mbed official
mbed library sources. Supersedes mbed-src.
Dependents: Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more
Diff: platform/mbed_error.h
- Revision:
- 188:bcfe06ba3d64
- Parent:
- 187:0387e8f68319
- Child:
- 189:f392fc9709a3
--- a/platform/mbed_error.h Thu Sep 06 13:40:20 2018 +0100
+++ b/platform/mbed_error.h Thu Nov 08 11:46:34 2018 +0000
@@ -90,7 +90,7 @@
* System Error Status-es - 0x80XX0100 to 0x80XX0FFF - This corresponds to System error codes range(all values are negative). Bits 23-16 will be module type(marked with XX)\n
* Custom Error Status-es - 0xA0XX1000 to 0xA0XXFFFF - This corresponds to Custom error codes range(all values are negative). Bits 23-16 will be module type(marked with XX)\n\n
*
- * The ERROR CODE(values encoded into ERROR CODE bit-field in mbed_error_status_t) value range for each error type is also seperated as below:\n
+ * The ERROR CODE(values encoded into ERROR CODE bit-field in mbed_error_status_t) value range for each error type is also separated as below:\n
* Posix Error Codes - 1 to 255.\n
* System Error Codes - 256 to 4095.\n
* Custom Error Codes - 4096 to 65535.\n
@@ -231,31 +231,32 @@
* @note
* \n Below are the module code mappings:\n
\verbatim
- MBED_MODULE_APPLICATION 0 Application
- MBED_MODULE_PLATFORM 1 Platform
- MODULE_KERNEL 2 RTX Kernel
- MBED_MODULE_NETWORK_STACK 3 Network stack
- MBED_MODULE_HAL 4 HAL - Hardware Abstraction Layer
- MBED_MODULE_NETWORK_STACKMODULE_MEMORY_SUBSYSTEM 5 Memory Subsystem
- MBED_MODULE_FILESYSTEM 6 Filesystem
- MBED_MODULE_BLOCK_DEVICE 7 Block device
- MBED_MODULE_DRIVER 8 Driver
- MBED_MODULE_DRIVER_SERIAL 9 Serial Driver
- MBED_MODULE_DRIVER_RTC 10 RTC Driver
- MBED_MODULE_DRIVER_I2C 11 I2C Driver
- MODULE_DRIVER_SPI 12 SPI Driver
- MODULE_DRIVER_GPIO 13 GPIO Driver
- MODULE_DRIVER_ANALOG 14 Analog Driver
- MODULE_DRIVER_DIGITAL 15 DigitalIO Driver
- MODULE_DRIVER_CAN 16 CAN Driver
- MODULE_DRIVER_ETHERNET 17 Ethernet Driver
- MODULE_DRIVER_CRC 18 CRC Module
- MODULE_DRIVER_PWM 19 PWM Driver
- MODULE_DRIVER_QSPI 20 QSPI Driver
- MODULE_DRIVER_USB 21 USB Driver
- MODULE_TARGET_SDK 22 SDK
+ MBED_MODULE_APPLICATION 0 Application
+ MBED_MODULE_PLATFORM 1 Platform
+ MBED_MODULE_KERNEL 2 RTX Kernel
+ MBED_MODULE_NETWORK_STACK 3 Network stack
+ MBED_MODULE_HAL 4 HAL - Hardware Abstraction Layer
+ MBED_MODULE_MEMORY_SUBSYSTEM 5 Memory Subsystem
+ MBED_MODULE_FILESYSTEM 6 Filesystem
+ MBED_MODULE_BLOCK_DEVICE 7 Block device
+ MBED_MODULE_DRIVER 8 Driver
+ MBED_MODULE_DRIVER_SERIAL 9 Serial Driver
+ MBED_MODULE_DRIVER_RTC 10 RTC Driver
+ MBED_MODULE_DRIVER_I2C 11 I2C Driver
+ MBED_MODULE_DRIVER_SPI 12 SPI Driver
+ MBED_MODULE_DRIVER_GPIO 13 GPIO Driver
+ MBED_MODULE_DRIVER_ANALOG 14 Analog Driver
+ MBED_MODULE_DRIVER_DIGITAL 15 DigitalIO Driver
+ MBED_MODULE_DRIVER_CAN 16 CAN Driver
+ MBED_MODULE_DRIVER_ETHERNET 17 Ethernet Driver
+ MBED_MODULE_DRIVER_CRC 18 CRC Module
+ MBED_MODULE_DRIVER_PWM 19 PWM Driver
+ MBED_MODULE_DRIVER_QSPI 20 QSPI Driver
+ MBED_MODULE_DRIVER_USB 21 USB Driver
+ MBED_MODULE_TARGET_SDK 22 SDK
