Rtos API example
BusIn Class Reference
[Drivers]
A digital input bus, used for reading the state of a collection of pins. More...
#include <BusIn.h>
Inherits NonCopyable< BusIn >.
Public Member Functions | |
BusIn (PinName p0, PinName p1=NC, PinName p2=NC, PinName p3=NC, PinName p4=NC, PinName p5=NC, PinName p6=NC, PinName p7=NC, PinName p8=NC, PinName p9=NC, PinName p10=NC, PinName p11=NC, PinName p12=NC, PinName p13=NC, PinName p14=NC, PinName p15=NC) | |
Create an BusIn, connected to the specified pins. | |
BusIn (PinName pins[16]) | |
Create an BusIn, connected to the specified pins. | |
int | read () |
Read the value of the input bus. | |
void | mode (PinMode pull) |
Set the input pin mode. | |
int | mask () |
Binary mask of bus pins connected to actual pins (not NC pins) If bus pin is in NC state make corresponding bit will be cleared (set to 0), else bit will be set to 1. | |
operator int () | |
A shorthand for read() | |
DigitalIn & | operator[] (int index) |
Access to particular bit in random-iterator fashion. | |
Private Member Functions | |
MBED_DEPRECATED ("Invalid copy construction of a NonCopyable resource.") NonCopyable(const NonCopyable &) | |
NonCopyable copy constructor. | |
MBED_DEPRECATED ("Invalid copy assignment of a NonCopyable resource.") NonCopyable &operator | |
NonCopyable copy assignment operator. |
Detailed Description
A digital input bus, used for reading the state of a collection of pins.
- Note:
- Synchronization level: Thread safe
Definition at line 32 of file BusIn.h.
Constructor & Destructor Documentation
BusIn | ( | PinName | p0, |
PinName | p1 = NC , |
||
PinName | p2 = NC , |
||
PinName | p3 = NC , |
||
PinName | p4 = NC , |
||
PinName | p5 = NC , |
||
PinName | p6 = NC , |
||
PinName | p7 = NC , |
||
PinName | p8 = NC , |
||
PinName | p9 = NC , |
||
PinName | p10 = NC , |
||
PinName | p11 = NC , |
||
PinName | p12 = NC , |
||
PinName | p13 = NC , |
||
PinName | p14 = NC , |
||
PinName | p15 = NC |
||
) |
Create an BusIn, connected to the specified pins.
- Parameters:
-
p0 DigitalIn pin to connect to bus bit p1 DigitalIn pin to connect to bus bit p2 DigitalIn pin to connect to bus bit p3 DigitalIn pin to connect to bus bit p4 DigitalIn pin to connect to bus bit p5 DigitalIn pin to connect to bus bit p6 DigitalIn pin to connect to bus bit p7 DigitalIn pin to connect to bus bit p8 DigitalIn pin to connect to bus bit p9 DigitalIn pin to connect to bus bit p10 DigitalIn pin to connect to bus bit p11 DigitalIn pin to connect to bus bit p12 DigitalIn pin to connect to bus bit p13 DigitalIn pin to connect to bus bit p14 DigitalIn pin to connect to bus bit p15 DigitalIn pin to connect to bus bit
- Note:
- It is only required to specify as many pin variables as is required for the bus; the rest will default to NC (not connected)
BusIn | ( | PinName | pins[16] ) |
Member Function Documentation
int mask | ( | ) |
void mode | ( | PinMode | pull ) |
operator int | ( | ) |
DigitalIn & operator[] | ( | int | index ) |
Generated on Sun Jul 17 2022 08:25:43 by 1.7.2