File content as of revision 0:9fca2b23d0ba:

/* Copyright (C) 2012 mbed.org, MIT License
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of this software
 * and associated documentation files (the "Software"), to deal in the Software without restriction,
 * including without limitation the rights to use, copy, modify, merge, publish, distribute,
 * sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all copies or
 * substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
 * BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
 * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 */

#ifndef LWIPOPTS_H
#define LWIPOPTS_H

#if MBED_CONF_LWIP_ETHERNET_ENABLED
#include "lwipopts_conf.h"
#endif

// Workaround for Linux timeval
#if defined (TOOLCHAIN_GCC)
#define LWIP_TIMEVAL_PRIVATE 0
#include <sys/time.h>
#endif

// Operating System 
#define NO_SYS                      0

#if MBED_CONF_LWIP_IPV4_ENABLED
#define LWIP_IPV4                   1
#else
#define LWIP_IPV4                   0
#endif
#if MBED_CONF_LWIP_IPV6_ENABLED
#define LWIP_IPV6                   1
#else
#define LWIP_IPV6                   0
#endif
#if !MBED_CONF_LWIP_IPV4_ENABLED && !MBED_CONF_LWIP_IPV6_ENABLED
#error "Either IPv4 or IPv6 must be enabled."
#endif

// On dual stack configuration how long to wait for both or preferred stack
// addresses before completing bring up.
#if LWIP_IPV4 && LWIP_IPV6
#if MBED_CONF_LWIP_ADDR_TIMEOUT_MODE
#define BOTH_ADDR_TIMEOUT           MBED_CONF_LWIP_ADDR_TIMEOUT
#define PREF_ADDR_TIMEOUT           0
#else
#define PREF_ADDR_TIMEOUT           MBED_CONF_LWIP_ADDR_TIMEOUT
#define BOTH_ADDR_TIMEOUT           0
#endif
#else
#define PREF_ADDR_TIMEOUT           0
#define BOTH_ADDR_TIMEOUT           0
#endif

#define DHCP_TIMEOUT                60

#define PREF_IPV4                   1
#define PREF_IPV6                   2

#if MBED_CONF_LWIP_IP_VER_PREF == 4
#define IP_VERSION_PREF             PREF_IPV4
#endif
#if MBED_CONF_LWIP_IP_VER_PREF == 6
#define IP_VERSION_PREF             PREF_IPV6
#endif
#ifndef IP_VERSION_PREF
#error "Either IPv4 or IPv6 must be preferred."
#endif

#undef  LWIP_DEBUG
#if MBED_CONF_LWIP_DEBUG_ENABLED
#define LWIP_DEBUG                  1
#endif

#if NO_SYS == 0
#include "cmsis_os2.h"

#define SYS_LIGHTWEIGHT_PROT        1

#define LWIP_RAW                    0

#define TCPIP_MBOX_SIZE             8
#define DEFAULT_TCP_RECVMBOX_SIZE   8
#define DEFAULT_UDP_RECVMBOX_SIZE   8
#define DEFAULT_RAW_RECVMBOX_SIZE   8
#define DEFAULT_ACCEPTMBOX_SIZE     8

// Thread stack size for lwip tcpip thread
#ifndef MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE
#define MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE      1200
#endif

#ifdef LWIP_DEBUG
#define TCPIP_THREAD_STACKSIZE      MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE*2
#else
#define TCPIP_THREAD_STACKSIZE      MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE
#endif

#define TCPIP_THREAD_PRIO           (osPriorityNormal)

// Thread stack size for lwip system threads
#ifndef MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE
#define MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE    512
#endif

// Thread stack size for private PPP thread
#ifndef MBED_CONF_LWIP_PPP_THREAD_STACKSIZE
#define MBED_CONF_LWIP_PPP_THREAD_STACKSIZE    768
#endif

#ifdef LWIP_DEBUG
#define DEFAULT_THREAD_STACKSIZE    MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE*2
#define PPP_THREAD_STACK_SIZE       MBED_CONF_LWIP_PPP_THREAD_STACKSIZE*2
#else
#define DEFAULT_THREAD_STACKSIZE    MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE
#define PPP_THREAD_STACK_SIZE       MBED_CONF_LWIP_PPP_THREAD_STACKSIZE
#endif

#define MEMP_NUM_SYS_TIMEOUT        16

#define sys_msleep(ms) sys_msleep(ms)