+ MBED_MODULE_BLE 23 BLE
- MBED_MODULE_UNKNOWN 255 Unknown module
+ MBED_MODULE_UNKNOWN 255 Unknown module
\endverbatim
*
*/
@@ -265,7 +266,7 @@
MBED_MODULE_KERNEL,
MBED_MODULE_NETWORK_STACK,
MBED_MODULE_HAL,
- MBED_MODULE_NETWORK_STACKMODULE_MEMORY_SUBSYSTEM,
+ MBED_MODULE_MEMORY_SUBSYSTEM,
MBED_MODULE_FILESYSTEM,
MBED_MODULE_BLOCK_DEVICE,
MBED_MODULE_DRIVER,
@@ -283,13 +284,14 @@
MBED_MODULE_DRIVER_QSPI,
MBED_MODULE_DRIVER_USB,
MBED_MODULE_TARGET_SDK,
+ MBED_MODULE_BLE,
/* Add More entities here as required */
MBED_MODULE_UNKNOWN = 255,
MBED_MODULE_MAX = MBED_MODULE_UNKNOWN
} mbed_module_type_t;
-//Use MBED_SUCCESS(=0) or any postive number for successful returns
+//Use MBED_SUCCESS(=0) or any positive number for successful returns
#define MBED_SUCCESS 0
#define MBED_POSIX_ERROR_BASE 0
@@ -468,7 +470,7 @@
INVALID_DATA 258 Invalid data
INVALID_FORMAT 259 Invalid format
INVALID_INDEX 260 Invalid Index
- INVALID_SIZE 261 Inavlid Size
+ INVALID_SIZE 261 Invalid Size
INVALID_OPERATION 262 Invalid Operation
NOT_FOUND 263 Not Found
ACCESS_DENIED 264 Access Denied
@@ -483,9 +485,9 @@
OPERATION_ABORTED 273 Operation failed
WRITE_PROTECTED 274 Attempt to write to write-protected resource
NO_RESPONSE 275 No response
- SEMAPHORE_LOCK_FAILED 276 Sempahore lock failed
+ SEMAPHORE_LOCK_FAILED 276 Semaphore lock failed
MUTEX_LOCK_FAILED 277 Mutex lock failed
- SEMAPHORE_UNLOCK_FAILED 278 Sempahore unlock failed
+ SEMAPHORE_UNLOCK_FAILED 278 Semaphore unlock failed
MUTEX_UNLOCK_FAILED 279 Mutex unlock failed
CRC_ERROR 280 CRC error or mismatch
OPEN_FAILED 281 Open failed
@@ -523,11 +525,14 @@
DEVICE_BUSY 313 Device Busy
CONFIG_UNSUPPORTED 314 Configuration not supported
CONFIG_MISMATCH 315 Configuration mismatch
- ALREADY_INITIALIZED 316 Already initialzied
+ ALREADY_INITIALIZED 316 Already initialized
HARDFAULT_EXCEPTION 317 HardFault exception
MEMMANAGE_EXCEPTION 318 MemManage exception
BUSFAULT_EXCEPTION 319 BusFault exception
USAGEFAULT_EXCEPTION 320 UsageFault exception
+ BLE_NO_FRAME_INITIALIZED, 321 BLE No frame initialized
+ BLE_BACKEND_CREATION_FAILED 322 BLE Backend creation failed
+ BLE_BACKEND_NOT_INITIALIZED 323 BLE Backend not initialized
\endverbatim
*
* @note
@@ -560,13 +565,12 @@
*
* \verbatim
++ MbedOS Error Info ++
- Error Status: 0x80040103
- Error Code: 259
- Error Module: 04
- Error Message: HAL Module error
- Error Location: 0x000067C7
- Error Value: 0x00005566
- Current Thread: Id: 0x200024A8 EntryFn: 0x0000FB0D StackSize: 0x00001000 StackMem: 0x200014A8 SP: 0x2002FFD8
+ Error Status: 0x80FF013D Code: 317 Module: 255
+ Error Message: Fault exception
+ Location: 0x5CD1
+ Error Value: 0x4A2A
+ Current Thread: Id: 0x20001E80 Entry: 0x5EB1 StackSize: 0x1000 StackMem: 0x20000E80 SP: 0x2002FF90
+ For more info, visit: https://mbed.com/s/error?error=0x80FF013D&mbedos=999999&core=0x410FC241&compile=1&ver=5060528
-- MbedOS Error Info --
\endverbatim
*/
@@ -716,7 +720,7 @@
MBED_DEFINE_SYSTEM_ERROR(INVALID_DATA_DETECTED, 2), /* 258 Invalid data detected */
MBED_DEFINE_SYSTEM_ERROR(INVALID_FORMAT, 3), /* 259 Invalid format */
