Marco Zecchini
Rtos API example
Diff: mbed-os/features/filesystem/bd/MBRBlockDevice.h
- Revision:
- 0:9fca2b23d0ba
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/mbed-os/features/filesystem/bd/MBRBlockDevice.h Sat Feb 23 12:13:36 2019 +0000
@@ -0,0 +1,227 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2017 ARM Limited
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef MBED_MBR_BLOCK_DEVICE_H
+#define MBED_MBR_BLOCK_DEVICE_H
+
+#include "BlockDevice.h"
+#include "mbed.h"
+
+
+/** Additional error codes used for MBR records
+ */
+enum {
+ BD_ERROR_INVALID_MBR = -3101,
+ BD_ERROR_INVALID_PARTITION = -3102,
+};
+
+
+/** Block device for managing a Master Boot Record
+ * https://en.wikipedia.org/wiki/Master_boot_record
+ *
+ * Here is an example of partitioning a heap backed block device
+ * @code
+ * #include "mbed.h"
+ * #include "HeapBlockDevice.h"
+ * #include "MBRBlockDevice.h"
+ *
+ * // Create a block device with 64 blocks of size 512
+ * HeapBlockDevice mem(64*512, 512);
+ *
+ * // Partition into two partitions with ~half the blocks
+ * MBRBlockDevice::partition(&mem, 1, 0x83, 0*512, 32*512);
+ * MBRBlockDevice::partition(&mem, 2, 0x83, 32*512);
+ *
+ * // Create a block device that maps to the first 32 blocks (excluding MBR block)
+ * MBRBlockDevice part1(&mem, 1);
+ *
+ * // Create a block device that maps to the last 32 blocks
+ * MBRBlockDevice part2(&mem, 2);
+ * @endcode
+ *
+ * Here is a more realistic example where the MBRBlockDevice is used
+ * to partition a region of space on an SD card. When plugged into a computer,
+ * the partitions will be recognized appropriately.
+ * @code
+ * #include "mbed.h"
+ * #include "SDBlockDevice.h"
+ * #include "MBRBlockDevice.h"
+ * #include "FATFileSystem.h"
+ *
+ * // Create an SD card
+ * SDBlockDevice sd(s0, s1, s2, s3);
+ *
+ * // Create a partition with 1 GB of space
+ * MBRBlockDevice::partition(&sd, 1, 0x83, 0, 1024*1024);
+ *
+ * // Create the block device that represents the partition
+ * MBRBlockDevice part1(&sd, 1);
+ *
+ * // Format the partition with a FAT filesystem
+ * FATFileSystem::format(&part1);
+ *
+ * // Create the FAT filesystem instance, files can now be written to
+ * // the FAT filesystem in partition 1
+ * FATFileSystem fat("fat", &part1);
+ * @endcode
+ */
+class MBRBlockDevice : public BlockDevice
+{
+public:
+ /** Format the MBR to contain the following partition
+ *
+ * @param bd Block device to partition
+ * @param part Partition to use, 1-4
+ * @param type 8-bit partition type to identitfy partition's contents
+ * @param start Start block address to map to block 0 of partition,
+ * negative addresses are calculated from the end of the
+ * underlying block devices. Block 0 is implicitly ignored
+ * from the range to store the MBR.
+ * @return 0 on success or a negative error code on failure
+ * @note This is the same as partition(bd, part, type, start, bd->size())
+ */
+ static int partition(BlockDevice *bd, int part, uint8_t type, bd_addr_t start);
+
+ /** Format the MBR to contain the following partition
+ *
+ * @param bd Block device to partition
+ * @param part Partition to use, 1-4
+ * @param type 8-bit partition type to identitfy partition's contents
+ * @param start Start block address to map to block 0 of partition,
+ * negative addresses are calculated from the end of the
+ * underlying block devices. Block 0 is implicitly ignored
+ * from the range to store the MBR.
+ * @param stop End block address to mark the end of the partition,
+ * this block is not mapped, negative addresses are calculated
+ * from the end of the underlying block device.
+ * @return 0 on success or a negative error code on failure
+ */
+ static int partition(BlockDevice *bd, int part, uint8_t type, bd_addr_t start, bd_addr_t stop);
+
+ /** Lifetime of the block device
+ *
+ * @param bd Block device to back the MBRBlockDevice
+ * @param part Partition to use, 1-4
+ */
+ MBRBlockDevice(BlockDevice *bd, int part);
+
+ /** Lifetime of the block device
+ */
+ virtual ~MBRBlockDevice() {};
+
+ /** Initialize a block device
+ *
+ * @return 0 on success or a negative error code on failure
+ */
+ virtual int init();
+
+ /** Deinitialize a block device
+ *
+ * @return 0 on success or a negative error code on failure
+ */
+ virtual int deinit();
+
+ /** Read blocks from a block device
+ *
+ * @param buffer Buffer to read blocks into
+ * @param addr Address of block to begin reading from
+ * @param size Size to read in bytes, must be a multiple of read block size
+ * @return 0 on success, negative error code on failure
+ */
+ virtual int read(void *buffer, bd_addr_t addr, bd_size_t size);
+
+ /** Program blocks to a block device
+ *
+ * The blocks must have been erased prior to being programmed
+ *
+ * @param buffer Buffer of data to write to blocks
+ * @param addr Address of block to begin writing to
+ * @param size Size to write in bytes, must be a multiple of program block size
+ * @return 0 on success, negative error code on failure
+ */
+ virtual int program(const void *buffer, bd_addr_t addr, bd_size_t size);
+
+ /** Erase blocks on a block device
+ *
+ * The state of an erased block is undefined until it has been programmed
+ *
+ * @param addr Address of block to begin erasing
+ * @param size Size to erase in bytes, must be a multiple of erase block size
+ * @return 0 on success, negative error code on failure
+ */
+ virtual int erase(bd_addr_t addr, bd_size_t size);
+
+ /** Get the size of a readable block
+ *
+ * @return Size of a readable block in bytes
+ */
+ virtual bd_size_t get_read_size() const;
+
+ /** Get the size of a programable block
+ *
+ * @return Size of a programable block in bytes
+ * @note Must be a multiple of the read size
+ */
+ virtual bd_size_t get_program_size() const;
+
+ /** Get the size of a eraseable block
+ *
+ * @return Size of a eraseable block in bytes
+ * @note Must be a multiple of the program size
+ */
+ virtual bd_size_t get_erase_size() const;
+
+ /** Get the total size of the underlying device
+ *
+ * @return Size of the underlying device in bytes
+ */
+ virtual bd_size_t size() const;
+
+ /** Get the offset of the partition on the underlying block device
+ * @return Offset of the partition on the underlying device
+ */
+ virtual bd_addr_t get_partition_start() const;
+
+ /** Get size of partition on underlying block device
+ * @return Size of the partition on the underlying device
+ */
+ virtual bd_addr_t get_partition_stop() const;
+
+ /** Get 8-bit type of the partition
+ * @return 8-bit type of partition assigned during format
+ */
+ virtual uint8_t get_partition_type() const;
+
+ /** Get the partition number
+ * @return The partition number, 1-4
+ */
+ virtual int get_partition_number() const;
+
+protected:
+ BlockDevice *_bd;
+ bd_size_t _offset;
+ bd_size_t _size;
+ uint8_t _type;
+ uint8_t _part;
+};
+
+
+#endif