Diff: targets/TARGET_TOSHIBA/TARGET_TMPM46B/PinNames.h

Revision:

184:08ed48f1de7f

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_TOSHIBA/TARGET_TMPM46B/PinNames.h	Thu Apr 19 17:12:19 2018 +0100
@@ -0,0 +1,122 @@
+/* mbed Microcontroller Library
+ * (C)Copyright TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION 2017 All rights reserved
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define PIN_PORT(X)         (((uint32_t)(X) >> 3) & 0xF)
+#define PIN_POS(X)          ((uint32_t)(X) & 0x7)
+
+// Pin data, bit 31..16: Pin Function, bit 15..0: Pin Direction
+#define PIN_DATA(FUNC, DIR) (int)(((FUNC) << 16) | ((DIR) << 0))
+#define PIN_FUNC(X)         (((X) & 0xffff0000) >> 16)
+#define PIN_DIR(X)          ((X) & 0xffff)
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT,
+    PIN_INOUT
+} PinDirection;
+
+typedef enum {
+    // TMPM46B Pin Names
+    PA0 = 0  << 3, PA1, PA2, PA3, PA4, PA5, PA6, PA7,
+    PB0 = 1  << 3, PB1, PB2, PB3, PB4, PB5, PB6, PB7,
+    PC0 = 2  << 3, PC1, PC2, PC3, PC4, PC5,
+    PD0 = 3  << 3, PD1, PD2, PD3, PD4,
+    PE0 = 4  << 3, PE1, PE2, PE3, PE4, PE5, PE6, PE7,
+    PF0 = 5  << 3, PF1, PF2, PF3, PF4, PF5, PF6, PF7,
+    PG0 = 6  << 3, PG1, PG2, PG3, PG4, PG5, PG6, PG7,
+    PH0 = 7  << 3, PH1, PH2, PH3,
+    PJ0 = 8  << 3, PJ1, PJ2, PJ3, PJ4, PJ5, PJ6, PJ7,
+    PK0 = 9  << 3, PK1, PK2, PK3, PK4,
+    PL0 = 10 << 3, PL1, PL2, PL3,
+
+    // Other mbed Pin Names
+    LED1 = PF4,
+    LED2 = PF5,
+    LED3 = PF6,
+    LED4 = PF7,
+
+    // External data bus Pin Names
+    D0 = PL1,
+    D1 = PL2,
+    D2 = PC0,
+    D3 = PE3,
+    D4 = PC1,
+    D5 = PE4,
+    D6 = PH1,
+    D7 = PC2,
+    D8 = PC3,
+    D9 = PH0,
+    D10 = PD0,
+    D11 = PD2,
+    D12 = PD1,
+    D13 = PD3,
+    D14 = PK2,
+    D15 = PK3,
+
+    // Analogue out pins
+    A0 = PJ2,
+    A1 = PJ3,
+    A2 = PJ4,
+    A3 = PJ5,
+    A4 = PJ6,
+    A5 = PJ7,
+
+    // DAP_UART
+    USBTX = PE5,
+    USBRX = PE6,
+    MBEDIF_TXD = USBTX,
+    MBEDIF_RXD = USBRX,
+
+    MBED_CONF_APP_UART0_TX = PE2,
+    MBED_CONF_APP_UART0_RX = PE1,
+
+    // Switches
+    SW1 = PF0,
+    SW2 = PF1,
+    SW3 = PF2,
+    SW4 = PF3,
+
+    // I2C pins
+    SDA = PK2,
+    SCL = PK3,
+    I2C_SDA = SDA,
+    I2C_SCL = SCL,
+
+    // Not connected
+    NC = (int)0xFFFFFFFF,
+} PinName;
+
+typedef enum {
+    PullUp = 0,
+    PullDown,
+    PullNone,
+    OpenDrain,
+    PullDefault = PullDown
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif