Maxint R&D / Mbed 2 deprecated mBuino_Dice

Electronic dice application for the mBuino platform. Notes: The mBuino starts in Demo mode. In Demo mode the LEDs are lighted, showing sweeps and demo rolls. Connect a button or tilt-switch between P0.4 and GND. No soldering required! When the switch is triggered mBuino goes into Roll mode. In Roll mode mBuino starts with rapid flickering LEDs. Each subsequent switch trigger will perform a roll of the dice, of which the result is shown for ten seconds unless the switch is triggered for another roll. To preserve power, Power down mode is entered after inactivity in Demo mode or Roll mode. Press any button to revive.

Dependencies:   mbed

Fork of mBuino_Dice by Valentin Ivanov

Recent changes

Page Changed Message Modified by Actions
Homepage 12 Sep 2014 Maxint R&D View
Homepage 01 Sep 2014 Maxint R&D View
Homepage 01 Sep 2014 Maxint R&D View
Homepage 01 Sep 2014 Maxint R&D View
Homepage 01 Sep 2014 Maxint R&D View
Homepage 01 Sep 2014 Default content Maxint R&D View