mbed official
mbed library sources. Supersedes mbed-src.
Dependents: Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more
Diff: targets/TARGET_STM/TARGET_STM32F4/device/stm32f4xx_hal_tim_ex.c
- Revision:
- 182:a56a73fd2a6f
- Parent:
- 167:e84263d55307
--- a/targets/TARGET_STM/TARGET_STM32F4/device/stm32f4xx_hal_tim_ex.c Fri Feb 16 16:09:33 2018 +0000 +++ b/targets/TARGET_STM/TARGET_STM32F4/device/stm32f4xx_hal_tim_ex.c Tue Mar 20 16:56:18 2018 +0000 @@ -2,8 +2,6 @@ ****************************************************************************** * @file stm32f4xx_hal_tim_ex.c * @author MCD Application Team - * @version V1.7.1 - * @date 14-April-2017 * @brief TIM HAL module driver. * This file provides firmware functions to manage the following * functionalities of the Timer extension peripheral: @@ -151,9 +149,9 @@ */ /** * @brief Initializes the TIM Hall Sensor Interface and create the associated handle. - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. - * @param sConfig: TIM Hall Sensor configuration structure + * @param sConfig TIM Hall Sensor configuration structure * @retval HAL status */ HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef* sConfig) @@ -225,7 +223,7 @@ /** * @brief DeInitializes the TIM Hall Sensor interface - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. * @retval HAL status */ @@ -253,7 +251,7 @@ /** * @brief Initializes the TIM Hall Sensor MSP. - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. * @retval None */ @@ -268,7 +266,7 @@ /** * @brief DeInitializes TIM Hall Sensor MSP. - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. * @retval None */ @@ -283,7 +281,7 @@ /** * @brief Starts the TIM Hall Sensor Interface. - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. * @retval HAL status */ @@ -305,7 +303,7 @@ /** * @brief Stops the TIM Hall sensor Interface. - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. * @retval HAL status */ @@ -327,7 +325,7 @@ /** * @brief Starts the TIM Hall Sensor Interface in interrupt mode. - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. * @retval HAL status */ @@ -352,7 +350,7 @@ /** * @brief Stops the TIM Hall Sensor Interface in interrupt mode. - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. * @retval HAL status */ @@ -377,10 +375,10 @@ /** * @brief Starts the TIM Hall Sensor Interface in DMA mode. - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. - * @param pData: The destination Buffer address. - * @param Length: The length of data to be transferred from TIM peripheral to memory. + * @param pData The destination Buffer address. + * @param Length The length of data to be transferred from TIM peripheral to memory. * @retval HAL status */ HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length) @@ -427,7 +425,7 @@ /** * @brief Stops the TIM Hall Sensor Interface in DMA mode. - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. * @retval HAL status */ @@ -477,14 +475,13 @@ /** * @brief Starts the TIM Output Compare signal generation on the complementary * output. - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. - * @param Channel: TIM Channel to be enabled. + * @param Channel TIM Channel to be enabled. * This parameter can be one of the following values: * @arg TIM_CHANNEL_1: TIM Channel 1 selected * @arg TIM_CHANNEL_2: TIM Channel 2 selected * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected * @retval HAL status */ HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) @@ -508,14 +505,13 @@ /** * @brief Stops the TIM Output Compare signal generation on the complementary * output. - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. - * @param Channel: TIM Channel to be disabled. + * @param Channel TIM Channel to be disabled. * This parameter can be one of the following values: * @arg TIM_CHANNEL_1: TIM Channel 1 selected * @arg TIM_CHANNEL_2: TIM Channel 2 selected * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected * @retval HAL status */ HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) @@ -539,14 +535,13 @@ /** * @brief Starts the TIM Output Compare signal generation in interrupt mode * on the complementary output. - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. - * @param Channel: TIM Channel to be enabled. + * @param Channel TIM Channel to be enabled. * This parameter can be one of the following values: * @arg TIM_CHANNEL_1: TIM Channel 