Diff: targets/TARGET_Maxim/TARGET_MAX32625/mxc/lp.h

Revision:

150:02e0a0aed4ec

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_Maxim/TARGET_MAX32625/mxc/lp.h	Tue Nov 08 17:45:16 2016 +0000
@@ -0,0 +1,185 @@
+/*******************************************************************************
+ * Copyright (C) 2016 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *
+ * $Date: 2016-03-23 10:22:39 -0500 (Wed, 23 Mar 2016) $
+ * $Revision: 22053 $
+ *
+ ******************************************************************************/
+
+/**
+ * @file  lp.h
+ * @brief This is the high level API for the Lower Power
+ */
+
+#ifndef _LP_H_
+#define _LP_H_
+
+#include "gpio.h"
+#include "pwrman_regs.h"
+#include "pwrseq_regs.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/***** Definitions *****/
+/**
+ * @brief   Enumerations for pull-up and pull-downs
+ *
+ */
+typedef enum {
+    LP_WEAK_PULL_DOWN = -1,
+    LP_NO_PULL = 0,
+    LP_WEAK_PULL_UP = 1
+}
+lp_pu_pd_select_t;
+
+/***** Function Prototypes *****/
+
+/**
+ * @brief   Gets the first boot flag
+ *
+ * @returns 0 if FIRST_BOOT was not set, or 1 if FIRST_BOOT was set
+ */
+__STATIC_INLINE unsigned int LP_IsFirstBoot()
+{
+    return ((MXC_PWRSEQ->reg0 & MXC_F_PWRSEQ_REG0_PWR_FIRST_BOOT) >> MXC_F_PWRSEQ_REG0_PWR_FIRST_BOOT_POS);
+}
+
+/**
+ * @brief   Clears the first boot flag
+ *
+ */
+__STATIC_INLINE void LP_ClearFirstBoot()
+{
+    MXC_PWRSEQ->reg0 &= ~MXC_F_PWRSEQ_REG0_PWR_FIRST_BOOT;
+}
+
+/**
+ * @brief   Determines of program woke up from LP0
+ *
+ * @returns 0 if not woken up from LP0, or 1 if woken from LP0
+ */
+__STATIC_INLINE unsigned int LP_IsLP0WakeUp()
+{
+    //POR should be set and first boot clear
+    if((MXC_PWRMAN->pwr_rst_ctrl & MXC_F_PWRMAN_PWR_RST_CTRL_POR) &&
+            ((MXC_PWRSEQ->reg0 & MXC_F_PWRSEQ_REG0_PWR_FIRST_BOOT) == 0))
+        return 1;
+    else
+        return 0;
+
+}
+
+__STATIC_INLINE unsigned int LP_GetWakeUpFlags(void)
+{
+    return MXC_PWRSEQ->flags;
+}
+/**
+ * @brief   Clear ALL wake-up configuration on all pins. Disables wake-up entirely.
+ */
+void LP_ClearWakeUpConfig(void);
+
+/**
+ * @brief   Read wake-up flags, clear flags, and return to caller.
+ * @returns Wake-up flags from Power Sequencer
+ */
+unsigned int LP_ClearWakeUpFlags(void);
+
+/**
+ * @brief   This function configures one GPIO pin to wake the processor from LP0 or LP1.
+ *          It is not used for LP2 wake-up, as normal GPIO interrupt processing is active in that mode.
+ * @param   gpio      GPIO pointer describing the port and pin for selected wake-up source
+ * @param   act_high If non-zero, the signal is configured for active high wake-up. Otherwise, active low.
+ * @param   wk_pu_pd Selection for the 1 Meg ohm pull-up or pull-down on this pin, see #lp_pu_pd_select_t
+ * @returns #E_NO_ERROR on success, error if unsuccessful.
+ */
+int LP_ConfigGPIOWakeUpDetect(const gpio_cfg_t *gpio, unsigned int act_high, lp_pu_pd_select_t wk_pu_pd);
+
+/**
+ * @brief   Clear the wake-up configuration on one specific GPIO pin
+ * @param   gpio      GPIO pointer describing the port and pin for selected wake-up source
+ * @returns #E_NO_ERROR on success, error if unsuccessful.
+ */
+int LP_ClearGPIOWakeUpDetect(const gpio_cfg_t *gpio);
+
+/**
+ * @brief   Check if a specific gpio triggered the wake up
+ * @param   gpio      GPIO pointer describing the port and pin(s)
+ * @returns 0 = gpio passed in did not trigger a wake up
+ *          nonzero = at least one of the gpio passed in triggered a wake up
+ *                    the bit set represents which pin is the wake up source
+ */
+uint8_t LP_IsGPIOWakeUpSource(const gpio_cfg_t *gpio);
+
+/**
+ * @brief   Wake on USB plug or unplug
+ * @param   plug_en   set to 1 to enable wake-up when USB VBUS is detected
+ * @param   unplug_en set to 1 to enable wake-up when USB VBUS disappears
+ * @returns #E_NO_ERROR on success, error if unsuccessful.
+ */
+int LP_ConfigUSBWakeUp(unsigned int plug_en, unsigned int unplug_en);
+
+/**
+ * @brief   Wake on any enabled event signal from RTC
+ * @param   comp0_en  set to 1 to enable wake-up when RTC Comparison 0 is set
+ * @param   comp1_en  set to 1 to enable wake-up when RTC Comparison 1 is set
+ * @param   prescale_cmp_en  set to 1 to enable wake-up when RTC Prescaler Compare is set
+ * @param   rollover_en  set to 1 to enable wake-up when RTC Roll-over is set
+ * @returns #E_NO_ERROR on success, error if unsuccessful.
+ */
+int LP_ConfigRTCWakeUp(unsigned int comp0_en, unsigned int comp1_en, unsigned int prescale_cmp_en, unsigned int rollover_en);
+
+/**
+ * @brief   Enter LP2 power-saving mode
+ * @returns #E_NO_ERROR on success, error if unsuccessful.
+ */
+int LP_EnterLP2(void);
+
+/**
+ * @brief   Enter LP1 mode, which saves CPU state and SRAM. Execution resumes after this call.
+ * @note    Interrupts should be globally disabled before calling this function.
+ * @returns #E_NO_ERROR on success, error if unsuccessful.
+ */
+int LP_EnterLP1(void);
+
+/**
+ * @brief   Enter the lowest-possible power mode, known as LP0. SRAM contents are lost.
+ *          Waking up from LP0 is like a system reset. This function does not return.
+ * @note    Interrupts are globally disabled upon entering this function.
+ */
+void LP_EnterLP0(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _LP_H_ */