mbed official
mbed library sources. Supersedes mbed-src.
Dependents: Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more
Diff: targets/TARGET_STM/TARGET_STM32F0/device/stm32f0xx_hal_uart_ex.h
- Revision:
- 156:95d6b41a828b
- Parent:
- 149:156823d33999
- Child:
- 180:96ed750bd169
--- a/targets/TARGET_STM/TARGET_STM32F0/device/stm32f0xx_hal_uart_ex.h Thu Jan 05 10:51:54 2017 +0000
+++ b/targets/TARGET_STM/TARGET_STM32F0/device/stm32f0xx_hal_uart_ex.h Mon Jan 16 15:03:32 2017 +0000
@@ -2,9 +2,9 @@
******************************************************************************
* @file stm32f0xx_hal_uart_ex.h
* @author MCD Application Team
- * @version V1.4.0
- * @date 27-May-2016
- * @brief Header file of UART HAL Extension module.
+ * @version V1.5.0
+ * @date 04-November-2016
+ * @brief Header file of UART HAL Extended module.
******************************************************************************
* @attention
*
@@ -71,9 +71,9 @@
be filled up. */
uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long.
- This parameter can be a value of @ref UART_WakeUp_Address_Length */
+ This parameter can be a value of @ref UART_WakeUp_Address_Length. */
- uint8_t Address; /*!< UART/USART node address (7-bit long max) */
+ uint8_t Address; /*!< UART/USART node address (7-bit long max). */
} UART_WakeUpTypeDef;
/**
@@ -92,12 +92,12 @@
#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
-#define UART_WORDLENGTH_7B ((uint32_t)USART_CR1_M1)
-#define UART_WORDLENGTH_8B ((uint32_t)0x00000000)
-#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M0)
+#define UART_WORDLENGTH_7B ((uint32_t)USART_CR1_M1) /*!< 7-bit long UART frame */
+#define UART_WORDLENGTH_8B (0x00000000U) /*!< 8-bit long UART frame */
+#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M0) /*!< 9-bit long UART frame */
#else
-#define UART_WORDLENGTH_8B ((uint32_t)0x00000000)
-#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+#define UART_WORDLENGTH_8B (0x00000000U) /*!< 8-bit long UART frame */
+#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M) /*!< 9-bit long UART frame */
#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
@@ -111,38 +111,38 @@
#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
-#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x00000000) /*!< Auto Baud rate detection on start bit */
+#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT (0x00000000U) /*!< Auto Baud rate detection on start bit */
#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0) /*!< Auto Baud rate detection on falling edge */
#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME ((uint32_t)USART_CR2_ABRMODE_1) /*!< Auto Baud rate detection on 0x7F frame detection */
#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME ((uint32_t)USART_CR2_ABRMODE) /*!< Auto Baud rate detection on 0x55 frame detection */
#else
-#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x00000000) /*!< Auto Baud rate detection on start bit */
+#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT (0x00000000U) /*!< Auto Baud rate detection on start bit */
#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0) /*!< Auto Baud rate detection on falling edge */
#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
/**
* @}
- */
+ */
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
/** @defgroup UARTEx_LIN UARTEx Local Interconnection Network mode
* @{
*/
-#define UART_LIN_DISABLE ((uint32_t)0x00000000) /*!< Local Interconnect Network disable */
+#define UART_LIN_DISABLE (0x00000000U) /*!< Local Interconnect Network disable */
#define UART_LIN_ENABLE ((uint32_t)USART_CR2_LINEN) /*!< Local Interconnect Network enable */
/**
* @}
- */
-
+ */
+
/** @defgroup UARTEx_LIN_Break_Detection UARTEx LIN Break Detection
