mbed official
mbed library sources. Supersedes mbed-src.
Dependents: Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more
Diff: platform/mbed_error.h
- Revision:
- 187:0387e8f68319
- Parent:
- 186:707f6e361f3e
- Child:
- 188:bcfe06ba3d64
--- a/platform/mbed_error.h Fri Jun 22 16:45:37 2018 +0100
+++ b/platform/mbed_error.h Thu Sep 06 13:40:20 2018 +0100
@@ -29,17 +29,24 @@
extern "C" {
#endif
-/** Define this macro to include filenames in error context. For release builds, do not include filename to save memory.
- * MBED_CONF_ERROR_FILENAME_CAPTURE_ENABLED
- */
+/** Define this macro to include filenames in error context. For release builds, do not include filename to save memory.
+ * MBED_PLATFORM_CONF_ERROR_FILENAME_CAPTURE_ENABLED
+ */
+
+/** Define this macro to enable error history
+ * MBED_PLATFORM_CONF_ERROR_HIST_ENABLED
+ */
-/** Define this macro to disable error logging, note that the first and last error capture will still be active by default.
- * MBED_CONF_ERROR_HIST_DISABLED
- */
-
-#ifndef MBED_CONF_MAX_ERROR_FILENAME_LEN
-#define MBED_CONF_MAX_ERROR_FILENAME_LEN 16
-#endif
+#ifndef MBED_CONF_PLATFORM_MAX_ERROR_FILENAME_LEN
+#define MBED_CONF_PLATFORM_MAX_ERROR_FILENAME_LEN 16
+#else //MBED_CONF_PLATFORM_MAX_ERROR_FILENAME_LEN
+#if MBED_CONF_PLATFORM_MAX_ERROR_FILENAME_LEN > 64
+//We have to limit this to 64 bytes since we use mbed_error_printf for error reporting
+//and mbed_error_vfprintf uses 128bytes internal buffer which may not be sufficient for anything
+//longer that 64 bytes with the current implementation.
+#error "Unsupported error filename buffer length detected, max supported length is 64 chars. Please change MBED_CONF_PLATFORM_MAX_ERROR_FILENAME_LEN or max-error-filename-len in configuration."
+#endif
+#endif
#define MBED_ERROR_STATUS_CODE_MASK (0x0000FFFF)
#define MBED_ERROR_STATUS_CODE_POS (0)
@@ -61,10 +68,10 @@
((0x80000000) | \
(MBED_ERROR_STATUS_CODE_MASK & (error_code << MBED_ERROR_STATUS_CODE_POS)) | \
(MBED_ERROR_STATUS_MODULE_MASK & (module << MBED_ERROR_STATUS_MODULE_POS)) | \
- (MBED_ERROR_STATUS_TYPE_MASK & (type << MBED_ERROR_STATUS_TYPE_POS)))
+ (MBED_ERROR_STATUS_TYPE_MASK & (type << MBED_ERROR_STATUS_TYPE_POS)))
#define MBED_GET_ERROR_TYPE( error_status ) ((error_status & MBED_ERROR_STATUS_TYPE_MASK) >> MBED_ERROR_STATUS_TYPE_POS)
-#define MBED_GET_ERROR_MODULE( error_status ) ((error_status & MBED_ERROR_STATUS_MODULE_MASK) >> MBED_ERROR_STATUS_MODULE_POS)
+#define MBED_GET_ERROR_MODULE( error_status ) ((error_status & MBED_ERROR_STATUS_MODULE_MASK) >> MBED_ERROR_STATUS_MODULE_POS)
#define MBED_GET_ERROR_CODE( error_status ) (int)((MBED_GET_ERROR_TYPE( error_status ) == MBED_ERROR_TYPE_POSIX)?(-error_status):((error_status & MBED_ERROR_STATUS_CODE_MASK) >> MBED_ERROR_STATUS_CODE_POS))
/** mbed_error_status_t description
@@ -77,7 +84,7 @@
| 31 Always Negative | 30-29(2 bits) | 28-24 | 23-16(8 bits) | 15-0(16 bits) |
| -1 | TYPE | (unused/reserved) | MODULE TYPE | ERROR CODE |
\endverbatim
- *
+ *
* The error status value range for each error type is as follows:\n
* Posix Error Status-es - 0xFFFFFFFF to 0xFFFFFF01(-1 -255) - This corresponds to Posix error codes represented as negative.\n
* System Error Status-es - 0x80XX0100 to 0x80XX0FFF - This corresponds to System error codes range(all values are negative). Bits 23-16 will be module type(marked with XX)\n
@@ -134,7 +141,7 @@
* @param error_value Value associated with the error status. This would depend on error code/error scenario.
*
* @code
- *
+ *
* MBED_WARNING( ERROR_INVALID_SIZE, "MyDriver: Invalid size in read" )
* MBED_WARNING1( ERROR_INVALID_SIZE, "MyDriver: Invalid size in read", size_val )
*
@@ -144,16 +151,16 @@
*
*/
#ifdef NDEBUG
- #define MBED_WARNING1( error_status, error_msg, error_value ) mbed_warning( error_status, (const char *)NULL, (uint32_t)error_value, NULL, 0 )
- #define MBED_WARNING( error_status, error_msg ) mbed_warning( error_status, (const char *)NULL, (uint32_t)0, NULL, 0 )
-#else
- #if defined(MBED_CONF_ERROR_FILENAME_CAPTURE_ENABLED)
- #define MBED_WARNING1( error_status, error_msg, error_value ) mbed_warning( error_status, (const char *)error_msg, (uint32_t)error_value, (const char *)MBED_FILENAME, __LINE__ )
- #define MBED_WARNING( error_status, error_msg ) mbed_warning( error_status, (const char *)error_msg, (uint32_t)0 , (const char *)MBED_FILENAME, __LINE__ )
- #else
- #define MBED_WARNING1( error_status, error_msg, error_value ) mbed_warning( error_status, (const char *)error_msg, (uint32_t)error_value, NULL, 0 )
- #define MBED_WARNING( error_status, error_msg ) mbed_warning( error_status, (const char *)error_msg, (uint32_t)0, NULL, 0 )
- #endif
+#define MBED_WARNING1( error_status, error_msg, error_value ) mbed_warning( error_status, (const char *)NULL, (uint32_t)error_value, NULL, 0 )
+#define MBED_WARNING( error_status, error_msg ) mbed_warning( error_status, (const char *)NULL, (uint32_t)0, NULL, 0 )
+#else //NDEBUG
+#if MBED_CONF_PLATFORM_ERROR_FILENAME_CAPTURE_ENABLED
+#define MBED_WARNING1( error_status, error_msg, error_value ) mbed_warning( error_status, (const char *)error_msg, (uint32_t)error_value, (const char *)MBED_FILENAME, __LINE__ )
+#define MBED_WARNING( error_status, error_msg ) mbed_warning( error_status, (const char *)error_msg, (uint32_t)0 , (const char *)MBED_FILENAME, __LINE__ )
+#else //MBED_CONF_PLATFORM_ERROR_FILENAME_CAPTURE_ENABLED
+#define MBED_WARNING1( error_status, error_msg, error_value ) mbed_warning( error_status, (const char *)error_msg, (uint32_t)error_value, NULL, 0 )
+#define MBED_WARNING( error_status, error_msg ) mbed_warning( error_status, (const char *)error_msg, (uint32_t)0, NULL, 0 )
+#endif
#endif
/**
@@ -166,26 +173,26 @@
* MBED_ERROR_INVALID_ARGUMENT if called with invalid error status/codes
*
* @code
- *
+ *
* MBED_ERROR( MBED_ERROR_MUTEX_LOCK_FAILED, "MyDriver: Can't lock driver Mutex" )
* MBED_ERROR1( MBED_ERROR_MUTEX_LOCK_FAILED, "MyDriver: Can't lock driver Mutex", &my_mutex )
*
* @endcode
* @note The macro calls mbed_error API with filename and line number info without caller explicitly passing them.
- * Since this macro is a wrapper for mbed_error API callers should process the return value from this macro which is the return value from calling mbed_error API.
+ * Since this macro is a wrapper for mbed_error API callers should process the return value from this macro which is the return value from calling mbed_error API.
*
*/
#ifdef NDEBUG
- #define MBED_ERROR1( error_status, error_msg, error_value ) mbed_error( error_status, (const char *)NULL, (uint32_t)error_value, NULL, 0 )
- #define MBED_ERROR( error_status, error_msg ) mbed_error( error_status, (const char *)NULL, (uint32_t)0 , NULL, 0 )
-#else
- #if defined(MBED_CONF_ERROR_FILENAME_CAPTURE_ENABLED)
- #define MBED_ERROR1( error_status, error_msg, error_value ) mbed_error( error_status, (const char *)error_msg, (uint32_t)error_value, (const char *)MBED_FILENAME, __LINE__ )
- #define MBED_ERROR( error_status, error_msg ) mbed_error( error_status, (const char *)error_msg, (uint32_t)0 , (const char *)MBED_FILENAME, __LINE__ )
- #else
- #define MBED_ERROR1( error_status, error_msg, error_value ) mbed_error( error_status, (const char *)error_msg, (uint32_t)error_value, NULL, 0 )
- #define MBED_ERROR( error_status, error_msg ) mbed_error( error_status, (const char *)error_msg, (uint32_t)0 , NULL, 0 )
- #endif
+#define MBED_ERROR1( error_status, error_msg, error_value ) mbed_error( error_status, (const char *)NULL, (uint32_t)error_value, NULL, 0 )
+#define MBED_ERROR( error_status, error_msg ) mbed_error( error_status, (const char *)NULL, (uint32_t)0 , NULL, 0 )
+#else //NDEBUG
+#if MBED_CONF_PLATFORM_ERROR_FILENAME_CAPTURE_ENABLED
+#define MBED_ERROR1( error_status, error_msg, error_value ) mbed_error( error_status, (const char *)error_msg, (uint32_t)error_value, (const char *)MBED_FILENAME, __LINE__ )
+#define MBED_ERROR( error_status, error_msg ) mbed_error( error_status, (const char *)error_msg, (uint32_t)0 , (const char *)MBED_FILENAME, __LINE__ )
+#else //MBED_CONF_PLATFORM_ERROR_FILENAME_CAPTURE_ENABLED
+#define MBED_ERROR1( error_status, error_msg, error_value ) mbed_error( error_status, (const char *)error_msg, (uint32_t)error_value, NULL, 0 )
+#define MBED_ERROR( error_status, error_msg ) mbed_error( error_status, (const char *)error_msg, (uint32_t)0 , NULL, 0 )
+#endif
#endif
//Error Type definition
@@ -194,19 +201,18 @@
* This enumeration defines the Error types supported. The value of these enum values will be encoded into mbed_error_status_t TYPE field.\n
* See mbed_error_status_t description for more info.\n
* MBED_ERROR_TYPE_SYSTEM - Used to indicate that the error status is of System defined Error type.\n
- * MBED_ERROR_TYPE_CUSTOM - Used to indicate that the error status is of Custom defined Error type.\n
- * MBED_ERROR_TYPE_POSIX - Used to indicate that the error status is of Posix error type.\n
+ * MBED_ERROR_TYPE_CUSTOM - Used to indicate that the error status is of Custom defined Error type.\n
+ * MBED_ERROR_TYPE_POSIX - Used to indicate that the error status is of Posix error type.\n
*
*/
-typedef enum _mbed_error_type_t
-{
+typedef enum _mbed_error_type_t {