#endif

// 32-bit alignment
#define MEM_ALIGNMENT               4

#define LWIP_RAM_HEAP_POINTER       lwip_ram_heap

// Number of pool pbufs.
// Each requires 684 bytes of RAM (if MSS=536 and PBUF_POOL_BUFSIZE defaulting to be based on MSS)
#ifdef MBED_CONF_LWIP_PBUF_POOL_SIZE
#undef PBUF_POOL_SIZE
#define PBUF_POOL_SIZE              MBED_CONF_LWIP_PBUF_POOL_SIZE
#else
#ifndef PBUF_POOL_SIZE
#define PBUF_POOL_SIZE              5
#endif
#endif

#ifdef MBED_CONF_LWIP_PBUF_POOL_BUFSIZE
#undef PBUF_POOL_BUFSIZE
#define PBUF_POOL_BUFSIZE           MBED_CONF_LWIP_PBUF_POOL_BUFSIZE
#endif

#ifdef MBED_CONF_LWIP_MEM_SIZE
#undef MEM_SIZE
#define MEM_SIZE                    MBED_CONF_LWIP_MEM_SIZE
#endif

// One tcp_pcb_listen is needed for each TCPServer.
// Each requires 72 bytes of RAM.
#ifdef MBED_CONF_LWIP_TCP_SERVER_MAX
#define MEMP_NUM_TCP_PCB_LISTEN     MBED_CONF_LWIP_TCP_SERVER_MAX
#else
#define MEMP_NUM_TCP_PCB_LISTEN     4
#endif

// One is tcp_pcb needed for each TCPSocket.
// Each requires 196 bytes of RAM.
#ifdef MBED_CONF_LWIP_TCP_SOCKET_MAX
#define MEMP_NUM_TCP_PCB            MBED_CONF_LWIP_TCP_SOCKET_MAX
#else
#define MEMP_NUM_TCP_PCB            4
#endif

// One udp_pcb is needed for each UDPSocket.
// Each requires 84 bytes of RAM (total rounded to multiple of 512).
#ifdef MBED_CONF_LWIP_UDP_SOCKET_MAX
#define MEMP_NUM_UDP_PCB            MBED_CONF_LWIP_UDP_SOCKET_MAX
#else
#define MEMP_NUM_UDP_PCB            4
#endif

// Number of non-pool pbufs.
// Each requires 92 bytes of RAM.
#ifndef MEMP_NUM_PBUF
#define MEMP_NUM_PBUF               8
#endif

// Each netbuf requires 64 bytes of RAM.
#ifndef MEMP_NUM_NETBUF
#define MEMP_NUM_NETBUF             8
#endif

// One netconn is needed for each UDPSocket, TCPSocket or TCPServer.
// Each requires 236 bytes of RAM (total rounded to multiple of 512).
#ifdef MBED_CONF_LWIP_SOCKET_MAX
#define MEMP_NUM_NETCONN            MBED_CONF_LWIP_SOCKET_MAX
#else
#define MEMP_NUM_NETCONN            4
#endif

#if MBED_CONF_LWIP_TCP_ENABLED
#define LWIP_TCP                    1
#define TCP_QUEUE_OOSEQ             0
#define TCP_OVERSIZE                0
#define LWIP_TCP_KEEPALIVE          1
#else
#define LWIP_TCP                    0
#endif

#define LWIP_DNS                    1
#define LWIP_SOCKET                 0

#define SO_REUSE                    1

// Support Multicast
#include "stdlib.h"
#define LWIP_IGMP                   LWIP_IPV4
#define LWIP_RAND()                 lwip_get_random()

#define LWIP_COMPAT_SOCKETS         0
#define LWIP_POSIX_SOCKETS_IO_NAMES 0
#define LWIP_SO_RCVTIMEO            1

#define LWIP_BROADCAST_PING         1

// Fragmentation on, as per IPv4 default
#define LWIP_IPV6_FRAG              LWIP_IPV6

// Queuing "disabled", as per IPv4 default (so actually queues 1)
#define LWIP_ND6_QUEUEING           0

