Diff: targets/TARGET_ARM_SSG/TARGET_IOTSS/PeripheralNames.h

Revision:

149:156823d33999

Parent:

80:bdf1132a57cf

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_ARM_SSG/TARGET_IOTSS/PeripheralNames.h	Fri Oct 28 11:17:30 2016 +0100
@@ -0,0 +1,91 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2015 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    UART_0 = (int)CMSDK_UART1_BASE,
+    UART_1 = (int)CMSDK_UART3_BASE,
+    UART_2 = (int)CMSDK_UART0_BASE,
+    UART_3 = (int)CMSDK_UART2_BASE
+} UARTName;
+
+typedef enum {
+    I2C_0 = (int)MPS2_TSC_I2C_BASE,
+    I2C_1 = (int)MPS2_AAIC_I2C_BASE,
+    I2C_2 = (int)MPS2_SHIELD0_I2C_BASE, 
+    I2C_3 = (int)MPS2_SHIELD1_I2C_BASE 
+        
+} I2CName;
+
+typedef enum {
+    ADC0_0 = 0,
+    ADC0_1,
+    ADC0_2,
+    ADC0_3,
+    ADC0_4,
+    ADC0_5,
+    ADC0_6,
+    ADC0_7,
+    ADC0_8,
+    ADC0_9,
+    ADC0_10,
+    ADC0_11
+} ADCName;
+
+typedef enum {
+    SPI_0 = (int)MPS2_SSP0_BASE,
+    SPI_1 = (int)MPS2_SSP1_BASE,
+      SPI_2 = (int)MPS2_SSP2_BASE,
+    SPI_3 = (int)MPS2_SSP3_BASE,
+    SPI_4 = (int)MPS2_SSP4_BASE
+} SPIName;
+
+typedef enum {
+    PWM_1 = 0,
+    PWM_2,
+    PWM_3,
+    PWM_4,
+    PWM_5,
+    PWM_6,
+    PWM_7,
+    PWM_8,
+    PWM_9,
+    PWM_10,
+    PWM_11
+} PWMName;
+
+#define STDIO_UART_TX     USBTX
+#define STDIO_UART_RX     USBRX
+#define STDIO_UART        UART_0
+
+#define MBED_UART0        USBTX, USBRX
+#define MBED_UART1        XB_TX, XB_RX
+#define MBED_UART2        SH0_TX, SH0_RX
+#define MBED_UART3        SH1_TX, SH1_RX
+#define MBED_UARTUSB      USBTX, USBRX
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif