mbed library sources. Supersedes mbed-src. Fixed broken STM32F1xx RTC on rtc_api.c
Dependents: Nucleo_F103RB_RTC_battery_bkup_pwr_off_okay
Fork of mbed-dev by
targets/TARGET_STM/stm_spi_api.c@168:9672193075cf, 2017-07-06 (annotated)
- Committer:
- AnnaBridge
- Date:
- Thu Jul 06 15:42:05 2017 +0100
- Revision:
- 168:9672193075cf
- Parent:
- 167:e84263d55307
- Child:
- 170:19eb464bc2be
This updates the lib to the mbed lib v 146
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
<> | 149:156823d33999 | 1 | /* mbed Microcontroller Library |
<> | 149:156823d33999 | 2 | ******************************************************************************* |
<> | 149:156823d33999 | 3 | * Copyright (c) 2015, STMicroelectronics |
<> | 149:156823d33999 | 4 | * All rights reserved. |
<> | 149:156823d33999 | 5 | * |
<> | 149:156823d33999 | 6 | * Redistribution and use in source and binary forms, with or without |
<> | 149:156823d33999 | 7 | * modification, are permitted provided that the following conditions are met: |
<> | 149:156823d33999 | 8 | * |
<> | 149:156823d33999 | 9 | * 1. Redistributions of source code must retain the above copyright notice, |
<> | 149:156823d33999 | 10 | * this list of conditions and the following disclaimer. |
<> | 149:156823d33999 | 11 | * 2. Redistributions in binary form must reproduce the above copyright notice, |
<> | 149:156823d33999 | 12 | * this list of conditions and the following disclaimer in the documentation |
<> | 149:156823d33999 | 13 | * and/or other materials provided with the distribution. |
<> | 149:156823d33999 | 14 | * 3. Neither the name of STMicroelectronics nor the names of its contributors |
<> | 149:156823d33999 | 15 | * may be used to endorse or promote products derived from this software |
<> | 149:156823d33999 | 16 | * without specific prior written permission. |
<> | 149:156823d33999 | 17 | * |
<> | 149:156823d33999 | 18 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
<> | 149:156823d33999 | 19 | * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
<> | 149:156823d33999 | 20 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
<> | 149:156823d33999 | 21 | * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
<> | 149:156823d33999 | 22 | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
<> | 149:156823d33999 | 23 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
<> | 149:156823d33999 | 24 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
<> | 149:156823d33999 | 25 | * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
<> | 149:156823d33999 | 26 | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
<> | 149:156823d33999 | 27 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
<> | 149:156823d33999 | 28 | ******************************************************************************* |
<> | 149:156823d33999 | 29 | */ |
<> | 149:156823d33999 | 30 | #include "mbed_assert.h" |
<> | 149:156823d33999 | 31 | #include "mbed_error.h" |
<> | 149:156823d33999 | 32 | #include "spi_api.h" |
<> | 149:156823d33999 | 33 | |
<> | 149:156823d33999 | 34 | #if DEVICE_SPI |
<> | 149:156823d33999 | 35 | #include <stdbool.h> |
<> | 149:156823d33999 | 36 | #include <math.h> |
<> | 149:156823d33999 | 37 | #include <string.h> |
<> | 149:156823d33999 | 38 | #include "cmsis.h" |
<> | 149:156823d33999 | 39 | #include "pinmap.h" |
<> | 149:156823d33999 | 40 | #include "PeripheralPins.h" |
AnnaBridge | 168:9672193075cf | 41 | #include "spi_device.h" |
<> | 149:156823d33999 | 42 | |
<> | 149:156823d33999 | 43 | #if DEVICE_SPI_ASYNCH |
<> | 149:156823d33999 | 44 | #define SPI_INST(obj) ((SPI_TypeDef *)(obj->spi.spi)) |
<> | 149:156823d33999 | 45 | #else |
<> | 149:156823d33999 | 46 | #define SPI_INST(obj) ((SPI_TypeDef *)(obj->spi)) |
<> | 149:156823d33999 | 47 | #endif |
<> | 149:156823d33999 | 48 | |
<> | 149:156823d33999 | 49 | #if DEVICE_SPI_ASYNCH |
<> | 149:156823d33999 | 50 | #define SPI_S(obj) (( struct spi_s *)(&(obj->spi))) |
<> | 149:156823d33999 | 51 | #else |
<> | 149:156823d33999 | 52 | #define SPI_S(obj) (( struct spi_s *)(obj)) |
<> | 149:156823d33999 | 53 | #endif |
<> | 149:156823d33999 | 54 | |
<> | 149:156823d33999 | 55 | #ifndef DEBUG_STDIO |
<> | 149:156823d33999 | 56 | # define DEBUG_STDIO 0 |
<> | 149:156823d33999 | 57 | #endif |
<> | 149:156823d33999 | 58 | |
<> | 149:156823d33999 | 59 | #if DEBUG_STDIO |
<> | 149:156823d33999 | 60 | # include <stdio.h> |
<> | 149:156823d33999 | 61 | # define DEBUG_PRINTF(...) do { printf(__VA_ARGS__); } while(0) |
<> | 149:156823d33999 | 62 | #else |
<> | 149:156823d33999 | 63 | # define DEBUG_PRINTF(...) {} |
<> | 149:156823d33999 | 64 | #endif |
<> | 149:156823d33999 | 65 | |
<> | 149:156823d33999 | 66 | void init_spi(spi_t *obj) |
