Diff: microbit_switch_if_3sw.h

Revision:

4:4fe5674bf409

Child:

5:80cb8f9db01e

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/microbit_switch_if_3sw.h	Sun Nov 25 04:41:15 2018 +0000
@@ -0,0 +1,153 @@
+//=================================
+// microbit_switch_if_3sw
+//=================================
+//    BLE switch interface with 3 tact switches for micro:bit 
+//    The MIT License (MIT)   Copyright (c) 2018 Masatomo Kojima
+
+#include "mbed.h"
+#include "MicroBit.h"
+#include "ble/services/BatteryService.h"
+#include "KeyboardService.h"
+#include "Keyboard_types.h"
+#include "HIDServiceBase.h"
+#include "HIDDeviceInformationService.h"
+
+//----------------------
+//  Keybord
+//----------------------
+const int KEY_BS    = 8;  /* Keyboard Backspace */
+const int KEY_TAB   = 9;  /* Keyboard Tab */
+const int KEY_ENTER = 10; /* Keyboard Return (Enter) */
+//const int KEY_ESC = 27;   /* Keyboard Escape */
+const int KEY_SPACE = 32; /* Keyboard Space */
+
+//----------------------
+//  Setting
+//----------------------
+#define NUM_GROUP1         6
+#define NUM_GROUP2         6
+
+#define MODIFY_CTRL     0x100
+#define MODIFY_SHIFT    0x200
+#define MODIFY_OPTION   0x400  /* option or alt */
+#define MODIFY_COMMAND  0x800  /* command or Windows */
+
+const int keyCodeGroup0[3] = {   // Button A, Button B, Button A&B
+   RIGHT_ARROW, 
+   LEFT_ARROW, 
+   MODIFY_COMMAND + 'h'       // アプリ終了
+};
+const int keyCodeGroup1[NUM_GROUP1][2] = { // Switch 1 2
+    {KEY_SPACE,  KEY_ENTER},
+    {RIGHT_ARROW, LEFT_ARROW}, 
+    {DOWN_ARROW, UP_ARROW},
+    {MODIFY_OPTION + DOWN_ARROW, MODIFY_OPTION + UP_ARROW},
+    {'1', '3'},
+    {'h', 'j'}
+};
+const int keyCodeGroup2[NUM_GROUP2]= {  // Switch 3
+    KEY_TAB,
+    0,
+    0, 
+    MODIFY_COMMAND + 'r',    // 再読み込み
+    0,
+    0
+};
+
+//in "BLE_HID\Keyboad_types.h"
+//enum FUNCTION_KEY {
+//    KEY_F1 = 128,   /* F1 key */
+//    KEY_F2,         /* F2 key */
+//    KEY_F3,         /* F3 key */
+//    KEY_F4,         /* F4 key */
+//    KEY_F5,         /* F5 key */
+//    KEY_F6,         /* F6 key */
+//    KEY_F7,         /* F7 key */
+//    KEY_F8,         /* F8 key */
+//    KEY_F9,         /* F9 key */
+//    KEY_F10,        /* F10 key */
+//    KEY_F11,        /* F11 key */
+//    KEY_F12,        /* F12 key */
+// 
+//    KEY_PRINT_SCREEN,   /* Print Screen key */
+//    KEY_SCROLL_LOCK,    /* Scroll lock */
+//    KEY_CAPS_LOCK,      /* caps lock */
+//    KEY_NUM_LOCK,       /* num lock */
+//    KEY_INSERT,         /* Insert key */
+//    KEY_HOME,           /* Home key */
+//    KEY_PAGE_UP,        /* Page Up key */
+//    KEY_PAGE_DOWN,      /* Page Down key */
+// 
+//    RIGHT_ARROW,        /* Right arrow */
+//    LEFT_ARROW,         /* Left arrow */
+//    DOWN_ARROW,         /* Down arrow */
+//    UP_ARROW,           /* Up arrow */
+//};
+
+//----------------------
+//  Display
+//----------------------
+#define TIME_TURN_OFF          7.0   // 非表示モードに入るまでの時間 (s)
+#define SETTING_DISPLAY_WAIT   1.0   // 設定モード表示時間 (s)
+
+//----------------------
+//  State
+//----------------------
+enum STATE {
+    STATE_DESABLE_INPUT,    // 入力無効時
+    STATE_SETTING,          // パラメータ設定時
+    STATE_OPERATING,        // 操作時
+};
+//----------------------
+// Disable debug messages by setting NO_DEBUG
+//----------------------
+#ifndef NO_DEBUG
+#define DEBUG(...) printf(__VA_ARGS__)
+#else
+#define DEBUG(...)
+#endif
+
+//----------------------
+//  BLE & HID
+//----------------------
+/**
+ * IO capabilities of the device. During development, you most likely want "JustWorks", which means
+ * no IO capabilities.
+ * It is also possible to use IO_CAPS_DISPLAY_ONLY to generate and show a pincode on the serial
+ * output.
+ */
+#ifndef HID_SECURITY_IOCAPS
+#define HID_SECURITY_IOCAPS (SecurityManager::IO_CAPS_NONE)
+#endif
+
+/**
+ * Security level. MITM disabled forces "Just Works". If you require MITM, HID_SECURITY_IOCAPS must
+ * be at least IO_CAPS_DISPLAY_ONLY.
+ */
+#ifndef HID_SECURITY_REQUIRE_MITM
+#define HID_SECURITY_REQUIRE_MITM false
+#endif
+
+/**
+ * Initialize security manager: set callback functions and required security level
+ */
+void initializeSecurity(BLE &_ble);
+
+/**
+ * - Initialize auxiliary services required by the HID-over-GATT Profile.
+ * - Initialize common Gap advertisement.
+ *
+ * Demos only have to set a custom device name and appearance, and their HID
+ * service.
+ */
+void initializeHOGP(BLE &_ble);
+
+enum BLE_MESSAGE {
+    BLE_NO_MESSAGE,         // メッセージ無し
+    BLE_CONNECTED,          // BLE接続完了
+    BLE_PAIRING_SUCCESS,    // ペアリング成功
+    BLE_PAIRING_FAILED,     // ペアリング失敗
+};
+
+const char bleDispChar[]={0, 'C', 'P', 'F'};
+ 
\ No newline at end of file