MBED_ERROR_TYPE_SYSTEM = 0,
MBED_ERROR_TYPE_CUSTOM = 1,
//2 is reserved
//Use 3 for POSIX because we are mapping -1 to -255 to POSIX error codes
//and thus we must use 3 to match the type bits in error status representation which are from 0xFFFFFFFF to 0xFFFFFF00
MBED_ERROR_TYPE_POSIX = 3
-} mbed_error_type_t;
+} mbed_error_type_t;
//Module type/id definitions
/** mbed_module_type_t definition
@@ -221,16 +227,16 @@
* @code
* Example: mbed_error_status_t i2c_driver_error = MBED_MAKE_ERROR( MBED_MODULE_DRIVER_I2C, MBED_ERROR_CONFIG_UNSUPPORTED );
* @endcode
- *
+ *
* @note
* \n Below are the module code mappings:\n
\verbatim
- MBED_MODULE_APPLICATION 0 Application
+ MBED_MODULE_APPLICATION 0 Application
MBED_MODULE_PLATFORM 1 Platform
MODULE_KERNEL 2 RTX Kernel
MBED_MODULE_NETWORK_STACK 3 Network stack
MBED_MODULE_HAL 4 HAL - Hardware Abstraction Layer
- MBED_MODULE_NETWORK_STACKMODULE_MEMORY_SUBSYSTEM 5 Memory Subsystem
+ MBED_MODULE_NETWORK_STACKMODULE_MEMORY_SUBSYSTEM 5 Memory Subsystem
MBED_MODULE_FILESYSTEM 6 Filesystem
MBED_MODULE_BLOCK_DEVICE 7 Block device
MBED_MODULE_DRIVER 8 Driver
@@ -247,14 +253,13 @@
MODULE_DRIVER_PWM 19 PWM Driver
MODULE_DRIVER_QSPI 20 QSPI Driver
MODULE_DRIVER_USB 21 USB Driver
- MODULE_TARGET_SDK 22 SDK
-
+ MODULE_TARGET_SDK 22 SDK
+
MBED_MODULE_UNKNOWN 255 Unknown module
\endverbatim
- *
+ *
*/
-typedef enum _mbed_module_type
-{
+typedef enum _mbed_module_type {
MBED_MODULE_APPLICATION = 0,
MBED_MODULE_PLATFORM,
MBED_MODULE_KERNEL,
@@ -279,7 +284,7 @@
MBED_MODULE_DRIVER_USB,
MBED_MODULE_TARGET_SDK,
/* Add More entities here as required */
-
+
MBED_MODULE_UNKNOWN = 255,
MBED_MODULE_MAX = MBED_MODULE_UNKNOWN
} mbed_module_type_t;
@@ -309,141 +314,141 @@
* ERROR_EPERM = -(MBED_POSIX_ERROR_BASE+EPERM)\n
* Its effectively equivalent to:\n
* ERROR_CODE_EPERM = 1\n
- * ERROR_EPERM = -1\n
+ * ERROR_EPERM = -1\n
* All Posix error codes currently supported by MbedOS(defined in mbed_retarget.h) are defined using the MBED_DEFINE_POSIX_ERROR macro.\n\n
* Below are the Posic error codes and the description:\n
* \verbatim
- EPERM 1 Operation not permitted
- ENOENT 2 No such file or directory
- ESRCH 3 No such process
- EINTR 4 Interrupted system call
- EIO 5 I/O error
- ENXIO 6 No such device or address
- E2BIG 7 Argument list too long
- ENOEXEC 8 Exec format error
- EBADF 9 Bad file number
- ECHILD 10 No child processes
- EAGAIN 11 Try again
- ENOMEM 12 Out of memory
- EACCES 13 Permission denied
- EFAULT 14 Bad address
- ENOTBLK 15 Block device required
- EBUSY 16 Device or resource busy
- EEXIST 17 File exists
- EXDEV 18 Cross-device link
- ENODEV 19 No such device
- ENOTDIR 20 Not a directory
- EISDIR 21 Is a directory
- EINVAL 22 Invalid argument
- ENFILE 23 File table overflow
- EMFILE 24 Too many open files
- ENOTTY 25 Not a typewriter
- ETXTBSY 26 Text file busy
- EFBIG 27 File too large
- ENOSPC 28 No space left on device
- ESPIPE 29 Illegal seek
- EROFS 30 Read-only file system
- EMLINK 31 Too many links
- EPIPE 32 Broken pipe
- EDOM 33 Math argument out of domain of func
- ERANGE 34 Math result not representable
- EDEADLK 35 Resource deadlock would occur
- ENAMETOOLONG 36 File name too long
- ENOLCK 37 No record locks available
- ENOSYS 38 Function not implemented
- ENOTEMPTY 39 Directory not empty
- ELOOP 40 Too many symbolic links encountered
- EWOULDBLOCK EAGAIN Operation would block
- ENOMSG 42 No message of desired type
- EIDRM 43 Identifier removed
- ECHRNG 44 Channel number out of range
- EL2NSYNC 45 Level 2 not synchronized
- EL3HLT 46 Level 3 halted
- EL3RST 47 Level 3 reset
- ELNRNG 48 Link number out of range
- EUNATCH 49 Protocol driver not attached
- ENOCSI 50 No CSI structure available
- EL2HLT 51 Level 2 halted
- EBADE 52 Invalid exchange
- EBADR 53 Invalid request descriptor
- EXFULL 54 Exchange full
- ENOANO 55 No anode
- EBADRQC 56 Invalid request code
- EBADSLT 57 Invalid slot
- EDEADLOCK EDEADLK Resource deadlock would occur
- EBFONT 59 Bad font file format
- ENOSTR 60 Device not a stream
- ENODATA 61 No data available
- ETIME 62 Timer expired
- ENOSR 63 Out of streams resources
- ENONET 64 Machine is not on the network
- ENOPKG 65 Package not installed
- EREMOTE 66 Object is remote
- ENOLINK 67 Link has been severed
- EADV 68 Advertise error
- ESRMNT 69 Srmount error
- ECOMM 70 Communication error on send
- EPROTO 71 Protocol error
- EMULTIHOP 72 Multihop attempted
- EDOTDOT 73 RFS specific error
- EBADMSG 74 Not a data message
- EOVERFLOW 75 Value too large for defined data type
- ENOTUNIQ 76 Name not unique on network
- EBADFD 77 File descriptor in bad state
- EREMCHG 78 Remote address changed
- ELIBACC 79 Can not access a needed shared library
- ELIBBAD 80 Accessing a corrupted shared library
- ELIBSCN 81 .lib section in a.out corrupted
- ELIBMAX 82 Attempting to link in too many shared libraries
- ELIBEXEC 83 Cannot exec a shared library directly
- EILSEQ 84 Illegal byte sequence
- ERESTART 85 Interrupted system call should be restarted
- ESTRPIPE 86 Streams pipe error
- EUSERS 87 Too many users
- ENOTSOCK 88 Socket operation on non-socket
- EDESTADDRREQ 89 Destination address required
- EMSGSIZE 90 Message too long
- EPROTOTYPE 91 Protocol wrong type for socket
- ENOPROTOOPT 92 Protocol not available
- EPROTONOSUPPORT 93 Protocol not supported
- ESOCKTNOSUPPORT 94 Socket type not supported
- EOPNOTSUPP 95 Operation not supported on transport endpoint
- EPFNOSUPPORT 96 Protocol family not supported
- EAFNOSUPPORT 97 Address family not supported by protocol
- EADDRINUSE 98 Address already in use
- EADDRNOTAVAIL 99 Cannot assign requested address
- ENETDOWN 100 Network is down
- ENETUNREACH 101 Network is unreachable
- ENETRESET 102 Network dropped connection because of reset
- ECONNABORTED 103 Software caused connection abort
- ECONNRESET 104 Connection reset by peer
- ENOBUFS 105 No buffer space available
- EISCONN 106 Transport endpoint is already connected
- ENOTCONN 107 Transport endpoint is not connected
- ESHUTDOWN 108 Cannot send after transport endpoint shutdown
- ETOOMANYREFS 109 Too many references: cannot splice
- ETIMEDOUT 110 Connection timed out
- ECONNREFUSED 111 Connection refused
- EHOSTDOWN 112 Host is down
- EHOSTUNREACH 113 No route to host
- EALREADY 114 Operation already in progress
- EINPROGRESS 115 Operation now in progress
- ESTALE 116 Stale NFS file handle
- EUCLEAN 117 Structure needs cleaning
- ENOTNAM 118 Not a XENIX named type file
- ENAVAIL 119 No XENIX semaphores available
- EISNAM 120 Is a named type file
- EREMOTEIO 121 Remote I/O error
- EDQUOT 122 Quota exceeded
- ENOMEDIUM 123 No medium found
- EMEDIUMTYPE 124 Wrong medium type
- ECANCELED 125 Operation Canceled
- ENOKEY 126 Required key not available
- EKEYEXPIRED 127 Key has expired
- EKEYREVOKED 128 Key has been revoked
- EKEYREJECTED 129 Key was rejected by service
- EOWNERDEAD 130 Owner died
- ENOTRECOVERABLE 131 State not recoverable
+ EPERM 1 Operation not permitted
+ ENOENT 2 No such file or directory
+ ESRCH 3 No such process
+ EINTR 4 Interrupted system call
+ EIO 5 I/O error
+ ENXIO 6 No such device or address
+ E2BIG 7 Argument list too long
+ ENOEXEC 8 Exec format error
+ EBADF 9 Bad file number
+ ECHILD 10 No child processes
+ EAGAIN 11 Try again
+ ENOMEM 12 Out of memory
+ EACCES 13 Permission denied
+ EFAULT 14 Bad address
+ ENOTBLK 15 Block device required
+ EBUSY 16 Device or resource busy
+ EEXIST 17 File exists
+ EXDEV 18 Cross-device link
+ ENODEV 19 No such device
+ ENOTDIR 20 Not a directory
+ EISDIR 21 Is a directory
+ EINVAL 22 Invalid argument
+ ENFILE 23 File table overflow
+ EMFILE 24 Too many open files
+ ENOTTY 25 Not a typewriter
+ ETXTBSY 26 Text file busy
+ EFBIG 27 File too large
+ ENOSPC 28 No space left on device
+ ESPIPE 29 Illegal seek
+ EROFS 30 Read-only file system
+ EMLINK 31 Too many links
+ EPIPE 32 Broken pipe
+ EDOM 33 Math argument out of domain of func
+ ERANGE 34 Math result not representable
+ EDEADLK 35 Resource deadlock would occur
+ ENAMETOOLONG 36 File name too long
+ ENOLCK 37 No record locks available
+ ENOSYS 38 Function not implemented
+ ENOTEMPTY 39 Directory not empty
+ ELOOP 40 Too many symbolic links encountered
+ EWOULDBLOCK EAGAIN Operation would block
+ ENOMSG 42 No message of desired type
+ EIDRM 43 Identifier removed
+ ECHRNG 44 Channel number out of range
+ EL2NSYNC 45 Level 2 not synchronized
+ EL3HLT 46 Level 3 halted
+ EL3RST 47 Level 3 reset
+ ELNRNG 48 Link number out of range
+ EUNATCH 49 Protocol driver not attached
+ ENOCSI 50 No CSI structure available
+ EL2HLT 51 Level 2 halted
+ EBADE 52 Invalid exchange
+ EBADR 53 Invalid request descriptor
+ EXFULL 54 Exchange full
+ ENOANO 55 No anode
+ EBADRQC 56 Invalid request code
+ EBADSLT 57 Invalid slot
+ EDEADLOCK EDEADLK Resource deadlock would occur
+ EBFONT 59 Bad font file format
+ ENOSTR 60 Device not a stream
+ ENODATA 61 No data available
+ ETIME 62 Timer expired
+ ENOSR 63 Out of streams resources
+ ENONET 64 Machine is not on the network
+ ENOPKG 65 Package not installed
+ EREMOTE 66 Object is remote
+ ENOLINK 67 Link has been severed
+ EADV 68 Advertise error
+ ESRMNT 69 Srmount error
+ ECOMM 70 Communication error on send
+ EPROTO 71 Protocol error
