![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
This is a simple mbed client example demonstrating, registration of a device with mbed Device Connector and reading and writing values as well as deregistering on different Network Interfaces including Ethernet, WiFi, 6LoWPAN ND and Thread respectively.
Fork of mbed-os-example-client by
main.cpp
- Committer:
- mbed_official
- Date:
- 2016-08-03
- Revision:
- 10:4a3aaf2e130a
- Parent:
- 5:b7d7ca715fdb
- Child:
- 13:c44e318674db
File content as of revision 10:4a3aaf2e130a:
/* * Copyright (c) 2015 ARM Limited. All rights reserved. * SPDX-License-Identifier: Apache-2.0 * Licensed under the Apache License, Version 2.0 (the License); you may * not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an AS IS BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #include "simpleclient.h" #include <string> #include <sstream> #include <vector> #include "mbed-trace/mbed_trace.h" #include "security.h" #include "mbed.h" #include "rtos.h" #define ETHERNET 1 #define WIFI 2 #define MESH_LOWPAN_ND 3 #define MESH_THREAD 4 #define STRINGIFY(s) #s #if MBED_CONF_APP_NETWORK_INTERFACE == WIFI #include "ESP8266Interface.h" ESP8266Interface esp(D1, D0); #elif MBED_CONF_APP_NETWORK_INTERFACE == ETHERNET #include "EthernetInterface.h" EthernetInterface eth; #elif MBED_CONF_APP_NETWORK_INTERFACE == MESH_LOWPAN_ND #define MESH #include "NanostackInterface.h" LoWPANNDInterface mesh; #elif MBED_CONF_APP_NETWORK_INTERFACE == MESH_THREAD #define MESH #include "NanostackInterface.h" ThreadInterface mesh; #endif #ifndef MESH // This is address to mbed Device Connector #define MBED_SERVER_ADDRESS "coap://api.connector.mbed.com:5684" #else // This is address to mbed Device Connector #define MBED_SERVER_ADDRESS "coaps://[2607:f0d0:2601:52::20]:5684" #endif Serial output(USBTX, USBRX); // These are example resource values for the Device Object struct MbedClientDevice device = { "Manufacturer_String", // Manufacturer "Type_String", // Type "ModelNumber_String", // ModelNumber "SerialNumber_String" // SerialNumber }; // Instantiate the class which implements LWM2M Client API (from simpleclient.h) MbedClient mbed_client(device); // In case of K64F board , there is button resource available // to change resource value and unregister #ifdef TARGET_K64F // Set up Hardware interrupt button. InterruptIn obs_button(SW2); InterruptIn unreg_button(SW3); #else //In non K64F boards , set up a timer to simulate updating resource, // there is no functionality to unregister. Ticker timer; #endif // LED Output DigitalOut led1(LED1); /* * The Led contains one property (pattern) and a function (blink). * When the function blink is executed, the pattern is read, and the LED * will blink based on the pattern. */ class LedResource { public: LedResource() { // create ObjectID with metadata tag of '3201', which is 'digital output' led_object = M2MInterfaceFactory::create_object("3201"); M2MObjectInstance* led_inst = led_object->create_object_instance(); // 5853 = Multi-state output M2MResource* pattern_res = led_inst->create_dynamic_resource("5853", "Pattern", M2MResourceInstance::STRING, false); // read and write pattern_res->set_operation(M2MBase::GET_PUT_ALLOWED); // set initial pattern (toggle every 200ms. 7 toggles in total) pattern_res->set_value((const uint8_t*)"500:500:500:500:500:500:500", 27); // there's not really an execute LWM2M ID that matches... hmm... M2MResource* led_res = led_inst->create_dynamic_resource("5850", "Blink", M2MResourceInstance::OPAQUE, false); // we allow executing a function here... led_res->set_operation(M2MBase::POST_ALLOWED); // when a POST comes in, we want to execute the led_execute_callback led_res->set_execute_function(execute_callback(this, &LedResource::blink)); } M2MObject* get_object() { return led_object; } void blink(void *) { // read the value of 'Pattern' M2MObjectInstance* inst = led_object->object_instance(); M2MResource* res = inst->resource("5853"); // values in mbed Client are all buffers, and we need a vector of int's uint8_t* buffIn = NULL; uint32_t sizeIn; res->get_value(buffIn, sizeIn); // turn the buffer into a string, and initialize a vector<int> on the heap std::string s((char*)buffIn, sizeIn); std::vector<uint32_t>* v = new std::vector<uint32_t>; output.printf("led_execute_callback pattern=%s\r\n", s.c_str()); // our pattern is something like 500:200:500, so parse that std::size_t found = s.find_first_of(":"); while (found!=std::string::npos) { v->push_back(atoi((const char*)s.substr(0,found).c_str())); s = s.substr(found+1); found=s.find_first_of(":"); if(found == std::string::npos) { v->push_back(atoi((const char*)s.c_str())); } } // do_blink is called with the vector, and starting at -1 do_blink(v, 0); } private: M2MObject* led_object; void do_blink(std::vector<uint32_t>* pattern, uint16_t position) { // blink the LED led1 = !led1; // up the position, if we reached the end of the vector if (position >= pattern->size()) { // free memory, and exit this function delete pattern; return; } // how long do we need to wait before the next blink? uint32_t delay_ms = pattern->at(position); // Invoke same function after `delay_ms` (upping position) Thread::wait(delay_ms); do_blink(pattern, ++position); } }; /* * The button contains one property (click count). * When `handle_button_click` is executed, the counter updates. */ class ButtonResource { public: ButtonResource(): counter(0) { // create ObjectID with metadata tag of '3200', which