Diff: targets/TARGET_TOSHIBA/TARGET_TMPM066/serial_api.c

Revision:

172:7d866c31b3c5

diff -r 89b338f31ef1 -r 7d866c31b3c5 targets/TARGET_TOSHIBA/TARGET_TMPM066/serial_api.c
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_TOSHIBA/TARGET_TMPM066/serial_api.c	Thu Aug 31 17:27:04 2017 +0100
@@ -0,0 +1,249 @@
+/* mbed Microcontroller Library
+ * (C)Copyright TOSHIBA ELECTRONIC DEVICES & STORAGE CORPORATION 2017 All rights reserved
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include <string.h>
+#include "serial_api.h"
+#include "PeripheralNames.h"
+#include "pinmap.h"
+
+#define UART_NUM              2
+
+static const PinMap PinMap_UART_TX[] = {
+    {PC2, SERIAL_0, PIN_DATA(1, 1)},
+    {PE2, SERIAL_1, PIN_DATA(1, 1)},
+    {NC,  NC,       0}
+};
+
+static const PinMap PinMap_UART_RX[] = {
+    {PC3, SERIAL_0, PIN_DATA(1, 0)},
+    {PE1, SERIAL_1, PIN_DATA(1, 0)},
+    {NC,  NC,       0}
+};
+
+static int serial_irq_ids[UART_NUM] = {0};
+static uart_irq_handler irq_handler;
+
+int stdio_uart_inited = 0;
+serial_t stdio_uart;
+
+void serial_init(serial_t *obj, PinName tx, PinName rx)
+{
+    int is_stdio_uart = 0;
+
+    UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX);
+    UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX);
+    UARTName uart_name = (UARTName)pinmap_merge(uart_tx, uart_rx);
+    MBED_ASSERT((int)uart_name != NC);
+
+    obj->index = uart_name;
+    // Initialize UART instance
+    switch (uart_name) {
+        case SERIAL_0:
+            CG_SetFcPeriphA(CG_FC_PERIPH_SIO0, ENABLE);
+            obj->UARTx = UART0;
+            break;
+        case SERIAL_1:
+            CG_SetFcPeriphB(CG_FC_PERIPH_SIO1, ENABLE);
+            obj->UARTx = UART1;
+            break;
+        default:
+            break;
+    }
+
+    obj->uart_config.BaudRate = 9600;
+    obj->uart_config.DataBits = UART_DATA_BITS_8;
+    obj->uart_config.StopBits = UART_STOP_BITS_1;
+    obj->uart_config.Parity   = UART_NO_PARITY;
+    obj->uart_config.FlowCtrl = UART_NONE_FLOW_CTRL;
+
+    if (tx != NC && rx != NC) {
+        obj->uart_config.Mode = UART_ENABLE_RX | UART_ENABLE_TX;
+    } else {
+        if (tx != NC) {
+            obj->uart_config.Mode = UART_ENABLE_TX;
+        } else {
+            if (rx != NC) {
+                obj->uart_config.Mode = UART_ENABLE_RX;
+            }
+        }
+    }
+
+    // Pinout the chosen uart
+    pinmap_pinout(tx, PinMap_UART_TX);
+    pinmap_pinout(rx, PinMap_UART_RX);
+    // Initialize UART configure
+    UART_Enable(obj->UARTx);
+    UART_SetIdleMode(obj->UARTx, ENABLE);
+    UART_Init(obj->UARTx, &obj->uart_config);
+    is_stdio_uart = (uart_name == STDIO_UART) ? (1) : (0);
+    if (is_stdio_uart) {
+        stdio_uart_inited = 1;
+        memcpy(&stdio_uart, obj, sizeof(serial_t));
+    }
+}
+
+void serial_free(serial_t *obj)
+{
+    // Disable UART
+    UART_Disable(obj->UARTx);
+    UART_SWReset(obj->UARTx);
+    // Set information of object to invalid
+    obj->uart_config.BaudRate = 0;
+    obj->uart_config.DataBits = 0;
+    obj->uart_config.StopBits = 0;
