_INTERRUPTIN_H
+#define MBED_INTERRUPTIN_H
+
+#include "platform/platform.h"
+
+#if DEVICE_INTERRUPTIN || defined(DOXYGEN_ONLY)
+
+#include "hal/gpio_api.h"
+#include "hal/gpio_irq_api.h"
+#include "platform/Callback.h"
+#include "platform/mbed_critical.h"
+#include "platform/mbed_toolchain.h"
+#include "platform/NonCopyable.h"
+
+namespace mbed {
+/** \addtogroup drivers */
+
+/** A digital interrupt input, used to call a function on a rising or falling edge
+ *
+ * @note Synchronization level: Interrupt safe
+ *
+ * Example:
+ * @code
+ * // Flash an LED while waiting for events
+ *
+ * #include "mbed.h"
+ *
+ * InterruptIn event(p16);
+ * DigitalOut led(LED1);
+ *
+ * void trigger() {
+ *     printf("triggered!\n");
+ * }
+ *
+ * int main() {
+ *     // register trigger() to be called upon the rising edge of event
+ *     event.rise(&trigger);
+ *     while(1) {
+ *         led = !led;
+ *         wait(0.25);
+ *     }
+ * }
+ * @endcode
+ * @ingroup drivers
+ */
+class InterruptIn : private NonCopyable<InterruptIn> {
+
+public:
+
+    /** Create an InterruptIn connected to the specified pin
+     *
+     *  @param pin InterruptIn pin to connect to
+     */
+    InterruptIn(PinName pin);
+
+    /** Create an InterruptIn connected to the specified pin,
+     *  and the pin configured to the specified mode.
+     *
+     *  @param pin InterruptIn pin to connect to
+     *  @param mode Desired Pin mode configuration.
+     *  (Valid values could be PullNone, PullDown, PullUp and PullDefault.
+     *  See PinNames.h for your target for definitions)
+     *
+     */
+    InterruptIn(PinName pin, PinMode mode);
+
+    virtual ~InterruptIn();
+
+    /** Read the input, represented as 0 or 1 (int)
+     *
+     *  @returns
+     *    An integer representing the state of the input pin,
+     *    0 for logical 0, 1 for logical 1
+     */
+    int read();
+
+    /** An operator shorthand for read()
+     */
+    operator int();
+
+
+    /** Attach a function to call when a rising edge occurs on the input
+     *
+     *  @param func A pointer to a void function, or 0 to set as none
+     */
+    void rise(Callback<void()> func);
+
+    /** Attach a member function to call when a rising edge occurs on the input
+     *
+     *  @param obj pointer to the object to call the member function on
+     *  @param method pointer to the member function to be called
+     *  @deprecated
+     *      The rise function does not support cv-qualifiers. Replaced by
+     *      rise(callback(obj, method)).
+     */
+    template<typename T, typename M>
+    MBED_DEPRECATED_SINCE("mbed-os-5.1",
+                          "The rise function does not support cv-qualifiers. Replaced by "
+                          "rise(callback(obj, method)).")
+    void rise(T *obj, M method)
+    {
+        core_util_critical_section_enter();
+        rise(callback(obj, method));
+        core_util_critical_section_exit();
+    }
+
+    /** Attach a function to call when a falling edge occurs on the input
+     *
+     *  @param func A pointer to a void function, or 0 to set as none
+     */
+    void fall(Callback<void()> func);
+
+    /** Attach a member function to call when a falling edge occurs on the input
+     *
+     *  @param obj pointer to the object to call the member function on
+     *  @param method pointer to the member function to be called
+     *  @deprecated
+     *      The rise function does not support cv-qualifiers. Replaced by
+     *      rise(callback(obj, method)).
+     */
+    template<typename T, typename M>
+    MBED_DEPRECATED_SINCE("mbed-os-5.1",
+                          "The fall function does not support cv-qualifiers. Replaced by "
+                          "fall(callback(obj, method)).")
+    void fall(T *obj, M method)
+    {
+        core_util_critical_section_enter();
+        fall(callback(obj, method));
+        core_util_critical_section_exit();
+    }
+
+    /** Set the input pin mode
+     *
+     *  @param pull PullUp, PullDown, PullNone, PullDefault
+     *  See PinNames.h for your target for definitions)
+     */
+    void mode(PinMode pull);
+
+    /** Enable IRQ. This method depends on hardware implementation, might enable one
+     *  port interrupts. For further information, check gpio_irq_enable().
+     */
+    void enable_irq();
+
+    /** Disable IRQ. This method depends on hardware implementation, might disable one
+     *  port interrupts. For further information, check gpio_irq_disable().
+     */
+    void disable_irq();
+
+    static void _irq_handler(uint32_t id, gpio_irq_event event);
+#if !defined(DOXYGEN_ONLY)
+protected:
+    gpio_t gpio;
+    gpio_irq_t gpio_irq;
+
+    Callback<void()> _rise;
+    Callback<void()> _fall;
+
+    void irq_init(PinName pin);
+#endif
+};
+
+} // namespace mbed
+
+#endif
+
+#endif