masatomo kojima
BLE switch interface using micro:bit with 3 tact switches or 3 Makey Makey sensors
Diff: microbit_switch_if_3sw.h
- Revision:
- 1:9d0e2e5b5d25
- Child:
- 2:8e2e6c6658be
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/microbit_switch_if_3sw.h Thu Jun 06 19:06:06 2019 +0000
@@ -0,0 +1,233 @@
+//=================================
+// microbit_switch_if_3sw
+//=================================
+// BLE switch interface with 3 tact switches for micro:bit
+// The MIT License (MIT) Copyright (c) 2019 Masatomo Kojima
+
+#include "mbed.h"
+#include "MicroBit.h"
+#include "ble/services/BatteryService.h"
+#include "KeyboardService.h"
+#include "Keyboard_types.h"
+#include "HIDServiceBase.h"
+#include "HIDDeviceInformationService.h"
+
+//----------------------
+// Keybord
+//----------------------
+#define MODIFY_CTRL 0x100
+#define MODIFY_SHIFT 0x200
+#define MODIFY_OPTION 0x400 /* option or alt */
+#define MODIFY_COMMAND 0x800 /* command or Windows */
+
+const int KEY_BS = 8; /* Keyboard Backspace */
+const int KEY_TAB = 9; /* Keyboard Tab */
+const int KEY_ENTER = 10; /* Keyboard Return (Enter) */
+//const int KEY_ESC = 27; /* Keyboard Escape */
+const int KEY_SPACE = 32; /* Keyboard Space */
+
+const int KEY_EQUAL = 0x2b; /* = */
+const int KEY_COMMA = 0x2c; /* , */
+const int KEY_MINUS = 0x2d; /* - */
+const int KEY_PIRIOD = 0x2e; /* . */
+const int KEY_SLASH = 0x2f; /* / */
+const int KEY_QUOT = 0x40; /* ' */
+
+const int KEY_PLUS = MODIFY_SHIFT +0x2b; /* + */
+const int KEY_LT = MODIFY_SHIFT +0x2c; /* < */
+const int KEY_UNDER = MODIFY_SHIFT +0x2d; /* _ */
+const int KEY_GT = MODIFY_SHIFT +0x2e; /* > */
+const int KEY_QUESTION = MODIFY_SHIFT +0x2f; /* ? */
+const int KEY_RBRACKET = MODIFY_SHIFT +0x30; /* ) shif+0 */
+const int KEY_EXCLA = MODIFY_SHIFT +0x31; /* ! shif+1 */
+const int KEY_AT = MODIFY_SHIFT +0x32; /* @ shif+2 */
+const int KEY_NUMBER = MODIFY_SHIFT +0x33; /* # shif+3 */
+const int KEY_DOLL = MODIFY_SHIFT +0x34; /* $ shif+4 */
+const int KEY_PERCENT = MODIFY_SHIFT +0x35; /* % shif+5 */
+const int KEY_CARET = MODIFY_SHIFT +0x36; /* ^ shif+6 */
+const int KEY_AMP = MODIFY_SHIFT +0x37; /* & shif+7 */
+const int KEY_ASTERISK = MODIFY_SHIFT +0x38; /* * shif+8 */
+const int KEY_LBRACKET = MODIFY_SHIFT +0x39; /* ( shif+9 */
+const int KEY_DBLQUOT = MODIFY_SHIFT +0x40; /* " */
+
+//----------------------
+// Setting
+//----------------------
+#define NUM_GROUP1 7
+#define NUM_G1MEMBER 3
+
+#define NUM_GROUP_3SW 7
+#define NUM_3SW_MEMBER 3
+#define NUM_GROUP_JOY 5
+#define NUM_JOY_MEMBER 5
+#define NUM_DEVICE 3
+
+const int keyCodeGroup_AB[3] = { // Button A, Button B, Button A&B
+ 'a',
+ 'b',
+ MODIFY_COMMAND + 'h' // アプリ終了
+};
+const int keyCodeGroup_3SW[NUM_GROUP_3SW][NUM_3SW_MEMBER] = { // P0 P1 P2
+ {KEY_TAB, KEY_SPACE, KEY_ENTER},
+ {KEY_F6, RIGHT_ARROW, LEFT_ARROW},
+ {KEY_F1, KEY_F2, KEY_F3},
+ {MODIFY_COMMAND + 'r', MODIFY_OPTION + DOWN_ARROW, MODIFY_OPTION + UP_ARROW},
+ {KEY_F7, '1', '3'},
+ {KEY_F8, 'h', 'j'},
+ {'0', DOWN_ARROW, UP_ARROW}
+};
+
+const int keyCodeGroup_JOY[NUM_GROUP_JOY][NUM_JOY_MEMBER] = { // 中央 左 右 上 下
+ {0, KEY_TAB, KEY_SPACE, 0, KEY_ENTER },
+ {KEY_HOME, RIGHT_ARROW, LEFT_ARROW, DOWN_ARROW, UP_ARROW },
+ {KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5},
+ {MODIFY_COMMAND+'r', 0, 0, MODIFY_OPTION+DOWN_ARROW, MODIFY_OPTION+UP_ARROW},
+ {KEY_ENTER, KEY_TAB, KEY_SPACE, 0, 0 },
+};
+
+//in "BLE_HID\Keyboad_types.h"
+//enum FUNCTION_KEY {
+// KEY_F1 = 128, /* F1 key */
+// KEY_F2, /* F2 key */
+// KEY_F3, /* F3 key */
+// KEY_F4, /* F4 key */
+// KEY_F5, /* F5 key */
+// KEY_F6, /* F6 key */
+// KEY_F7, /* F7 key */
+// KEY_F8, /* F8 key */
+// KEY_F9, /* F9 key */
+// KEY_F10, /* F10 key */
+// KEY_F11, /* F11 key */
+// KEY_F12, /* F12 key */
+//
+// KEY_PRINT_SCREEN, /* Print Screen key */
+// KEY_SCROLL_LOCK, /* Scroll lock */
+// KEY_CAPS_LOCK, /* caps lock */
+// KEY_NUM_LOCK, /* num lock */
+// KEY_INSERT, /* Insert key */
+// KEY_HOME, /* Home key */
+// KEY_PAGE_UP, /* Page Up key */
+// KEY_PAGE_DOWN, /* Page Down key */
+//
+// RIGHT_ARROW, /* Right arrow */
+// LEFT_ARROW, /* Left arrow */
+// DOWN_ARROW, /* Down arrow */
+// UP_ARROW, /* Up arrow */
+//};
+
+//----------------------
+// Display
+//----------------------
+#define TIME_TURN_OFF 7.0 // 非表示モードに入るまでの時間 (s)
+#define SETTING_DISPLAY_WAIT 1.0 // 設定モード表示時間 (s)
+
+//----------------------
+// State
+//----------------------
+enum STATE {
+ STATE_DESABLE_INPUT, // 入力無効時
+ STATE_SETTING_FREQ, // よく変更する設定
+ STATE_SETTING_DEVICE, // デバイス設定時
+ STATE_OPERATING, // 操作時
+};
+//----------------------
+// Disable debug messages by setting NO_DEBUG
+//----------------------
+#ifndef NO_DEBUG
+#define DEBUG(...) printf(__VA_ARGS__)
+#else
+#define DEBUG(...)
+#endif
+
+//----------------------
+// BLE & HID
+//----------------------
+/**
+ * IO capabilities of the device. During development, you most likely want "JustWorks", which means
+ * no IO capabilities.
+ * It is also possible to use IO_CAPS_DISPLAY_ONLY to generate and show a pincode on the serial
+ * output.
+ */
+#ifndef HID_SECURITY_IOCAPS
+#define HID_SECURITY_IOCAPS (SecurityManager::IO_CAPS_NONE)
+#endif
+
+/**
+ * Security level. MITM disabled forces "Just Works". If you require MITM, HID_SECURITY_IOCAPS must
+ * be at least IO_CAPS_DISPLAY_ONLY.
+ */
+#ifndef HID_SECURITY_REQUIRE_MITM
+#define HID_SECURITY_REQUIRE_MITM false
+#endif
+
+/**
+ * Initialize security manager: set callback functions and required security level
+ */
+void initializeSecurity(BLE &_ble);
+
+/**
+ * - Initialize auxiliary services required by the HID-over-GATT Profile.
+ * - Initialize common Gap advertisement.
+ *
+ * Demos only have to set a custom device name and appearance, and their HID
+ * service.
+ */
+void initializeHOGP(BLE &_ble);
+
+enum BLE_MESSAGE {
+ BLE_NO_MESSAGE, // メッセージ無し
+ BLE_CONNECTED, // BLE接続完了
+ BLE_PAIRING_SUCCESS, // ペアリング成功
+ BLE_PAIRING_FAILED, // ペアリング失敗
+};
+
+//----------------------
+// Display Message
+//----------------------
+#define DISP_NO_MESSAGE 0 // メッセージ無し
+#define DISP_PRESS_BUTTON_A 'A' // ボタンA
+#define DISP_PRESS_BUTTON_B 'B' // ボタンB
+#define DISP_HOLD_BUTTON_AB 'H' // ボタンABの長押し
+#define DISP_ACTIVE_IO_P0 '0' // 端子P0
+#define DISP_ACTIVE_IO_P1 '1' // 端子P1
+#define DISP_ACTIVE_IO_P2 '2' // 端子P2
+#define DISP_BLE_WAIT 'W' // BLE接続待ち
+#define DISP_BLE_CONNECTED 'C' // BLE接続完了
+#define DISP_BLE_PAIRING_SUCCESS 'P' // ペアリング成功
+#define DISP_BLE_PAIRING_FAILED 'F' // ペアリング失敗
+#define DISP_BLE_ERROR_SENDDATA 'E' // データ送出時エラー
+#define DISP_BLE_ERROR_WRITEDDATA 'e' // データ書込時エラー
+#define DISP_ERROR_INCORRECT_CODE 'I' // コーディングエラー
+#define DISP_ERROR_DEVICE_CONNECT 'V' // デバイス接続エラー
+
+#define DISP_SETTING_FREQ 'S' // よく変更する設定
+#define DISP_SETTING_DEVICE 'D' // デバイス設定
+#define DISP_SETTING_SPEC_1 'X' // 個別設定１
+#define DISP_SETTING_SPEC_2 'Y' // 個別設定２
+#define DISP_SETTING_SPEC_3 'Z' // 個別設定３
+
+const char bleDispChar[]={
+ DISP_NO_MESSAGE,
+ DISP_BLE_CONNECTED,
+ DISP_BLE_PAIRING_SUCCESS,
+ DISP_BLE_PAIRING_FAILED};
+
+
+//----------------------
+// Input Buffer
+//----------------------
+#define BUTTON_STATUS_DOWN 0x100 // 押された
+#define BUTTON_STATUS_UP 0x200 // 離された
+#define BUTTON_STATUS_HOLD 0x300 // 保持された
+
+#define BUTTON_NAME_A 1 // A
+#define BUTTON_NAME_B 2 // B
+#define BUTTON_NAME_P0 3 // P0
+#define BUTTON_NAME_P1 4 // P1
+#define BUTTON_NAME_P2 5 // P2
+
+
+
+
+
+