Diff: esp32-driver/ESP32/ESP32.h

Revision:

0:8f8e8f3cbd1c

diff -r 000000000000 -r 8f8e8f3cbd1c esp32-driver/ESP32/ESP32.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/esp32-driver/ESP32/ESP32.h	Thu Jun 21 17:50:21 2018 +0000
@@ -0,0 +1,257 @@
+/* ESP32Interface Example
+ * Copyright (c) 2015 ARM Limited
+ * Copyright (c) 2017 Renesas Electronics Corporation
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef ESP32_H
+#define ESP32_H
+
+#include "ATParser_os.h"
+
+#define ESP32_SOCKET_COUNT 5
+
+/** ESP32Interface class.
+    This is an interface to a ESP32 radio.
+ */
+class ESP32
+{
+public:
+    /**
+    * Static method to create or retrieve the single ESP32 instance
+    */
+    static ESP32 * getESP32Inst(PinName en, PinName io0, PinName tx, PinName rx, bool debug,
+                                PinName rts, PinName cts, int baudrate);
+
+    ESP32(PinName en, PinName io0, PinName tx, PinName rx, bool debug,
+          PinName rts, PinName cts, int baudrate);
+
+    /**
+    * Sets the Wi-Fi Mode
+    *
+    * @param mode mode of WIFI 1-client, 2-host, 3-both
+    * @return true only if ESP32 was setup correctly
+    */
+    bool set_mode(int mode);
+
+    /**
+    * Enable/Disable DHCP
+    *
+    * @param enabled DHCP enabled when true
+    * @param mode mode of DHCP 0-softAP, 1-station, 2-both
+    * @return true only if ESP32 enables/disables DHCP successfully
+    */
+    bool dhcp(bool enabled, int mode);
+
+    /**
+    * Connect ESP32 to AP
+    *
+    * @param ap the name of the AP
+    * @param passPhrase the password of AP
+    * @return true only if ESP32 is connected successfully
+    */
+    bool connect(const char *ap, const char *passPhrase);
+
+    /**
+    * Disconnect ESP32 from AP
+    *
+    * @return true only if ESP32 is disconnected successfully
+    */
+    bool disconnect(void);
+
+    /**
+    * Get the IP address of ESP32
+    *
+    * @return null-teriminated IP address or null if no IP address is assigned
+    */
+    const char *getIPAddress(void);
+    const char *getIPAddress_ap(void);
+
+    /**
+    * Get the MAC address of ESP32
+    *
+    * @return null-terminated MAC address or null if no MAC address is assigned
+    */
+    const char *getMACAddress(void);
+    const char *getMACAddress_ap(void);
+
+     /** Get the local gateway
+     *
+     *  @return         Null-terminated representation of the local gateway
+     *                  or null if no network mask has been recieved
+     */
+    const char *getGateway();
+    const char *getGateway_ap();
+
+    /** Get the local network mask
+     *
+     *  @return         Null-terminated representation of the local network mask 
+     *                  or null if no network mask has been recieved
+     */
+    const char *getNetmask();
+    const char *getNetmask_ap();
+
+    /* Return RSSI for active connection
+     *
+     * @return      Measured RSSI
+     */
+    int8_t getRSSI();
+
+    /**
+    * Check if ESP32 is conenected
+    *
+    * @return true only if the chip has an IP address
+    */
+    bool isConnected(void);
+
+    /** Scan for available networks
+     *
+     * @param  ap    Pointer to allocated array to store discovered AP
+     * @param  limit Size of allocated @a res array, or 0 to only count available AP
+     * @return       Number of entries in @a res, or if @a count was 0 number of available networks, negative on error
+     *               see @a nsapi_error
+     */
+    int scan(WiFiAccessPoint *res, unsigned limit);
+
+    /**
+    * Open a socketed connection
+    *
+    * @param type the type of socket to open "UDP" or "TCP"
+    * @param id id to give the new socket, valid 0-4
+    * @param port port to open connection with
+    * @param addr the IP address of the destination
+    * @return true only if socket opened successfully
+    */
+    bool open(const char *type, int id, const char* addr, int port);
+
+    /**
+    * Sends data to an open socket
+    *
+    * @param id id of socket to send to
+    * @param data data to be sent
+    * @param amount amount of data to be sent - max 1024
+    * @return true only if data sent successfully
+    */
+    bool send(int id, const void *data, uint32_t amount);
+
+    /**
+    * Receives data from an open socket
+    *
+    * @param id id to receive from
+    * @param data placeholder for returned information
+    * @param amount number of bytes to be received
+    * @return the number of bytes received
+    */
+    int32_t recv(int id, void *data, uint32_t amount);
+
+    /**
+    * Closes a socket
+    *
+    * @param id id of socket to close, valid only 0-4
+    * @param wait_close 
+    * @return true only if socket is closed successfully
+    */
+    bool close(int id, bool wait_close);
+
+    /**
+    * Allows timeout to be changed between commands
+    *
+    * @param timeout_ms timeout of the connection
+    */
+    void setTimeout(uint32_t timeout_ms);
+
+    /**
+    * Checks if data is available
+    */
+    bool readable();
+
+    /**
+    * Checks if data can be written
+    */
+    bool writeable();
+
+    void attach(int id, void (*callback)(void *), void *data);
+    int get_free_id();
+
+    bool config_soft_ap(const char *ap, const char *passPhrase, uint8_t chl, uint8_t ecn);
+
+    bool restart();
+    bool get_ssid(const char *ap);
+    bool cre_server(int port);
+    bool del_server();
+    bool accept(int * p_id);
+
+private:
+    DigitalOut wifi_en;
+    DigitalOut wifi_io0;
+    bool init_end;
+    BufferedSerial _serial;
+    ATParser_os _parser;
+    struct packet {
+        struct packet *next;
+        int id;
+        uint32_t len;
+        uint32_t index;
+        // data follows
+    } *_packets, **_packets_end;
+    int _wifi_mode;
+    int _baudrate;
+    PinName _rts;
+    PinName _cts;
+    int _flow_control;
+
+    std::vector<int> _accept_id;
+    uint32_t _id_bits;
+    uint32_t _id_bits_close;
+    bool _server_act;
+    Mutex _smutex;
+    static ESP32 * instESP32;
+
+    bool _ids[ESP32_SOCKET_COUNT];
+    struct {
+        void (*callback)(void *);
+        void *data;
+        int  Notified;
+    } _cbs[ESP32_SOCKET_COUNT];
+
+    bool startup();
+    bool reset(void);
+    void debugOn(bool debug);
+    void socket_handler(bool connect, int id);
+    void _connect_handler_0();
+    void _connect_handler_1();
+    void _connect_handler_2();
+    void _connect_handler_3();
+    void _connect_handler_4();
+    void _closed_handler_0();
+    void _closed_handler_1();
+    void _closed_handler_2();
+    void _closed_handler_3();
+    void _closed_handler_4();
+    void _packet_handler();
+    void event();
+    bool recv_ap(nsapi_wifi_ap_t *ap);
+
+    char _ip_buffer[16];
+    char _gateway_buffer[16];
+    char _netmask_buffer[16];
+    char _mac_buffer[18];
+
+    char _ip_buffer_ap[16];
+    char _gateway_buffer_ap[16];
+    char _netmask_buffer_ap[16];
+    char _mac_buffer_ap[18];
+};
+
+#endif