marcus chiou
mbed library sources
Fork of
mbed-src
by 
mbed official
Diff: targets/hal/TARGET_NXP/TARGET_LPC43XX/TARGET_LPC4337/PinNames.h
- Revision:
- 592:a274ee790e56
- Parent:
- 315:1d806f4588f1
--- a/targets/hal/TARGET_NXP/TARGET_LPC43XX/TARGET_LPC4337/PinNames.h Wed Jul 15 08:15:08 2015 +0100
+++ b/targets/hal/TARGET_NXP/TARGET_LPC43XX/TARGET_LPC4337/PinNames.h Fri Jul 17 09:15:10 2015 +0100
@@ -14,8 +14,6 @@
* limitations under the License.
*/
-#define BOARD_REV_B
-
#ifndef MBED_PINNAMES_H
#define MBED_PINNAMES_H
@@ -451,29 +449,6 @@
SFP_INS0 = MBED_PIN(0x1C, 0, 0, 0), // Interrupt select for pin interrupts 0 to 3
SFP_INS1 = MBED_PIN(0x1C, 1, 0, 0), // Interrupt select for pin interrupts 4 to 7
-/*
-#define MBED_ADC_NUM(MBED_PIN) ((MBED_PIN >> 5) & 0x0000000F)
-#define MBED_ADC_CHAN(MBED_PIN) (MBED_PIN & 0x0000001F)
-
- // Use pseudo-pin ID also for ADCs, although with special handling
- SFP_ADC0_0 = MBED_PIN(0x19, 2, 0, 0), // ADC0_0
- SFP_ADC0_1 = MBED_PIN(0x19, 2, 0, 1), // ADC0_1
- SFP_ADC0_2 = MBED_PIN(0x19, 2, 0, 2), // ADC0_2
- SFP_ADC0_3 = MBED_PIN(0x19, 2, 0, 3), // ADC0_3
- SFP_ADC0_4 = MBED_PIN(0x19, 2, 0, 4), // ADC0_4
- SFP_ADC0_5 = MBED_PIN(0x19, 2, 0, 5), // ADC0_5
- SFP_ADC0_6 = MBED_PIN(0x19, 2, 0, 6), // ADC0_6
-
- SFP_ADC1_0 = MBED_PIN(0x19, 3, 1, 0), // ADC1_0
- SFP_ADC1_1 = MBED_PIN(0x19, 3, 1, 1), // ADC1_1
- SFP_ADC1_2 = MBED_PIN(0x19, 3, 1, 2), // ADC1_2
- SFP_ADC1_3 = MBED_PIN(0x19, 3, 1, 3), // ADC1_3
- SFP_ADC1_4 = MBED_PIN(0x19, 3, 1, 4), // ADC1_4
- SFP_ADC1_5 = MBED_PIN(0x19, 3, 1, 5), // ADC1_5
- SFP_ADC1_6 = MBED_PIN(0x19, 3, 1, 6), // ADC1_6
- SFP_ADC1_7 = MBED_PIN(0x19, 3, 1, 7), // ADC1_7
-*/
-
// Dedicated pin (no GPIO)
P_DED = MBED_PIN(0, 0, NO_GPIO, 0),
@@ -482,21 +457,23 @@
// ---------- LPCXpresso 4337 pins ----------
-#ifdef BOARD_REV_A // for Rev.A
- D0 = P2_1,
- D1 = P2_0,
- D2 = P1_20,
- D3 = P1_18,
- D4 = P1_16,
- D5 = P1_15,
- D6 = P1_4,
- D7 = P2_2,
- D8 = P1_0,
- D9 = P1_3,
+ D0 = P2_11,
+ D1 = P2_10,
+ D2 = P2_13,
+ D3 = P1_8,
+ D4 = P2_2,
+ D5 = P1_7,
+ D6 = P2_9,
+ D7 = P2_12,
+
+ D8 = P2_6,
+ D9 = P6_5,
D10 = P1_5,
- D11 = P0_1,
- D12 = P0_0,
- D13 = P1_19,
+ D11 = P1_4,
+ D12 = P1_3,
+ D13 = PF_4,
+ D14 = P2_3,
+ D15 = P2_4,
SDA = P2_3,
SCL = P2_4,
@@ -504,44 +481,10 @@
A1 = P4_1,
A2 = PF_8,
A3 = P7_5,
- A4 = P1_14,
+ A4 = NC,
A5 = P2_5,
- LED_GREEN = GPIO0_14,
- LED_RED = GPIO3_7,
- LED_BLUE = GPIO3_5,
-
- // Serial pins
- UART0_TX = P2_0,
- UART0_RX = P2_1,
- USBTX = UART0_TX,
- USBRX = UART0_RX,
-#else // for Rev.B
- D0 = P1_14,
- D1 = P3_4,
- D2 = P2_13,
- D3 = P1_8,
- D4 = P2_6,
- D5 = P1_7,
- D6 = P2_9,
- D7 = P2_2,
- D8 = P3_5,
- D9 = P1_2,
- D10 = P1_5,
- D11 = P1_4,
- D12 = P1_3,
- D13 = PF_4,
- SDA = P2_3,
- SCL = P2_4,
-
- A0 = P4_3,
- A1 = P4_1,
- A2 = PF_8,
- A3 = P7_5,
- A4 = P2_11,
- A5 = P2_5,
-
- LED_GREEN = P2_10,
+ LED_GREEN = P2_7,
LED_RED = P6_11,
LED_BLUE = P6_9,
@@ -552,7 +495,6 @@
UART1_RX = D0,
USBTX = UART0_TX,
USBRX = UART0_RX,
-#endif
I2C_SDA = SDA,
I2C_SDL = SCL,
@@ -562,46 +504,6 @@
LED3 = LED_GREEN,
LED4 = LED_RED,
-// UART1_TX = P5_6,
-// UART1_RX = P1_14,
-// UART2_TX = P2_10,
-// UART2_RX = P2_11,
-// UART3_TX = P2_3,
-// UART3_RX = P2_4,
-
-/*
- // Analog pins
- ADC4 = P4_3,
- ADC2 = P4_1,
- ADC0 = P7_4,
- ADC1 = P7_5,
- ADC3 = P7_7,
- DAC0 = P4_4,
-*/
-
- // USB pins
- //P_USB0_TX = SFP_USB1,
- //P_USB0_RX = SFP_USB1,
-
-
-/*
- // PWM pins
- // 210E 210 200E 200
- // ---- ---- ---- ----
- PWM1 = P1_7, // J9-3 J9-3 S2-3 S2-3
- PWM2 = P7_6, // J9-8 J9-8 S4-6 S4-6
- PWM3 = P6_12, // J10-1 J10-1 S10-3 n/p
- PWM4 = P4_6, // J10-3 J10-3 S2-6 S2-6
- PWM5 = P7_5, // J8-2 J8-2 S4-4 S4-4
- PWM6 = P4_1, // J8-3 J8-3 S3-4 S3-4
- PWM7 = P7_7, // J8-4 J8-4 S4-5 S4-5
- PWM8 = P2_8, // J12-4 n/p S8-3 n/p
- PWM9 = P2_9, // J12-6 n/p S9-3 n/p
- PWM10 = P7_1, // J13-5 n/p S9-8 n/p
- PWM11 = P7_0, // J13-6 n/p S9-9 n/p
- PWM12 = P1_5, // J14-7 n/p S10-6 n/p
-*/
-
// ---------- End of LPCXpresso 4337 pins ----------
} PinName;