MBED_DEFINE_SYSTEM_ERROR(INVALID_INDEX, 4), /* 260 Invalid Index */
- MBED_DEFINE_SYSTEM_ERROR(INVALID_SIZE, 5), /* 261 Inavlid Size */
+ MBED_DEFINE_SYSTEM_ERROR(INVALID_SIZE, 5), /* 261 Invalid Size */
MBED_DEFINE_SYSTEM_ERROR(INVALID_OPERATION, 6), /* 262 Invalid Operation */
MBED_DEFINE_SYSTEM_ERROR(ITEM_NOT_FOUND, 7), /* 263 Item Not Found */
MBED_DEFINE_SYSTEM_ERROR(ACCESS_DENIED, 8), /* 264 Access Denied */
@@ -731,9 +735,9 @@
MBED_DEFINE_SYSTEM_ERROR(OPERATION_ABORTED, 17), /* 273 Operation failed */
MBED_DEFINE_SYSTEM_ERROR(WRITE_PROTECTED, 18), /* 274 Attempt to write to write-protected resource */
MBED_DEFINE_SYSTEM_ERROR(NO_RESPONSE, 19), /* 275 No response */
- MBED_DEFINE_SYSTEM_ERROR(SEMAPHORE_LOCK_FAILED, 20), /* 276 Sempahore lock failed */
+ MBED_DEFINE_SYSTEM_ERROR(SEMAPHORE_LOCK_FAILED, 20), /* 276 Semaphore lock failed */
MBED_DEFINE_SYSTEM_ERROR(MUTEX_LOCK_FAILED, 21), /* 277 Mutex lock failed */
- MBED_DEFINE_SYSTEM_ERROR(SEMAPHORE_UNLOCK_FAILED, 22), /* 278 Sempahore unlock failed */
+ MBED_DEFINE_SYSTEM_ERROR(SEMAPHORE_UNLOCK_FAILED, 22), /* 278 Semaphore unlock failed */
MBED_DEFINE_SYSTEM_ERROR(MUTEX_UNLOCK_FAILED, 23), /* 279 Mutex unlock failed */
MBED_DEFINE_SYSTEM_ERROR(CRC_ERROR, 24), /* 280 CRC error or mismatch */
MBED_DEFINE_SYSTEM_ERROR(OPEN_FAILED, 25), /* 281 Open failed */
@@ -771,11 +775,14 @@
MBED_DEFINE_SYSTEM_ERROR(DEVICE_BUSY, 57), /* 313 Device Busy */
MBED_DEFINE_SYSTEM_ERROR(CONFIG_UNSUPPORTED, 58), /* 314 Configuration not supported */
MBED_DEFINE_SYSTEM_ERROR(CONFIG_MISMATCH, 59), /* 315 Configuration mismatch */
- MBED_DEFINE_SYSTEM_ERROR(ALREADY_INITIALIZED, 60), /* 316 Already initialzied */
+ MBED_DEFINE_SYSTEM_ERROR(ALREADY_INITIALIZED, 60), /* 316 Already initialized */
MBED_DEFINE_SYSTEM_ERROR(HARDFAULT_EXCEPTION, 61), /* 317 HardFault exception */
MBED_DEFINE_SYSTEM_ERROR(MEMMANAGE_EXCEPTION, 62), /* 318 MemManage exception */
MBED_DEFINE_SYSTEM_ERROR(BUSFAULT_EXCEPTION, 63), /* 319 BusFault exception */
MBED_DEFINE_SYSTEM_ERROR(USAGEFAULT_EXCEPTION, 64), /* 320 UsageFault exception*/
+ MBED_DEFINE_SYSTEM_ERROR(BLE_NO_FRAME_INITIALIZED, 65), /* 321 BLE No frame initialized */
+ MBED_DEFINE_SYSTEM_ERROR(BLE_BACKEND_CREATION_FAILED, 66), /* 322 BLE Backend creation failed */
+ MBED_DEFINE_SYSTEM_ERROR(BLE_BACKEND_NOT_INITIALIZED, 67), /* 323 BLE Backend not initialized */
//Everytime you add a new system error code, you must update
//Error documentation under Handbook to capture the info on
@@ -915,7 +922,6 @@
* Callback/Error hook function prototype. Applications needing a callback when an error is reported can use mbed_set_error_hook function
* to register a callback/error hook function using the following prototype. When an error happens in the system error handling
* implementation will invoke this callback with the mbed_error_status_t reported and the error context at the time of error.
- * @param error_status mbed_error_status_t status being reported.
* @param error_ctx Error context structure associated with this error.
* @return void
*