+ EMULTIHOP 72 Multihop attempted
+ EDOTDOT 73 RFS specific error
+ EBADMSG 74 Not a data message
+ EOVERFLOW 75 Value too large for defined data type
+ ENOTUNIQ 76 Name not unique on network
+ EBADFD 77 File descriptor in bad state
+ EREMCHG 78 Remote address changed
+ ELIBACC 79 Can not access a needed shared library
+ ELIBBAD 80 Accessing a corrupted shared library
+ ELIBSCN 81 .lib section in a.out corrupted
+ ELIBMAX 82 Attempting to link in too many shared libraries
+ ELIBEXEC 83 Cannot exec a shared library directly
+ EILSEQ 84 Illegal byte sequence
+ ERESTART 85 Interrupted system call should be restarted
+ ESTRPIPE 86 Streams pipe error
+ EUSERS 87 Too many users
+ ENOTSOCK 88 Socket operation on non-socket
+ EDESTADDRREQ 89 Destination address required
+ EMSGSIZE 90 Message too long
+ EPROTOTYPE 91 Protocol wrong type for socket
+ ENOPROTOOPT 92 Protocol not available
+ EPROTONOSUPPORT 93 Protocol not supported
+ ESOCKTNOSUPPORT 94 Socket type not supported
+ EOPNOTSUPP 95 Operation not supported on transport endpoint
+ EPFNOSUPPORT 96 Protocol family not supported
+ EAFNOSUPPORT 97 Address family not supported by protocol
+ EADDRINUSE 98 Address already in use
+ EADDRNOTAVAIL 99 Cannot assign requested address
+ ENETDOWN 100 Network is down
+ ENETUNREACH 101 Network is unreachable
+ ENETRESET 102 Network dropped connection because of reset
+ ECONNABORTED 103 Software caused connection abort
+ ECONNRESET 104 Connection reset by peer
+ ENOBUFS 105 No buffer space available
+ EISCONN 106 Transport endpoint is already connected
+ ENOTCONN 107 Transport endpoint is not connected
+ ESHUTDOWN 108 Cannot send after transport endpoint shutdown
+ ETOOMANYREFS 109 Too many references: cannot splice
+ ETIMEDOUT 110 Connection timed out
+ ECONNREFUSED 111 Connection refused
+ EHOSTDOWN 112 Host is down
+ EHOSTUNREACH 113 No route to host
+ EALREADY 114 Operation already in progress
+ EINPROGRESS 115 Operation now in progress
+ ESTALE 116 Stale NFS file handle
+ EUCLEAN 117 Structure needs cleaning
+ ENOTNAM 118 Not a XENIX named type file
+ ENAVAIL 119 No XENIX semaphores available
+ EISNAM 120 Is a named type file
+ EREMOTEIO 121 Remote I/O error
+ EDQUOT 122 Quota exceeded
+ ENOMEDIUM 123 No medium found
+ EMEDIUMTYPE 124 Wrong medium type
+ ECANCELED 125 Operation Canceled
+ ENOKEY 126 Required key not available
+ EKEYEXPIRED 127 Key has expired
+ EKEYREVOKED 128 Key has been revoked
+ EKEYREJECTED 129 Key was rejected by service
+ EOWNERDEAD 130 Owner died
+ ENOTRECOVERABLE 131 State not recoverable
\endverbatim
*
* @note
@@ -453,75 +458,75 @@
* ERROR_INVALID_ARGUMENT = MAKE_MBED_ERROR(ERROR_TYPE_SYSTEM, MBED_MODULE_UNKNOWN, ERROR_CODE_INVALID_ARGUMENT)\n
* Its effectively equivalent to:\n
* ERROR_CODE_INVALID_ARGUMENT = 1\n
- * ERROR_INVALID_ARGUMENT = 0x80FF0001\n (Note that MODULE field is set to MBED_MODULE_UNKNOWN)
+ * ERROR_INVALID_ARGUMENT = 0x80FF0001\n (Note that MODULE field is set to MBED_MODULE_UNKNOWN)
* New System Error codes should be defined using MBED_DEFINE_SYSTEM_ERROR macro and must have an unique error code value\n
* passed as the second argument in the MBED_DEFINE_SYSTEM_ERROR macro.\n\n
* Below are the Mbed System error codes and the description:
- * \verbatim
- UNKNOWN 256 Unknown error
- INVALID_ARGUMENT 257 Invalid Argument
- INVALID_DATA 258 Invalid data
- INVALID_FORMAT 259 Invalid format
- INVALID_INDEX 260 Invalid Index
- INVALID_SIZE 261 Inavlid Size
- INVALID_OPERATION 262 Invalid Operation
- NOT_FOUND 263 Not Found
- ACCESS_DENIED 264 Access Denied
- NOT_SUPPORTED 265 Not supported
- BUFFER_FULL 266 Buffer Full
- MEDIA_FULL 267 Media/Disk Full
- ALREADY_IN_USE 268 Already in use
- TIMEOUT 269 Timeout error
- NOT_READY 270 Not Ready
- FAILED_OPERATION 271 Requested Operation failed
- OPERATION_PROHIBITED 272 Operation prohibited
- OPERATION_ABORTED 273 Operation failed
- WRITE_PROTECTED 274 Attempt to write to write-protected resource
- NO_RESPONSE 275 No response
- SEMAPHORE_LOCK_FAILED 276 Sempahore lock failed
- MUTEX_LOCK_FAILED 277 Mutex lock failed
- SEMAPHORE_UNLOCK_FAILED 278 Sempahore unlock failed
- MUTEX_UNLOCK_FAILED 279 Mutex unlock failed
- CRC_ERROR 280 CRC error or mismatch
- OPEN_FAILED 281 Open failed
- CLOSE_FAILED 282 Close failed
- READ_FAILED 283 Read failed
- WRITE_FAILED 284 Write failed
- INITIALIZATION_FAILED 285 Initialization failed
- BOOT_FAILURE 286 Boot failure
- OUT_OF_MEMORY 287 Out of memory
- OUT_OF_RESOURCES 288 Out of resources
- ALLOC_FAILED 289 Alloc failed
- FREE_FAILED 290 Free failed
- OVERFLOW 291 Overflow error
- UNDERFLOW 292 Underflow error
- STACK_OVERFLOW 293 Stack overflow error
- ISR_QUEUE_OVERFLOW 294 ISR queue overflow
- TIMER_QUEUE_OVERFLOW 295 Timer Queue overflow
- CLIB_SPACE_UNAVAILABLE 296 Standard library error - Space unavailable
- CLIB_EXCEPTION 297 Standard library error - Exception
- CLIB_MUTEX_INIT_FAILURE 298 Standard library error - Mutex Init failure
- CREATE_FAILED 299 Create failed
- DELETE_FAILED 300 Delete failed
- THREAD_CREATE_FAILED 301 Thread Create failed
- THREAD_DELETE_FAILED 302 Thread Delete failed
- PROHIBITED_IN_ISR_CONTEXT 303 Operation Prohibited in ISR context
- PINMAP_INVALID 304 Pinmap Invalid
- RTOS_EVENT 305 Unknown Rtos Error
- RTOS_THREAD_EVENT 306 Rtos Thread Error
- RTOS_MUTEX_EVENT 307 Rtos Mutex Error
- RTOS_SEMAPHORE_EVENT 308 Rtos Semaphore Error
- RTOS_MEMORY_POOL_EVENT 309 Rtos Memory Pool Error
- RTOS_TIMER_EVENT 310 Rtos Timer Error
- RTOS_EVENT_FLAGS_EVENT 311 Rtos Event flags Error
- RTOS_MESSAGE_QUEUE_EVENT 312 Rtos Message queue Error
- DEVICE_BUSY 313 Device Busy
- CONFIG_UNSUPPORTED 314 Configuration not supported
- CONFIG_MISMATCH 315 Configuration mismatch
- ALREADY_INITIALIZED 316 Already initialzied
- HARDFAULT_EXCEPTION 317 HardFault exception
- MEMMANAGE_EXCEPTION 318 MemManage exception
- BUSFAULT_EXCEPTION 319 BusFault exception
+ * \verbatim
+ UNKNOWN 256 Unknown error
+ INVALID_ARGUMENT 257 Invalid Argument
+ INVALID_DATA 258 Invalid data
+ INVALID_FORMAT 259 Invalid format
+ INVALID_INDEX 260 Invalid Index
+ INVALID_SIZE 261 Inavlid Size
+ INVALID_OPERATION 262 Invalid Operation
+ NOT_FOUND 263 Not Found
+ ACCESS_DENIED 264 Access Denied
+ NOT_SUPPORTED 265 Not supported
+ BUFFER_FULL 266 Buffer Full
+ MEDIA_FULL 267 Media/Disk Full
+ ALREADY_IN_USE 268 Already in use
+ TIMEOUT 269 Timeout error
+ NOT_READY 270 Not Ready
+ FAILED_OPERATION 271 Requested Operation failed
+ OPERATION_PROHIBITED 272 Operation prohibited
+ OPERATION_ABORTED 273 Operation failed
+ WRITE_PROTECTED 274 Attempt to write to write-protected resource
+ NO_RESPONSE 275 No response
+ SEMAPHORE_LOCK_FAILED 276 Sempahore lock failed
+ MUTEX_LOCK_FAILED 277 Mutex lock failed
+ SEMAPHORE_UNLOCK_FAILED 278 Sempahore unlock failed
+ MUTEX_UNLOCK_FAILED 279 Mutex unlock failed
+ CRC_ERROR 280 CRC error or mismatch
+ OPEN_FAILED 281 Open failed
+ CLOSE_FAILED 282 Close failed
+ READ_FAILED 283 Read failed
+ WRITE_FAILED 284 Write failed
+ INITIALIZATION_FAILED 285 Initialization failed
+ BOOT_FAILURE 286 Boot failure
+ OUT_OF_MEMORY 287 Out of memory
+ OUT_OF_RESOURCES 288 Out of resources
+ ALLOC_FAILED 289 Alloc failed
+ FREE_FAILED 290 Free failed
+ OVERFLOW 291 Overflow error
+ UNDERFLOW 292 Underflow error
+ STACK_OVERFLOW 293 Stack overflow error
+ ISR_QUEUE_OVERFLOW 294 ISR queue overflow
+ TIMER_QUEUE_OVERFLOW 295 Timer Queue overflow
+ CLIB_SPACE_UNAVAILABLE 296 Standard library error - Space unavailable
+ CLIB_EXCEPTION 297 Standard library error - Exception
+ CLIB_MUTEX_INIT_FAILURE 298 Standard library error - Mutex Init failure
+ CREATE_FAILED 299 Create failed
+ DELETE_FAILED 300 Delete failed
+ THREAD_CREATE_FAILED 301 Thread Create failed
+ THREAD_DELETE_FAILED 302 Thread Delete failed
+ PROHIBITED_IN_ISR_CONTEXT 303 Operation Prohibited in ISR context
+ PINMAP_INVALID 304 Pinmap Invalid
+ RTOS_EVENT 305 Unknown Rtos Error
+ RTOS_THREAD_EVENT 306 Rtos Thread Error
+ RTOS_MUTEX_EVENT 307 Rtos Mutex Error
+ RTOS_SEMAPHORE_EVENT 308 Rtos Semaphore Error
+ RTOS_MEMORY_POOL_EVENT 309 Rtos Memory Pool Error
+ RTOS_TIMER_EVENT 310 Rtos Timer Error
+ RTOS_EVENT_FLAGS_EVENT 311 Rtos Event flags Error
+ RTOS_MESSAGE_QUEUE_EVENT 312 Rtos Message queue Error
+ DEVICE_BUSY 313 Device Busy
+ CONFIG_UNSUPPORTED 314 Configuration not supported
+ CONFIG_MISMATCH 315 Configuration mismatch
+ ALREADY_INITIALIZED 316 Already initialzied
+ HARDFAULT_EXCEPTION 317 HardFault exception
+ MEMMANAGE_EXCEPTION 318 MemManage exception
+ BUSFAULT_EXCEPTION 319 BusFault exception
USAGEFAULT_EXCEPTION 320 UsageFault exception
\endverbatim
*
@@ -536,23 +541,23 @@
* ERROR_MY_CUSTOM_ERROR = 0xA0FF1001\n (Note that MODULE field is set to MBED_MODULE_UNKNOWN) \n\n
*
* @note
- * **Using error codes:** \n
+ * **Using error codes:** \n
* Posix error codes may be used in modules/functions currently using Posix error codes and switching them to Mbed-OS error codes
- * may cause interoperability issues. For example, some of the filesystem, network stack implementations may need to use
- * Posix error codes in order to keep them compatible with other modules interfacing with them, and may continue to use Posix error codes.