<> | 149:156823d33999 | 67 | { |
<> | 149:156823d33999 | 68 | struct spi_s *spiobj = SPI_S(obj); |
<> | 149:156823d33999 | 69 | SPI_HandleTypeDef *handle = &(spiobj->handle); |
<> | 149:156823d33999 | 70 | |
<> | 149:156823d33999 | 71 | __HAL_SPI_DISABLE(handle); |
<> | 149:156823d33999 | 72 | |
<> | 149:156823d33999 | 73 | DEBUG_PRINTF("init_spi: instance=0x%8X\r\n", (int)handle->Instance); |
<> | 149:156823d33999 | 74 | if (HAL_SPI_Init(handle) != HAL_OK) { |
<> | 149:156823d33999 | 75 | error("Cannot initialize SPI"); |
<> | 149:156823d33999 | 76 | } |
<> | 149:156823d33999 | 77 | |
<> | 149:156823d33999 | 78 | __HAL_SPI_ENABLE(handle); |
<> | 149:156823d33999 | 79 | } |
<> | 149:156823d33999 | 80 | |
<> | 149:156823d33999 | 81 | void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel) |
<> | 149:156823d33999 | 82 | { |
<> | 149:156823d33999 | 83 | struct spi_s *spiobj = SPI_S(obj); |
<> | 149:156823d33999 | 84 | SPI_HandleTypeDef *handle = &(spiobj->handle); |
<> | 149:156823d33999 | 85 | |
<> | 149:156823d33999 | 86 | // Determine the SPI to use |
<> | 149:156823d33999 | 87 | SPIName spi_mosi = (SPIName)pinmap_peripheral(mosi, PinMap_SPI_MOSI); |
<> | 149:156823d33999 | 88 | SPIName spi_miso = (SPIName)pinmap_peripheral(miso, PinMap_SPI_MISO); |
<> | 149:156823d33999 | 89 | SPIName spi_sclk = (SPIName)pinmap_peripheral(sclk, PinMap_SPI_SCLK); |
<> | 149:156823d33999 | 90 | SPIName spi_ssel = (SPIName)pinmap_peripheral(ssel, PinMap_SPI_SSEL); |
<> | 149:156823d33999 | 91 | |
<> | 149:156823d33999 | 92 | SPIName spi_data = (SPIName)pinmap_merge(spi_mosi, spi_miso); |
<> | 149:156823d33999 | 93 | SPIName spi_cntl = (SPIName)pinmap_merge(spi_sclk, spi_ssel); |
<> | 149:156823d33999 | 94 | |
<> | 149:156823d33999 | 95 | spiobj->spi = (SPIName)pinmap_merge(spi_data, spi_cntl); |
<> | 149:156823d33999 | 96 | MBED_ASSERT(spiobj->spi != (SPIName)NC); |
<> | 149:156823d33999 | 97 | |
<> | 149:156823d33999 | 98 | #if defined SPI1_BASE |
<> | 149:156823d33999 | 99 | // Enable SPI clock |
<> | 149:156823d33999 | 100 | if (spiobj->spi == SPI_1) { |
<> | 149:156823d33999 | 101 | __HAL_RCC_SPI1_CLK_ENABLE(); |
<> | 149:156823d33999 | 102 | spiobj->spiIRQ = SPI1_IRQn; |
<> | 149:156823d33999 | 103 | } |
<> | 149:156823d33999 | 104 | #endif |
<> | 149:156823d33999 | 105 | |
<> | 149:156823d33999 | 106 | #if defined SPI2_BASE |
<> | 149:156823d33999 | 107 | if (spiobj->spi == SPI_2) { |
<> | 149:156823d33999 | 108 | __HAL_RCC_SPI2_CLK_ENABLE(); |
<> | 149:156823d33999 | 109 | spiobj->spiIRQ = SPI2_IRQn; |
<> | 149:156823d33999 | 110 | } |
<> | 149:156823d33999 | 111 | #endif |
<> | 149:156823d33999 | 112 | |
<> | 149:156823d33999 | 113 | #if defined SPI3_BASE |
<> | 149:156823d33999 | 114 | if (spiobj->spi == SPI_3) { |
<> | 149:156823d33999 | 115 | __HAL_RCC_SPI3_CLK_ENABLE(); |
<> | 149:156823d33999 | 116 | spiobj->spiIRQ = SPI3_IRQn; |
<> | 149:156823d33999 | 117 | } |
<> | 149:156823d33999 | 118 | #endif |
<> | 149:156823d33999 | 119 | |
<> | 149:156823d33999 | 120 | #if defined SPI4_BASE |
<> | 149:156823d33999 | 121 | if (spiobj->spi == SPI_4) { |
<> | 149:156823d33999 | 122 | __HAL_RCC_SPI4_CLK_ENABLE(); |
<> | 149:156823d33999 | 123 | spiobj->spiIRQ = SPI4_IRQn; |
<> | 149:156823d33999 | 124 | } |
<> | 149:156823d33999 | 125 | #endif |
<> | 149:156823d33999 | 126 | |
<> | 149:156823d33999 | 127 | #if defined SPI5_BASE |
<> | 149:156823d33999 | 128 | if (spiobj->spi == SPI_5) { |
<> | 149:156823d33999 | 129 | __HAL_RCC_SPI5_CLK_ENABLE(); |
<> | 149:156823d33999 | 130 | spiobj->spiIRQ = SPI5_IRQn; |
<> | 149:156823d33999 | 131 | } |
<> | 149:156823d33999 | 132 | #endif |
<> | 149:156823d33999 | 133 | |
<> | 149:156823d33999 | 134 | #if defined SPI6_BASE |
<> | 149:156823d33999 | 135 | if (spiobj->spi == SPI_6) { |
<> | 149:156823d33999 | 136 | __HAL_RCC_SPI6_CLK_ENABLE(); |
<> | 149:156823d33999 | 137 | spiobj->spiIRQ = SPI6_IRQn; |
<> | 149:156823d33999 | 138 | } |
<> | 149:156823d33999 | 139 | #endif |
<> | 149:156823d33999 | 140 | |
<> | 149:156823d33999 | 141 | // Configure the SPI pins |
<> | 149:156823d33999 | 142 | pinmap_pinout(mosi, PinMap_SPI_MOSI); |
<> | 149:156823d33999 | 143 | pinmap_pinout(miso, PinMap_SPI_MISO); |
<> | 149:156823d33999 | 144 | pinmap_pinout(sclk, PinMap_SPI_SCLK); |
<> | 149:156823d33999 | 145 | spiobj->pin_miso = miso; |
<> | 149:156823d33999 | 146 | spiobj->pin_mosi = mosi; |
<> | 149:156823d33999 | 147 | spiobj->pin_sclk = sclk; |
<> | 149:156823d33999 | 148 | spiobj->pin_ssel = ssel; |
<> | 149:156823d33999 | 149 | if (ssel != NC) { |
<> | 149:156823d33999 | 150 | pinmap_pinout(ssel, PinMap_SPI_SSEL); |
<> | 149:156823d33999 | 151 | } else { |
