Diff: targets/TARGET_TOSHIBA/TARGET_TMPM3H6/PinNames.h

Revision:

187:0387e8f68319

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_TOSHIBA/TARGET_TMPM3H6/PinNames.h	Thu Sep 06 13:40:20 2018 +0100
@@ -0,0 +1,121 @@
+/* mbed Microcontroller Library
+ * (C)Copyright TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION 2018 All rights reserved
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    PIN_INPUT,
+    PIN_OUTPUT,
+    PIN_INOUT
+} PinDirection;
+
+typedef enum {
+    // TMPM3H6 Pin Names
+    PA0 = 0  << 3, PA1, PA2, PA3, PA4, PA5, PA6, PA7,
+    PB0 = 1  << 3, PB1, PB2, PB3, PB4, PB5, PB6, PB7,
+    PC0 = 2  << 3, PC1, PC2, PC3, PC4, PC5, PC6,
+    PD0 = 3  << 3, PD1, PD2, PD3,
+    PE0 = 4  << 3, PE1, PE2, PE3, PE4, PE5, PE6,
+    PF0 = 5  << 3, PF1, PF2, PF3, PF4,
+    PG0 = 6  << 3, PG1,
+    PH0 = 7  << 3, PH1, PH2, PH3,
+    PJ0 = 8  << 3, PJ1, PJ2, PJ3, PJ4, PJ5,
+    PK0 = 9  << 3, PK1, PK2, PK3, PK4, PK5, PK6, PK7,
+    PL0 = 10 << 3, PL1, PL2, PL3, PL4, PL5, PL6,
+    PM0 = 11 << 3, PM1, PM2, PM3, PM4, PM5, PM6,
+    PN0 = 12 << 3, PN1, PN2, PN3, PN4,PN5,
+    PP0 = 13 << 3, PP1, PP2, PP3,
+    PR0 = 14 << 3, PR1, PR2, PR3,
+
+    // Other mbed Pin Names
+    LED1 = PB4,
+    LED2 = PB5,
+    LED3 = PB6,
+    LED4 = PB7,
+
+    // external data bus Pin Names
+    D0  = PL0,
+    D1  = PL1,
+    D2  = PJ4,
+    D3  = PJ3,
+    D4  = PC4,
+    D5  = PC3,
+    D6  = PB3,
+    D7  = PB2,
+    D8  = PK1,
+    D9  = PJ0,
+    D10 = PL6,
+    D11 = PP1,
+    D12 = PP2,
+    D13 = PP0,
+    D14 = PA5,
+    D15 = PA4,
+
+    A0 = PE0,
+    A1 = PE1,
+    A2 = PE2,
+    A3 = PE3,
+    A4 = PE4,
+    A5 = PE5,
+
+    DAC0 = PG0,
+    DAC1 = PG1,
+
+    USBTX = PJ2,
+    USBRX = PJ1,
+
+    SW1 = PN4,
+    SW2 = PN3,
+    SW3 = PN2,
+    SW4 = PN1,
+
+    // I2C
+    EEPROM_SDA = PC1,
+    EEPROM_SCL = PC0,
+
+    // TSPI
+    MOSI = PP1,
+    MISO = PP2,
+    SCLK = PP0,
+
+    // Not connected
+    NC = (int)0xFFFFFFFF,
+} PinName;
+
+typedef enum {
+    PullUp = 0,
+    PullDown,
+    PullNone,
+    OpenDrain,
+    PullDefault
+} PinMode;
+
+typedef enum {
+    DISABLE = 0,
+    ENABLE
+} FunctionalState;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif