mbed client on ethernet with LWIP
Dependencies: mbed Socket lwip-eth lwip-sys lwip
Fork of mbed-client-classic-example-lwip by
Diff: nanostack-libservice/mbed-client-libservice/ns_trace.h
- Revision:
- 11:cada08fc8a70
diff -r 1280c4c21987 -r cada08fc8a70 nanostack-libservice/mbed-client-libservice/ns_trace.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/nanostack-libservice/mbed-client-libservice/ns_trace.h Thu Jun 09 17:08:36 2016 +0000 @@ -0,0 +1,320 @@ +/* + * Copyright (c) 2015 ARM Limited. All rights reserved. + * SPDX-License-Identifier: Apache-2.0 + * Licensed under the Apache License, Version 2.0 (the License); you may + * not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an AS IS BASIS, WITHOUT + * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +/** + * \file ns_trace.h + * Trace interface for NanoStack library as well as application. + * This file provide simple but flexible way to handle software traces. + * Trace library are abstract layer, which use stdout (printf) by default, + * but outputs can be easily redirect to custom function, for example to + * store traces to memory or other interfaces. + * + * usage example: + * \code(main.c:) + * #include "ns_trace.h" + * #define TRACE_GROUP "main" + * + * int main(void){ + * trace_init(); // initialize trace library + * tr_debug("this is debug msg"); //print debug message to stdout: "[DBG] + * tr_err("this is error msg"); + * tr_warn("this is warning msg"); + * tr_info("this is info msg"); + * return 0; + * } + * \endcode + * + */ +#ifndef NS_TRACE_H_ +#define NS_TRACE_H_ +#include "ns_types.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** 3 upper bits are trace modes related, + and 5 lower bits are trace level configuration */ + +/** Config mask */ +#define TRACE_MASK_CONFIG 0xE0 +/** Trace level mask */ +#define TRACE_MASK_LEVEL 0x1F + +/** plain trace data instead of "headers" */ +#define TRACE_MODE_PLAIN 0x80 +/** color mode */ +#define TRACE_MODE_COLOR 0x40 +/** Use print CR before trace line */ +#define TRACE_CARRIAGE_RETURN 0x20 + +/** used to activate all trace levels */ +#define TRACE_ACTIVE_LEVEL_ALL 0x1F +/** print all traces same as above */ +#define TRACE_ACTIVE_LEVEL_DEBUG 0x1f +/** print info,warn and error traces */ +#define TRACE_ACTIVE_LEVEL_INFO 0x0f +/** print warn and error traces */ +#define TRACE_ACTIVE_LEVEL_WARN 0x07 +/** print only error trace */ +#define TRACE_ACTIVE_LEVEL_ERROR 0x03 +/** print only cmd line data */ +#define TRACE_ACTIVE_LEVEL_CMD 0x01 +/** trace nothing */ +#define TRACE_ACTIVE_LEVEL_NONE 0x00 + +/** this print is some deep information for debug purpose */ +#define TRACE_LEVEL_DEBUG 0x10 +/** Info print, for general purpose prints */ +#define TRACE_LEVEL_INFO 0x08 +/** warning prints, which shouldn't causes any huge problems */ +#define TRACE_LEVEL_WARN 0x04 +/** Error prints, which causes probably problems, e.g. out of mem. */ +#define TRACE_LEVEL_ERROR 0x02 +/** special level for cmdline. Behaviours like "plain mode" */ +#define TRACE_LEVEL_CMD 0x01 + +//usage macros: +#define tr_info(...) tracef(TRACE_LEVEL_INFO, TRACE_GROUP, __VA_ARGS__) //!< Print info message +#define tr_debug(...) tracef(TRACE_LEVEL_DEBUG, TRACE_GROUP, __VA_ARGS__) //!< Print debug message +#define tr_warning(...) tracef(TRACE_LEVEL_WARN, TRACE_GROUP, __VA_ARGS__) //!< Print warning message +#define tr_warn(...) tracef(TRACE_LEVEL_WARN, TRACE_GROUP, __VA_ARGS__) //!< Alternative warning message +#define tr_error(...) tracef(TRACE_LEVEL_ERROR, TRACE_GROUP, __VA_ARGS__) //!< Print Error Message +#define tr_err(...) tracef(TRACE_LEVEL_ERROR, TRACE_GROUP, __VA_ARGS__) //!< Alternative error message +#define tr_cmdline(...) tracef(TRACE_LEVEL_CMD, TRACE_GROUP, __VA_ARGS__) //!