is 'digital input' btn_object = M2MInterfaceFactory::create_object("3200"); M2MObjectInstance* btn_inst = btn_object->create_object_instance(); // create resource with ID '5501', which is digital input counter M2MResource* btn_res = btn_inst->create_dynamic_resource("5501", "Button", M2MResourceInstance::INTEGER, true /* observable */); // we can read this value btn_res->set_operation(M2MBase::GET_ALLOWED); // set initial value (all values in mbed Client are buffers) // to be able to read this data easily in the Connector console, we'll use a string btn_res->set_value((uint8_t*)"0", 1); } ~ButtonResource() { } M2MObject* get_object() { return btn_object; } /* * When you press the button, we read the current value of the click counter * from mbed Device Connector, then up the value with one. */ void handle_button_click() { M2MObjectInstance* inst = btn_object->object_instance(); M2MResource* res = inst->resource("5501"); // up counter counter++; #ifdef TARGET_K64F printf("handle_button_click, new value of counter is %d\r\n", counter); #else printf("simulate button_click, new value of counter is %d\r\n", counter); #endif // serialize the value of counter as a string, and tell connector char buffer[20]; int size = sprintf(buffer,"%d",counter); res->set_value((uint8_t*)buffer, size); } private: M2MObject* btn_object; uint16_t counter; }; // Network interaction must be performed outside of interrupt context Semaphore updates(0); volatile bool registered = false; volatile bool clicked = false; osThreadId mainThread; void unregister() { registered = false; updates.release(); } void button_clicked() { clicked = true; updates.release(); } // debug printf function void trace_printer(const char* str) { printf("%s\r\n", str); } // Status indication Ticker status_ticker; DigitalOut status_led(LED1); void blinky() { status_led = !status_led; } // Entry point to the program int main() { #ifndef MBEDTLS_ENTROPY_HARDWARE_ALT #ifdef MBEDTLS_TEST_NULL_ENTROPY #warning "mbedTLS security feature is disabled. Connection will not be secure !! Implement proper hardware entropy for your selected hardware." #else #error "This hardware does not have entropy, endpoint will not register to Connector.\ You need to enable NULL ENTROPY for your application, but if this configuration change is made then no security is offered by mbed TLS.\ Add MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES and MBEDTLS_TEST_NULL_ENTROPY in mbed_app.json macros to register your endpoint." #endif #endif status_ticker.attach_us(blinky, 250000); // Keep track of the main thread mainThread = osThreadGetId(); // Sets the console baud-rate output.baud(115200); output.printf("Starting mbed Client example...\r\n"); mbed_trace_init(); mbed_trace_print_function_set(trace_printer); NetworkInterface *network_interface = 0; int connect_success = -1; #if MBED_CONF_APP_NETWORK_INTERFACE == WIFI output.printf("\n\rUsing WiFi \r\n"); output.printf("\n\rConnecting to WiFi..\r\n"); connect_success = esp.connect(MBED_CONF_APP_WIFI_SSID, MBED_CONF_APP_WIFI_PASSWORD); network_interface = &esp; #elif MBED_CONF_APP_NETWORK_INTERFACE == ETHERNET output.printf("Using Ethernet\r\n"); connect_success = eth.connect(); network_interface = ð #endif #ifdef MESH output.printf("Using Mesh\r\n"); output.printf("\n\rConnecting to Mesh..\r\n"); connect_success = mesh.connect(); network_interface = &mesh; #endif if(connect_success == 0) { output.printf("\n\rConnected to Network successfully\r\n"); } else { output.printf("\n\rConnection to Network Failed %d! Exiting application....\r\n", connect_success); return 0; } const char *ip_addr = network_interface->get_ip_address(); if (ip_addr) { output.printf("IP address %s\r\n", ip_addr); } else { output.printf("No IP address\r\n"); } // we create our button and LED resources ButtonResource button_resource; LedResource led_resource; #ifdef TARGET_K64F // On press of SW3 button on K64F board, example application // will call unregister API towards mbed Device Connector //unreg_button.fall(&mbed_client,&MbedClient::test_unregister); unreg_button.fall(&unregister); // Observation Button (SW2) press will send update of endpoint resource values to connector obs_button.fall(&button_clicked); #else // Send update of endpoint resource values to connector every 15 seconds periodically timer.attach(&button_clicked, 15.0); #endif // Create endpoint interface to manage register and unregister mbed_client.create_interface(MBED_SERVER_ADDRESS, network_interface); // Create Objects of varying types, see simpleclient.h for more details on implementation. M2MSecurity* register_object = mbed_client.create_register_object(); // server object specifying connector info M2MDevice* device_object = mbed_client.create_device_object(); // device resources object // Create list of Objects to register M2MObjectList object_list; // Add objects to list object_list.push_back(device_object); object_list.push_back(button_resource.get_object()); object_list.push_back(led_resource.get_object()); // Set endpoint registration object mbed_client.set_register_object(register_object); // Register with mbed Device Connector mbed_client.test_register(register_object, object_list); registered = true; while (true) { updates.wait(25000); if(registered) { if(!clicked) { mbed_client.test_update_register(); } }else { break; } if(clicked) { clicked = false; button_resource.handle_button_click(); } } mbed_client.test_unregister(); status_ticker.detach(); }