+    obj->uart_config.Parity = 0;
+    obj->uart_config.Mode = 0;
+    obj->uart_config.FlowCtrl = 0;
+}
+
+void serial_baud(serial_t *obj, int baudrate)
+{
+    obj->uart_config.BaudRate = baudrate;
+    UART_Init(obj->UARTx, &obj->uart_config);
+}
+
+void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_bits)
+{
+    // 0: 1 stop bits, 1: 2 stop bits
+    MBED_ASSERT((stop_bits == 1) || (stop_bits == 2));
+    MBED_ASSERT((parity == ParityNone) || (parity == ParityOdd) || (parity == ParityEven) ||
+                (parity == ParityForced1) || (parity == ParityForced0));
+    // 0: 7 data bits ... 2: 9 data bits
+    MBED_ASSERT((data_bits > 6) && (data_bits < 10));
+
+    obj->uart_config.DataBits = data_bits;
+    obj->uart_config.StopBits = stop_bits;
+    obj->uart_config.Parity = parity;
+    UART_Init(obj->UARTx, &obj->uart_config);
+}
+
+// INTERRUPTS HANDLING
+void INTTX0_IRQHandler(void)
+{
+    irq_handler(serial_irq_ids[SERIAL_0], TxIrq);
+}
+
+void INTRX0_IRQHandler(void)
+{
+    irq_handler(serial_irq_ids[SERIAL_0], RxIrq);
+}
+
+void INTTX1_IRQHandler(void)
+{
+    irq_handler(serial_irq_ids[SERIAL_1], TxIrq);
+}
+
+void INTRX1_IRQHandler(void)
+{
+    irq_handler(serial_irq_ids[SERIAL_1], RxIrq);
+}
+
+void serial_irq_handler(serial_t *obj, uart_irq_handler handler, uint32_t id)
+{
+    irq_handler = handler;
+    serial_irq_ids[obj->index] = id;
+}
+
+void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable)
+{
+    IRQn_Type irq_n = (IRQn_Type)0;
+
+    switch (obj->index) {
+        case SERIAL_0:
+            if (irq == RxIrq) {
+                irq_n = INTRX0_IRQn;
+            } else {
+                irq_n = INTTX0_IRQn;
+            }
+            break;
+        case SERIAL_1:
+            if (irq == RxIrq) {
+                irq_n = INTRX1_IRQn;
+            } else {
+                irq_n = INTTX1_IRQn;
+            }
+            break;
+        default:
+            break;
+    }
+
+    if (enable) {
+        NVIC_EnableIRQ(irq_n);
+    } else {
+        NVIC_DisableIRQ(irq_n);
+    }
+}
+
+int serial_getc(serial_t *obj)
+{
+    // Wait until Rx buffer is full
+    while (!serial_readable(obj)) {
+        // Do nothing
+    }
+
+    return UART_GetRxData(obj->UARTx);
+}
+
+void serial_putc(serial_t *obj, int c)
+{
+    // Wait until Tx buffer is empty
+    while (!serial_writable(obj)) {
+        // Do nothing
+    }
+
+    UART_SetTxData(obj->UARTx, (uint32_t)c);
+}
+
+int serial_readable(serial_t *obj)
+{
+    int ret = 0;
+
+    if (UART_GetBufState(obj->UARTx, UART_RX) == DONE) {
+        ret = 1;
+    }
+
+    return ret;
+}
+
+int serial_writable(serial_t *obj)
+{
+    int ret = 0;
+
+    if (UART_GetBufState(obj->UARTx, UART_TX) == DONE) {
+        ret = 1;
+    }
+
+    return ret;
+}
+
+void serial_clear(serial_t *obj)
+{
+    UART_TxFIFOClear(obj->UARTx);
+    UART_RxFIFOClear(obj->UARTx);
+    UART_TxBufferClear(obj->UARTx);
+}
+
+void serial_pinout_tx(PinName tx)
+{
+    pinmap_pinout(tx, PinMap_UART_TX);
+}
+
+void serial_break_set(serial_t *obj)
+{
+}
+
+void serial_break_clear(serial_t *obj)
+{
+}