<> | 149:156823d33999 | 152 | handle->Init.NSS = SPI_NSS_SOFT; |
<> | 149:156823d33999 | 153 | } |
<> | 149:156823d33999 | 154 | |
<> | 149:156823d33999 | 155 | /* Fill default value */ |
<> | 149:156823d33999 | 156 | handle->Instance = SPI_INST(obj); |
<> | 149:156823d33999 | 157 | handle->Init.Mode = SPI_MODE_MASTER; |
<> | 149:156823d33999 | 158 | handle->Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_256; |
<> | 149:156823d33999 | 159 | handle->Init.Direction = SPI_DIRECTION_2LINES; |
<> | 149:156823d33999 | 160 | handle->Init.CLKPhase = SPI_PHASE_1EDGE; |
<> | 149:156823d33999 | 161 | handle->Init.CLKPolarity = SPI_POLARITY_LOW; |
AnnaBridge | 165:e614a9f1c9e2 | 162 | handle->Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE; |
<> | 149:156823d33999 | 163 | handle->Init.CRCPolynomial = 7; |
<> | 149:156823d33999 | 164 | handle->Init.DataSize = SPI_DATASIZE_8BIT; |
<> | 149:156823d33999 | 165 | handle->Init.FirstBit = SPI_FIRSTBIT_MSB; |
AnnaBridge | 165:e614a9f1c9e2 | 166 | handle->Init.TIMode = SPI_TIMODE_DISABLE; |
<> | 149:156823d33999 | 167 | |
<> | 149:156823d33999 | 168 | init_spi(obj); |
<> | 149:156823d33999 | 169 | } |
<> | 149:156823d33999 | 170 | |
<> | 149:156823d33999 | 171 | void spi_free(spi_t *obj) |
<> | 149:156823d33999 | 172 | { |
<> | 149:156823d33999 | 173 | struct spi_s *spiobj = SPI_S(obj); |
<> | 149:156823d33999 | 174 | SPI_HandleTypeDef *handle = &(spiobj->handle); |
<> | 149:156823d33999 | 175 | |
<> | 149:156823d33999 | 176 | DEBUG_PRINTF("spi_free\r\n"); |
<> | 149:156823d33999 | 177 | |
<> | 149:156823d33999 | 178 | __HAL_SPI_DISABLE(handle); |
<> | 149:156823d33999 | 179 | HAL_SPI_DeInit(handle); |
<> | 149:156823d33999 | 180 | |
<> | 149:156823d33999 | 181 | #if defined SPI1_BASE |
<> | 149:156823d33999 | 182 | // Reset SPI and disable clock |
<> | 149:156823d33999 | 183 | if (spiobj->spi == SPI_1) { |
<> | 149:156823d33999 | 184 | __HAL_RCC_SPI1_FORCE_RESET(); |
<> | 149:156823d33999 | 185 | __HAL_RCC_SPI1_RELEASE_RESET(); |
<> | 149:156823d33999 | 186 | __HAL_RCC_SPI1_CLK_DISABLE(); |
<> | 149:156823d33999 | 187 | } |
<> | 149:156823d33999 | 188 | #endif |
<> | 149:156823d33999 | 189 | #if defined SPI2_BASE |
<> | 149:156823d33999 | 190 | if (spiobj->spi == SPI_2) { |
<> | 149:156823d33999 | 191 | __HAL_RCC_SPI2_FORCE_RESET(); |
<> | 149:156823d33999 | 192 | __HAL_RCC_SPI2_RELEASE_RESET(); |
<> | 149:156823d33999 | 193 | __HAL_RCC_SPI2_CLK_DISABLE(); |
<> | 149:156823d33999 | 194 | } |
<> | 149:156823d33999 | 195 | #endif |
<> | 149:156823d33999 | 196 | |
<> | 149:156823d33999 | 197 | #if defined SPI3_BASE |
<> | 149:156823d33999 | 198 | if (spiobj->spi == SPI_3) { |
<> | 149:156823d33999 | 199 | __HAL_RCC_SPI3_FORCE_RESET(); |
<> | 149:156823d33999 | 200 | __HAL_RCC_SPI3_RELEASE_RESET(); |
<> | 149:156823d33999 | 201 | __HAL_RCC_SPI3_CLK_DISABLE(); |
<> | 149:156823d33999 | 202 | } |
<> | 149:156823d33999 | 203 | #endif |
<> | 149:156823d33999 | 204 | |
<> | 149:156823d33999 | 205 | #if defined SPI4_BASE |
<> | 149:156823d33999 | 206 | if (spiobj->spi == SPI_4) { |
<> | 149:156823d33999 | 207 | __HAL_RCC_SPI4_FORCE_RESET(); |
<> | 149:156823d33999 | 208 | __HAL_RCC_SPI4_RELEASE_RESET(); |
<> | 149:156823d33999 | 209 | __HAL_RCC_SPI4_CLK_DISABLE(); |
<> | 149:156823d33999 | 210 | } |
<> | 149:156823d33999 | 211 | #endif |
<> | 149:156823d33999 | 212 | |
<> | 149:156823d33999 | 213 | #if defined SPI5_BASE |
<> | 149:156823d33999 | 214 | if (spiobj->spi == SPI_5) { |
<> | 149:156823d33999 | 215 | __HAL_RCC_SPI5_FORCE_RESET(); |
<> | 149:156823d33999 | 216 | __HAL_RCC_SPI5_RELEASE_RESET(); |
<> | 149:156823d33999 | 217 | __HAL_RCC_SPI5_CLK_DISABLE(); |
<> | 149:156823d33999 | 218 | } |
<> | 149:156823d33999 | 219 | #endif |
<> | 149:156823d33999 | 220 | |
<> | 149:156823d33999 | 221 | #if defined SPI6_BASE |
<> | 149:156823d33999 | 222 | if (spiobj->spi == SPI_6) { |
<> | 149:156823d33999 | 223 | __HAL_RCC_SPI6_FORCE_RESET(); |
<> | 149:156823d33999 | 224 | __HAL_RCC_SPI6_RELEASE_RESET(); |
<> | 149:156823d33999 | 225 | __HAL_RCC_SPI6_CLK_DISABLE(); |
<> | 149:156823d33999 | 226 | } |
<> | 149:156823d33999 | 227 | #endif |
<> | 149:156823d33999 | 228 | |
<> | 149:156823d33999 | 229 | // Configure GPIOs |
<> | 149:156823d33999 | 230 | pin_function(spiobj->pin_miso, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0)); |
<> | 149:156823d33999 | 231 | pin_function(spiobj->pin_mosi, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0)); |
<> | 149:156823d33999 | 232 | pin_function(spiobj->pin_sclk, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0)); |
<> | 149:156823d33999 | 233 | if (handle->Init.NSS != SPI_NSS_SOFT) { |
