mbed library sources. Supersedes mbed-src. Fixed broken STM32F1xx RTC on rtc_api.c

Dependents:   Nucleo_F103RB_RTC_battery_bkup_pwr_off_okay

Fork of mbed-dev by mbed official

Revision:
171:89b338f31ef1
Child:
174:b96e65c34a4d
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_STM/TARGET_STM32F4/flash_api.c	Wed Aug 16 18:27:13 2017 +0100
@@ -0,0 +1,197 @@
+/* mbed Microcontroller Library
+ *******************************************************************************
+ * Copyright (c) 2017, STMicroelectronics
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *******************************************************************************
+ */
+
+#if DEVICE_FLASH
+#include "flash_api.h"
+#include "flash_data.h"
+#include "platform/mbed_critical.h"
+
+// This file is automatically generated
+
+
+static uint32_t GetSector(uint32_t Address);
+static uint32_t GetSectorSize(uint32_t Sector);
+
+int32_t flash_init(flash_t *obj)
+{
+    /* Allow Access to Flash control registers and user Falsh */
+    if (HAL_FLASH_Unlock()) {
+        return -1;
+    } else {
+        return 0;
+    }
+}
+int32_t flash_free(flash_t *obj)
+{
+    /* Disable the Flash option control register access (recommended to protect 
+    the option Bytes against possible unwanted operations) */
+    if (HAL_FLASH_Lock()) {
+        return -1;
+    } else {
+        return 0;
+    }
+}
+int32_t flash_erase_sector(flash_t *obj, uint32_t address)
+{
+    /*Variable used for Erase procedure*/
+    static FLASH_EraseInitTypeDef EraseInitStruct;
+    uint32_t FirstSector;
+    uint32_t SectorError = 0;
+ 
+    if ((address >= (FLASH_BASE + FLASH_SIZE)) || (address < FLASH_BASE)) {
+
+        return -1;
+    }
+   
+    /* Get the 1st sector to erase */
+    FirstSector = GetSector(address);
+
+    /* Fill EraseInit structure*/
+    EraseInitStruct.TypeErase = FLASH_TYPEERASE_SECTORS;
+    EraseInitStruct.VoltageRange = FLASH_VOLTAGE_RANGE_3;
+    EraseInitStruct.Sector = FirstSector;
+    EraseInitStruct.NbSectors = 1;
+    if(HAL_FLASHEx_Erase(&EraseInitStruct, &SectorError) != HAL_OK){
+        return -1;
+    } else {
+        return 0;
+    }
+}
+
+int32_t flash_program_page(flash_t *obj, uint32_t address, const uint8_t *data, uint32_t size)
+{
+
+    if ((address >= (FLASH_BASE + FLASH_SIZE)) || (address < FLASH_BASE)) {
+        return -1;
+    }
+
+  /* Note: If an erase operation in Flash memory also concerns data in the data or instruction cache,
+     you have to make sure that these data are rewritten before they are accessed during code
+     execution. If this cannot be done safely, it is recommended to flush the caches by setting the
+     DCRST and ICRST bits in the FLASH_CR register. */
+    __HAL_FLASH_DATA_CACHE_DISABLE();
+    __HAL_FLASH_INSTRUCTION_CACHE_DISABLE();
+
+    __HAL_FLASH_DATA_CACHE_RESET();
+    __HAL_FLASH_INSTRUCTION_CACHE_RESET();
+
+    __HAL_FLASH_INSTRUCTION_CACHE_ENABLE();
+    __HAL_FLASH_DATA_CACHE_ENABLE();
+
+    while (size > 0) {
+        if (HAL_FLASH_Program(FLASH_TYPEPROGRAM_BYTE, address, (uint64_t)*data) != HAL_OK) {
+            return -1;
+        } else {
+            size--;
+            address++;
+            data++;
+        }
+    }
+    return 0;
+}
+
+uint32_t flash_get_sector_size(const flash_t *obj, uint32_t address)
+{
+    
+    if ((address >= (FLASH_BASE + FLASH_SIZE)) || (address < FLASH_BASE)) {
+        return MBED_FLASH_INVALID_SIZE;
+    }
+
+    return (GetSectorSize(GetSector(address)));
+}
+
+uint32_t flash_get_page_size(const flash_t *obj)
+{
+    // not applicable for STM32F4
+    return (0x4000); // minimum sector size
+}
+uint32_t flash_get_start_address(const flash_t *obj)
+{
+    return FLASH_BASE;
+}
+uint32_t flash_get_size(const flash_t *obj)
+{
+    return FLASH_SIZE;    
+}
+
+/**
+  * @brief  Gets the sector of a given address
+  * @param  None
+  * @retval The sector of a given address
+  */
+static uint32_t GetSector(uint32_t address)
+{
+    uint32_t sector = 0; 
+    uint32_t tmp = address - ADDR_FLASH_SECTOR_0;
+    /* This function supports 1Mb and 2Mb flash sizes */
+#if defined(ADDR_FLASH_SECTOR_12)
+    if (address & 0x100000) { // handle 2nd bank
+        sector = FLASH_SECTOR_12;
+        tmp = address - ADDR_FLASH_SECTOR_12;
+    }
+#endif
+    if (address < ADDR_FLASH_SECTOR_4) { // 16k sectorsize
+        sector += tmp >>14;
+    } else if (address < ADDR_FLASH_SECTOR_5) { //64k sector size
+        sector += FLASH_SECTOR_4; 
+    } else {
+        sector += 4 + (tmp >>17);
+    }
+    return sector;
+}
+
+/**
+  * @brief  Gets sector Size
+  * @param  None
+  * @retval The size of a given sector
+  */
+static uint32_t GetSectorSize(uint32_t Sector)
+{
+    uint32_t sectorsize = 0x00;
+#if defined(FLASH_SECTOR_12)
+    if((Sector == FLASH_SECTOR_0) || (Sector == FLASH_SECTOR_1) || (Sector == FLASH_SECTOR_2) ||\
+       (Sector == FLASH_SECTOR_3) || (Sector == FLASH_SECTOR_12) || (Sector == FLASH_SECTOR_13) ||\
+       (Sector == FLASH_SECTOR_14) || (Sector == FLASH_SECTOR_15)) {
+           sectorsize = 16 * 1024;
+       } else if((Sector == FLASH_SECTOR_4) || (Sector == FLASH_SECTOR_16)) {
+#else
+if((Sector == FLASH_SECTOR_0) || (Sector == FLASH_SECTOR_1) || (Sector == FLASH_SECTOR_2) ||\
+   (Sector == FLASH_SECTOR_3)) {
+       sectorsize = 16 * 1024;
+   } else if(Sector == FLASH_SECTOR_4) {
+#endif
+        sectorsize = 64 * 1024;
+    } else {
+        sectorsize = 128 * 1024;
+    }  
+    return sectorsize;
+}
+
+#endif