* @{
*/
-#define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000) /*!< LIN 10-bit break detection length */
+#define UART_LINBREAKDETECTLENGTH_10B (0x00000000U) /*!< LIN 10-bit break detection length */
#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)USART_CR2_LBDL) /*!< LIN 11-bit break detection length */
/**
* @}
- */
+ */
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
/** @defgroup UART_Flags UARTEx Status Flags
@@ -151,61 +151,61 @@
* @{
*/
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
-#define UART_FLAG_REACK ((uint32_t)0x00400000)
+#define UART_FLAG_REACK (0x00400000U) /*!< UART receive enable acknowledge flag */
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
-#define UART_FLAG_TEACK ((uint32_t)0x00200000)
+#define UART_FLAG_TEACK (0x00200000U) /*!< UART transmit enable acknowledge flag */
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
-#define UART_FLAG_WUF ((uint32_t)0x00100000)
+#define UART_FLAG_WUF (0x00100000U) /*!< UART wake-up from stop mode flag */
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
-#define UART_FLAG_RWU ((uint32_t)0x00080000)
-#define UART_FLAG_SBKF ((uint32_t)0x00040000)
-#define UART_FLAG_CMF ((uint32_t)0x00020000)
-#define UART_FLAG_BUSY ((uint32_t)0x00010000)
-#define UART_FLAG_ABRF ((uint32_t)0x00008000)
-#define UART_FLAG_ABRE ((uint32_t)0x00004000)
+#define UART_FLAG_RWU (0x00080000U) /*!< UART receiver wake-up from mute mode flag */
+#define UART_FLAG_SBKF (0x00040000U) /*!< UART send break flag */
+#define UART_FLAG_CMF (0x00020000U) /*!< UART character match flag */
+#define UART_FLAG_BUSY (0x00010000U) /*!< UART busy flag */
+#define UART_FLAG_ABRF (0x00008000U) /*!< UART auto Baud rate flag */
+#define UART_FLAG_ABRE (0x00004000U) /*!< UART auto Baud rate error */
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
-#define UART_FLAG_EOBF ((uint32_t)0x00001000)
+#define UART_FLAG_EOBF (0x00001000U) /*!< UART end of block flag */
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
-#define UART_FLAG_RTOF ((uint32_t)0x00000800)
-#define UART_FLAG_CTS ((uint32_t)0x00000400)
-#define UART_FLAG_CTSIF ((uint32_t)0x00000200)
+#define UART_FLAG_RTOF (0x00000800U) /*!< UART receiver timeout flag */
+#define UART_FLAG_CTS (0x00000400U) /*!< UART clear to send flag */
+#define UART_FLAG_CTSIF (0x00000200U) /*!< UART clear to send interrupt flag */
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
-#define UART_FLAG_LBDF ((uint32_t)0x00000100)
+#define UART_FLAG_LBDF (0x00000100U) /*!< UART LIN break detection flag (not available on F030xx devices)*/
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
-#define UART_FLAG_TXE ((uint32_t)0x00000080)
-#define UART_FLAG_TC ((uint32_t)0x00000040)
-#define UART_FLAG_RXNE ((uint32_t)0x00000020)
-#define UART_FLAG_IDLE ((uint32_t)0x00000010)
-#define UART_FLAG_ORE ((uint32_t)0x00000008)
-#define UART_FLAG_NE ((uint32_t)0x00000004)
-#define UART_FLAG_FE ((uint32_t)0x00000002)
-#define UART_FLAG_PE ((uint32_t)0x00000001)
+#define UART_FLAG_TXE (0x00000080U) /*!< UART transmit data register empty */
+#define UART_FLAG_TC (0x00000040U) /*!< UART transmission complete */
+#define UART_FLAG_RXNE (0x00000020U) /*!< UART read data register not empty */
+#define UART_FLAG_IDLE (0x00000010U) /*!< UART idle flag */
+#define UART_FLAG_ORE (0x00000008U) /*!< UART overrun error */
+#define UART_FLAG_NE (0x00000004U) /*!< UART noise error */
+#define UART_FLAG_FE (0x00000002U) /*!< UART frame error */
+#define UART_FLAG_PE (0x00000001U) /*!< UART parity error */
/**
* @}
*/
/** @defgroup UART_Interrupt_definition UARTEx Interrupts Definition
- * Elements values convention: 0000ZZZZZ0XXYYYYYb
