mbed library sources. Supersedes mbed-src. Fixed broken STM32F1xx RTC on rtc_api.c

Dependents:   Nucleo_F103RB_RTC_battery_bkup_pwr_off_okay

Fork of mbed-dev by mbed official

Revision:
149:156823d33999
Parent:
144:ef7eb2e8f9f7
diff -r 21d94c44109e -r 156823d33999 targets/TARGET_ARM_SSG/TARGET_MPS2/PinNames.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_ARM_SSG/TARGET_MPS2/PinNames.h	Fri Oct 28 11:17:30 2016 +0100
@@ -0,0 +1,243 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+        PIN_INPUT,
+        PIN_OUTPUT
+} PinDirection;
+
+#define PORT_SHIFT  5
+
+typedef enum {
+    // MPS2 EXP Pin Names
+        EXP0 = 0,
+        EXP1 = 1,
+        EXP2 = 2,
+        EXP3 = 3,
+        EXP4 = 4,
+        EXP5 = 5,
+        EXP6 = 6,
+        EXP7 = 7,
+        EXP8 = 8,
+        EXP9 = 9,
+        EXP10 = 10,
+        EXP11 = 11,
+        EXP12 = 12,
+        EXP13 = 13,
+        EXP14 = 14,
+        EXP15 = 15,
+        EXP16 = 16,
+        EXP17 = 17,
+        EXP18 = 18,
+        EXP19 = 19,
+        EXP20 = 20,
+        EXP21 = 21,
+        EXP22 = 22,
+        EXP23 = 23,
+        EXP24 = 24,
+        EXP25 = 25,
+        
+        EXP26 = 26,
+        EXP27 = 27,
+        EXP28 = 28,
+        EXP29 = 29,
+        EXP30 = 30,
+        EXP31 = 31,
+        EXP32 = 32, 
+        EXP33 = 33, 
+        EXP34 = 34, 
+        EXP35 = 35, 
+        EXP36 = 36, 
+        EXP37 = 37, 
+        EXP38 = 38, 
+        EXP39 = 39, 
+        EXP40 = 40, 
+        EXP41 = 41, 
+        EXP42 = 42, 
+        EXP43 = 43, 
+        EXP44 = 44, 
+        EXP45 = 45, 
+        EXP46 = 46, 
+        EXP47 = 47, 
+        EXP48 = 48, 
+        EXP49 = 49, 
+        EXP50 = 50, 
+        EXP51 = 51, 
+        
+// Other mbed Pin Names
+
+        //LEDs on mps2
+        //user leds
+        USERLED1 = 100,
+        USERLED2 = 101,
+        //user switches
+        USERSW1  = 110,
+        USERSW2  = 111,
+        
+        //mcc leds
+        LED1 = 200,
+        LED2 = 201,
+        LED3 = 202,
+        LED4 = 203,
+        LED5 = 204,
+        LED6 = 205,
+        LED7 = 206,
+        LED8 = 207,
+        
+        //MCC Switches
+        SW1 = 210,
+        SW2 = 211,
+        SW3 = 212,
+        SW4 = 213,
+        SW5 = 214,
+        SW6 = 215,
+        SW7 = 216,
+        SW8 = 217,
+        
+        //MPS2 SPI header pins j21
+        MOSI_SPI = 300,
+        MISO_SPI = 301,
+        SCLK_SPI = 302,
+        SSEL_SPI = 303,
+        
+        //MPS2 CLCD SPI
+        CLCD_MOSI = 304,
+        CLCD_MISO = 305,
+        CLCD_SCLK = 306,
+        CLCD_SSEL = 307,
+        CLCD_RESET = 308,
+        CLCD_RS = 309,
+        CLCD_RD = 310,
+        CLCD_BL_CTRL = 311,
+        
+        //MPS2 shield 0 SPI
+        SHIELD_0_SPI_SCK = 320, 
+        SHIELD_0_SPI_MOSI = 321,
+        SHIELD_0_SPI_MISO = 322,
+        SHIELD_0_SPI_nCS = 323, 
+
+        //MPS2 shield 1 SPI
+        SHIELD_1_SPI_SCK = 331, 
+        SHIELD_1_SPI_MOSI = 332,
+        SHIELD_1_SPI_MISO = 333,
+        SHIELD_1_SPI_nCS = 334, 
+        
+        //MPS2 shield ADC SPI
+        ADC_MOSI = 650,
+        ADC_MISO = 651,
+        ADC_SCLK = 652,
+        ADC_SSEL = 653,
+        
+        //MPS2 Uart
+        USBTX  = 400,
+        USBRX  = 401,
+        XB_TX = 402,
+        XB_RX = 403,
+        UART_TX2 = 404,
+        UART_RX2 = 405,
+        SH0_TX = 406,
+        SH0_RX = 407,
+        SH1_TX = 408,
+        SH1_RX = 409,
+        
+        //MPS2 I2C touchscreen and audio
+        TSC_SDA = 500,
+        TSC_SCL = 501,
+        AUD_SDA = 502,
+        AUD_SCL = 503,
+    
+        //MPS2 I2C for shield
+        SHIELD_0_SDA = 504, 
+        SHIELD_0_SCL = 505, 
+        SHIELD_1_SDA = 506,
+        SHIELD_1_SCL = 507,
+        
+        //MPS2 shield Analog pins
+        A0_0 = 600,
+        A0_1 = 601,
+        A0_2 = 602,
+        A0_3 = 603,
+        A0_4 = 604,
+        A0_5 = 605,
+        A1_0 = 606,
+        A1_1 = 607,
+        A1_2 = 608,
+        A1_3 = 609,
+        A1_4 = 610,
+        A1_5 = 611,
+        //MPS2 Shield Digital pins
+        D0_0  = EXP0,
+        D0_1  = EXP4,
+        D0_2  = EXP2,
+        D0_3  = EXP3,
+        D0_4  = EXP1,
+        D0_5  = EXP6,
+        D0_6  = EXP7,
+        D0_7  = EXP8,
+        D0_8  = EXP9,
+        D0_9  = EXP10,
+        D0_10 = EXP12,
+        D0_11 = EXP13,
+        D0_12 = EXP14,
+        D0_13 = EXP11,
+        D0_14 = EXP15,
+        D0_15 = EXP5,
+    
+        D1_0  = EXP26,
+        D1_1  = EXP30,
+        D1_2  = EXP28,
+        D1_3  = EXP29,
+        D1_4  = EXP27,
+        D1_5  = EXP32,
+        D1_6  = EXP33,
+        D1_7  = EXP34,
+        D1_8  = EXP35,
+        D1_9  = EXP36,
+        D1_10 = EXP38,
+        D1_11 = EXP39,
+        D1_12 = EXP40,
+        D1_13 = EXP44,
+        D1_14 = EXP41,
+        D1_15 = EXP31,
+        
+        // Not connected
+        NC = (int)0xFFFFFFFF,
+} PinName;
+
+
+typedef enum {
+    PullUp = 2,
+    PullDown = 1,
+    PullNone = 0,
+    Repeater = 3,
+    OpenDrain = 4,
+    PullDefault = PullDown
+} PinMode;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+