mbed library sources. Supersedes mbed-src.
Fork of mbed-dev by
Diff: targets/hal/TARGET_NUVOTON/TARGET_NUC472/TARGET_NUMAKER_PFM_NUC472/PinNames.h
- Revision:
- 144:ef7eb2e8f9f7
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/hal/TARGET_NUVOTON/TARGET_NUC472/TARGET_NUMAKER_PFM_NUC472/PinNames.h Fri Sep 02 15:07:44 2016 +0100 @@ -0,0 +1,116 @@ +/* mbed Microcontroller Library + * Copyright (c) 2015-2016 Nuvoton + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_PINNAMES_H +#define MBED_PINNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define NU_PORT_SHIFT 12 +#define NU_PINNAME_TO_PORT(name) ((unsigned int)(name) >> NU_PORT_SHIFT) +#define NU_PINNAME_TO_PIN(name) ((unsigned int)(name) & ~(0xFFFFFFFF << NU_PORT_SHIFT)) +#define NU_PORT_N_PIN_TO_PINNAME(port, pin) ((((unsigned int) (port)) << (NU_PORT_SHIFT)) | ((unsigned int) (pin))) +#define NU_PORT_BASE(port) ((GPIO_T *)(((uint32_t) GPIOA_BASE) + 0x40 * port)) +#define NU_MFP_POS(pin) ((pin % 8) * 4) +#define NU_MFP_MSK(pin) (0xful << NU_MFP_POS(pin)) + +typedef enum { + PIN_INPUT, + PIN_OUTPUT +} PinDirection; + +typedef enum { + PullNone = 0, + PullDown, + PullUp, + + PushPull, + OpenDrain, + Quasi, + + PullDefault = PullUp, +} PinMode; + +typedef enum { + // Not connected + NC = (int)0xFFFFFFFF, + + // Generic naming + PA_0 = NU_PORT_N_PIN_TO_PINNAME(0, 0), PA_1, PA_2, PA_3, PA_4, PA_5, PA_6, PA_7, PA_8, PA_9, PA_10, PA_11, PA_12, PA_13, PA_14, PA_15, + PB_0 = NU_PORT_N_PIN_TO_PINNAME(1, 0), PB_1, PB_2, PB_3, PB_4, PB_5, PB_6, PB_7, PB_8, PB_9, PB_10, PB_11, PB_12, PB_13, PB_14, PB_15, + PC_0 = NU_PORT_N_PIN_TO_PINNAME(2, 0), PC_1, PC_2, PC_3, PC_4, PC_5, PC_6, PC_7, PC_8, PC_9, PC_10, PC_11, PC_12, PC_13, PC_14, PC_15, + PD_0 = NU_PORT_N_PIN_TO_PINNAME(3, 0), PD_1, PD_2, PD_3, PD_4, PD_5, PD_6, PD_7, PD_8, PD_9, PD_10, PD_11, PD_12, PD_13, PD_14, PD_15, + PE_0 = NU_PORT_N_PIN_TO_PINNAME(4, 0), PE_1, PE_2, PE_3, PE_4, PE_5, PE_6, PE_7, PE_8, PE_9, PE_10, PE_11, PE_12, PE_13, PE_14, PE_15, + PF_0 = NU_PORT_N_PIN_TO_PINNAME(5, 0), PF_1, PF_2, PF_3, PF_4, PF_5, PF_6, PF_7, PF_8, PF_9, PF_10, PF_11, PF_12, PF_13, PF_14, PF_15, + PG_0 = NU_PORT_N_PIN_TO_PINNAME(6, 0), PG_1, PG_2, PG_3, PG_4, PG_5, PG_6, PG_7, PG_8, PG_9, PG_10, PG_11, PG_12, PG_13, PG_14, PG_15, + PH_0 = NU_PORT_N_PIN_TO_PINNAME(7, 0), PH_1, PH_2, PH_3, PH_4, PH_5, PH_6, PH_7, PH_8, PH_9, PH_10, PH_11, PH_12, PH_13, PH_14, PH_15, + PI_0 = NU_PORT_N_PIN_TO_PINNAME(8, 0), PI_1, PI_2, PI_3, PI_4, PI_5, PI_6, PI_7, PI_8, PI_9, PI_10, PI_11, PI_12, PI_13, PI_14, PI_15, + + // Arduino UNO naming + A0 = PE_1, + A1 = PE_2, + A2 = PE_3, + A3 = PE_4, + A4 = PE_5, + A5 = PE_12, + A6 = PE_13, + A7 = PE_14, + + D0 = PG_1, + D1 = PG_2, + D2 = PF_9, + D3 = PF_10, + D4 = PC_10, + D5 = PC_11, + D6 = PA_10, + D7 = PA_9, + D8 = PD_7, + D9 = PD_6, + D10 = PD_3, + D11 = PD_2, + D12 = PD_1, + D13 = PD_0, + D14 = PD_12, + D15 = PD_10, + + // FIXME: other board-specific naming + // UART naming + USBTX = PD_5, + USBRX = PD_4, + STDIO_UART_TX = USBTX, + STDIO_UART_RX = USBRX, + // LED naming + LED1 = PD_9, + LED2 = PA_4, + LED3 = PD_8, + LED4 = D0, // No real LED. Just for passing ATS. + LED_RED = LED1, + LED_GREEN = LED2, + LED_BLUE = LED3, + // Button naming + SW1 = PC_12, + SW2 = PC_13, + +} PinName; + +#ifdef __cplusplus +} +#endif + +#endif // MBED_PINNAMES_H