Diff: targets/TARGET_TOSHIBA/TARGET_TMPM066/PinNames.h

Revision:

172:7d866c31b3c5

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_TOSHIBA/TARGET_TMPM066/PinNames.h	Thu Aug 31 17:27:04 2017 +0100
@@ -0,0 +1,115 @@
+/* mbed Microcontroller Library
+ * (C)Copyright TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION 2017 All rights reserved
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define PIN_PORT(X)         (((uint32_t)(X) >> 3) & 0xF)
+#define PIN_POS(X)          ((uint32_t)(X) & 0x7)
+
+// Pin data, bit 31..16: Pin Function, bit 15..0: Pin Direction
+#define PIN_DATA(FUNC, DIR) (int)(((FUNC) << 16) | ((DIR) << 0))
+#define PIN_FUNC(X)         (((X) & 0xffff0000) >> 16)
+#define PIN_DIR(X)          ((X) & 0xffff)
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT,
+    PIN_INOUT
+} PinDirection;
+
+typedef enum {
+    // TMPM066 Pin Names
+    PA0 = 0 << 3, PA1, PA2, PA3, PA4, PA5, PA6, PA7,
+    PB0 = 1 << 3, PB1, PB2, PB3,
+    PC0 = 2 << 3, PC1, PC2, PC3, PC4, PC5,
+    PD0 = 3 << 3, PD1, PD2, PD3, PD4, PD5,
+    PE0 = 4 << 3, PE1, PE2, PE3, PE4, PE5,
+    PF0 = 5 << 3, PF1, PF2, PF3, PF4, PF5, PF6, PF7,
+    PG0 = 6 << 3, PG1,
+    PH0 = 7 << 3, PH1, PH2, PH3,
+    PJ0 = 8 << 3, PJ1, PJ2, PJ3,
+
+    // Other mbed Pin Names
+    LED1 = PB0,
+    LED2 = PB1,
+    LED3 = LED1,
+    LED4 = LED2,
+
+    // External data bus Pin Names
+    D0 = PE1,
+    D1 = PE2,
+    D2 = PE0,
+    D3 = PD1,
+    D4 = PJ1,
+    D5 = PD2,
+    D6 = PD3,
+    D7 = PJ2,
+    D8 = PJ3,
+    D9 = PF4,
+    D10 = PF0,
+    D11 = PF1,
+    D12 = PF2,
+    D13 = PF3,
+    D14 = PC1,
+    D15 = PC0,
+
+    // Analogue out pins
+    A0 = PA2,
+    A1 = PA3,
+    A2 = PA4,
+    A3 = PA5,
+    A4 = PA6,
+    A5 = PA7,
+
+    // DAP_UART
+    USBTX = PC2,
+    USBRX = PC3,
+    MBEDIF_TXD = USBTX,
+    MBEDIF_RXD = USBRX,
+
+    // Switches
+    SW1 = PB2,
+    SW2 = PB3,
+
+    // I2C pins
+    SDA = PC1,
+    SCL = PC0,
+    I2C_SDA = SDA,
+    I2C_SCL = SCL,
+
+    // Not connected
+    NC = (int)0xFFFFFFFF,
+} PinName;
+
+typedef enum {
+    PullUp = 0,
+    PullDown,
+    PullNone,
+    OpenDrain,
+    PullDefault = PullDown
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif