Revision 0:8ab239852e4b, committed 2012-05-25

Comitter:

masato

Date:

Fri May 25 01:28:05 2012 +0000

Child:

1:dc5d150d4fa6

Commit message:

initial release

Changed in this revision

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp	Fri May 25 01:28:05 2012 +0000
@@ -0,0 +1,59 @@
+#include "mbed.h"
+
+I2C i2c(p9, p10);        // sda, scl
+DigitalIn orientationInt(p5);
+Serial pc(USBTX, USBRX); // tx, rx
+
+// define the I2C register address
+const int XOUT = 0x00;
+const int YOUT = 0x01;
+const int ZOUT = 0x02;
+const int TILS = 0x03;
+const int SRST = 0x04;
+const int SPCNT = 0x05;
+const int INTSU = 0x06;
+const int MODE = 0x07;
+const int SR = 0x08;
+const int PDET = 0x09;
+const int PD = 0x0A;
+
+void configMMA7760() {
+    char cmd[2];
+    
+    cmd[0] = 0x00; i2c.write(MODE, cmd, 1); // Standby Mode
+    cmd[0] = 0x00; i2c.write(SPCNT, cmd, 1); // No sleep count
+    cmd[0] = 0x03; i2c.write(INTSU, cmd, 1); // Configure GINT Interrupt
+    cmd[0] = 0xE0; i2c.write(PDET, cmd, 1); // No tap detection enabled
+    cmd[0] = 0x34; i2c.write(SR, cmd, 1); // 8 samples/s, TILT debounce filter = 2
+    cmd[0] = 0x00; i2c.write(PD, cmd, 1); // No tap detection debounce count enabled
+    cmd[0] = 0x41; i2c.write(MODE, cmd, 1); // Active Mode, INT = push-pull and active low
+}
+
+int main() {
+    char cmd[2];
+    
+    configureMMA7760();
+    while (1) {
+        if (!orientationInt) {
+            continue;
+            wait(0.1);
+        }
+        
+        i2c.read(TILT, cmd, 1);
+        int PoLa = (cmd[0] >> 2) & 0x07;
+        int BaFro = cmd[0] & 0x03;
+        
+        switch (PoLa) {
+        case 1: pc.printf("Left\n");
+        case 2: pc.printf("Right\n");
+        case 5: pc.printf("Down\n");
+        case 6: pc.printf("Up\n");
+        }
+        
+        switch (BaFro) {
+        case 1: pc.printf("Front\n");
+        case 2: pc.printf("Back\n");
+        }
+        wait(0.1);
+    }
+}
\ No newline at end of file

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed.lib	Fri May 25 01:28:05 2012 +0000
@@ -0,0 +1,1 @@
+http://mbed.org/projects/libraries/svn/mbed/trunk@43
\ No newline at end of file