1 selected * @arg TIM_CHANNEL_2: TIM Channel 2 selected * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected * @retval HAL status */ HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) @@ -607,14 +602,13 @@ /** * @brief Stops the TIM Output Compare signal generation in interrupt mode * on the complementary output. - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. - * @param Channel: TIM Channel to be disabled. + * @param Channel TIM Channel to be disabled. * This parameter can be one of the following values: * @arg TIM_CHANNEL_1: TIM Channel 1 selected * @arg TIM_CHANNEL_2: TIM Channel 2 selected * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected * @retval HAL status */ HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel) @@ -678,16 +672,15 @@ /** * @brief Starts the TIM Output Compare signal generation in DMA mode * on the complementary output. - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. - * @param Channel: TIM Channel to be enabled. + * @param Channel TIM Channel to be enabled. * This parameter can be one of the following values: * @arg TIM_CHANNEL_1: TIM Channel 1 selected * @arg TIM_CHANNEL_2: TIM Channel 2 selected * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param pData: The source Buffer address. - * @param Length: The length of data to be transferred from memory to TIM peripheral + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral * @retval HAL status */ HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) @@ -796,14 +789,13 @@ /** * @brief Stops the TIM Output Compare signal generation in DMA mode * on the complementary output. - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. - * @param Channel: TIM Channel to be disabled. + * @param Channel TIM Channel to be disabled. * This parameter can be one of the following values: * @arg TIM_CHANNEL_1: TIM Channel 1 selected * @arg TIM_CHANNEL_2: TIM Channel 2 selected * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected * @retval HAL status */ HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) @@ -896,14 +888,13 @@ /** * @brief Starts the PWM signal generation on the complementary output. - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. - * @param Channel: TIM Channel to be enabled. + * @param Channel TIM Channel to be enabled. * This parameter can be one of the following values: * @arg TIM_CHANNEL_1: TIM Channel 1 selected * @arg TIM_CHANNEL_2: TIM Channel 2 selected * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected * @retval HAL status */ HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel) @@ -926,14 +917,13 @@ /** * @brief Stops the PWM signal generation on the complementary output. - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. - * @param Channel: TIM Channel to be disabled. + * @param Channel TIM Channel to be disabled. * This parameter can be one of the following values: * @arg TIM_CHANNEL_1: TIM Channel 1 selected * @arg TIM_CHANNEL_2: TIM Channel 2 selected * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected * @retval HAL status */ HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel) @@ -957,14 +947,13 @@ /** * @brief Starts the PWM signal generation in interrupt mode on the * complementary output. - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. - * @param Channel: TIM Channel to be disabled. + * @param Channel TIM Channel to be disabled. * This parameter can be one of the following values: * @arg TIM_CHANNEL_1: TIM Channel 1 selected * @arg TIM_CHANNEL_2: TIM Channel 2 selected * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected * @retval HAL status */ HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel) @@ -1025,14 +1014,13 @@ /** * @brief Stops the PWM signal generation in interrupt mode on the * complementary output. - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. - * @param Channel: TIM Channel to be disabled. + * @param Channel TIM Channel to be disabled. * This parameter can be one of the following values: * @arg TIM_CHANNEL_1: TIM Channel 1 selected * @arg TIM_CHANNEL_2: TIM Channel 2 selected * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected * @retval HAL status */ HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel) @@ -1096,16 +1084,15 @@ /** * @brief Starts the TIM PWM signal generation in DMA mode on the * complementary output - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. - * @param