<> | 149:156823d33999 | 234 | pin_function(spiobj->pin_ssel, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0)); |
<> | 149:156823d33999 | 235 | } |
<> | 149:156823d33999 | 236 | } |
<> | 149:156823d33999 | 237 | |
<> | 149:156823d33999 | 238 | void spi_format(spi_t *obj, int bits, int mode, int slave) |
<> | 149:156823d33999 | 239 | { |
<> | 149:156823d33999 | 240 | struct spi_s *spiobj = SPI_S(obj); |
<> | 149:156823d33999 | 241 | SPI_HandleTypeDef *handle = &(spiobj->handle); |
<> | 149:156823d33999 | 242 | |
<> | 149:156823d33999 | 243 | DEBUG_PRINTF("spi_format, bits:%d, mode:%d, slave?:%d\r\n", bits, mode, slave); |
<> | 149:156823d33999 | 244 | |
<> | 149:156823d33999 | 245 | // Save new values |
<> | 149:156823d33999 | 246 | handle->Init.DataSize = (bits == 16) ? SPI_DATASIZE_16BIT : SPI_DATASIZE_8BIT; |
<> | 149:156823d33999 | 247 | |
<> | 149:156823d33999 | 248 | switch (mode) { |
<> | 149:156823d33999 | 249 | case 0: |
<> | 149:156823d33999 | 250 | handle->Init.CLKPolarity = SPI_POLARITY_LOW; |
<> | 149:156823d33999 | 251 | handle->Init.CLKPhase = SPI_PHASE_1EDGE; |
<> | 149:156823d33999 | 252 | break; |
<> | 149:156823d33999 | 253 | case 1: |
<> | 149:156823d33999 | 254 | handle->Init.CLKPolarity = SPI_POLARITY_LOW; |
<> | 149:156823d33999 | 255 | handle->Init.CLKPhase = SPI_PHASE_2EDGE; |
<> | 149:156823d33999 | 256 | break; |
<> | 149:156823d33999 | 257 | case 2: |
<> | 149:156823d33999 | 258 | handle->Init.CLKPolarity = SPI_POLARITY_HIGH; |
<> | 149:156823d33999 | 259 | handle->Init.CLKPhase = SPI_PHASE_1EDGE; |
<> | 149:156823d33999 | 260 | break; |
<> | 149:156823d33999 | 261 | default: |
<> | 149:156823d33999 | 262 | handle->Init.CLKPolarity = SPI_POLARITY_HIGH; |
<> | 149:156823d33999 | 263 | handle->Init.CLKPhase = SPI_PHASE_2EDGE; |
<> | 149:156823d33999 | 264 | break; |
<> | 149:156823d33999 | 265 | } |
<> | 149:156823d33999 | 266 | |
<> | 149:156823d33999 | 267 | if (handle->Init.NSS != SPI_NSS_SOFT) { |
<> | 149:156823d33999 | 268 | handle->Init.NSS = (slave) ? SPI_NSS_HARD_INPUT : SPI_NSS_HARD_OUTPUT; |
<> | 149:156823d33999 | 269 | } |
<> | 149:156823d33999 | 270 | |
<> | 149:156823d33999 | 271 | handle->Init.Mode = (slave) ? SPI_MODE_SLAVE : SPI_MODE_MASTER; |
<> | 149:156823d33999 | 272 | |
<> | 149:156823d33999 | 273 | init_spi(obj); |
<> | 149:156823d33999 | 274 | } |
<> | 149:156823d33999 | 275 | |
<> | 149:156823d33999 | 276 | /* |
<> | 149:156823d33999 | 277 | * Only the IP clock input is family dependant so it computed |
<> | 149:156823d33999 | 278 | * separately in spi_get_clock_freq |
<> | 149:156823d33999 | 279 | */ |
<> | 149:156823d33999 | 280 | extern int spi_get_clock_freq(spi_t *obj); |
<> | 149:156823d33999 | 281 | |
<> | 149:156823d33999 | 282 | static const uint16_t baudrate_prescaler_table[] = {SPI_BAUDRATEPRESCALER_2, |
<> | 149:156823d33999 | 283 | SPI_BAUDRATEPRESCALER_4, |
<> | 149:156823d33999 | 284 | SPI_BAUDRATEPRESCALER_8, |
<> | 149:156823d33999 | 285 | SPI_BAUDRATEPRESCALER_16, |
<> | 149:156823d33999 | 286 | SPI_BAUDRATEPRESCALER_32, |
<> | 149:156823d33999 | 287 | SPI_BAUDRATEPRESCALER_64, |
<> | 149:156823d33999 | 288 | SPI_BAUDRATEPRESCALER_128, |
<> | 149:156823d33999 | 289 | SPI_BAUDRATEPRESCALER_256}; |
<> | 149:156823d33999 | 290 | |
<> | 149:156823d33999 | 291 | void spi_frequency(spi_t *obj, int hz) { |
<> | 149:156823d33999 | 292 | struct spi_s *spiobj = SPI_S(obj); |
<> | 149:156823d33999 | 293 | int spi_hz = 0; |
<> | 149:156823d33999 | 294 | uint8_t prescaler_rank = 0; |
<> | 159:612c381a210f | 295 | uint8_t last_index = (sizeof(baudrate_prescaler_table)/sizeof(baudrate_prescaler_table[0])) - 1; |
<> | 149:156823d33999 | 296 | SPI_HandleTypeDef *handle = &(spiobj->handle); |
<> | 149:156823d33999 | 297 | |
<> | 159:612c381a210f | 298 | /* Calculate the spi clock for prescaler_rank 0: SPI_BAUDRATEPRESCALER_2 */ |
<> | 159:612c381a210f | 299 | spi_hz = spi_get_clock_freq(obj) / 2; |
<> | 149:156823d33999 | 300 | |
<> | 149:156823d33999 | 301 | /* Define pre-scaler in order to get highest available frequency below requested frequency */ |
<> | 159:612c381a210f | 302 | while ((spi_hz > hz) && (prescaler_rank < last_index)) { |
<> | 149:156823d33999 | 303 | spi_hz = spi_hz / 2; |
<> | 149:156823d33999 | 304 | prescaler_rank++; |
<> | 149:156823d33999 | 305 | } |
<> | 149:156823d33999 | 306 | |
<> | 159:612c381a210f | 307 | /* Use the best fit pre-scaler */ |
<> | 159:612c381a210f | 308 | handle->Init.BaudRatePrescaler = baudrate_prescaler_table[prescaler_rank]; |
<> | 159:612c381a210f | 309 | |
<> | 159:612c381a210f | 310 | /* In case maximum pre-scaler still gives too high freq, raise an error */ |
<> | 159:612c381a210f | 311 | if (spi_hz > hz) { |
