Diff: targets/TARGET_STM/TARGET_STM32F2/device/stm32f2xx_hal_pwr.h

Revision:

167:e84263d55307

Parent:

149:156823d33999

--- a/targets/TARGET_STM/TARGET_STM32F2/device/stm32f2xx_hal_pwr.h	Thu Jun 08 15:02:37 2017 +0100
+++ b/targets/TARGET_STM/TARGET_STM32F2/device/stm32f2xx_hal_pwr.h	Wed Jun 21 17:46:44 2017 +0100
@@ -2,13 +2,13 @@
   ******************************************************************************
   * @file    stm32f2xx_hal_pwr.h
   * @author  MCD Application Team
-  * @version V1.1.3
-  * @date    29-June-2016
+  * @version V1.2.1
+  * @date    14-April-2017
   * @brief   Header file of PWR HAL module.
   ******************************************************************************
   * @attention
   *
-  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
   *
   * Redistribution and use in source and binary forms, with or without modification,
   * are permitted provided that the following conditions are met:
@@ -84,7 +84,7 @@
 /** @defgroup PWR_WakeUp_Pins PWR WakeUp Pins
   * @{
   */
-#define PWR_WAKEUP_PIN1                 ((uint32_t)0x00000100U)
+#define PWR_WAKEUP_PIN1                 0x00000100U
 /**
   * @}
   */
@@ -108,13 +108,13 @@
 /** @defgroup PWR_PVD_Mode PWR PVD Mode
   * @{
   */
-#define PWR_PVD_MODE_NORMAL                 ((uint32_t)0x00000000U)   /*!< basic mode is used */
-#define PWR_PVD_MODE_IT_RISING              ((uint32_t)0x00010001U)   /*!< External Interrupt Mode with Rising edge trigger detection */
-#define PWR_PVD_MODE_IT_FALLING             ((uint32_t)0x00010002U)   /*!< External Interrupt Mode with Falling edge trigger detection */
-#define PWR_PVD_MODE_IT_RISING_FALLING      ((uint32_t)0x00010003U)   /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
-#define PWR_PVD_MODE_EVENT_RISING           ((uint32_t)0x00020001U)   /*!< Event Mode with Rising edge trigger detection */
-#define PWR_PVD_MODE_EVENT_FALLING          ((uint32_t)0x00020002U)   /*!< Event Mode with Falling edge trigger detection */
-#define PWR_PVD_MODE_EVENT_RISING_FALLING   ((uint32_t)0x00020003U)   /*!< Event Mode with Rising/Falling edge trigger detection */
+#define PWR_PVD_MODE_NORMAL                 0x00000000U   /*!< basic mode is used */
+#define PWR_PVD_MODE_IT_RISING              0x00010001U   /*!< External Interrupt Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_IT_FALLING             0x00010002U   /*!< External Interrupt Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_IT_RISING_FALLING      0x00010003U   /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING           0x00020001U   /*!< Event Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_EVENT_FALLING          0x00020002U   /*!< Event Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING_FALLING   0x00020003U   /*!< Event Mode with Rising/Falling edge trigger detection */
 /**
   * @}
   */
@@ -123,7 +123,7 @@
 /** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in SLEEP/STOP mode
   * @{
   */
-#define PWR_MAINREGULATOR_ON                        ((uint32_t)0x00000000U)
+#define PWR_MAINREGULATOR_ON                        0x00000000U
 #define PWR_LOWPOWERREGULATOR_ON                    PWR_CR_LPDS
 /**
   * @}
@@ -132,8 +132,8 @@
 /** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
   * @{
   */
-#define PWR_SLEEPENTRY_WFI              ((uint8_t)0x01U)
-#define PWR_SLEEPENTRY_WFE              ((uint8_t)0x02U)
+#define PWR_SLEEPENTRY_WFI              ((uint8_t)0x01)
+#define PWR_SLEEPENTRY_WFE              ((uint8_t)0x02)
 /**
   * @}
   */
@@ -141,8 +141,8 @@
 /** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
   * @{
   */
-#define PWR_STOPENTRY_WFI               ((uint8_t)0x01U)
-#define PWR_STOPENTRY_WFE               ((uint8_t)0x02U)
+#define PWR_STOPENTRY_WFI               ((uint8_t)0x01)
+#define PWR_STOPENTRY_WFE               ((uint8_t)0x02)
 /**
   * @}
   */