Channel: TIM Channel to be enabled. + * @param Channel TIM Channel to be enabled. * This parameter can be one of the following values: * @arg TIM_CHANNEL_1: TIM Channel 1 selected * @arg TIM_CHANNEL_2: TIM Channel 2 selected * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param pData: The source Buffer address. - * @param Length: The length of data to be transferred from memory to TIM peripheral + * @param pData The source Buffer address. + * @param Length The length of data to be transferred from memory to TIM peripheral * @retval HAL status */ HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length) @@ -1214,14 +1201,13 @@ /** * @brief Stops the TIM PWM signal generation in DMA mode on the complementary * output - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. - * @param Channel: TIM Channel to be disabled. + * @param Channel TIM Channel to be disabled. * This parameter can be one of the following values: * @arg TIM_CHANNEL_1: TIM Channel 1 selected * @arg TIM_CHANNEL_2: TIM Channel 2 selected * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected * @retval HAL status */ HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel) @@ -1304,9 +1290,9 @@ /** * @brief Starts the TIM One Pulse signal generation on the complementary * output. - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. - * @param OutputChannel: TIM Channel to be enabled. + * @param OutputChannel TIM Channel to be enabled. * This parameter can be one of the following values: * @arg TIM_CHANNEL_1: TIM Channel 1 selected * @arg TIM_CHANNEL_2: TIM Channel 2 selected @@ -1330,9 +1316,9 @@ /** * @brief Stops the TIM One Pulse signal generation on the complementary * output. - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. - * @param OutputChannel: TIM Channel to be disabled. + * @param OutputChannel TIM Channel to be disabled. * This parameter can be one of the following values: * @arg TIM_CHANNEL_1: TIM Channel 1 selected * @arg TIM_CHANNEL_2: TIM Channel 2 selected @@ -1360,9 +1346,9 @@ /** * @brief Starts the TIM One Pulse signal generation in interrupt mode on the * complementary channel. - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. - * @param OutputChannel: TIM Channel to be enabled. + * @param OutputChannel TIM Channel to be enabled. * This parameter can be one of the following values: * @arg TIM_CHANNEL_1: TIM Channel 1 selected * @arg TIM_CHANNEL_2: TIM Channel 2 selected @@ -1392,9 +1378,9 @@ /** * @brief Stops the TIM One Pulse signal generation in interrupt mode on the * complementary channel. - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. - * @param OutputChannel: TIM Channel to be disabled. + * @param OutputChannel TIM Channel to be disabled. * This parameter can be one of the following values: * @arg TIM_CHANNEL_1: TIM Channel 1 selected * @arg TIM_CHANNEL_2: TIM Channel 2 selected @@ -1454,16 +1440,16 @@ * configured in Hall sensor interface, this interface Timer will generate the * commutation at its TRGO output (connected to Timer used in this function) each time * the TI1 of the Interface Timer detect a commutation at its input TI1. - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. - * @param InputTrigger: the Internal trigger corresponding to the Timer Interfacing with the Hall sensor. + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor. * This parameter can be one of the following values: * @arg TIM_TS_ITR0: Internal trigger 0 selected * @arg TIM_TS_ITR1: Internal trigger 1 selected * @arg TIM_TS_ITR2: Internal trigger 2 selected * @arg TIM_TS_ITR3: Internal trigger 3 selected * @arg TIM_TS_NONE: No trigger is needed - * @param CommutationSource: the Commutation Event source. + * @param CommutationSource the Commutation Event source. * This parameter can be one of the following values: * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit @@ -1504,16 +1490,16 @@ * configured in Hall sensor interface, this interface Timer will generate the * commutation at its TRGO output (connected to Timer used in this function) each time * the TI1 of the Interface Timer detect a commutation at its input TI1. - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. - * @param InputTrigger: the Internal trigger corresponding to the Timer Interfacing with the Hall sensor. + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor. * This parameter can