<> | 160:d5399cc887bb | 312 | DEBUG_PRINTF("WARNING: lowest SPI freq (%d) higher than requested (%d)\r\n", spi_hz, hz); |
<> | 149:156823d33999 | 313 | } |
<> | 149:156823d33999 | 314 | |
<> | 159:612c381a210f | 315 | DEBUG_PRINTF("spi_frequency, request:%d, select:%d\r\n", hz, spi_hz); |
<> | 159:612c381a210f | 316 | |
<> | 149:156823d33999 | 317 | init_spi(obj); |
<> | 149:156823d33999 | 318 | } |
<> | 149:156823d33999 | 319 | |
<> | 149:156823d33999 | 320 | static inline int ssp_readable(spi_t *obj) |
<> | 149:156823d33999 | 321 | { |
<> | 149:156823d33999 | 322 | int status; |
<> | 149:156823d33999 | 323 | struct spi_s *spiobj = SPI_S(obj); |
<> | 149:156823d33999 | 324 | SPI_HandleTypeDef *handle = &(spiobj->handle); |
<> | 149:156823d33999 | 325 | |
<> | 149:156823d33999 | 326 | // Check if data is received |
<> | 149:156823d33999 | 327 | status = ((__HAL_SPI_GET_FLAG(handle, SPI_FLAG_RXNE) != RESET) ? 1 : 0); |
<> | 149:156823d33999 | 328 | return status; |
<> | 149:156823d33999 | 329 | } |
<> | 149:156823d33999 | 330 | |
<> | 149:156823d33999 | 331 | static inline int ssp_writeable(spi_t *obj) |
<> | 149:156823d33999 | 332 | { |
<> | 149:156823d33999 | 333 | int status; |
<> | 149:156823d33999 | 334 | struct spi_s *spiobj = SPI_S(obj); |
<> | 149:156823d33999 | 335 | SPI_HandleTypeDef *handle = &(spiobj->handle); |
<> | 149:156823d33999 | 336 | |
<> | 149:156823d33999 | 337 | // Check if data is transmitted |
<> | 149:156823d33999 | 338 | status = ((__HAL_SPI_GET_FLAG(handle, SPI_FLAG_TXE) != RESET) ? 1 : 0); |
<> | 149:156823d33999 | 339 | return status; |
<> | 149:156823d33999 | 340 | } |
<> | 149:156823d33999 | 341 | |
<> | 149:156823d33999 | 342 | static inline int ssp_busy(spi_t *obj) |
<> | 149:156823d33999 | 343 | { |
<> | 149:156823d33999 | 344 | int status; |
<> | 149:156823d33999 | 345 | struct spi_s *spiobj = SPI_S(obj); |
<> | 149:156823d33999 | 346 | SPI_HandleTypeDef *handle = &(spiobj->handle); |
<> | 149:156823d33999 | 347 | status = ((__HAL_SPI_GET_FLAG(handle, SPI_FLAG_BSY) != RESET) ? 1 : 0); |
<> | 149:156823d33999 | 348 | return status; |
<> | 149:156823d33999 | 349 | } |
<> | 149:156823d33999 | 350 | |
<> | 149:156823d33999 | 351 | int spi_master_write(spi_t *obj, int value) |
<> | 149:156823d33999 | 352 | { |
<> | 149:156823d33999 | 353 | struct spi_s *spiobj = SPI_S(obj); |
<> | 149:156823d33999 | 354 | SPI_HandleTypeDef *handle = &(spiobj->handle); |
<> | 149:156823d33999 | 355 | |
AnnaBridge | 168:9672193075cf | 356 | #if defined(LL_SPI_RX_FIFO_TH_HALF) |
AnnaBridge | 168:9672193075cf | 357 | /* Configure the default data size */ |
AnnaBridge | 168:9672193075cf | 358 | if (handle->Init.DataSize == SPI_DATASIZE_16BIT) { |
AnnaBridge | 168:9672193075cf | 359 | LL_SPI_SetRxFIFOThreshold(SPI_INST(obj), LL_SPI_RX_FIFO_TH_HALF); |
AnnaBridge | 168:9672193075cf | 360 | } else { |
AnnaBridge | 168:9672193075cf | 361 | LL_SPI_SetRxFIFOThreshold(SPI_INST(obj), LL_SPI_RX_FIFO_TH_QUARTER); |
AnnaBridge | 168:9672193075cf | 362 | } |
AnnaBridge | 168:9672193075cf | 363 | #endif |
<> | 149:156823d33999 | 364 | |
AnnaBridge | 168:9672193075cf | 365 | /* Here we're using LL which means direct registers access |
AnnaBridge | 168:9672193075cf | 366 | * There is no error management, so we may end up looping |
AnnaBridge | 168:9672193075cf | 367 | * infinitely here in case of faulty device for insatnce, |
AnnaBridge | 168:9672193075cf | 368 | * but this will increase performances significantly |
AnnaBridge | 168:9672193075cf | 369 | */ |
<> | 149:156823d33999 | 370 | |
AnnaBridge | 168:9672193075cf | 371 | /* Wait TXE flag to transmit data */ |
AnnaBridge | 168:9672193075cf | 372 | while (!LL_SPI_IsActiveFlag_TXE(SPI_INST(obj))); |
AnnaBridge | 168:9672193075cf | 373 | |
AnnaBridge | 168:9672193075cf | 374 | if (handle->Init.DataSize == SPI_DATASIZE_16BIT) { |
AnnaBridge | 168:9672193075cf | 375 | LL_SPI_TransmitData16(SPI_INST(obj), value); |
<> | 149:156823d33999 | 376 | } else { |
AnnaBridge | 168:9672193075cf | 377 | LL_SPI_TransmitData8(SPI_INST(obj), (uint8_t) value); |
AnnaBridge | 168:9672193075cf | 378 | } |
AnnaBridge | 168:9672193075cf | 379 | |
AnnaBridge | 168:9672193075cf | 380 | /* Then wait RXE flag before reading */ |
AnnaBridge | 168:9672193075cf | 381 | while (!LL_SPI_IsActiveFlag_RXNE(SPI_INST(obj))); |
AnnaBridge | 168:9672193075cf | 382 | |
AnnaBridge | 168:9672193075cf | 383 | if (handle->Init.DataSize == SPI_DATASIZE_16BIT) { |
AnnaBridge | 168:9672193075cf | 384 | return LL_SPI_ReceiveData16(SPI_INST(obj)); |
AnnaBridge | 168:9672193075cf | 385 | } else { |
AnnaBridge | 168:9672193075cf | 386 | return LL_SPI_ReceiveData8(SPI_INST(obj)); |
<> | 149:156823d33999 | 387 | } |