- *
+ * may cause interoperability issues. For example, some of the filesystem, network stack implementations may need to use
+ * Posix error codes in order to keep them compatible with other modules interfacing with them, and may continue to use Posix error codes.
+ *
* In all other cases, like for any native development of Mbed-OS modules Mbed-OS error codes should be used.
* This makes it easy to use Mbed-OS error reporting/logging infrastructure and makes debugging error scenarios
* much more efficient.
- *
+ *
* @note
* **Searching for error codes in mbed-os source tree:** \n
* If you get an error report as below which you want to search for in mbed-os source tree, first take note of "Error Code" number. \n
* For example, the below error report has an error code of \b 259. Find the error name associated with the error code and in this case its \b INVALID_FORMAT. \n
- * Use that error name(\b INVALID_FORMAT) to search the source tree for code locations setting that specific error code. \n
+ * Use that error name(\b INVALID_FORMAT) to search the source tree for code locations setting that specific error code. \n
* If the Error module reported is not 255(which indicates unknown module), you can also use that to narrow down to the specific component reporting the error.
* See mbed_module_type_t enum above for module mapping. \n
- *
+ *
* \verbatim
++ MbedOS Error Info ++
Error Status: 0x80040103
@@ -565,222 +570,221 @@
-- MbedOS Error Info --
\endverbatim
*/
-
-typedef enum _mbed_error_code
-{
+
+typedef enum _mbed_error_code {
//Below are POSIX ERROR CODE definitions, which starts at MBED_POSIX_ERROR_BASE(=0)
//POSIX ERROR CODE definitions starts at offset 0(MBED_POSIX_ERROR_BASE) to align them with actual Posix Error Code
//defintions in mbed_retarget.h
// Error Name Error Code
- MBED_DEFINE_POSIX_ERROR( EPERM ,EPERM ), /* 1 Operation not permitted */
- MBED_DEFINE_POSIX_ERROR( ENOENT ,ENOENT ), /* 2 No such file or directory */
- MBED_DEFINE_POSIX_ERROR( ESRCH ,ESRCH ), /* 3 No such process */
- MBED_DEFINE_POSIX_ERROR( EINTR ,EINTR ), /* 4 Interrupted system call */
- MBED_DEFINE_POSIX_ERROR( EIO ,EIO ), /* 5 I/O error */
- MBED_DEFINE_POSIX_ERROR( ENXIO ,ENXIO ), /* 6 No such device or address */
- MBED_DEFINE_POSIX_ERROR( E2BIG ,E2BIG ), /* 7 Argument list too long */
- MBED_DEFINE_POSIX_ERROR( ENOEXEC ,ENOEXEC ), /* 8 Exec format error */
- MBED_DEFINE_POSIX_ERROR( EBADF ,EBADF ), /* 9 Bad file number */
- MBED_DEFINE_POSIX_ERROR( ECHILD ,ECHILD ), /* 10 No child processes */
- MBED_DEFINE_POSIX_ERROR( EAGAIN ,EAGAIN ), /* 11 Try again */
- MBED_DEFINE_POSIX_ERROR( ENOMEM ,ENOMEM ), /* 12 Out of memory */
- MBED_DEFINE_POSIX_ERROR( EACCES ,EACCES ), /* 13 Permission denied */
- MBED_DEFINE_POSIX_ERROR( EFAULT ,EFAULT ), /* 14 Bad address */
- MBED_DEFINE_POSIX_ERROR( ENOTBLK ,ENOTBLK ), /* 15 Block device required */
- MBED_DEFINE_POSIX_ERROR( EBUSY ,EBUSY ), /* 16 Device or resource busy */
- MBED_DEFINE_POSIX_ERROR( EEXIST ,EEXIST ), /* 17 File exists */
- MBED_DEFINE_POSIX_ERROR( EXDEV ,EXDEV ), /* 18 Cross-device link */
- MBED_DEFINE_POSIX_ERROR( ENODEV ,ENODEV ), /* 19 No such device */
- MBED_DEFINE_POSIX_ERROR( ENOTDIR ,ENOTDIR ), /* 20 Not a directory */
- MBED_DEFINE_POSIX_ERROR( EISDIR ,EISDIR ), /* 21 Is a directory */
- MBED_DEFINE_POSIX_ERROR( EINVAL ,EINVAL ), /* 22 Invalid argument */
- MBED_DEFINE_POSIX_ERROR( ENFILE ,ENFILE ), /* 23 File table overflow */
- MBED_DEFINE_POSIX_ERROR( EMFILE ,EMFILE ), /* 24 Too many open files */
- MBED_DEFINE_POSIX_ERROR( ENOTTY ,ENOTTY ), /* 25 Not a typewriter */
- MBED_DEFINE_POSIX_ERROR( ETXTBSY ,ETXTBSY ), /* 26 Text file busy */
- MBED_DEFINE_POSIX_ERROR( EFBIG ,EFBIG ), /* 27 File too large */
- MBED_DEFINE_POSIX_ERROR( ENOSPC ,ENOSPC ), /* 28 No space left on device */
- MBED_DEFINE_POSIX_ERROR( ESPIPE ,ESPIPE ), /* 29 Illegal seek */
- MBED_DEFINE_POSIX_ERROR( EROFS ,EROFS ), /* 30 Read-only file system */
- MBED_DEFINE_POSIX_ERROR( EMLINK ,EMLINK ), /* 31 Too many links */
- MBED_DEFINE_POSIX_ERROR( EPIPE ,EPIPE ), /* 32 Broken pipe */
- MBED_DEFINE_POSIX_ERROR( EDOM ,EDOM ), /* 33 Math argument out of domain of func */
- MBED_DEFINE_POSIX_ERROR( ERANGE ,ERANGE ), /* 34 Math result not representable */
- MBED_DEFINE_POSIX_ERROR( EDEADLK ,EDEADLK ), /* 35 Resource deadlock would occur */
- MBED_DEFINE_POSIX_ERROR( ENAMETOOLONG ,ENAMETOOLONG ), /* 36 File name too long */
- MBED_DEFINE_POSIX_ERROR( ENOLCK ,ENOLCK ), /* 37 No record locks available */
- MBED_DEFINE_POSIX_ERROR( ENOSYS ,ENOSYS ), /* 38 Function not implemented */
- MBED_DEFINE_POSIX_ERROR( ENOTEMPTY ,ENOTEMPTY ), /* 39 Directory not empty */
- MBED_DEFINE_POSIX_ERROR( ELOOP ,ELOOP ), /* 40 Too many symbolic links encountered */
- MBED_DEFINE_POSIX_ERROR( EWOULDBLOCK ,EAGAIN ), /* EAGAIN Operation would block */
- MBED_DEFINE_POSIX_ERROR( ENOMSG ,ENOMSG ), /* 42 No message of desired type */
- MBED_DEFINE_POSIX_ERROR( EIDRM ,EIDRM ), /* 43 Identifier removed */
- MBED_DEFINE_POSIX_ERROR( ECHRNG ,ECHRNG ), /* 44 Channel number out of range */
- MBED_DEFINE_POSIX_ERROR( EL2NSYNC ,EL2NSYNC ), /* 45 Level 2 not synchronized */
- MBED_DEFINE_POSIX_ERROR( EL3HLT ,EL3HLT ), /* 46 Level 3 halted */
- MBED_DEFINE_POSIX_ERROR( EL3RST ,EL3RST ), /* 47 Level 3 reset */
- MBED_DEFINE_POSIX_ERROR( ELNRNG ,ELNRNG ), /* 48 Link number out of range */
- MBED_DEFINE_POSIX_ERROR( EUNATCH ,EUNATCH ), /* 49 Protocol driver not attached */
- MBED_DEFINE_POSIX_ERROR( ENOCSI ,ENOCSI ), /* 50 No CSI structure available */
- MBED_DEFINE_POSIX_ERROR( EL2HLT ,EL2HLT ), /* 51 Level 2 halted */
- MBED_DEFINE_POSIX_ERROR( EBADE ,EBADE ), /* 52 Invalid exchange */
- MBED_DEFINE_POSIX_ERROR( EBADR ,EBADR ), /* 53 Invalid request descriptor */
- MBED_DEFINE_POSIX_ERROR( EXFULL ,EXFULL ), /* 54 Exchange full */
- MBED_DEFINE_POSIX_ERROR( ENOANO ,ENOANO ), /* 55 No anode */
- MBED_DEFINE_POSIX_ERROR( EBADRQC ,EBADRQC ), /* 56 Invalid request code */
- MBED_DEFINE_POSIX_ERROR( EBADSLT ,EBADSLT ), /* 57 Invalid slot */
- MBED_DEFINE_POSIX_ERROR( EDEADLOCK ,EDEADLK ), /* EDEADLK Resource deadlock would occur */
- MBED_DEFINE_POSIX_ERROR( EBFONT ,EBFONT ), /* 59 Bad font file format */
- MBED_DEFINE_POSIX_ERROR( ENOSTR ,ENOSTR ), /* 60 Device not a stream */
- MBED_DEFINE_POSIX_ERROR( ENODATA ,ENODATA ), /* 61 No data available */
- MBED_DEFINE_POSIX_ERROR( ETIME ,ETIME ), /* 62 Timer expired */
- MBED_DEFINE_POSIX_ERROR( ENOSR ,ENOSR ), /* 63 Out of streams resources */
- MBED_DEFINE_POSIX_ERROR( ENONET ,ENONET ), /* 64 Machine is not on the network */
- MBED_DEFINE_POSIX_ERROR( ENOPKG ,ENOPKG ), /* 65 Package not installed */
- MBED_DEFINE_POSIX_ERROR( EREMOTE ,EREMOTE ), /* 66 Object is remote */
- MBED_DEFINE_POSIX_ERROR( ENOLINK ,ENOLINK ), /* 67 Link has been severed */
- MBED_DEFINE_POSIX_ERROR( EADV ,EADV ), /* 68 Advertise error */
- MBED_DEFINE_POSIX_ERROR( ESRMNT ,ESRMNT ), /* 69 Srmount error */
- MBED_DEFINE_POSIX_ERROR( ECOMM ,ECOMM ), /* 70 Communication error on send */
- MBED_DEFINE_POSIX_ERROR( EPROTO ,EPROTO ), /* 71 Protocol error */
- MBED_DEFINE_POSIX_ERROR( EMULTIHOP ,EMULTIHOP ), /* 72 Multihop attempted */
- MBED_DEFINE_POSIX_ERROR( EDOTDOT ,EDOTDOT ), /* 73 RFS specific error */
- MBED_DEFINE_POSIX_ERROR( EBADMSG ,EBADMSG ), /* 74 Not a data message */
- MBED_DEFINE_POSIX_ERROR( EOVERFLOW ,EOVERFLOW ), /* 75 Value too large for defined data type */
- MBED_DEFINE_POSIX_ERROR( ENOTUNIQ ,ENOTUNIQ ), /* 76 Name not unique on network */
- MBED_DEFINE_POSIX_ERROR( EBADFD ,EBADFD ), /* 77 File descriptor in bad state */