+ * Elements values convention: 000ZZZZZ0XXYYYYYb
* - YYYYY : Interrupt source position in the XX register (5bits)
* - XX : Interrupt source register (2bits)
* - 01: CR1 register
* - 10: CR2 register
* - 11: CR3 register
* - ZZZZZ : Flag position in the ISR register(5bits)
- * @{
- */
-#define UART_IT_PE ((uint16_t)0x0028)
-#define UART_IT_TXE ((uint16_t)0x0727)
-#define UART_IT_TC ((uint16_t)0x0626)
-#define UART_IT_RXNE ((uint16_t)0x0525)
-#define UART_IT_IDLE ((uint16_t)0x0424)
+ * @{
+ */
+#define UART_IT_PE (0x0028U) /*!< UART parity error interruption */
+#define UART_IT_TXE (0x0727U) /*!< UART transmit data register empty interruption */
+#define UART_IT_TC (0x0626U) /*!< UART transmission complete interruption */
+#define UART_IT_RXNE (0x0525U) /*!< UART read data register not empty interruption */
+#define UART_IT_IDLE (0x0424U) /*!< UART idle interruption */
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
-#define UART_IT_LBD ((uint16_t)0x0846)
+#define UART_IT_LBD (0x0846U) /*!< UART LIN break detection interruption */
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
-#define UART_IT_CTS ((uint16_t)0x096A)
-#define UART_IT_CM ((uint16_t)0x112E)
+#define UART_IT_CTS (0x096AU) /*!< UART CTS interruption */
+#define UART_IT_CM (0x112EU) /*!< UART character match interruption */
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
-#define UART_IT_WUF ((uint16_t)0x1476)
+#define UART_IT_WUF (0x1476U) /*!< UART wake-up from stop mode interruption */
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
/**
* @}
@@ -215,37 +215,37 @@
/** @defgroup UART_IT_CLEAR_Flags UARTEx Interruption Clear Flags
* @{
*/
-#define UART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */
-#define UART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */
-#define UART_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */
-#define UART_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
-#define UART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */
-#define UART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
+#define UART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */
+#define UART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */
+#define UART_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */
+#define UART_CLEAR_OREF USART_ICR_ORECF /*!< Overrun Error Clear Flag */
+#define UART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */
+#define UART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_CLEAR_LBDF USART_ICR_LBDCF /*!< LIN Break Detection Clear Flag (not available on F030xx devices)*/
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
-#define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */
-#define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< Receiver Time Out Clear Flag */
+#define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */
+#define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< Receiver Time Out Clear Flag */
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
-#define UART_CLEAR_EOBF USART_ICR_EOBCF /*!< End Of Block Clear Flag */
+#define UART_CLEAR_EOBF USART_ICR_EOBCF /*!< End Of Block Clear Flag */
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
-#define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */
+#define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_CLEAR_WUF USART_ICR_WUCF /*!< Wake Up from stop mode Clear Flag */
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
/**
* @}
- */
+ */
/** @defgroup UART_Request_Parameters UARTEx Request Parameters
* @{
*/
-#define UART_AUTOBAUD_REQUEST ((uint32_t)USART_RQR_ABRRQ) /*!< Auto-Baud Rate Request */
-#define UART_SENDBREAK_REQUEST ((uint32_t)USART_RQR_SBKRQ) /*!< Send Break Request */