<> | 149:156823d33999 | 388 | } |
<> | 149:156823d33999 | 389 | |
AnnaBridge | 167:e84263d55307 | 390 | int spi_master_block_write(spi_t *obj, const char *tx_buffer, int tx_length, char *rx_buffer, int rx_length) |
AnnaBridge | 167:e84263d55307 | 391 | { |
AnnaBridge | 167:e84263d55307 | 392 | int total = (tx_length > rx_length) ? tx_length : rx_length; |
AnnaBridge | 167:e84263d55307 | 393 | |
AnnaBridge | 167:e84263d55307 | 394 | for (int i = 0; i < total; i++) { |
AnnaBridge | 167:e84263d55307 | 395 | char out = (i < tx_length) ? tx_buffer[i] : 0xff; |
AnnaBridge | 167:e84263d55307 | 396 | char in = spi_master_write(obj, out); |
AnnaBridge | 167:e84263d55307 | 397 | if (i < rx_length) { |
AnnaBridge | 167:e84263d55307 | 398 | rx_buffer[i] = in; |
AnnaBridge | 167:e84263d55307 | 399 | } |
AnnaBridge | 167:e84263d55307 | 400 | } |
AnnaBridge | 167:e84263d55307 | 401 | |
AnnaBridge | 167:e84263d55307 | 402 | return total; |
AnnaBridge | 167:e84263d55307 | 403 | } |
AnnaBridge | 167:e84263d55307 | 404 | |
<> | 149:156823d33999 | 405 | int spi_slave_receive(spi_t *obj) |
<> | 149:156823d33999 | 406 | { |
<> | 149:156823d33999 | 407 | return ((ssp_readable(obj) && !ssp_busy(obj)) ? 1 : 0); |
<> | 149:156823d33999 | 408 | }; |
<> | 149:156823d33999 | 409 | |
<> | 149:156823d33999 | 410 | int spi_slave_read(spi_t *obj) |
<> | 149:156823d33999 | 411 | { |
<> | 149:156823d33999 | 412 | SPI_TypeDef *spi = SPI_INST(obj); |
<> | 149:156823d33999 | 413 | struct spi_s *spiobj = SPI_S(obj); |
<> | 149:156823d33999 | 414 | SPI_HandleTypeDef *handle = &(spiobj->handle); |
<> | 149:156823d33999 | 415 | while (!ssp_readable(obj)); |
<> | 149:156823d33999 | 416 | if (handle->Init.DataSize == SPI_DATASIZE_8BIT) { |
<> | 149:156823d33999 | 417 | // Force 8-bit access to the data register |
<> | 149:156823d33999 | 418 | uint8_t *p_spi_dr = 0; |
<> | 149:156823d33999 | 419 | p_spi_dr = (uint8_t *) & (spi->DR); |
<> | 149:156823d33999 | 420 | return (int)(*p_spi_dr); |
<> | 149:156823d33999 | 421 | } else { |
<> | 149:156823d33999 | 422 | return (int)spi->DR; |
<> | 149:156823d33999 | 423 | } |
<> | 149:156823d33999 | 424 | } |
<> | 149:156823d33999 | 425 | |
<> | 149:156823d33999 | 426 | void spi_slave_write(spi_t *obj, int value) |
<> | 149:156823d33999 | 427 | { |
<> | 149:156823d33999 | 428 | SPI_TypeDef *spi = SPI_INST(obj); |
<> | 149:156823d33999 | 429 | struct spi_s *spiobj = SPI_S(obj); |
<> | 149:156823d33999 | 430 | SPI_HandleTypeDef *handle = &(spiobj->handle); |
<> | 149:156823d33999 | 431 | while (!ssp_writeable(obj)); |
<> | 149:156823d33999 | 432 | if (handle->Init.DataSize == SPI_DATASIZE_8BIT) { |
<> | 149:156823d33999 | 433 | // Force 8-bit access to the data register |
<> | 149:156823d33999 | 434 | uint8_t *p_spi_dr = 0; |
<> | 149:156823d33999 | 435 | p_spi_dr = (uint8_t *) & (spi->DR); |
<> | 149:156823d33999 | 436 | *p_spi_dr = (uint8_t)value; |
<> | 149:156823d33999 | 437 | } else { // SPI_DATASIZE_16BIT |
<> | 149:156823d33999 | 438 | spi->DR = (uint16_t)value; |
<> | 149:156823d33999 | 439 | } |
<> | 149:156823d33999 | 440 | } |
<> | 149:156823d33999 | 441 | |
<> | 149:156823d33999 | 442 | int spi_busy(spi_t *obj) |
<> | 149:156823d33999 | 443 | { |
<> | 149:156823d33999 | 444 | return ssp_busy(obj); |
<> | 149:156823d33999 | 445 | } |
<> | 149:156823d33999 | 446 | |
<> | 149:156823d33999 | 447 | #ifdef DEVICE_SPI_ASYNCH |
<> | 149:156823d33999 | 448 | typedef enum { |
<> | 149:156823d33999 | 449 | SPI_TRANSFER_TYPE_NONE = 0, |
<> | 149:156823d33999 | 450 | SPI_TRANSFER_TYPE_TX = 1, |
<> | 149:156823d33999 | 451 | SPI_TRANSFER_TYPE_RX = 2, |
<> | 149:156823d33999 | 452 | SPI_TRANSFER_TYPE_TXRX = 3, |
<> | 149:156823d33999 | 453 | } transfer_type_t; |
<> | 149:156823d33999 | 454 | |
<> | 149:156823d33999 | 455 | |
<> | 149:156823d33999 | 456 | /// @returns the number of bytes transferred, or `0` if nothing transferred |
<> | 149:156823d33999 | 457 | static int spi_master_start_asynch_transfer(spi_t *obj, transfer_type_t transfer_type, const void *tx, void *rx, size_t length) |
<> | 149:156823d33999 | 458 | { |
<> | 149:156823d33999 | 459 | struct spi_s *spiobj = SPI_S(obj); |
<> | 149:156823d33999 | 460 | SPI_HandleTypeDef *handle = &(spiobj->handle); |
<> | 149:156823d33999 | 461 | bool is16bit = (handle->Init.DataSize == SPI_DATASIZE_16BIT); |
<> | 149:156823d33999 | 462 | // the HAL expects number of transfers instead of number of bytes |
<> | 149:156823d33999 | 463 | // so for 16 bit transfer width the count needs to be halved |
<> | 149:156823d33999 | 464 | size_t words; |
<> | 149:156823d33999 | 465 | |
<> | 149:156823d33999 | 466 | DEBUG_PRINTF("SPI inst=0x%8X Start: %u, %u\r\n", (int)handle->Instance, transfer_type, length); |