- MBED_DEFINE_POSIX_ERROR( EREMCHG ,EREMCHG ), /* 78 Remote address changed */
- MBED_DEFINE_POSIX_ERROR( ELIBACC ,ELIBACC ), /* 79 Can not access a needed shared library */
- MBED_DEFINE_POSIX_ERROR( ELIBBAD ,ELIBBAD ), /* 80 Accessing a corrupted shared library */
- MBED_DEFINE_POSIX_ERROR( ELIBSCN ,ELIBSCN ), /* 81 .lib section in a.out corrupted */
- MBED_DEFINE_POSIX_ERROR( ELIBMAX ,ELIBMAX ), /* 82 Attempting to link in too many shared libraries */
- MBED_DEFINE_POSIX_ERROR( ELIBEXEC ,ELIBEXEC ), /* 83 Cannot exec a shared library directly */
- MBED_DEFINE_POSIX_ERROR( EILSEQ ,EILSEQ ), /* 84 Illegal byte sequence */
- MBED_DEFINE_POSIX_ERROR( ERESTART ,ERESTART ), /* 85 Interrupted system call should be restarted */
- MBED_DEFINE_POSIX_ERROR( ESTRPIPE ,ESTRPIPE ), /* 86 Streams pipe error */
- MBED_DEFINE_POSIX_ERROR( EUSERS ,EUSERS ), /* 87 Too many users */
- MBED_DEFINE_POSIX_ERROR( ENOTSOCK ,ENOTSOCK ), /* 88 Socket operation on non-socket */
- MBED_DEFINE_POSIX_ERROR( EDESTADDRREQ ,EDESTADDRREQ ), /* 89 Destination address required */
- MBED_DEFINE_POSIX_ERROR( EMSGSIZE ,EMSGSIZE ), /* 90 Message too long */
- MBED_DEFINE_POSIX_ERROR( EPROTOTYPE ,EPROTOTYPE ), /* 91 Protocol wrong type for socket */
- MBED_DEFINE_POSIX_ERROR( ENOPROTOOPT ,ENOPROTOOPT ), /* 92 Protocol not available */
- MBED_DEFINE_POSIX_ERROR( EPROTONOSUPPORT ,EPROTONOSUPPORT ), /* 93 Protocol not supported */
- MBED_DEFINE_POSIX_ERROR( ESOCKTNOSUPPORT ,ESOCKTNOSUPPORT ), /* 94 Socket type not supported */
- MBED_DEFINE_POSIX_ERROR( EOPNOTSUPP ,EOPNOTSUPP ), /* 95 Operation not supported on transport endpoint */
- MBED_DEFINE_POSIX_ERROR( EPFNOSUPPORT ,EPFNOSUPPORT ), /* 96 Protocol family not supported */
- MBED_DEFINE_POSIX_ERROR( EAFNOSUPPORT ,EAFNOSUPPORT ), /* 97 Address family not supported by protocol */
- MBED_DEFINE_POSIX_ERROR( EADDRINUSE ,EADDRINUSE ), /* 98 Address already in use */
- MBED_DEFINE_POSIX_ERROR( EADDRNOTAVAIL ,EADDRNOTAVAIL ), /* 99 Cannot assign requested address */
- MBED_DEFINE_POSIX_ERROR( ENETDOWN ,ENETDOWN ), /* 100 Network is down */
- MBED_DEFINE_POSIX_ERROR( ENETUNREACH ,ENETUNREACH ), /* 101 Network is unreachable */
- MBED_DEFINE_POSIX_ERROR( ENETRESET ,ENETRESET ), /* 102 Network dropped connection because of reset */
- MBED_DEFINE_POSIX_ERROR( ECONNABORTED ,ECONNABORTED ), /* 103 Software caused connection abort */
- MBED_DEFINE_POSIX_ERROR( ECONNRESET ,ECONNRESET ), /* 104 Connection reset by peer */
- MBED_DEFINE_POSIX_ERROR( ENOBUFS ,ENOBUFS ), /* 105 No buffer space available */
- MBED_DEFINE_POSIX_ERROR( EISCONN ,EISCONN ), /* 106 Transport endpoint is already connected */
- MBED_DEFINE_POSIX_ERROR( ENOTCONN ,ENOTCONN ), /* 107 Transport endpoint is not connected */
- MBED_DEFINE_POSIX_ERROR( ESHUTDOWN ,ESHUTDOWN ), /* 108 Cannot send after transport endpoint shutdown */
- MBED_DEFINE_POSIX_ERROR( ETOOMANYREFS ,ETOOMANYREFS ), /* 109 Too many references: cannot splice */
- MBED_DEFINE_POSIX_ERROR( ETIMEDOUT ,ETIMEDOUT ), /* 110 Connection timed out */
- MBED_DEFINE_POSIX_ERROR( ECONNREFUSED ,ECONNREFUSED ), /* 111 Connection refused */
- MBED_DEFINE_POSIX_ERROR( EHOSTDOWN ,EHOSTDOWN ), /* 112 Host is down */
- MBED_DEFINE_POSIX_ERROR( EHOSTUNREACH ,EHOSTUNREACH ), /* 113 No route to host */
- MBED_DEFINE_POSIX_ERROR( EALREADY ,EALREADY ), /* 114 Operation already in progress */
- MBED_DEFINE_POSIX_ERROR( EINPROGRESS ,EINPROGRESS ), /* 115 Operation now in progress */
- MBED_DEFINE_POSIX_ERROR( ESTALE ,ESTALE ), /* 116 Stale NFS file handle */
- MBED_DEFINE_POSIX_ERROR( EUCLEAN ,EUCLEAN ), /* 117 Structure needs cleaning */
- MBED_DEFINE_POSIX_ERROR( ENOTNAM ,ENOTNAM ), /* 118 Not a XENIX named type file */
- MBED_DEFINE_POSIX_ERROR( ENAVAIL ,ENAVAIL ), /* 119 No XENIX semaphores available */
- MBED_DEFINE_POSIX_ERROR( EISNAM ,EISNAM ), /* 120 Is a named type file */
- MBED_DEFINE_POSIX_ERROR( EREMOTEIO ,EREMOTEIO ), /* 121 Remote I/O error */
- MBED_DEFINE_POSIX_ERROR( EDQUOT ,EDQUOT ), /* 122 Quota exceeded */
- MBED_DEFINE_POSIX_ERROR( ENOMEDIUM ,ENOMEDIUM ), /* 123 No medium found */
- MBED_DEFINE_POSIX_ERROR( EMEDIUMTYPE ,EMEDIUMTYPE ), /* 124 Wrong medium type */
- MBED_DEFINE_POSIX_ERROR( ECANCELED ,ECANCELED ), /* 125 Operation Canceled */
- MBED_DEFINE_POSIX_ERROR( ENOKEY ,ENOKEY ), /* 126 Required key not available */
- MBED_DEFINE_POSIX_ERROR( EKEYEXPIRED ,EKEYEXPIRED ), /* 127 Key has expired */
- MBED_DEFINE_POSIX_ERROR( EKEYREVOKED ,EKEYREVOKED ), /* 128 Key has been revoked */
- MBED_DEFINE_POSIX_ERROR( EKEYREJECTED ,EKEYREJECTED ), /* 129 Key was rejected by service */
- MBED_DEFINE_POSIX_ERROR( EOWNERDEAD ,EOWNERDEAD ), /* 130 Owner died */
- MBED_DEFINE_POSIX_ERROR( ENOTRECOVERABLE ,ENOTRECOVERABLE ), /* 131 State not recoverable */
-
+ MBED_DEFINE_POSIX_ERROR(EPERM, EPERM), /* 1 Operation not permitted */
+ MBED_DEFINE_POSIX_ERROR(ENOENT, ENOENT), /* 2 No such file or directory */
+ MBED_DEFINE_POSIX_ERROR(ESRCH, ESRCH), /* 3 No such process */
+ MBED_DEFINE_POSIX_ERROR(EINTR, EINTR), /* 4 Interrupted system call */
+ MBED_DEFINE_POSIX_ERROR(EIO, EIO), /* 5 I/O error */
+ MBED_DEFINE_POSIX_ERROR(ENXIO, ENXIO), /* 6 No such device or address */
+ MBED_DEFINE_POSIX_ERROR(E2BIG, E2BIG), /* 7 Argument list too long */
+ MBED_DEFINE_POSIX_ERROR(ENOEXEC, ENOEXEC), /* 8 Exec format error */
+ MBED_DEFINE_POSIX_ERROR(EBADF, EBADF), /* 9 Bad file number */
+ MBED_DEFINE_POSIX_ERROR(ECHILD, ECHILD), /* 10 No child processes */
+ MBED_DEFINE_POSIX_ERROR(EAGAIN, EAGAIN), /* 11 Try again */
+ MBED_DEFINE_POSIX_ERROR(ENOMEM, ENOMEM), /* 12 Out of memory */
+ MBED_DEFINE_POSIX_ERROR(EACCES, EACCES), /* 13 Permission denied */
+ MBED_DEFINE_POSIX_ERROR(EFAULT, EFAULT), /* 14 Bad address */
+ MBED_DEFINE_POSIX_ERROR(ENOTBLK, ENOTBLK), /* 15 Block device required */
+ MBED_DEFINE_POSIX_ERROR(EBUSY, EBUSY), /* 16 Device or resource busy */
+ MBED_DEFINE_POSIX_ERROR(EEXIST, EEXIST), /* 17 File exists */
+ MBED_DEFINE_POSIX_ERROR(EXDEV, EXDEV), /* 18 Cross-device link */
+ MBED_DEFINE_POSIX_ERROR(ENODEV, ENODEV), /* 19 No such device */
+ MBED_DEFINE_POSIX_ERROR(ENOTDIR, ENOTDIR), /* 20 Not a directory */
+ MBED_DEFINE_POSIX_ERROR(EISDIR, EISDIR), /* 21 Is a directory */
+ MBED_DEFINE_POSIX_ERROR(EINVAL, EINVAL), /* 22 Invalid argument */
+ MBED_DEFINE_POSIX_ERROR(ENFILE, ENFILE), /* 23 File table overflow */
+ MBED_DEFINE_POSIX_ERROR(EMFILE, EMFILE), /* 24 Too many open files */
+ MBED_DEFINE_POSIX_ERROR(ENOTTY, ENOTTY), /* 25 Not a typewriter */
+ MBED_DEFINE_POSIX_ERROR(ETXTBSY, ETXTBSY), /* 26 Text file busy */
+ MBED_DEFINE_POSIX_ERROR(EFBIG, EFBIG), /* 27 File too large */
+ MBED_DEFINE_POSIX_ERROR(ENOSPC, ENOSPC), /* 28 No space left on device */
+ MBED_DEFINE_POSIX_ERROR(ESPIPE, ESPIPE), /* 29 Illegal seek */
+ MBED_DEFINE_POSIX_ERROR(EROFS, EROFS), /* 30 Read-only file system */
+ MBED_DEFINE_POSIX_ERROR(EMLINK, EMLINK), /* 31 Too many links */
+ MBED_DEFINE_POSIX_ERROR(EPIPE, EPIPE), /* 32 Broken pipe */
+ MBED_DEFINE_POSIX_ERROR(EDOM, EDOM), /* 33 Math argument out of domain of func */
+ MBED_DEFINE_POSIX_ERROR(ERANGE, ERANGE), /* 34 Math result not representable */
+ MBED_DEFINE_POSIX_ERROR(EDEADLK, EDEADLK), /* 35 Resource deadlock would occur */
+ MBED_DEFINE_POSIX_ERROR(ENAMETOOLONG, ENAMETOOLONG), /* 36 File name too long */
+ MBED_DEFINE_POSIX_ERROR(ENOLCK, ENOLCK), /* 37 No record locks available */
+ MBED_DEFINE_POSIX_ERROR(ENOSYS, ENOSYS), /* 38 Function not implemented */
+ MBED_DEFINE_POSIX_ERROR(ENOTEMPTY, ENOTEMPTY), /* 39 Directory not empty */
+ MBED_DEFINE_POSIX_ERROR(ELOOP, ELOOP), /* 40 Too many symbolic links encountered */
