File content as of revision 0:9fca2b23d0ba:

/* mbed Microcontroller Library
 * Copyright (c) 2017 ARM Limited
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */
#ifndef MBED_SLICING_BLOCK_DEVICE_H
#define MBED_SLICING_BLOCK_DEVICE_H

#include "BlockDevice.h"
#include "mbed.h"


/** Block device for mapping to a slice of another block device
 *
 *  @code
 *  #include "mbed.h"
 *  #include "HeapBlockDevice.h"
 *  #include "SlicingBlockDevice.h"
 *
 *  // Create a block device with 64 blocks of size 512
 *  HeapBlockDevice mem(64*512, 512);
 *
 *  // Create a block device that maps to the first 32 blocks
 *  SlicingBlockDevice slice1(&mem, 0*512, 32*512);
 *
 *  // Create a block device that maps to the last 32 blocks
 *  SlicingBlockDevice slice2(&mem, 32*512);
 *
 *  // Create a block device that maps to the middle 32 blocks
 *  SlicingBlockDevice slice3(&mem, 16*512, -16*512);
 * @endcode
 */
class SlicingBlockDevice : public BlockDevice
{
public:
    /** Lifetime of the memory block device
     *
     *  @param bd       Block device to back the SlicingBlockDevice
     *  @param start    Start block address to map to block 0, negative addresses
     *                  are calculated from the end of the underlying block device
     *  @param end      End block address to mark the end of the block device,
     *                  this block is not mapped, negative addresses are
     *                  calculated from the end of the underlying block device.
     *                  The default stops at end of the underlying block device.
     */
    SlicingBlockDevice(BlockDevice *bd, bd_addr_t start, bd_addr_t end = 0);

    /** Lifetime of a block device
     */
    virtual ~SlicingBlockDevice() {};

    /** Initialize a block device
     *
     *  @return         0 on success or a negative error code on failure
     */
    virtual int init();

    /** Deinitialize a block device
     *
     *  @return         0 on success or a negative error code on failure
     */
    virtual int deinit();

    /** Read blocks from a block device
     *
     *  @param buffer   Buffer to read blocks into
     *  @param addr     Address of block to begin reading from
     *  @param size     Size to read in bytes, must be a multiple of read block size
     *  @return         0 on success, negative error code on failure
     */
    virtual int read(void *buffer, bd_addr_t addr, bd_size_t size);

    /** Program blocks to a block device
     *
     *  The blocks must have been erased prior to being programmed
     *
     *  @param buffer   Buffer of data to write to blocks
     *  @param addr     Address of block to begin writing to
     *  @param size     Size to write in bytes, must be a multiple of program block size
     *  @return         0 on success, negative error code on failure
     */
    virtual int program(const void *buffer, bd_addr_t addr, bd_size_t size);

    /** Erase blocks on a block device
     *
     *  The state of an erased block is undefined until it has been programmed
     *
     *  @param addr     Address of block to begin erasing
     *  @param size     Size to erase in bytes, must be a multiple of erase block size
     *  @return         0 on success, negative error code on failure
     */
    virtual int erase(bd_addr_t addr, bd_size_t size);

    /** Get the size of a readable block
     *
     *  @return         Size of a readable block in bytes
     */
    virtual bd_size_t get_read_size() const;

    /** Get the size of a programable block
     *
     *  @return         Size of a programable block in bytes
     *  @note Must be a multiple of the read size
     */
    virtual bd_size_t get_program_size() const;

    /** Get the size of a eraseable block
     *
     *  @return         Size of a eraseable block in bytes
     *  @note Must be a multiple of the program size
     */
    virtual bd_size_t get_erase_size() const;

    /** Get the total size of the underlying device
     *
     *  @return         Size of the underlying device in bytes
     */
    virtual bd_size_t size() const;

protected:
    BlockDevice *_bd;
    bool _start_from_end;
    bd_size_t _start;
    bool _stop_from_end;
    bd_size_t _stop;
};


#endif