<> | 149:156823d33999 | 467 | |
<> | 149:156823d33999 | 468 | obj->spi.transfer_type = transfer_type; |
<> | 149:156823d33999 | 469 | |
<> | 149:156823d33999 | 470 | if (is16bit) { |
<> | 149:156823d33999 | 471 | words = length / 2; |
<> | 149:156823d33999 | 472 | } else { |
<> | 149:156823d33999 | 473 | words = length; |
<> | 149:156823d33999 | 474 | } |
<> | 149:156823d33999 | 475 | |
<> | 149:156823d33999 | 476 | // enable the interrupt |
<> | 149:156823d33999 | 477 | IRQn_Type irq_n = spiobj->spiIRQ; |
<> | 153:fa9ff456f731 | 478 | NVIC_DisableIRQ(irq_n); |
<> | 149:156823d33999 | 479 | NVIC_ClearPendingIRQ(irq_n); |
<> | 149:156823d33999 | 480 | NVIC_SetPriority(irq_n, 1); |
<> | 149:156823d33999 | 481 | NVIC_EnableIRQ(irq_n); |
<> | 149:156823d33999 | 482 | |
<> | 149:156823d33999 | 483 | // enable the right hal transfer |
<> | 149:156823d33999 | 484 | int rc = 0; |
<> | 149:156823d33999 | 485 | switch(transfer_type) { |
<> | 149:156823d33999 | 486 | case SPI_TRANSFER_TYPE_TXRX: |
<> | 149:156823d33999 | 487 | rc = HAL_SPI_TransmitReceive_IT(handle, (uint8_t*)tx, (uint8_t*)rx, words); |
<> | 149:156823d33999 | 488 | break; |
<> | 149:156823d33999 | 489 | case SPI_TRANSFER_TYPE_TX: |
<> | 149:156823d33999 | 490 | rc = HAL_SPI_Transmit_IT(handle, (uint8_t*)tx, words); |
<> | 149:156823d33999 | 491 | break; |
<> | 149:156823d33999 | 492 | case SPI_TRANSFER_TYPE_RX: |
<> | 149:156823d33999 | 493 | // the receive function also "transmits" the receive buffer so in order |
<> | 149:156823d33999 | 494 | // to guarantee that 0xff is on the line, we explicitly memset it here |
<> | 149:156823d33999 | 495 | memset(rx, SPI_FILL_WORD, length); |
<> | 149:156823d33999 | 496 | rc = HAL_SPI_Receive_IT(handle, (uint8_t*)rx, words); |
<> | 149:156823d33999 | 497 | break; |
<> | 149:156823d33999 | 498 | default: |
<> | 149:156823d33999 | 499 | length = 0; |
<> | 149:156823d33999 | 500 | } |
<> | 149:156823d33999 | 501 | |
<> | 149:156823d33999 | 502 | if (rc) { |
<> | 149:156823d33999 | 503 | DEBUG_PRINTF("SPI: RC=%u\n", rc); |
<> | 149:156823d33999 | 504 | length = 0; |
<> | 149:156823d33999 | 505 | } |
<> | 149:156823d33999 | 506 | |
<> | 149:156823d33999 | 507 | return length; |
<> | 149:156823d33999 | 508 | } |
<> | 149:156823d33999 | 509 | |
<> | 149:156823d33999 | 510 | // asynchronous API |
<> | 149:156823d33999 | 511 | void spi_master_transfer(spi_t *obj, const void *tx, size_t tx_length, void *rx, size_t rx_length, uint8_t bit_width, uint32_t handler, uint32_t event, DMAUsage hint) |
<> | 149:156823d33999 | 512 | { |
<> | 149:156823d33999 | 513 | struct spi_s *spiobj = SPI_S(obj); |
<> | 149:156823d33999 | 514 | SPI_HandleTypeDef *handle = &(spiobj->handle); |
<> | 149:156823d33999 | 515 | |
<> | 149:156823d33999 | 516 | // TODO: DMA usage is currently ignored |
<> | 149:156823d33999 | 517 | (void) hint; |
<> | 149:156823d33999 | 518 | |
<> | 149:156823d33999 | 519 | // check which use-case we have |
<> | 149:156823d33999 | 520 | bool use_tx = (tx != NULL && tx_length > 0); |
<> | 149:156823d33999 | 521 | bool use_rx = (rx != NULL && rx_length > 0); |
<> | 149:156823d33999 | 522 | bool is16bit = (handle->Init.DataSize == SPI_DATASIZE_16BIT); |
<> | 149:156823d33999 | 523 | |
<> | 149:156823d33999 | 524 | // don't do anything, if the buffers aren't valid |
<> | 149:156823d33999 | 525 | if (!use_tx && !use_rx) |
<> | 149:156823d33999 | 526 | return; |
<> | 149:156823d33999 | 527 | |
<> | 149:156823d33999 | 528 | // copy the buffers to the SPI object |
<> | 149:156823d33999 | 529 | obj->tx_buff.buffer = (void *) tx; |
<> | 149:156823d33999 | 530 | obj->tx_buff.length = tx_length; |
<> | 149:156823d33999 | 531 | obj->tx_buff.pos = 0; |
<> | 149:156823d33999 | 532 | obj->tx_buff.width = is16bit ? 16 : 8; |
<> | 149:156823d33999 | 533 | |
<> | 149:156823d33999 | 534 | obj->rx_buff.buffer = rx; |
<> | 149:156823d33999 | 535 | obj->rx_buff.length = rx_length; |
<> | 149:156823d33999 | 536 | obj->rx_buff.pos = 0; |
<> | 149:156823d33999 | 537 | obj->rx_buff.width = obj->tx_buff.width; |
<> | 149:156823d33999 | 538 | |
<> | 149:156823d33999 | 539 | obj->spi.event = event; |
<> | 149:156823d33999 | 540 | |
<> | 149:156823d33999 | 541 | DEBUG_PRINTF("SPI: Transfer: %u, %u\n", tx_length, rx_length); |
<> | 149:156823d33999 | 542 | |
<> | 149:156823d33999 | 543 | // register the thunking handler |
<> | 149:156823d33999 | 544 | IRQn_Type irq_n = spiobj->spiIRQ; |
<> | 149:156823d33999 | 545 | NVIC_SetVector(irq_n, (uint32_t)handler); |
<> | 149:156823d33999 | 546 | |
<> | 149:156823d33999 | 547 | // enable the right hal transfer |
<> | 149:156823d33999 | 548 | if (use_tx && use_rx) { |