< Special print for cmdline. See more from TRACE_LEVEL_CMD -level + +/** Possible to skip all traces in compile time */ +#if defined(FEA_TRACE_SUPPORT) || defined(HAVE_DEBUG) || (defined(YOTTA_CFG) && !defined(NDEBUG)) /*backward compatible*/ + +#if defined __GNUC__ || defined __CC_ARM +/** + * Initialize trace functionality. This method must be called from application process. + * @return 0 when all success, otherwise non zero + */ +int trace_init( void ); +/** + * Free trace memory. This method must be called from application process. + */ +void trace_free( void ); +/** + * Set trace configurations + * Possible parameters: + * + * TRACE_MODE_COLOR + * TRACE_MODE_PLAIN (this exclude color mode) + * TRACE_CARRIAGE_RETURN (print CR before trace line) + * + * TRACE_ACTIVE_LEVEL_ALL - to activate all trace levels + * or TRACE_ACTIVE_LEVEL_DEBUG (alternative) + * TRACE_ACTIVE_LEVEL_INFO + * TRACE_ACTIVE_LEVEL_WARN + * TRACE_ACTIVE_LEVEL_ERROR + * TRACE_ACTIVE_LEVEL_CMD + * TRACE_LEVEL_NONE - to deactivate all traces + * + * @param config Byte size Bit-mask. Bits are descripted above. + * usage e.g. + * @code + * set_trace_config( TRACE_ACTIVE_LEVEL_ALL|TRACE_MODE_COLOR ); + * @endcode + */ +void set_trace_config(uint8_t config); +/** get trace configurations + * @return trace configuration byte + */ +uint8_t get_trace_config(void); +/** + * Set trace prefix function + * pref_f -function return string with null terminated + * Can be used for e.g. time string + * e.g. + * char* trace_time(){ return "rtc-time-in-string"; } + * set_trace_prefix_function( &trace_time ); + */ +void set_trace_prefix_function( char* (*pref_f)(size_t) ); +/** + * Set trace suffix function + * suffix -function return string with null terminated + * Can be used for e.g. time string + * e.g. + * char* trace_suffix(){ return " END"; } + * set_trace_suffix_function( &trace_suffix ); + */ +void set_trace_suffix_function(char* (*suffix_f)(void) ); +/** + * Set trace print function + * By default, trace module print using printf() function, + * but with this you can write own print function, + * for e.g. to other IO device. + */ +void set_trace_print_function( void (*print_f)(const char*) ); +/** + * Set trace print function for tr_cmdline() + */ +void set_trace_cmdprint_function( void (*printf)(const char*) ); +/** + * When trace group contains text in filters, + * trace print will be ignored. + * e.g.: + * set_trace_exclude_filters("mygr"); + * tracef(TRACE_ACTIVE_LEVEL_DEBUG, "ougr", "This is not printed"); + */ +void set_trace_exclude_filters(char* filters); +/** get trace exclude filters + */ +const char* get_trace_exclude_filters(void); +/** + * When trace group contains text in filter, + * trace will be printed. + * e.g.: + * set_trace_include_filters("mygr"); + * tracef(TRACE_ACTIVE_LEVEL_DEBUG, "mygr", "Hi There"); + * tracef(TRACE_ACTIVE_LEVEL_DEBUG, "grp2", "This is not printed"); + */ +void set_trace_include_filters(char* filters); +/** get trace include filters + */ +const char* get_trace_include_filters(void); +/** + * General trace function + * This should be used every time when user want to print out something important thing + * Usage e.g. + * tracef( TRACE_LEVEL_INFO, "mygr", "Hello world!"); + * + * @param dlevel debug level + * @param grp trace group + * @param fmt trace format (like printf) + * @param ... variable arguments related to fmt + */ +void tracef(uint8_t dlevel, const char* grp, const char *fmt, ...) __attribute__ ((__format__(__printf__, 3, 4))); +/** + * Get last trace from buffer + */ +const char* trace_last(void); +/** + * tracef helping function for convert ipv6 + * table to human readable string. + * usage e.g. + * char ipv6[16] = {...