+ MBED_DEFINE_POSIX_ERROR(EWOULDBLOCK, EAGAIN), /* EAGAIN Operation would block */
+ MBED_DEFINE_POSIX_ERROR(ENOMSG, ENOMSG), /* 42 No message of desired type */
+ MBED_DEFINE_POSIX_ERROR(EIDRM, EIDRM), /* 43 Identifier removed */
+ MBED_DEFINE_POSIX_ERROR(ECHRNG, ECHRNG), /* 44 Channel number out of range */
+ MBED_DEFINE_POSIX_ERROR(EL2NSYNC, EL2NSYNC), /* 45 Level 2 not synchronized */
+ MBED_DEFINE_POSIX_ERROR(EL3HLT, EL3HLT), /* 46 Level 3 halted */
+ MBED_DEFINE_POSIX_ERROR(EL3RST, EL3RST), /* 47 Level 3 reset */
+ MBED_DEFINE_POSIX_ERROR(ELNRNG, ELNRNG), /* 48 Link number out of range */
+ MBED_DEFINE_POSIX_ERROR(EUNATCH, EUNATCH), /* 49 Protocol driver not attached */
+ MBED_DEFINE_POSIX_ERROR(ENOCSI, ENOCSI), /* 50 No CSI structure available */
+ MBED_DEFINE_POSIX_ERROR(EL2HLT, EL2HLT), /* 51 Level 2 halted */
+ MBED_DEFINE_POSIX_ERROR(EBADE, EBADE), /* 52 Invalid exchange */
+ MBED_DEFINE_POSIX_ERROR(EBADR, EBADR), /* 53 Invalid request descriptor */
+ MBED_DEFINE_POSIX_ERROR(EXFULL, EXFULL), /* 54 Exchange full */
+ MBED_DEFINE_POSIX_ERROR(ENOANO, ENOANO), /* 55 No anode */
+ MBED_DEFINE_POSIX_ERROR(EBADRQC, EBADRQC), /* 56 Invalid request code */
+ MBED_DEFINE_POSIX_ERROR(EBADSLT, EBADSLT), /* 57 Invalid slot */
+ MBED_DEFINE_POSIX_ERROR(EDEADLOCK, EDEADLK), /* EDEADLK Resource deadlock would occur */
+ MBED_DEFINE_POSIX_ERROR(EBFONT, EBFONT), /* 59 Bad font file format */
+ MBED_DEFINE_POSIX_ERROR(ENOSTR, ENOSTR), /* 60 Device not a stream */
+ MBED_DEFINE_POSIX_ERROR(ENODATA, ENODATA), /* 61 No data available */
+ MBED_DEFINE_POSIX_ERROR(ETIME, ETIME), /* 62 Timer expired */
+ MBED_DEFINE_POSIX_ERROR(ENOSR, ENOSR), /* 63 Out of streams resources */
+ MBED_DEFINE_POSIX_ERROR(ENONET, ENONET), /* 64 Machine is not on the network */
+ MBED_DEFINE_POSIX_ERROR(ENOPKG, ENOPKG), /* 65 Package not installed */
+ MBED_DEFINE_POSIX_ERROR(EREMOTE, EREMOTE), /* 66 Object is remote */
+ MBED_DEFINE_POSIX_ERROR(ENOLINK, ENOLINK), /* 67 Link has been severed */
+ MBED_DEFINE_POSIX_ERROR(EADV, EADV), /* 68 Advertise error */
+ MBED_DEFINE_POSIX_ERROR(ESRMNT, ESRMNT), /* 69 Srmount error */
+ MBED_DEFINE_POSIX_ERROR(ECOMM, ECOMM), /* 70 Communication error on send */
+ MBED_DEFINE_POSIX_ERROR(EPROTO, EPROTO), /* 71 Protocol error */
+ MBED_DEFINE_POSIX_ERROR(EMULTIHOP, EMULTIHOP), /* 72 Multihop attempted */
+ MBED_DEFINE_POSIX_ERROR(EDOTDOT, EDOTDOT), /* 73 RFS specific error */
+ MBED_DEFINE_POSIX_ERROR(EBADMSG, EBADMSG), /* 74 Not a data message */
+ MBED_DEFINE_POSIX_ERROR(EOVERFLOW, EOVERFLOW), /* 75 Value too large for defined data type */
+ MBED_DEFINE_POSIX_ERROR(ENOTUNIQ, ENOTUNIQ), /* 76 Name not unique on network */
+ MBED_DEFINE_POSIX_ERROR(EBADFD, EBADFD), /* 77 File descriptor in bad state */
+ MBED_DEFINE_POSIX_ERROR(EREMCHG, EREMCHG), /* 78 Remote address changed */
+ MBED_DEFINE_POSIX_ERROR(ELIBACC, ELIBACC), /* 79 Can not access a needed shared library */
+ MBED_DEFINE_POSIX_ERROR(ELIBBAD, ELIBBAD), /* 80 Accessing a corrupted shared library */
+ MBED_DEFINE_POSIX_ERROR(ELIBSCN, ELIBSCN), /* 81 .lib section in a.out corrupted */
+ MBED_DEFINE_POSIX_ERROR(ELIBMAX, ELIBMAX), /* 82 Attempting to link in too many shared libraries */
+ MBED_DEFINE_POSIX_ERROR(ELIBEXEC, ELIBEXEC), /* 83 Cannot exec a shared library directly */
+ MBED_DEFINE_POSIX_ERROR(EILSEQ, EILSEQ), /* 84 Illegal byte sequence */
+ MBED_DEFINE_POSIX_ERROR(ERESTART, ERESTART), /* 85 Interrupted system call should be restarted */
+ MBED_DEFINE_POSIX_ERROR(ESTRPIPE, ESTRPIPE), /* 86 Streams pipe error */
+ MBED_DEFINE_POSIX_ERROR(EUSERS, EUSERS), /* 87 Too many users */
+ MBED_DEFINE_POSIX_ERROR(ENOTSOCK, ENOTSOCK), /* 88 Socket operation on non-socket */
+ MBED_DEFINE_POSIX_ERROR(EDESTADDRREQ, EDESTADDRREQ), /* 89 Destination address required */
+ MBED_DEFINE_POSIX_ERROR(EMSGSIZE, EMSGSIZE), /* 90 Message too long */
+ MBED_DEFINE_POSIX_ERROR(EPROTOTYPE, EPROTOTYPE), /* 91 Protocol wrong type for socket */
+ MBED_DEFINE_POSIX_ERROR(ENOPROTOOPT, ENOPROTOOPT), /* 92 Protocol not available */
+ MBED_DEFINE_POSIX_ERROR(EPROTONOSUPPORT, EPROTONOSUPPORT), /* 93 Protocol not supported */
+ MBED_DEFINE_POSIX_ERROR(ESOCKTNOSUPPORT, ESOCKTNOSUPPORT), /* 94 Socket type not supported */
+ MBED_DEFINE_POSIX_ERROR(EOPNOTSUPP, EOPNOTSUPP), /* 95 Operation not supported on transport endpoint */
+ MBED_DEFINE_POSIX_ERROR(EPFNOSUPPORT, EPFNOSUPPORT), /* 96 Protocol family not supported */
+ MBED_DEFINE_POSIX_ERROR(EAFNOSUPPORT, EAFNOSUPPORT), /* 97 Address family not supported by protocol */
+ MBED_DEFINE_POSIX_ERROR(EADDRINUSE, EADDRINUSE), /* 98 Address already in use */
+ MBED_DEFINE_POSIX_ERROR(EADDRNOTAVAIL, EADDRNOTAVAIL), /* 99 Cannot assign requested address */
+ MBED_DEFINE_POSIX_ERROR(ENETDOWN, ENETDOWN), /* 100 Network is down */
+ MBED_DEFINE_POSIX_ERROR(ENETUNREACH, ENETUNREACH), /* 101 Network is unreachable */
+ MBED_DEFINE_POSIX_ERROR(ENETRESET, ENETRESET), /* 102 Network dropped connection because of reset */
+ MBED_DEFINE_POSIX_ERROR(ECONNABORTED, ECONNABORTED), /* 103 Software caused connection abort */
+ MBED_DEFINE_POSIX_ERROR(ECONNRESET, ECONNRESET), /* 104 Connection reset by peer */
+ MBED_DEFINE_POSIX_ERROR(ENOBUFS, ENOBUFS), /* 105 No buffer space available */
+ MBED_DEFINE_POSIX_ERROR(EISCONN, EISCONN), /* 106 Transport endpoint is already connected */
+ MBED_DEFINE_POSIX_ERROR(ENOTCONN, ENOTCONN), /* 107 Transport endpoint is not connected */
+ MBED_DEFINE_POSIX_ERROR(ESHUTDOWN, ESHUTDOWN), /* 108 Cannot send after transport endpoint shutdown */
+ MBED_DEFINE_POSIX_ERROR(ETOOMANYREFS, ETOOMANYREFS), /* 109 Too many references: cannot splice */
+ MBED_DEFINE_POSIX_ERROR(ETIMEDOUT, ETIMEDOUT), /* 110 Connection timed out */
+ MBED_DEFINE_POSIX_ERROR(ECONNREFUSED, ECONNREFUSED), /* 111 Connection refused */
+ MBED_DEFINE_POSIX_ERROR(EHOSTDOWN, EHOSTDOWN), /* 112 Host is down */
+ MBED_DEFINE_POSIX_ERROR(EHOSTUNREACH, EHOSTUNREACH), /* 113 No route to host */
+ MBED_DEFINE_POSIX_ERROR(EALREADY, EALREADY), /* 114 Operation already in progress */
+ MBED_DEFINE_POSIX_ERROR(EINPROGRESS, EINPROGRESS), /* 115 Operation now in progress */
+ MBED_DEFINE_POSIX_ERROR(ESTALE, ESTALE), /* 116 Stale NFS file handle */
+ MBED_DEFINE_POSIX_ERROR(EUCLEAN, EUCLEAN), /* 117 Structure needs cleaning */
+ MBED_DEFINE_POSIX_ERROR(ENOTNAM, ENOTNAM), /* 118 Not a XENIX named type file */
+ MBED_DEFINE_POSIX_ERROR(ENAVAIL, ENAVAIL), /* 119 No XENIX semaphores available */
+ MBED_DEFINE_POSIX_ERROR(EISNAM, EISNAM), /* 120 Is a named type file */
+ MBED_DEFINE_POSIX_ERROR(EREMOTEIO, EREMOTEIO), /* 121 Remote I/O error */
+ MBED_DEFINE_POSIX_ERROR(EDQUOT, EDQUOT), /* 122 Quota exceeded */
+ MBED_DEFINE_POSIX_ERROR(ENOMEDIUM, ENOMEDIUM), /* 123 No medium found */
+ MBED_DEFINE_POSIX_ERROR(EMEDIUMTYPE, EMEDIUMTYPE), /* 124 Wrong medium type */
+ MBED_DEFINE_POSIX_ERROR(ECANCELED, ECANCELED), /* 125 Operation Canceled */
+ MBED_DEFINE_POSIX_ERROR(ENOKEY, ENOKEY), /* 126 Required key not available */
+ MBED_DEFINE_POSIX_ERROR(EKEYEXPIRED, EKEYEXPIRED), /* 127 Key has expired */
+ MBED_DEFINE_POSIX_ERROR(EKEYREVOKED, EKEYREVOKED), /* 128 Key has been revoked */
+ MBED_DEFINE_POSIX_ERROR(EKEYREJECTED, EKEYREJECTED), /* 129 Key was rejected by service */
+ MBED_DEFINE_POSIX_ERROR(EOWNERDEAD, EOWNERDEAD), /* 130 Owner died */
+ MBED_DEFINE_POSIX_ERROR(ENOTRECOVERABLE, ENOTRECOVERABLE), /* 131 State not recoverable */
+
//Below are MBED SYSTEM ERROR CODE definitions
//MBED SYSTEM ERROR CODE definitions starts at offset MBED_SYSTEM_ERROR_BASE, see above.
