Masha Bozorgzad
123
Dependencies: mbed DigitDisplay Grove_LCD_RGB_Backlight
Revision 0:1e3da2405347, committed 2021-04-07
- Comitter:
- mashabozorgzad
- Date:
- Wed Apr 07 17:37:11 2021 +0000
- Commit message:
- hjgjhgj
Changed in this revision
diff -r 000000000000 -r 1e3da2405347 DigitDisplay.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/DigitDisplay.lib Wed Apr 07 17:37:11 2021 +0000 @@ -0,0 +1,1 @@ +https://os.mbed.com/teams/Seeed/code/DigitDisplay/#d3173c8bfd48
diff -r 000000000000 -r 1e3da2405347 Grove_LCD_RGB_Backlight.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/Grove_LCD_RGB_Backlight.lib Wed Apr 07 17:37:11 2021 +0000 @@ -0,0 +1,1 @@ +https://os.mbed.com/users/cmatz3/code/Grove_LCD_RGB_Backlight/#5ce38ef7a7db
diff -r 000000000000 -r 1e3da2405347 labproject.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/labproject.cpp Wed Apr 07 17:37:11 2021 +0000
@@ -0,0 +1,104 @@
+#include "mbed.h" // include the MBED library
+#include "DigitDisplay.h"
+#include "Grove_LCD_RGB_Backlight.h"
+
+DigitDisplay display(D2,D3);
+Serial blue(D1,D0);
+Grove_LCD_RGB_Backlight LCD(D14,D15); // flash represents the LCD connect
+Grove_LCD_RGB_Backlight flash(D14,D15);
+InterruptIn PIR(D6);
+char buf[20];
+short motion_detected=0;
+void LOW(void);
+char bnum;
+int main()
+{
+ // set button # to zero and shut off RGB leds
+
+ while(1) { // set up infinte loop
+ //button number
+ if ((bnum>='1')&&(bnum<='4')) //is a number button 1..4
+ {
+ switch(bnum)
+ {
+ case '1':
+
+ LCD.clear();
+ LCD.setRGB(0x00,0x80,0x00); //green lcd
+ LCD.locate(0,1); //position for writing
+ printf(buf,"ARM ALARM 2");
+
+ LCD.locate(1,1); //position next line
+ printf(buf,"ALARM OFF 4");
+
+ break;
+ case '2':
+ LCD.clear();
+ LCD.setRGB(0xff,0x00,0x00); //lcd red
+ LCD.locate(0,1);
+ printf(buf,"ALARM is ARMING");
+ printf(buf,"please leave Now");
+
+ display.setBrightness(3); //brightness
+ for (int count=10;count >0;count-- ) // count for 10 sec
+ {
+ display.write(count);
+ wait(1000);
+ }
+
+ LCD.setRGB(0x00,0x80,0x00); //lcd green
+ PIR.fall(&LOW); // connect code at LOW to IRQ
+
+ if(motion_detected == 1) // if motion detected
+ {
+ motion_detected=0; // set variable to 0
+ for(int Flash =0 ;Flash >5;Flash++){
+ flash.setRGB(0xff,0xff,0xff); // set LCD to white
+ wait_ms(500);
+ flash.setRGB(0xff,0x00,0x00);
+ } // set lcd to red // hold red colour for 0.5 seconds
+ LCD.setRGB(0x80,0x00,0x80);
+ printf(buf,"Alarm Sounding ");
+ LCD.locate(1,1);
+ printf(buf,"3 Disable ALarm");
+
+ }
+
+ break;
+
+
+
+ case '3':
+ LCD.clear();
+ LCD.setRGB(0x00,0x80,0x00);
+ LCD.locate(0,1);
+ printf(buf," ALARM DISARMED");
+ LCD.locate(1,1);
+ printf(buf,"2- ARM, 4- OFF");
+ // DigitDisplay::off();
+
+
+ case '4':
+ LCD.setRGB(0x80,0x00,0x80);
+ LCD.locate(0,1);
+ printf(buf," ALARM IS about ");
+ LCD.locate(1,1);
+ printf(buf,"to Turn OFF ");
+ wait_ms(2000);
+ void displayOff();
+ break;
+
+ default:
+
+ break;
+
+ }
+ }
+ }
+ }
+
+
+void LOW(void)
+{
+ motion_detected=1; // motion_detected ==1 motion
+}
\ No newline at end of file
diff -r 000000000000 -r 1e3da2405347 mbed.bld --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Wed Apr 07 17:37:11 2021 +0000 @@ -0,0 +1,1 @@ +https://os.mbed.com/users/mbed_official/code/mbed/builds/3a7713b1edbc \ No newline at end of file