}; // ! array length is 16 bytes ! + * tracef(TRACE_LEVEL_INFO, "mygr", "ipv6 addr: %s", trace_ipv6(ipv6)); + * + * @param add_ptr IPv6 Address pointer + * @return temporary buffer where ipv6 is in string format + */ +char* trace_ipv6(const void *addr_ptr); +/** + * tracef helping function for print ipv6 prefix + * usage e.g. + * char ipv6[16] = {...}; // ! array length is 16 bytes ! + * tracef(TRACE_LEVEL_INFO, "mygr", "ipv6 addr: %s", trace_ipv6_prefix(ipv6, 4)); + * + * @param prefix IPv6 Address pointer + * @param prefix_len prefix length + * @return temporary buffer where ipv6 is in string format + */ +char* trace_ipv6_prefix(const uint8_t *prefix, uint8_t prefix_len); +/** + * tracef helping function for convert hex-array to string. + * usage e.g. + * char myarr[] = {0x10, 0x20}; + * tracef(TRACE_LEVEL_INFO, "mygr", "arr: %s", trace_array(myarr, 2)); + * + * @param buf hex array pointer + * @param len buffer length + * @return temporary buffer where string copied + */ +char* trace_array(const uint8_t* buf, uint16_t len); + + +/* + * obsolete - only because of backward compatible reason + * As soon as all these functions are replaced by new tracef() function, these can be removed. + */ + +/** obsolete function */ +void debugf(const char *fmt, ...) __attribute__ ((__format__(__printf__, 1, 2))); //!< obsolete function +void debug(const char *s); //!< obsolete function +void debug_put(char c); //!< obsolete function +void debug_hex(uint8_t x); //!< obsolete function +void debug_int(int i); //!< obsolete function +void printf_array(const void *buf, uint16_t len); //!< obsolete function +void printf_string(const void *buf, uint16_t len); //!< obsolete function +void printf_ipv6_address(const void *addr); //!< obsolete function + +#else //__GNUC__ || __CC_ARM +int trace_init( void ); +void trace_free( void ); +void set_trace_config(uint8_t config); +void set_trace_prefix_function( char* (*pref_f)(size_t) ); +void set_trace_print_function( void (*print_f)(const char*) ); +void set_trace_cmdprint_function( void (*printf)(const char*) ); +void set_trace_exclude_filters(char* filters); +const char* get_trace_exclude_filters(void); +void set_trace_include_filters(char* filters); +const char* get_trace_include_filters(void); +void tracef(uint8_t dlevel, const char* grp, const char *fmt, ...); +char* trace_ipv6(const void *addr_ptr); +char* trace_array(const uint8_t* buf, uint16_t len); +char* trace_ipv6_prefix(const uint8_t *prefix, uint8_t prefix_len); + +//obsolete functions: +void debugf(const char *fmt, ...); +void debug(const char *s); +void debug_put(char c); +void debug_hex(uint8_t x); +void debug_int(int i); +void printf_array(const void *buf, uint16_t len); +void printf_string(const void *buf, uint16_t len); +void printf_ipv6_address(const void *addr); + +#endif + + +#else /*FEA_TRACE_SUPPORT*/ + +// trace functionality not supported +#define trace_init(...) ((int) 0) +#define trace_free(...) ((void) 0) +#define set_trace_config(...) ((void) 0) +#define set_trace_prefix_function(...) ((void) 0) +#define set_trace_print_function(...) ((void) 0) +#define set_trace_cmdprint_function(...) ((void) 0) +#define set_trace_exclude_filters(...) ((void) 0) +#define set_trace_include_filters(...) ((void) 0) +#define get_trace_exclude_filters(...) ((const char*) 0) +#define get_trace_include_filters(...) ((const char*) 0) + +#define tracef(...) ((void) 0) +#define trace_ipv6(...) ((char*) 0) +#define trace_array(...) ((char*) 0) +#define trace_ipv6_prefix(...) ((char*) 0) + +//obsolete +#define debugf(...) ((void) 0) +#define debug(s) ((void) 0) +#define debug_put(c) ((void) 0) +#define debug_hex(x) ((void) 0) +#define debug_int(i) ((void) 0) +#define printf_array(buf, len) ((void) 0) +#define printf_string(buf, len) ((void) 0) +#define printf_ipv6_address(addr) ((void) 0) + +#endif /*FEA_TRACE_SUPPORT*/ + +#ifdef __cplusplus +} +#endif +#endif /* NS_TRACE_H_ */