// Debug Options
#define NETIF_DEBUG                 LWIP_DBG_OFF
#define PBUF_DEBUG                  LWIP_DBG_OFF
#define API_LIB_DEBUG               LWIP_DBG_OFF
#define API_MSG_DEBUG               LWIP_DBG_OFF
#define SOCKETS_DEBUG               LWIP_DBG_OFF
#define ICMP_DEBUG                  LWIP_DBG_OFF
#define IGMP_DEBUG                  LWIP_DBG_OFF
#define INET_DEBUG                  LWIP_DBG_OFF
#define IP_DEBUG                    LWIP_DBG_OFF
#define IP_REASS_DEBUG              LWIP_DBG_OFF
#define RAW_DEBUG                   LWIP_DBG_OFF
#define MEM_DEBUG                   LWIP_DBG_OFF
#define MEMP_DEBUG                  LWIP_DBG_OFF
#define SYS_DEBUG                   LWIP_DBG_OFF
#define TIMERS_DEBUG                LWIP_DBG_OFF
#define TCP_DEBUG                   LWIP_DBG_OFF
#define TCP_INPUT_DEBUG             LWIP_DBG_OFF
#define TCP_FR_DEBUG                LWIP_DBG_OFF
#define TCP_RTO_DEBUG               LWIP_DBG_OFF
#define TCP_CWND_DEBUG              LWIP_DBG_OFF
#define TCP_WND_DEBUG               LWIP_DBG_OFF
#define TCP_OUTPUT_DEBUG            LWIP_DBG_OFF
#define TCP_RST_DEBUG               LWIP_DBG_OFF
#define TCP_QLEN_DEBUG              LWIP_DBG_OFF
#define UDP_DEBUG                   LWIP_DBG_OFF
#define TCPIP_DEBUG                 LWIP_DBG_OFF
#define SLIP_DEBUG                  LWIP_DBG_OFF
#define DHCP_DEBUG                  LWIP_DBG_OFF
#define AUTOIP_DEBUG                LWIP_DBG_OFF
#define DNS_DEBUG                   LWIP_DBG_OFF
#define IP6_DEBUG                   LWIP_DBG_OFF

#if MBED_CONF_LWIP_ENABLE_PPP_TRACE
#define PPP_DEBUG                   LWIP_DBG_ON
#else
#define PPP_DEBUG                   LWIP_DBG_OFF
#endif //MBED_CONF_LWIP_ENABLE_PPP_TRACE
#define ETHARP_DEBUG                LWIP_DBG_OFF
#define UDP_LPC_EMAC                LWIP_DBG_OFF

#ifdef LWIP_DEBUG
#define MEMP_OVERFLOW_CHECK         1
#define MEMP_SANITY_CHECK           1
#define LWIP_DBG_TYPES_ON           LWIP_DBG_ON
#define LWIP_DBG_MIN_LEVEL          LWIP_DBG_LEVEL_ALL
#else
#define LWIP_NOASSERT               1
#define LWIP_STATS                  0
#endif

#define TRACE_TO_ASCII_HEX_DUMP     0

#define LWIP_PLATFORM_BYTESWAP      1

#define LWIP_RANDOMIZE_INITIAL_LOCAL_PORTS 1

// Interface type configuration

#if MBED_CONF_LWIP_ETHERNET_ENABLED
#define LWIP_ARP                    1
#define LWIP_ETHERNET               1
#define LWIP_DHCP                   LWIP_IPV4
#else
#define LWIP_ARP                    0
#define LWIP_ETHERNET               0
#endif // MBED_CONF_LWIP_ETHERNET_ENABLED

// Note generic macro name used rather than MBED_CONF_LWIP_PPP_ENABLED
// to allow users like PPPCellularInterface to detect that nsapi_ppp.h is available.
#if NSAPI_PPP_AVAILABLE
#define PPP_SUPPORT                    1
#if MBED_CONF_LWIP_IPV6_ENABLED
#define PPP_IPV6_SUPPORT               1
// Disable DAD for PPP
#define LWIP_IPV6_DUP_DETECT_ATTEMPTS  0
#endif
#define CHAP_SUPPORT                   1
#define PPP_INPROC_IRQ_SAFE            1
// Save RAM
#define PAP_SUPPORT                    0
#define VJ_SUPPORT                     0
#define PRINTPKT_SUPPORT               0

// Broadcast
#define IP_SOF_BROADCAST               0
#define IP_SOF_BROADCAST_RECV          0

#define MAXNAMELEN                     64     /* max length of hostname or name for auth */
#define MAXSECRETLEN                   64
#endif // NSAPI_PPP_AVAILABLE

// Make sure we default these to off, so
// LWIP doesn't default to on
#ifndef LWIP_ARP
#define LWIP_ARP                    0
#endif
// Checksum-on-copy disabled due to https://savannah.nongnu.org/bugs/?50914
#define LWIP_CHECKSUM_ON_COPY       0

#define LWIP_NETIF_HOSTNAME         1
#define LWIP_NETIF_STATUS_CALLBACK  1
#define LWIP_NETIF_LINK_CALLBACK    1

#define DNS_TABLE_SIZE                  2
#define DNS_MAX_NAME_LENGTH             128

#include "lwip_random.h"
#include "lwip_tcp_isn.h"
#define LWIP_HOOK_TCP_ISN lwip_hook_tcp_isn
#ifdef MBEDTLS_MD5_C
#include "mbedtls/inc/mbedtls/md5.h"
#define LWIP_USE_EXTERNAL_MBEDTLS 1
#endif

#endif /* LWIPOPTS_H_ */