<> | 149:156823d33999 | 549 | // we cannot manage different rx / tx sizes, let's use smaller one |
<> | 149:156823d33999 | 550 | size_t size = (tx_length < rx_length)? tx_length : rx_length; |
<> | 149:156823d33999 | 551 | if(tx_length != rx_length) { |
<> | 149:156823d33999 | 552 | DEBUG_PRINTF("SPI: Full duplex transfer only 1 size: %d\n", size); |
<> | 149:156823d33999 | 553 | obj->tx_buff.length = size; |
<> | 149:156823d33999 | 554 | obj->rx_buff.length = size; |
<> | 149:156823d33999 | 555 | } |
<> | 149:156823d33999 | 556 | spi_master_start_asynch_transfer(obj, SPI_TRANSFER_TYPE_TXRX, tx, rx, size); |
<> | 149:156823d33999 | 557 | } else if (use_tx) { |
<> | 149:156823d33999 | 558 | spi_master_start_asynch_transfer(obj, SPI_TRANSFER_TYPE_TX, tx, NULL, tx_length); |
<> | 149:156823d33999 | 559 | } else if (use_rx) { |
<> | 149:156823d33999 | 560 | spi_master_start_asynch_transfer(obj, SPI_TRANSFER_TYPE_RX, NULL, rx, rx_length); |
<> | 149:156823d33999 | 561 | } |
<> | 149:156823d33999 | 562 | } |
<> | 149:156823d33999 | 563 | |
<> | 153:fa9ff456f731 | 564 | inline uint32_t spi_irq_handler_asynch(spi_t *obj) |
<> | 149:156823d33999 | 565 | { |
<> | 149:156823d33999 | 566 | int event = 0; |
<> | 149:156823d33999 | 567 | |
<> | 149:156823d33999 | 568 | // call the CubeF4 handler, this will update the handle |
<> | 153:fa9ff456f731 | 569 | HAL_SPI_IRQHandler(&obj->spi.handle); |
<> | 149:156823d33999 | 570 | |
<> | 153:fa9ff456f731 | 571 | if (obj->spi.handle.State == HAL_SPI_STATE_READY) { |
<> | 149:156823d33999 | 572 | // When HAL SPI is back to READY state, check if there was an error |
<> | 153:fa9ff456f731 | 573 | int error = obj->spi.handle.ErrorCode; |
<> | 149:156823d33999 | 574 | if(error != HAL_SPI_ERROR_NONE) { |
<> | 149:156823d33999 | 575 | // something went wrong and the transfer has definitely completed |
<> | 149:156823d33999 | 576 | event = SPI_EVENT_ERROR | SPI_EVENT_INTERNAL_TRANSFER_COMPLETE; |
<> | 149:156823d33999 | 577 | |
<> | 149:156823d33999 | 578 | if (error & HAL_SPI_ERROR_OVR) { |
<> | 149:156823d33999 | 579 | // buffer overrun |
<> | 149:156823d33999 | 580 | event |= SPI_EVENT_RX_OVERFLOW; |
<> | 149:156823d33999 | 581 | } |
<> | 149:156823d33999 | 582 | } else { |
<> | 149:156823d33999 | 583 | // else we're done |
<> | 149:156823d33999 | 584 | event = SPI_EVENT_COMPLETE | SPI_EVENT_INTERNAL_TRANSFER_COMPLETE; |
<> | 149:156823d33999 | 585 | } |
<> | 153:fa9ff456f731 | 586 | // enable the interrupt |
<> | 153:fa9ff456f731 | 587 | NVIC_DisableIRQ(obj->spi.spiIRQ); |
<> | 153:fa9ff456f731 | 588 | NVIC_ClearPendingIRQ(obj->spi.spiIRQ); |
<> | 149:156823d33999 | 589 | } |
<> | 149:156823d33999 | 590 | |
<> | 149:156823d33999 | 591 | |
<> | 149:156823d33999 | 592 | return (event & (obj->spi.event | SPI_EVENT_INTERNAL_TRANSFER_COMPLETE)); |
<> | 149:156823d33999 | 593 | } |
<> | 149:156823d33999 | 594 | |
<> | 149:156823d33999 | 595 | uint8_t spi_active(spi_t *obj) |
<> | 149:156823d33999 | 596 | { |
<> | 149:156823d33999 | 597 | struct spi_s *spiobj = SPI_S(obj); |
<> | 149:156823d33999 | 598 | SPI_HandleTypeDef *handle = &(spiobj->handle); |
<> | 149:156823d33999 | 599 | HAL_SPI_StateTypeDef state = HAL_SPI_GetState(handle); |
<> | 149:156823d33999 | 600 | |
<> | 149:156823d33999 | 601 | switch(state) { |
<> | 149:156823d33999 | 602 | case HAL_SPI_STATE_RESET: |
<> | 149:156823d33999 | 603 | case HAL_SPI_STATE_READY: |
<> | 149:156823d33999 | 604 | case HAL_SPI_STATE_ERROR: |
<> | 149:156823d33999 | 605 | return 0; |
<> | 149:156823d33999 | 606 | default: |
<> | 149:156823d33999 | 607 | return 1; |
<> | 149:156823d33999 | 608 | } |
<> | 149:156823d33999 | 609 | } |
<> | 149:156823d33999 | 610 | |
<> | 149:156823d33999 | 611 | void spi_abort_asynch(spi_t *obj) |
<> | 149:156823d33999 | 612 | { |
<> | 149:156823d33999 | 613 | struct spi_s *spiobj = SPI_S(obj); |
<> | 149:156823d33999 | 614 | SPI_HandleTypeDef *handle = &(spiobj->handle); |
<> | 149:156823d33999 | 615 | |
<> | 149:156823d33999 | 616 | // disable interrupt |
<> | 149:156823d33999 | 617 | IRQn_Type irq_n = spiobj->spiIRQ; |
<> | 149:156823d33999 | 618 | NVIC_ClearPendingIRQ(irq_n); |
<> | 149:156823d33999 | 619 | NVIC_DisableIRQ(irq_n); |
<> | 149:156823d33999 | 620 | |
<> | 149:156823d33999 | 621 | // clean-up |
<> | 149:156823d33999 | 622 | __HAL_SPI_DISABLE(handle); |
<> | 149:156823d33999 | 623 | HAL_SPI_DeInit(handle); |
<> | 149:156823d33999 | 624 | HAL_SPI_Init(handle); |
<> | 149:156823d33999 | 625 | __HAL_SPI_ENABLE(handle); |
<> | 149:156823d33999 | 626 | } |
<> | 149:156823d33999 | 627 | |
<> | 149:156823d33999 | 628 | #endif //DEVICE_SPI_ASYNCH |
<> | 149:156823d33999 | 629 | |
<> | 149:156823d33999 | 630 | #endif |