// Error Name Error Offset Error Code
- MBED_DEFINE_SYSTEM_ERROR( UNKNOWN ,0 ), /* 256 Unknown error */
- MBED_DEFINE_SYSTEM_ERROR( INVALID_ARGUMENT ,1 ), /* 257 Invalid Argument */
- MBED_DEFINE_SYSTEM_ERROR( INVALID_DATA_DETECTED ,2 ), /* 258 Invalid data detected */
- MBED_DEFINE_SYSTEM_ERROR( INVALID_FORMAT ,3 ), /* 259 Invalid format */
- MBED_DEFINE_SYSTEM_ERROR( INVALID_INDEX ,4 ), /* 260 Invalid Index */
- MBED_DEFINE_SYSTEM_ERROR( INVALID_SIZE ,5 ), /* 261 Inavlid Size */
- MBED_DEFINE_SYSTEM_ERROR( INVALID_OPERATION ,6 ), /* 262 Invalid Operation */
- MBED_DEFINE_SYSTEM_ERROR( ITEM_NOT_FOUND ,7 ), /* 263 Item Not Found */
- MBED_DEFINE_SYSTEM_ERROR( ACCESS_DENIED ,8 ), /* 264 Access Denied */
- MBED_DEFINE_SYSTEM_ERROR( UNSUPPORTED ,9 ), /* 265 Unsupported */
- MBED_DEFINE_SYSTEM_ERROR( BUFFER_FULL ,10 ), /* 266 Buffer Full */
- MBED_DEFINE_SYSTEM_ERROR( MEDIA_FULL ,11 ), /* 267 Media/Disk Full */
- MBED_DEFINE_SYSTEM_ERROR( ALREADY_IN_USE ,12 ), /* 268 Already in use */
- MBED_DEFINE_SYSTEM_ERROR( TIME_OUT ,13 ), /* 269 Timeout error */
- MBED_DEFINE_SYSTEM_ERROR( NOT_READY ,14 ), /* 270 Not Ready */
- MBED_DEFINE_SYSTEM_ERROR( FAILED_OPERATION ,15 ), /* 271 Requested Operation failed */
- MBED_DEFINE_SYSTEM_ERROR( OPERATION_PROHIBITED ,16 ), /* 272 Operation prohibited */
- MBED_DEFINE_SYSTEM_ERROR( OPERATION_ABORTED ,17 ), /* 273 Operation failed */
- MBED_DEFINE_SYSTEM_ERROR( WRITE_PROTECTED ,18 ), /* 274 Attempt to write to write-protected resource */
- MBED_DEFINE_SYSTEM_ERROR( NO_RESPONSE ,19 ), /* 275 No response */
- MBED_DEFINE_SYSTEM_ERROR( SEMAPHORE_LOCK_FAILED ,20 ), /* 276 Sempahore lock failed */
- MBED_DEFINE_SYSTEM_ERROR( MUTEX_LOCK_FAILED ,21 ), /* 277 Mutex lock failed */
- MBED_DEFINE_SYSTEM_ERROR( SEMAPHORE_UNLOCK_FAILED ,22 ), /* 278 Sempahore unlock failed */
- MBED_DEFINE_SYSTEM_ERROR( MUTEX_UNLOCK_FAILED ,23 ), /* 279 Mutex unlock failed */
- MBED_DEFINE_SYSTEM_ERROR( CRC_ERROR ,24 ), /* 280 CRC error or mismatch */
- MBED_DEFINE_SYSTEM_ERROR( OPEN_FAILED ,25 ), /* 281 Open failed */
- MBED_DEFINE_SYSTEM_ERROR( CLOSE_FAILED ,26 ), /* 282 Close failed */
- MBED_DEFINE_SYSTEM_ERROR( READ_FAILED ,27 ), /* 283 Read failed */
- MBED_DEFINE_SYSTEM_ERROR( WRITE_FAILED ,28 ), /* 284 Write failed */
- MBED_DEFINE_SYSTEM_ERROR( INITIALIZATION_FAILED ,29 ), /* 285 Initialization failed */
- MBED_DEFINE_SYSTEM_ERROR( BOOT_FAILURE ,30 ), /* 286 Boot failure */
- MBED_DEFINE_SYSTEM_ERROR( OUT_OF_MEMORY ,31 ), /* 287 Out of memory */
- MBED_DEFINE_SYSTEM_ERROR( OUT_OF_RESOURCES ,32 ), /* 288 Out of resources */
- MBED_DEFINE_SYSTEM_ERROR( ALLOC_FAILED ,33 ), /* 289 Alloc failed */
- MBED_DEFINE_SYSTEM_ERROR( FREE_FAILED ,34 ), /* 290 Free failed */
- MBED_DEFINE_SYSTEM_ERROR( OVERFLOW ,35 ), /* 291 Overflow error */
- MBED_DEFINE_SYSTEM_ERROR( UNDERFLOW ,36 ), /* 292 Underflow error */
- MBED_DEFINE_SYSTEM_ERROR( STACK_OVERFLOW ,37 ), /* 293 Stack overflow error */
- MBED_DEFINE_SYSTEM_ERROR( ISR_QUEUE_OVERFLOW ,38 ), /* 294 ISR queue overflow */
- MBED_DEFINE_SYSTEM_ERROR( TIMER_QUEUE_OVERFLOW ,39 ), /* 295 Timer Queue overflow */
- MBED_DEFINE_SYSTEM_ERROR( CLIB_SPACE_UNAVAILABLE ,40 ), /* 296 Standard library error - Space unavailable */
- MBED_DEFINE_SYSTEM_ERROR( CLIB_EXCEPTION ,41 ), /* 297 Standard library error - Exception */
- MBED_DEFINE_SYSTEM_ERROR( CLIB_MUTEX_INIT_FAILURE ,42 ), /* 298 Standard library error - Mutex Init failure */
- MBED_DEFINE_SYSTEM_ERROR( CREATE_FAILED ,43 ), /* 299 Create failed */
- MBED_DEFINE_SYSTEM_ERROR( DELETE_FAILED ,44 ), /* 300 Delete failed */
- MBED_DEFINE_SYSTEM_ERROR( THREAD_CREATE_FAILED ,45 ), /* 301 Thread Create failed */
- MBED_DEFINE_SYSTEM_ERROR( THREAD_DELETE_FAILED ,46 ), /* 302 Thread Delete failed */
- MBED_DEFINE_SYSTEM_ERROR( PROHIBITED_IN_ISR_CONTEXT ,47 ), /* 303 Operation Prohibited in ISR context */
- MBED_DEFINE_SYSTEM_ERROR( PINMAP_INVALID ,48 ), /* 304 Pinmap Invalid */
- MBED_DEFINE_SYSTEM_ERROR( RTOS_EVENT ,49 ), /* 305 Unknown Rtos Error */
- MBED_DEFINE_SYSTEM_ERROR( RTOS_THREAD_EVENT ,50 ), /* 306 Rtos Thread Error */
- MBED_DEFINE_SYSTEM_ERROR( RTOS_MUTEX_EVENT ,51 ), /* 307 Rtos Mutex Error */
- MBED_DEFINE_SYSTEM_ERROR( RTOS_SEMAPHORE_EVENT ,52 ), /* 308 Rtos Semaphore Error */
- MBED_DEFINE_SYSTEM_ERROR( RTOS_MEMORY_POOL_EVENT ,53 ), /* 309 Rtos Memory Pool Error */
- MBED_DEFINE_SYSTEM_ERROR( RTOS_TIMER_EVENT ,54 ), /* 310 Rtos Timer Error */
- MBED_DEFINE_SYSTEM_ERROR( RTOS_EVENT_FLAGS_EVENT ,55 ), /* 311 Rtos Event flags Error */
- MBED_DEFINE_SYSTEM_ERROR( RTOS_MESSAGE_QUEUE_EVENT ,56 ), /* 312 Rtos Message queue Error */
- MBED_DEFINE_SYSTEM_ERROR( DEVICE_BUSY ,57 ), /* 313 Device Busy */
- MBED_DEFINE_SYSTEM_ERROR( CONFIG_UNSUPPORTED ,58 ), /* 314 Configuration not supported */
- MBED_DEFINE_SYSTEM_ERROR( CONFIG_MISMATCH ,59 ), /* 315 Configuration mismatch */
- MBED_DEFINE_SYSTEM_ERROR( ALREADY_INITIALIZED ,60 ), /* 316 Already initialzied */
- MBED_DEFINE_SYSTEM_ERROR( HARDFAULT_EXCEPTION ,61 ), /* 317 HardFault exception */
- MBED_DEFINE_SYSTEM_ERROR( MEMMANAGE_EXCEPTION ,62 ), /* 318 MemManage exception */
- MBED_DEFINE_SYSTEM_ERROR( BUSFAULT_EXCEPTION ,63 ), /* 319 BusFault exception */
- MBED_DEFINE_SYSTEM_ERROR( USAGEFAULT_EXCEPTION ,64 ), /* 320 UsageFault exception*/
-
+ MBED_DEFINE_SYSTEM_ERROR(UNKNOWN, 0), /* 256 Unknown error */
+ MBED_DEFINE_SYSTEM_ERROR(INVALID_ARGUMENT, 1), /* 257 Invalid Argument */
+ MBED_DEFINE_SYSTEM_ERROR(INVALID_DATA_DETECTED, 2), /* 258 Invalid data detected */
+ MBED_DEFINE_SYSTEM_ERROR(INVALID_FORMAT, 3), /* 259 Invalid format */
+ MBED_DEFINE_SYSTEM_ERROR(INVALID_INDEX, 4), /* 260 Invalid Index */
+ MBED_DEFINE_SYSTEM_ERROR(INVALID_SIZE, 5), /* 261 Inavlid Size */
+ MBED_DEFINE_SYSTEM_ERROR(INVALID_OPERATION, 6), /* 262 Invalid Operation */
+ MBED_DEFINE_SYSTEM_ERROR(ITEM_NOT_FOUND, 7), /* 263 Item Not Found */
+ MBED_DEFINE_SYSTEM_ERROR(ACCESS_DENIED, 8), /* 264 Access Denied */
+ MBED_DEFINE_SYSTEM_ERROR(UNSUPPORTED, 9), /* 265 Unsupported */
+ MBED_DEFINE_SYSTEM_ERROR(BUFFER_FULL, 10), /* 266 Buffer Full */
+ MBED_DEFINE_SYSTEM_ERROR(MEDIA_FULL, 11), /* 267 Media/Disk Full */
+ MBED_DEFINE_SYSTEM_ERROR(ALREADY_IN_USE, 12), /* 268 Already in use */
+ MBED_DEFINE_SYSTEM_ERROR(TIME_OUT, 13), /* 269 Timeout error */
+ MBED_DEFINE_SYSTEM_ERROR(NOT_READY, 14), /* 270 Not Ready */
+ MBED_DEFINE_SYSTEM_ERROR(FAILED_OPERATION, 15), /* 271 Requested Operation failed */
+ MBED_DEFINE_SYSTEM_ERROR(OPERATION_PROHIBITED, 16), /* 272 Operation prohibited */
+ MBED_DEFINE_SYSTEM_ERROR(OPERATION_ABORTED, 17), /* 273 Operation failed */
+ MBED_DEFINE_SYSTEM_ERROR(WRITE_PROTECTED, 18), /* 274 Attempt to write to write-protected resource */
+ MBED_DEFINE_SYSTEM_ERROR(NO_RESPONSE, 19), /* 275 No response */
+ MBED_DEFINE_SYSTEM_ERROR(SEMAPHORE_LOCK_FAILED, 20), /* 276 Sempahore lock failed */
+ MBED_DEFINE_SYSTEM_ERROR(MUTEX_LOCK_FAILED, 21), /* 277 Mutex lock failed */
+ MBED_DEFINE_SYSTEM_ERROR(SEMAPHORE_UNLOCK_FAILED, 22), /* 278 Sempahore unlock failed */
+ MBED_DEFINE_SYSTEM_ERROR(MUTEX_UNLOCK_FAILED, 23), /* 279 Mutex unlock failed */
+ MBED_DEFINE_SYSTEM_ERROR(CRC_ERROR, 24), /* 280 CRC error or mismatch */
+ MBED_DEFINE_SYSTEM_ERROR(OPEN_FAILED, 25), /* 281 Open failed */
+ MBED_DEFINE_SYSTEM_ERROR(CLOSE_FAILED, 26), /* 282 Close failed */
+ MBED_DEFINE_SYSTEM_ERROR(READ_FAILED, 27), /* 283 Read failed */
+ MBED_DEFINE_SYSTEM_ERROR(WRITE_FAILED, 28), /* 284 Write failed */
+ MBED_DEFINE_SYSTEM_ERROR(INITIALIZATION_FAILED, 29), /* 285 Initialization failed */
+ MBED_DEFINE_SYSTEM_ERROR(BOOT_FAILURE, 30), /* 286 Boot failure */
+ MBED_DEFINE_SYSTEM_ERROR(OUT_OF_MEMORY, 31), /* 287 Out of memory */
+ MBED_DEFINE_SYSTEM_ERROR(OUT_OF_RESOURCES, 32), /* 288 Out of resources */
+ MBED_DEFINE_SYSTEM_ERROR(ALLOC_FAILED, 33), /* 289 Alloc failed */
+ MBED_DEFINE_SYSTEM_ERROR(FREE_FAILED, 34), /* 290 Free failed */
+ MBED_DEFINE_SYSTEM_ERROR(OVERFLOW, 35), /* 291 Overflow error */
