File content as of revision 0:b06afbefd350:

#include "mbed.h"
#include "c128x64spi.h"

#define PAGE_SEL 0xB0 
#define COL_SEL  0x10

const char init_cmd[] = {
  0xE2, // S/W RESET
  0xA3, // LCD bias
  // 0xAF, // Display ON
  0xA0, // segment direction
  0xC8, // Common direction
  0x22, // Regulation register select
  0x81, // EV select
  0x2F, // Select EV value
  0x2F, // Power control
  //
  0x40, // initialy display line 40
  0xB0, // set page address
  0x10, // set column addr MSB
  0x00, // set column addr LSB
  // 0xAF, // display ON
  0xA4, // A5 .normal display, all pixels OFF
  0xA6, // A7 .normal display (inverse pixel)
  0xAF, // display ON
};

c128x64spi::c128x64spi(PinName mosi, PinName miso, PinName sclk, PinName cs, PinName rs, PinName reset)
  : _spi(mosi, miso, sclk), _cs(cs), _rs(rs), _reset(reset) {
  int i, j;
  
  for (i = 0; i < 8; i++)
    for (j = 0; j < 128; j++)
        gfx_buf[i][j] = 0;
  
  // _spi.format(8, 3);                 // 8 bit spi mode 3
  _spi.frequency(8000000);         // 8MHz SPI clock ..
  
  _cs = 0;
  _reset = 0;                       // reset
  wait_ms(500);
  _reset = 1;
  
  for (i = 0; i < sizeof(init_cmd); i++) {
    wr_cmd(init_cmd[i]);
  }
}

void c128x64spi::hline(int x0, int x1, int y, int color) {
  for (int x = x0; x < x1; x++) 
    pixel(x, y, color);
}

void c128x64spi::vline(int x, int y0, int y1, int color) {
  for (int y = y0; y < y1; y++) {
    pixel(x, y, color);
  }
}

void c128x64spi::line(int x0, int y0, int x1, int y1, int color) {
#if 1
    int   dx = 0, dy = 0;
    int   dx_sym = 0, dy_sym = 0;
    int   dx_x2 = 0, dy_x2 = 0;
    int   di = 0;

    dx = x1-x0;
    dy = y1-y0;

    if (dx == 0) {        /* vertical line */
        if (y1 > y0) vline(x0,y0,y1,color);
        else vline(x0,y1,y0,color);
        return;
    }

    if (dx > 0) {
        dx_sym = 1;
    } else {
        dx_sym = -1;
    }
    if (dy == 0) {        /* horizontal line */
        if (x1 > x0) hline(x0,x1,y0,color);
        else  hline(x1,x0,y0,color);
        return;
    }

    if (dy > 0) {
        dy_sym = 1;
    } else {
        dy_sym = -1;
    }

    dx = dx_sym*dx;
    dy = dy_sym*dy;

    dx_x2 = dx*2;
    dy_x2 = dy*2;

    if (dx >= dy) {
        di = dy_x2 - dx;
        while (x0 != x1) {

            pixel(x0, y0, color);
            x0 += dx_sym;
            if (di<0) {
                di += dy_x2;
            } else {
                di += dy_x2 - dx_x2;
                y0 += dy_sym;
            }
        }
        pixel(x0, y0, color);
    } else {
        di = dx_x2 - dy;
        while (y0 != y1) {
            pixel(x0, y0, color);
            y0 += dy_sym;
            if (di < 0) {
                di += dx_x2;
            } else {
                di += dx_x2 - dy_x2;
                x0 += dx_sym;
            }
        }
        pixel(x0, y0, color);
    }
#else
  int dx, dy;
  int sx, sy;
  int chg;
  int e;
  int i;
  int tmp;
  
  if (x0 > x1) {
    sx = -1; dx = x0 - x1;
  } else {
    sx = 1; dx = x1 - x0;
  }
  if (y0 > y1) {
    sy = -1; dy = y0 - y1;
  } else {
    sy = 1; dy = y1 - y0;
  }  

  if (dy > dx) {
    tmp = dx; dx = dy; dy = tmp;
    chg = 1;
  } else {
    chg = 0;
  }
  
  e = (dy << 1) - dx;
  for (i = 0; i <= dx; i++) {
    pixel(x0, y0, color);
    if (e >= 0) {
      if (chg)
        x0 += sx;
      else
        y0 += sy;
      e -= (dx << 1);
    }
    if (chg)
      y0 += sy;
    else
      x0 += sx;
    e += (dy << 1);
  }  
#endif      
}

void c128x64spi::clr(int sw) {
  int x, y;
  
  if (sw) sw = 0xff;
  
  for (y = 0; y < 8; y++) {
    // int page = y / 8;
    // wr_cmd(PAGE_SEL | y);
    for (x = 0; x < 128; x++) {
      wr_cmd(PAGE_SEL | y);
      int col = ((x & 0xF0) >> 4) | 0x10;
      wr_cmd(COL_SEL | col);
      wr_cmd(x & 0xf);
      
      gfx_buf[y][x] = sw;
      wr_dat(sw);
    }
  }
}

void c128x64spi::pixel(int x, int y, int sw) {
  if ((x < 0) || (x >= 128)) return;
  if ((y < 0) || (y >= 64)) return;

  int page, col;
  int row_in_page;

  page = y / 8;

  /* Selecting Page */
  wr_cmd(PAGE_SEL | page);

  /* Selecting Column */
  col = ((x & 0xF0) >> 4) | 0x10;
  wr_cmd(COL_SEL|col);
  wr_cmd(x & 0xf);

  /* Pixel location */
  row_in_page = y % 8;

  if (sw)
    gfx_buf[page][x] |= (1 << row_in_page);
  else
    gfx_buf[page][x] &= ~(1 << row_in_page);

  wr_dat(gfx_buf[page][x]);
}

void c128x64spi::wr_cmd(int cmd) {
    _rs = 0; // rs low, cs low for transmitting command
    _cs = 0;
    _spi.write(cmd);
    // wait_ms(5); 
    _cs = 1;
}

void c128x64spi::wr_dat(int dat) {
    _rs = 1; // rs high, cs low for transmitting data
    _cs = 0;                         
    _spi.write(dat); 
    // wait_ms(5);                                                          
    _cs = 1;
}