-#define UART_MUTE_MODE_REQUEST ((uint32_t)USART_RQR_MMRQ) /*!< Mute Mode Request */
-#define UART_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
+#define UART_AUTOBAUD_REQUEST ((uint32_t)USART_RQR_ABRRQ) /*!< Auto-Baud Rate Request */
+#define UART_SENDBREAK_REQUEST ((uint32_t)USART_RQR_SBKRQ) /*!< Send Break Request */
+#define UART_MUTE_MODE_REQUEST ((uint32_t)USART_RQR_MMRQ) /*!< Mute Mode Request */
+#define UART_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
-#define UART_TXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */
+#define UART_TXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */
#else
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
/**
@@ -256,16 +256,16 @@
/** @defgroup UART_Stop_Mode_Enable UARTEx Advanced Feature Stop Mode Enable
* @{
*/
-#define UART_ADVFEATURE_STOPMODE_DISABLE ((uint32_t)0x00000000) /*!< UART stop mode disable */
+#define UART_ADVFEATURE_STOPMODE_DISABLE (0x00000000U) /*!< UART stop mode disable */
#define UART_ADVFEATURE_STOPMODE_ENABLE ((uint32_t)USART_CR1_UESM) /*!< UART stop mode enable */
/**
* @}
- */
+ */
/** @defgroup UART_WakeUp_from_Stop_Selection UART WakeUp From Stop Selection
* @{
*/
-#define UART_WAKEUP_ON_ADDRESS ((uint32_t)0x00000000) /*!< UART wake-up on address */
+#define UART_WAKEUP_ON_ADDRESS (0x00000000U) /*!< UART wake-up on address */
#define UART_WAKEUP_ON_STARTBIT ((uint32_t)USART_CR3_WUS_1) /*!< UART wake-up on start bit */
#define UART_WAKEUP_ON_READDATA_NONEMPTY ((uint32_t)USART_CR3_WUS) /*!< UART wake-up on receive data register not empty */
/**
@@ -284,7 +284,7 @@
/** @brief Flush the UART Data registers.
* @param __HANDLE__: specifies the UART Handle.
- * @retval None
+ * @retval None
*/
#if !defined(STM32F030x6) && !defined(STM32F030x8)
#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) \
@@ -313,8 +313,6 @@
* @param __CLOCKSOURCE__: output variable.
* @retval UART clocking source, written in __CLOCKSOURCE__.
*/
-
-
#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx)
#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
do { \
@@ -633,33 +631,33 @@
{ \
if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
{ \
- (__HANDLE__)->Mask = 0x01FF ; \
+ (__HANDLE__)->Mask = 0x01FFU; \
} \
else \
{ \
- (__HANDLE__)->Mask = 0x00FF ; \
+ (__HANDLE__)->Mask = 0x00FFU; \
} \
} \
else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \
{ \
if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
{ \
- (__HANDLE__)->Mask = 0x00FF ; \
+ (__HANDLE__)->Mask = 0x00FFU; \
} \
else \
{ \
- (__HANDLE__)->Mask = 0x007F ; \
+ (__HANDLE__)->Mask = 0x007FU; \
} \
} \
else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \
{ \
if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
{ \
- (__HANDLE__)->Mask = 0x007F ; \
+ (__HANDLE__)->Mask = 0x007FU; \
} \
else \
{ \
- (__HANDLE__)->Mask = 0x003F ; \
+ (__HANDLE__)->Mask = 0x003FU; \
} \
} \
} while(0)
@@ -670,22 +668,22 @@
{ \
if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
{ \
- (__HANDLE__)->Mask = 0x01FF ; \
+ (__HANDLE__)->Mask = 0x01FFU; \
} \
else \
{ \
- (__HANDLE__)->Mask = 0x00FF ; \
+ (__HANDLE__)->Mask = 0x00FFU; \
} \
} \
else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \
{ \
if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
{ \
- (__HANDLE__)->Mask = 0x00FF ; \
+ (__HANDLE__)->Mask = 0x00FFU; \
} \
else \
{ \
- (__HANDLE__)->Mask = 0x007F ; \
+ (__HANDLE__)->Mask = 0x007FU; \
} \
} \
} while(0)
@@ -775,7 +773,7 @@
*/
#define IS_UART_ADVFEATURE_STOPMODE(__STOPMODE__) (((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_DISABLE) || \
((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_ENABLE))
-
+
/**
* @brief Ensure that UART wake-up selection is valid.
* @param __WAKE__: UART wake-up selection.
