This is a simple mbed client example demonstrating, registration of a device with mbed Device Connector and reading and writing values as well as deregistering on different Network Interfaces including Ethernet, WiFi, 6LoWPAN ND and Thread respectively.

Dependencies:   lwip

Fork of mbed-os-example-client by mbed-os-examples

Committer:
Yogesh Pande
Date:
Mon Jul 25 16:32:20 2016 +0300
Revision:
0:7d5ec759888b
Update example home repo at https://github.com/ARMmbed/mbed-os-example-client

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Yogesh Pande 0:7d5ec759888b 1 ## Radio module identification
Yogesh Pande 0:7d5ec759888b 2
Yogesh Pande 0:7d5ec759888b 3 * Make sure that you are using the same radio modules on both server and client sides:
Yogesh Pande 0:7d5ec759888b 4
Yogesh Pande 0:7d5ec759888b 5 * If the radio module on the gateway router supports the 2.4 GHz frequency band, the client side must have an mbed 6LoWPAN shield that uses a 2.4 GHz radio module (such as Atmel AT86RF233).
Yogesh Pande 0:7d5ec759888b 6
Yogesh Pande 0:7d5ec759888b 7 * If the radio module on the gateway router supports the sub-GHz frequency band, the client side must have an mbed 6LoWPAN shield that uses a sub-GHz radio module (such as Atmel AT86RF212B).
Yogesh Pande 0:7d5ec759888b 8
Yogesh Pande 0:7d5ec759888b 9 * An easy way to identify which frequency band your setup uses is to check the **Antenna size** on the radio module:
Yogesh Pande 0:7d5ec759888b 10
Yogesh Pande 0:7d5ec759888b 11 * The sub-GHz band antenna is larger than the 2.4 GHz antenna.
Yogesh Pande 0:7d5ec759888b 12
Yogesh Pande 0:7d5ec759888b 13 * For the client side (mbed 6LoWPAN shield connected to an FRDM-K64F board), see the image below:
Yogesh Pande 0:7d5ec759888b 14 ![](img/Radio_Identifications.png)
Yogesh Pande 0:7d5ec759888b 15
Yogesh Pande 0:7d5ec759888b 16 * For the gateway router, see the image below:
Yogesh Pande 0:7d5ec759888b 17 ![](img/Radio_Identifications_GW.png)