be one of the following values: * @arg TIM_TS_ITR0: Internal trigger 0 selected * @arg TIM_TS_ITR1: Internal trigger 1 selected * @arg TIM_TS_ITR2: Internal trigger 2 selected * @arg TIM_TS_ITR3: Internal trigger 3 selected * @arg TIM_TS_NONE: No trigger is needed - * @param CommutationSource: the Commutation Event source. + * @param CommutationSource the Commutation Event source. * This parameter can be one of the following values: * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit @@ -1558,16 +1544,16 @@ * commutation at its TRGO output (connected to Timer used in this function) each time * the TI1 of the Interface Timer detect a commutation at its input TI1. * @note: The user should configure the DMA in his own software, in This function only the COMDE bit is set - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. - * @param InputTrigger: the Internal trigger corresponding to the Timer Interfacing with the Hall sensor. + * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor. * This parameter can be one of the following values: * @arg TIM_TS_ITR0: Internal trigger 0 selected * @arg TIM_TS_ITR1: Internal trigger 1 selected * @arg TIM_TS_ITR2: Internal trigger 2 selected * @arg TIM_TS_ITR3: Internal trigger 3 selected * @arg TIM_TS_NONE: No trigger is needed - * @param CommutationSource: the Commutation Event source. + * @param CommutationSource the Commutation Event source. * This parameter can be one of the following values: * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit @@ -1611,9 +1597,9 @@ /** * @brief Configures the TIM in master mode. - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. - * @param sMasterConfig: pointer to a TIM_MasterConfigTypeDef structure that + * @param sMasterConfig pointer to a TIM_MasterConfigTypeDef structure that * contains the selected trigger output (TRGO) and the Master/Slave * mode. * @retval HAL status @@ -1649,9 +1635,9 @@ /** * @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State * and the AOE(automatic output enable). - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. - * @param sBreakDeadTimeConfig: pointer to a TIM_ConfigBreakDeadConfig_TypeDef structure that + * @param sBreakDeadTimeConfig pointer to a TIM_ConfigBreakDeadConfig_TypeDef structure that * contains the BDTR Register configuration information for the TIM peripheral. * @retval HAL status */ @@ -1696,9 +1682,9 @@ /** * @brief Configures the TIM2, TIM5 and TIM11 Remapping input capabilities. - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. - * @param Remap: specifies the TIM input remapping source. + * @param Remap specifies the TIM input remapping source. * This parameter can be one of the following values: * @arg TIM_TIM2_TIM8_TRGO: TIM2 ITR1 input is connected to TIM8 Trigger output(default) * @arg TIM_TIM2_ETH_PTP: TIM2 ITR1 input is connected to ETH PTP trigger output. @@ -1773,7 +1759,7 @@ /** * @brief Hall commutation changed callback in non blocking mode - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. * @retval None */ @@ -1788,7 +1774,7 @@ /** * @brief Hall Break detection callback in non blocking mode - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. * @retval None */ @@ -1821,7 +1807,7 @@ /** * @brief Return the TIM Hall Sensor interface state - * @param htim: pointer to a TIM_HandleTypeDef structure that contains + * @param htim pointer to a TIM_HandleTypeDef structure that contains * the configuration information for TIM module. * @retval HAL state */ @@ -1836,7 +1822,7 @@ /** * @brief TIM DMA Commutation callback. - * @param hdma: pointer to a DMA_HandleTypeDef structure that contains + * @param hdma pointer to a DMA_HandleTypeDef structure that contains * the configuration information for the specified DMA module. * @retval None */ @@ -1855,12 +1841,12 @@ /** * @brief Enables or disables the TIM Capture Compare Channel xN. * @param TIMx to select the TIM peripheral - * @param Channel: specifies the TIM Channel + * @param Channel specifies the TIM Channel * This parameter can be one of the following values: * @arg TIM_Channel_1: TIM Channel 1 * @arg TIM_Channel_2: TIM Channel 2 * @arg TIM_Channel_3: TIM Channel 3 - * @param ChannelNState: specifies the TIM Channel CCxNE bit new state. + * @param ChannelNState specifies the TIM Channel CCxNE bit new state. * This parameter can be: TIM_CCxN_ENABLE or TIM_CCxN_Disable. * @retval None */