+ MBED_DEFINE_SYSTEM_ERROR(UNDERFLOW, 36), /* 292 Underflow error */
+ MBED_DEFINE_SYSTEM_ERROR(STACK_OVERFLOW, 37), /* 293 Stack overflow error */
+ MBED_DEFINE_SYSTEM_ERROR(ISR_QUEUE_OVERFLOW, 38), /* 294 ISR queue overflow */
+ MBED_DEFINE_SYSTEM_ERROR(TIMER_QUEUE_OVERFLOW, 39), /* 295 Timer Queue overflow */
+ MBED_DEFINE_SYSTEM_ERROR(CLIB_SPACE_UNAVAILABLE, 40), /* 296 Standard library error - Space unavailable */
+ MBED_DEFINE_SYSTEM_ERROR(CLIB_EXCEPTION, 41), /* 297 Standard library error - Exception */
+ MBED_DEFINE_SYSTEM_ERROR(CLIB_MUTEX_INIT_FAILURE, 42), /* 298 Standard library error - Mutex Init failure */
+ MBED_DEFINE_SYSTEM_ERROR(CREATE_FAILED, 43), /* 299 Create failed */
+ MBED_DEFINE_SYSTEM_ERROR(DELETE_FAILED, 44), /* 300 Delete failed */
+ MBED_DEFINE_SYSTEM_ERROR(THREAD_CREATE_FAILED, 45), /* 301 Thread Create failed */
+ MBED_DEFINE_SYSTEM_ERROR(THREAD_DELETE_FAILED, 46), /* 302 Thread Delete failed */
+ MBED_DEFINE_SYSTEM_ERROR(PROHIBITED_IN_ISR_CONTEXT, 47), /* 303 Operation Prohibited in ISR context */
+ MBED_DEFINE_SYSTEM_ERROR(PINMAP_INVALID, 48), /* 304 Pinmap Invalid */
+ MBED_DEFINE_SYSTEM_ERROR(RTOS_EVENT, 49), /* 305 Unknown Rtos Error */
+ MBED_DEFINE_SYSTEM_ERROR(RTOS_THREAD_EVENT, 50), /* 306 Rtos Thread Error */
+ MBED_DEFINE_SYSTEM_ERROR(RTOS_MUTEX_EVENT, 51), /* 307 Rtos Mutex Error */
+ MBED_DEFINE_SYSTEM_ERROR(RTOS_SEMAPHORE_EVENT, 52), /* 308 Rtos Semaphore Error */
+ MBED_DEFINE_SYSTEM_ERROR(RTOS_MEMORY_POOL_EVENT, 53), /* 309 Rtos Memory Pool Error */
+ MBED_DEFINE_SYSTEM_ERROR(RTOS_TIMER_EVENT, 54), /* 310 Rtos Timer Error */
+ MBED_DEFINE_SYSTEM_ERROR(RTOS_EVENT_FLAGS_EVENT, 55), /* 311 Rtos Event flags Error */
+ MBED_DEFINE_SYSTEM_ERROR(RTOS_MESSAGE_QUEUE_EVENT, 56), /* 312 Rtos Message queue Error */
+ MBED_DEFINE_SYSTEM_ERROR(DEVICE_BUSY, 57), /* 313 Device Busy */
+ MBED_DEFINE_SYSTEM_ERROR(CONFIG_UNSUPPORTED, 58), /* 314 Configuration not supported */
+ MBED_DEFINE_SYSTEM_ERROR(CONFIG_MISMATCH, 59), /* 315 Configuration mismatch */
+ MBED_DEFINE_SYSTEM_ERROR(ALREADY_INITIALIZED, 60), /* 316 Already initialzied */
+ MBED_DEFINE_SYSTEM_ERROR(HARDFAULT_EXCEPTION, 61), /* 317 HardFault exception */
+ MBED_DEFINE_SYSTEM_ERROR(MEMMANAGE_EXCEPTION, 62), /* 318 MemManage exception */
+ MBED_DEFINE_SYSTEM_ERROR(BUSFAULT_EXCEPTION, 63), /* 319 BusFault exception */
+ MBED_DEFINE_SYSTEM_ERROR(USAGEFAULT_EXCEPTION, 64), /* 320 UsageFault exception*/
+
//Everytime you add a new system error code, you must update
//Error documentation under Handbook to capture the info on
//the new error status/codes
-
+
//MBED CUSTOM ERROR CODE definitions starts at offset MBED_CUSTOM_ERROR_BASE, see above.
/* Add More/Custom Error Codes here, See example below */
- //DEFINE_CUSTOM_ERROR( MY_CUSTOM_ERROR , 1 ),
-
+ //DEFINE_CUSTOM_ERROR( MY_CUSTOM_ERROR , 1 ),
+
} mbed_error_code_t;
/** mbed_error_ctx struct
@@ -812,10 +816,10 @@
uint32_t thread_stack_size;
uint32_t thread_stack_mem;
uint32_t thread_current_sp;
-#ifdef MBED_CONF_ERROR_FILENAME_CAPTURE_ENABLED
- char error_filename[MBED_CONF_MAX_ERROR_FILENAME_LEN];
+#ifdef MBED_CONF_PLATFORM_MAX_ERROR_FILENAME_LEN
+ char error_filename[MBED_CONF_PLATFORM_MAX_ERROR_FILENAME_LEN];
uint32_t error_line_number;
-#endif
+#endif
} mbed_error_ctx;
/** To generate a fatal compile-time error, you can use the pre-processor #error directive.
@@ -859,8 +863,8 @@
*
*
*/
-
-void error(const char* format, ...);
+
+void error(const char *format, ...);
/**
* Call this Macro to generate a mbed_error_status_t value for a System error
@@ -868,7 +872,7 @@
* @param error_code The mbed_error_code_t code to be used in generating the mbed_error_status_t. See mbed_error_code_t for error codes.
*
* @code
- *
+ *
* mbed_error_status_t driver_error = MBED_MAKE_SYSTEM_ERROR( MODULE_DRIVER_USB, MBED_ERROR_CODE_INITIALIZATION_FAILED )
*
* @endcode
@@ -883,7 +887,7 @@
* @param error_code The mbed_error_code_t code to be used in generating the mbed_error_status_t. See mbed_error_code_t for error codes.
*
* @code
- *
+ *
* mbed_error_status_t custom_error = MBED_MAKE_CUSTOM_ERROR( MBED_MODULE_APPLICATION, 0xDEAD//16-bit custom error code )
*
* @endcode
@@ -898,7 +902,7 @@
* @param error_code The mbed_error_code_t code to be used in generating the mbed_error_status_t. See mbed_error_code_t for error codes.
*
* @code
- *
+ *
* mbed_error_status_t new_error = MBED_MAKE_ERROR( MODULE_DRIVER_USB, MBED_ERROR_INITIALIZATION_FAILED )
*
* @endcode
@@ -927,10 +931,10 @@
* @param filename Name of the source file originating the error( Most callers can pass __FILE__ here ).
* @param line_number The line number of the source file originating the error( Most callers can pass __LINE__ here ) .
* @return 0 or MBED_SUCCESS.
- * MBED_ERROR_INVALID_ARGUMENT if called with invalid error status/codes
+ * MBED_ERROR_INVALID_ARGUMENT if called with invalid error status/codes
*
* @code
- *
+ *
* mbed_error( ERROR_OUT_OF_MEMORY, "Out of memory error", 0, __FILE__, __LINE__ )
*
* @endcode
@@ -962,17 +966,17 @@
/**
* Call this function to set a fatal system error and halt the system. This function will log the fatal error with the context info and prints the error report and halts the system.
- *
+ *
* @param error_status mbed_error_status_t status to be set(See mbed_error_status_t enum above for available error status values).
* @param error_msg The error message to be printed out to STDIO/Serial.
* @param error_value Value associated with the error status. This would depend on error code/error scenario.
* @param filename Name of the source file originating the error( Most callers can pass __FILE__ here ).
* @param line_number The line number of the source file originating the error( Most callers can pass __LINE__ here ) .
* @return 0 or MBED_SUCCESS.
- * MBED_ERROR_INVALID_ARGUMENT if called with invalid error status/codes
+ * MBED_ERROR_INVALID_ARGUMENT if called with invalid error status/codes
*
* @code
- *
+ *
* mbed_error( MBED_ERROR_PROHIBITED_OPERATION, "Prohibited operation tried", 0, __FILE__, __LINE__ )
*
* @endcode
@@ -982,7 +986,7 @@
mbed_error_status_t mbed_error(mbed_error_status_t error_status, const char *error_msg, unsigned int error_value, const char *filename, int line_number);
/**
- * Registers an application defined error callback with the error handling system.
+ * Registers an application defined error callback with the error handling system.
* This function will be called with error context info whenever system handles a mbed_error/mbed_warning call
* NOTE: This function should be implemented for re-entrancy as multiple threads may invoke mbed_error which may cause error hook to be called.
* @param custom_error_hook mbed_error_status_t status to be set(See mbed_error_status_t enum above for available error status values).
@@ -990,7 +994,7 @@
* MBED_ERROR_INVALID_ARGUMENT in case of NULL for custom_error_hook
*
* @code
- *
+ *
* mbed_error_status_t my_custom_error_hook(mbed_error_status_t error_status, const mbed_error_ctx *error_ctx) {
* //Do something with the error_status or error_ctx
* }
@@ -1047,7 +1051,7 @@
/**
* Reads the error context information for a specific error from error history, specified by the index.
- *
+ *
* @param index index of the error context entry in the history to be retrieved.\n
* The number of entries in the error history is configured during build and the max index depends on max depth of error history.\n
* index = 0 points to the oldest entry in the history, and index = (max history depth - 1) points to the latest entry in the error history.\n
@@ -1060,11 +1064,11 @@
/**
* Saves the error history information to a file
- *
+ *
* @param path path to the file in the filesystem
* @return 0 or MBED_ERROR_SUCCESS on success.
* MBED_ERROR_WRITE_FAILED if writing to file failed
- * MBED_ERROR_INVALID_ARGUMENT if path is not valid
+ * MBED_ERROR_INVALID_ARGUMENT if path is not valid
*
* @note Filesystem support is required in order for this function to work.
*
